That's actually my 60v 10X scooter. I recognize it from the scratches on the front right fork and T bar on the handlebars. They had possession of it on the day of this video. I had sent it back to them under warrantee. Had some controller issues they needed to diagnose. They asked me if I wanted to replace the tires with some fatter ones. I agreed since my tires were bold. I had a flat in the rear so that's why I put slime in it. I'm happy they replaced the rear tube and didn't reuse it. I got it shipped back to me just a few days ago and the fat street tires are great. They have much better cornering grip. I definitely recommend them over the stock ones. Somehow I got it back with missing rear fender though. I wonder what happened to it since he didn't take it off. They're shipping me a new one.
Very useful, very well explained and without any rush, really appreciated. And, finally, an English tutorial on how to change the Zero10x tyres. We need more content like this one, maybe even more technical content like e.g. how to replace the controller, etc..
Thanks for the video from Australia :) Clear and concise language plus good video framing and editing. You covered everything I needed to know to change my tires.
Great video, thanks for the time and effort to put this together. You described the wrong motors though, the first one is the 1000W, and the 2nd one is the 1200W. Just FYI for all the ppl at home. 1200W is annoying because when you split the rim, the tyre is on the inside of the motor.
I love those videos........they´re so instructive and helpful!.......I live in Brazil and there are not many scooter services in my area.....I sort of try as much as I can to learn from these informative videos and go all by myself when I need fixing the day by day issues!....Congrats Rev Rides U.S Team!!!!!!
My new street tires just arrived can't wait to install them. They arrived quickly from Rev Rides as well. Great Customer Service and efficient shipping speed. I have one question though, what is the name of that T shaped Allen tool you are using in the video to remove the split rim.
Should I carry this kit at all times while riding? How easy it is to perform out on the road? If I remember right with the Inokim OX you don't have to take the wheel out to replace the tube...
You are right, with the Inokim OX you do not have to take the wheel off you just need to lay the scooter on its side and use a tire iron to get the job done. Just be sure and check your tire for the cause of the puncture. As for the kit it wouldn't hurt to bring a couple tire irons and a new tube along for the ride, it all depends how comfortable you are with changing the tube on the go. Here is a good video showing how to change the tube on the Inokim OX (th-cam.com/video/yzh75Cx2Rpo/w-d-xo.html). He was very informative for that brand scooter. Thank you for the comment!
@@RevRides360 Yes! I watched that exact video before sending that comment haha. Although I have to say, he got the easy wheel done, as the rear wheel would be bit more challenging. As motor is there, some cables would have to be disassembled, and screws loosen, would probably have to jack the scooter to keep things clean and tidy there.
will a 255x80 tire fit the 10 inch rim was told by scooter shop owner that it would fit after i have taken of my 2.50x10 tire is this write or will that tire not fit but the shop owner watched a video on youtube an said it would is this correct thank you for your video on how to change a tire easy to follow
I've gotten my first puncture. More of a hard impact burst to the inner tube. Riding over uneven terrain. I have the same zero as in the video. It looks a lot easier than I imagined. Might get the semi offroad tyre to replace it. I'm around the 850km mark and couldn't be happier with it. Got it the beginning of June, not so warm now in the UK so doubt I'll use it so much.
Very helpful. I have a question tho, after you inflate the tire does it wobble when spinning? I have a new vsett 9+ and the rear tire has a slight wobble which makes the scooter vibrate at faster speed and is felt the most on smooth surfaces. How can I propperly align the tire to the rim to calibrate it?
I just finished patching a slow leaking tube on my 52V. It actually wasn’t as bad as I thought it was gonna be. I was REALLY dreading doing it, relieved it wasn’t really hard. Just make sure you empty ALL the air out of the tube 1st!
Hi, I got a flat tire on my scooter and need to replace the tire. I was looking around and there are Vacuum Tubeless tires out there that are the same size. Would those work? Or would I have to use only the ones that come with tubes?
Couple of things to note. You can’t put wheel back on back unless you remove hydraulic brake When putting hub together be careful of pinching tube between the two half’s of rim hub
thank you for this ¨how to video¨ hope you have more fix and maintenance tips. New subscriber here... 2 thumbs up. Disc brakes replacement and maintenance would be a good one.
I was told by Revrides that they wouldn't but falconPEV that all three will, but that you need to get a different rear fender since it isn't wide enough to accommodate any of the hybrid/wide/ off-road tires. I'm interested in the wide or hybrid as well for the rear just to give better traction since the stock ones aren't that great. If you check out th-cam.com/video/h0UeRkGb874/w-d-xo.html he's got the hybrid on his zero10....so they must work.
How do I get the glue your using to put on all the screws? Also the tool your using to remove the screws from the brake rotor how can I get that tool? The tool that it came with when I got my scooter was not the right size
Hey Patrick, medium strength threadlocker can be purchased at most automotive or hardware stores. We are using the Fix-It-Sticks in this video, they are available on REVRides.com. Thanks!
Hi i've really enjoyed your videos, can you help. I came off my Janobike x10 not travelling very fast but now it has a very irritating vibration. I've looked and everything seems tight and nothing bent, do you think it could be the tyre. Thanks
When I split the rim, on the inside surfaces, IE; where the tube comes into contact with the rim. I found the machining tool marks a bit rough. Could cause puncturing down the track. Sooo I lined it with gaffer tape. What do you think? Cheers Jeff
Anyone using this video to change an Apollo Pro, if you have the 52v version you will need to follow the instructions for the 60v, because it is setup the same as the current 52v Apollo. Pro.
Those punctures, looked to be right on the inside seam where the two wheel halves join. On a bicycle wheel, there'd be a tape ring protecting the tube from wearing on the spokes. Is this a flaw in the design? I don't recall the last time I had a flat with my bicycle tires, yet after about 100 km on a scooter, I'm watching this video.
Hey John, these punctures were on the outside orientation, and there was debris that had punctured the tire and tube in this case. We do not see tubes needing repair because of the inside seam with proper installation, and do not believe this to be an issue in this design.
About to buy the 10x and have been offered the all terrain tyres free of charge fitted to the scooter. About 70% of the time I’ll be riding on the road and the other 30% off road, are the all terrain the best tyres to go for? Also, I’ve read the 10x has a problem with the electric controller deep inside the scooter which heats up and eventually breaks, would love to know if this is common and how to avoid it if possible? Last question is with the tyre wobble at high speeds and the need to buy a dampener kit, is this easy to attach as I’m tech illiterate and could fuck up toasting bread if let near the toaster!
There is no official torque specification guide at this time for ZERO. We typically consult industry standards for the bolt/stud size. Axle nuts and plastic threads are the exception. 40 ft-lbs is adequate for the swingarm nuts.
I dont understand. I have the 52 volt version. But I split my rim from left side where the disc brake is. And my valve goes through the rim on the right side. Yours is the other way around
dear rev rides. i wanna ask what size of tubes are you using of those zero and vsett scooters? cuz i see that the tires are 10"x3" and everyone is selling smaller tubes like 10"x2" or 10"x2,5". cant you plz help me? i wanna buy one of those scooter but the smaller inner tube problem is a deal breaker for me. :(
@@RevRides360 ahhh ok!! thank you very much for clearing that up! it was bothering me for a long time! i already got a scooter for about 3 years now and i am looking to upgrade to a better one. :) best of wishes!
Very soon. Please check our website for stock alerts. You can add your email address to any item you are wanting to be notified when it is back in stock. On the item's page, if it is out of stock, you will get a pop-up window that says "email when available".
Extremely helpful video guys 🙂 I have a turbo wheel lightning + and I just got my first flat today lol. The tube is completely gone 🤦🏽♂️ looking forward to replace the entire tire and tube very soon
Great, thanks, but my main nut is 21mm on the X10 and I could not fit the wheel back onto the frame without loosening the suspension arms to give way for the inner washers. On the whole I am not tech. savvy but if you follow this video almost anyone can do this. Very grateful for this.
man i came here looking for your comment. i just got a Zero X10 and from all the videos i have watched, everyone shows the axle nut to be 17.5/18mm but mine appears to be over 20 and as such, i do not have the right tools to open the nut lol. i thought to myself, whats going on - why is mine bigger ?!?! do you happen to know wht some zero 10x models have larger nuts ?
@@s77lom49 not sure, but I think they are made at different factories and each uses the resources of stock which they have. It also may be an engineering change on the newer models. Who knows.... China has no rules.
@@DANKERBRIAN Yes, thank you for replying. i found out that the nut was changed to a larger one - so those videos showing the smaller nut (17.5 mm) are from an earlier version of the scooter. the later versions use a 20mm nut. thanks anyway man !
Can you let us know what those repair lift tables are called so we can purchase one? Maybe share a link in the response. Thanks and great information videos.
Tyler I followed your instructions. All is good but the tire seems to wobble a bit but when I press the accelerator more it seems fine. This is on the the jack of course. Any idea if that’s normal? Thanks in advance.
We use motorcycle stands! Here is a link (www.amazon.com/Extreme-Max-5001-5059-Motorcycle-Scissor/dp/B01LW1FKXX/ref=asc_df_B01LW1FKXX/?tag=hyprod-20&linkCode=df0&hvadid=312061076067&hvpos=&hvnetw=g&hvrand=14323759217935291870&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033604&hvtargid=pla-499807472877&psc=1&tag=&ref=&adgrpid=61856009493&hvpone=&hvptwo=&hvadid=312061076067&hvpos=&hvnetw=g&hvrand=14323759217935291870&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033604&hvtargid=pla-499807472877).
well done great job another super awesome amazing video thank you so much for sharing keep up the fantastic work thank you so much on the tutorial how to change the tire have a blessed day
Try deflating the tire to about 10-15psi the push ride the scooter on flat ground then reflate the tire. Repeat until tire is seated properly. Hope that was helpful! For further questions contact service@revrides.com
The Urban tires are louder on pavement than stock, but it is not considered a large difference from most users. We have never had anyone complain that they are too loud. The knobby offroad tires are considerably louder. Hope that helps.
Hello, is it possible you do not have the correct tube? The valve stem must be angled, not straight, or else you will have issues with the valve stem routing.
@@RevRides360 thanks for reply. The valve is on the correct angle. My front tire & tube fitted without problems . On this rear no matter how i fit it always bulges near the valve.
Less than 2 hours of Varla, 2 flat tires, more time youtube how to repair tire than playing/riding. Found tire has two metal wires poking out. Does the tire made with wires?
Yes, these tires have metal wire on the edge. You must have a defective tire or the metal wire broke when you hit a pot hole or the edge of a curb or something. I would recommend contacting Varla and getting it covered by warranty. Next time buy from REV Rides. :-)
I have furo fuze which is pretty much a overpriced copy of kugo m4. I’m having hard time finding solid tyres 10x3 from trusted seller , I currently have standard HOTA tyres but I had 4 punctures in 2 months . My question is will 10x2.5 solid tyre or honeycomb tyre still fit???
Hi guys! Thanks for the great video!. You apply 40 ft-lb (54,2 Nw-m) on the tire axle nuts...Is that torque ok for zero 8x as well? Where could we find torque numbers for several nuts on the 10x/8x? Mainly brake disc screws/ motor hub cover, but also Torque on the suspension nuts (swing arm)? Thank you so much :)
Hey Jordi, the axle on the 8X is smaller. We typically apply 35 ft-lb to the 8X axle and swing arm nuts. The disc rotor screws are torqued to 6-nm, and we highly recommend a medium strength threadlocker. At this time there is not a torque spec guide from ZERO for their models.
That's actually my 60v 10X scooter. I recognize it from the scratches on the front right fork and T bar on the handlebars. They had possession of it on the day of this video. I had sent it back to them under warrantee. Had some controller issues they needed to diagnose. They asked me if I wanted to replace the tires with some fatter ones. I agreed since my tires were bold. I had a flat in the rear so that's why I put slime in it. I'm happy they replaced the rear tube and didn't reuse it.
I got it shipped back to me just a few days ago and the fat street tires are great. They have much better cornering grip. I definitely recommend them over the stock ones. Somehow I got it back with missing rear fender though. I wonder what happened to it since he didn't take it off. They're shipping me a new one.
That's a great mystery, I need to know the fate of the mysteriously disappearing fender lol
I never put dirty parts back on a scooter I like to clean the parts before reinstalling them.
What’s the size of your new tires? plannin to ipgrade mine.
@@paulllanera6307 3" wide street tires. Diameter is the same 10".
Do you know if those tyres fit Zero 10 aswell?
Very useful, very well explained and without any rush, really appreciated. And, finally, an English tutorial on how to change the Zero10x tyres. We need more content like this one, maybe even more technical content like e.g. how to replace the controller, etc..
Glad you liked it! We'll get more content out soon.
Where to buy 10 inch tires
Great and helpful video for all Zero 10X owners. Tyler is a natural!
yeah and so many videos don't show the tools needed upfront. Very well done
Guessing the torque spec for the swingarm bolts is also 40 ft lbs? or am i mistaken?
Thanks for the video from Australia :) Clear and concise language plus good video framing and editing. You covered everything I needed to know to change my tires.
Great video, thanks for the time and effort to put this together. You described the wrong motors though, the first one is the 1000W, and the 2nd one is the 1200W. Just FYI for all the ppl at home. 1200W is annoying because when you split the rim, the tyre is on the inside of the motor.
The new opening looks amazing
Sorry - one more silly question. 18mm open wrench and 17mm socket?
@@andromedazoowitski5903 18mm socket as well, we will make the correction.
I love those videos........they´re so instructive and helpful!.......I live in Brazil and there are not many scooter services in my area.....I sort of try as much as I can to learn from these informative videos and go all by myself when I need fixing the day by day issues!....Congrats Rev Rides U.S Team!!!!!!
Just ordered mine the other day from you guys. Can’t wait till it gets here. I’m upgrading from a Boosted Rev that I’ve put 2600mi. On. :-)
Seriously appreciate the business and trust in our brand. You are going to love it!
My new street tires just arrived can't wait to install them. They arrived quickly from Rev Rides as well. Great Customer Service and efficient shipping speed. I have one question though, what is the name of that T shaped Allen tool you are using in the video to remove the split rim.
But why does the tire dont come off the rims that easy i got all the screws out but. It feels like its glued to the rims any ideas
I'm having the same issue. Feels like the tires are glued to the rim and i can't pull it off.
Hi are all the model of the zero10x stock tire size were all 10'x2.5 ,thanks
Should I carry this kit at all times while riding? How easy it is to perform out on the road?
If I remember right with the Inokim OX you don't have to take the wheel out to replace the tube...
You are right, with the Inokim OX you do not have to take the wheel off you just need to lay the scooter on its side and use a tire iron to get the job done. Just be sure and check your tire for the cause of the puncture. As for the kit it wouldn't hurt to bring a couple tire irons and a new tube along for the ride, it all depends how comfortable you are with changing the tube on the go. Here is a good video showing how to change the tube on the Inokim OX (th-cam.com/video/yzh75Cx2Rpo/w-d-xo.html). He was very informative for that brand scooter. Thank you for the comment!
@@RevRides360 Yes! I watched that exact video before sending that comment haha.
Although I have to say, he got the easy wheel done, as the rear wheel would be bit more challenging.
As motor is there, some cables would have to be disassembled, and screws loosen, would probably have to jack the scooter to keep things clean and tidy there.
will a 255x80 tire fit the 10 inch rim was told by scooter shop owner that it would fit after i have taken of my 2.50x10 tire is this write or will that tire not fit but the shop owner watched a video on youtube an said it would is this correct thank you for your video on how to change a tire easy to follow
Best video out there for changing tyres.....👍👍👍👍
Thank you Jon. We love doing these and will be pumping out more helpful tech video's this year.
Can you guys make a video on how to replace new stem on 10x please.
Are this and the Varla Eagle One the same? They look identical
Cool, grâce a toi j'ai réussi a changer les pneu facilement, le coup du savon est un réel plus merci, bonne continuation
I've gotten my first puncture. More of a hard impact burst to the inner tube. Riding over uneven terrain.
I have the same zero as in the video. It looks a lot easier than I imagined.
Might get the semi offroad tyre to replace it.
I'm around the 850km mark and couldn't be happier with it. Got it the beginning of June, not so warm now in the UK so doubt I'll use it so much.
I have two stripped bolts holding my brake disc on
Any ideas where I can take it to get it fixed.
Hey what about solid rubber tires I found the same size can you put those on
Some are prone to slipping off!
good video but why were you blurring out that it was a zero 10X ?
Very helpful. I have a question tho, after you inflate the tire does it wobble when spinning? I have a new vsett 9+ and the rear tire has a slight wobble which makes the scooter vibrate at faster speed and is felt the most on smooth surfaces. How can I propperly align the tire to the rim to calibrate it?
We recommend deflating the tire to about 15 psi then ride slowly for about 1000ft then re inflate the tire
What do you do when it straps out
Can you please provide a link to the device you are resting the scooter on, and a link to the motorcycle stand holding the tire.
I just finished patching a slow leaking tube on my 52V.
It actually wasn’t as bad as I thought it was gonna be. I was REALLY dreading doing it, relieved it wasn’t really hard.
Just make sure you empty ALL the air out of the tube 1st!
Good job getting it fixed! Good tip for sure!
Hi, I got a flat tire on my scooter and need to replace the tire. I was looking around and there are Vacuum Tubeless tires out there that are the same size. Would those work? Or would I have to use only the ones that come with tubes?
Excellent stuff. What's the rated PSI on those tires. I plan on purchasing the Zero 10X shortly. Thanks
40-45 PSI for the Tires
Hi, I want to know how to replace a scooter tire (GTR V2) It's very difficult?
What if the split rim doesn't release after all the bolts are out?
Couple of things to note. You can’t put wheel back on back unless you remove hydraulic brake
When putting hub together be careful of pinching tube between the two half’s of rim hub
Great advice. Thank you.
I have a Varla One Eagle. I believe it's the same as 10x just rebranded? Will this work the same?
yes
@@michaelpayton9475 thank u
thank you for this ¨how to video¨ hope you have more fix and maintenance tips. New subscriber here... 2 thumbs up. Disc brakes replacement and maintenance would be a good one.
Great video 👍 does anyone know if "zero 10x wide road tire" will fit for zero 10 scooter?
Thank you.
And for techlife x7s did it fit?
I was told by Revrides that they wouldn't but falconPEV that all three will, but that you need to get a different rear fender since it isn't wide enough to accommodate any of the hybrid/wide/ off-road tires. I'm interested in the wide or hybrid as well for the rear just to give better traction since the stock ones aren't that great. If you check out th-cam.com/video/h0UeRkGb874/w-d-xo.html he's got the hybrid on his zero10....so they must work.
Could you do a front tire change video because it is much different and harder
What are you having a hard time with?
Only one question... Why is the dedicated offroad tyre a square profile?
This is the only tire available to us in this size. If you find another that fits please let us know so we can get them in stock for everyone!
How do I get the glue your using to put on all the screws? Also the tool your using to remove the screws from the brake rotor how can I get that tool? The tool that it came with when I got my scooter was not the right size
Hey Patrick, medium strength threadlocker can be purchased at most automotive or hardware stores. We are using the Fix-It-Sticks in this video, they are available on REVRides.com. Thanks!
torque rating for the Control arms that go into the scooter's base?
Another question. Will the 10 x 2 innertube work on this tire?
Yes, with a 90 degree valve
It will work!
Thans for reply:)
Hi i've really enjoyed your videos, can you help. I came off my Janobike x10 not travelling very fast but now it has a very irritating vibration. I've looked and everything seems tight and nothing bent, do you think it could be the tyre. Thanks
Thank you for commenting! For any service inquiries please email us at service@revrides.com!
When I split the rim, on the inside surfaces, IE; where the tube comes into contact with the rim. I found the machining tool marks a bit rough. Could cause puncturing down the track. Sooo I lined it with gaffer tape. What do you think?
Cheers
Jeff
Can I Inflate my front tire without removal? I can’t get the valve cap off. The rear wheel was easy, front not so much!
Anyone using this video to change an Apollo Pro, if you have the 52v version you will need to follow the instructions for the 60v, because it is setup the same as the current 52v Apollo. Pro.
cool video, and simple to do, whats the name or model of the pump ?
where abouts can i get a back up set of zero 10x axel wheel nuts
Those punctures, looked to be right on the inside seam where the two wheel halves join. On a bicycle wheel, there'd be a tape ring protecting the tube from wearing on the spokes. Is this a flaw in the design? I don't recall the last time I had a flat with my bicycle tires, yet after about 100 km on a scooter, I'm watching this video.
Hey John, these punctures were on the outside orientation, and there was debris that had punctured the tire and tube in this case. We do not see tubes needing repair because of the inside seam with proper installation, and do not believe this to be an issue in this design.
Thanks for the Vid. This video just gave me more confidence to fix my flat tire.
About to buy the 10x and have been offered the all terrain tyres free of charge fitted to the scooter. About 70% of the time I’ll be riding on the road and the other 30% off road, are the all terrain the best tyres to go for? Also, I’ve read the 10x has a problem with the electric controller deep inside the scooter which heats up and eventually breaks, would love to know if this is common and how to avoid it if possible? Last question is with the tyre wobble at high speeds and the need to buy a dampener kit, is this easy to attach as I’m tech illiterate and could fuck up toasting bread if let near the toaster!
are there bearings under the front arm connection?
at the joint where the movement is allowed?
are there bearings behind the nut?
Thanks for reaching out! Please follow up with us at Service@REVrides.com for further assistance.
Hi, my wheels are without air ducts, if I put it do you think it would be a problem for the wheel that I have the engine?
last tire is wrongly put? the direction
Do you know if these would fit a Kugoo G2 Pro?
Witch inner tube i need i have a flat on my inner tube
torque numbers for swing arm
Where can I get all the data of this?
There is no official torque specification guide at this time for ZERO. We typically consult industry standards for the bolt/stud size. Axle nuts and plastic threads are the exception. 40 ft-lbs is adequate for the swingarm nuts.
3:25 - You can wrap a rag over the screwdriver in order to protect the paint while prying...
I have Zero 10. Is it the same way changing tires and tubes with the Zero 10?
Can you make a video about installing 10X3 tires for dualtron eagle?
Hello, we do not carry this model, and will most likely not be making a video. Have a great day!
I dont understand. I have the 52 volt version. But I split my rim from left side where the disc brake is. And my valve goes through the rim on the right side. Yours is the other way around
We’re did you get the bench from?
Do the tires fit on varla eagle one
We can not confirm for other models. If the numbers match then yes.
dear rev rides. i wanna ask what size of tubes are you using of those zero and vsett scooters? cuz i see that the tires are 10"x3" and everyone is selling smaller tubes like 10"x2" or 10"x2,5". cant you plz help me? i wanna buy one of those scooter but the smaller inner tube problem is a deal breaker for me. :(
We use the smaller tubes as they fit better and are less likely to be pinched. Hope to see you on a scooter soon!
@@RevRides360 ahhh ok!! thank you very much for clearing that up! it was bothering me for a long time! i already got a scooter for about 3 years now and i am looking to upgrade to a better one. :) best of wishes!
Great video thank you for the info but can you guy do a video on the p settings for the vsett 10+ there r some but don't understand french .
Yes, we will do a P settings video for VSETT soon. Cheers.
Can I use the tyre on my kugoo m4???
Can I put does tires in my varla scooter cuz I will like fat tires .
Very helpful. When will you have more wider tires and tubes back in stock?
Very soon. Please check our website for stock alerts. You can add your email address to any item you are wanting to be notified when it is back in stock. On the item's page, if it is out of stock, you will get a pop-up window that says "email when available".
Extremely helpful video guys 🙂
I have a turbo wheel lightning + and I just got my first flat today lol. The tube is completely gone 🤦🏽♂️ looking forward to replace the entire tire and tube very soon
Glad that our video was helpful. That's why we are here.
Great, thanks, but my main nut is 21mm on the X10 and I could not fit the wheel back onto the frame without loosening the suspension arms to give way for the inner washers.
On the whole I am not tech. savvy but if you follow this video almost anyone can do this. Very grateful for this.
man i came here looking for your comment. i just got a Zero X10 and from all the videos i have watched, everyone shows the axle nut to be 17.5/18mm but mine appears to be over 20 and as such, i do not have the right tools to open the nut lol. i thought to myself, whats going on - why is mine bigger ?!?!
do you happen to know wht some zero 10x models have larger nuts ?
@@s77lom49 not sure, but I think they are made at different factories and each uses the resources of stock which they have. It also may be an engineering change on the newer models. Who knows.... China has no rules.
@@DANKERBRIAN Yes, thank you for replying. i found out that the nut was changed to a larger one - so those videos showing the smaller nut (17.5 mm) are from an earlier version of the scooter. the later versions use a 20mm nut.
thanks anyway man !
@@s77lom49 mine uses 22 🤷. Had to stretch suspension to fit back the wheel.
Hello Zero 10x 60v 21ah problem help?
Where can I get the rear axel the one the holds the rear forks I have looked I can’t find it can you help
Thanks for the comment - please email service@revrides.com for more assistance with finding this part.
Can you let us know what those repair lift tables are called so we can purchase one? Maybe share a link in the response. Thanks and great information videos.
Look on Amazon for scissor lift motorcycle stand.
Tyler I followed your instructions. All is good but the tire seems to wobble a bit but when I press the accelerator more it seems fine. This is on the the jack of course. Any idea if that’s normal? Thanks in advance.
Hello! Yes, that is considered normal. As long as the vibration is not noticeable while riding, there should be no issue. :)
@@RevRides360 ok great thank you ☺️
Hi I have a varla eagle one you think that tire will fit my varla cuz I want to change the skinny ones
Thanks for reaching out to REV Rides! Feel free to send us an email at Service@REVRides.com for more assistance!
is that a custom made escooter holder or i can buy it some where?
We use motorcycle stands! Here is a link (www.amazon.com/Extreme-Max-5001-5059-Motorcycle-Scissor/dp/B01LW1FKXX/ref=asc_df_B01LW1FKXX/?tag=hyprod-20&linkCode=df0&hvadid=312061076067&hvpos=&hvnetw=g&hvrand=14323759217935291870&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033604&hvtargid=pla-499807472877&psc=1&tag=&ref=&adgrpid=61856009493&hvpone=&hvptwo=&hvadid=312061076067&hvpos=&hvnetw=g&hvrand=14323759217935291870&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033604&hvtargid=pla-499807472877).
6:00 ish he says he will re use tube and also says good time to replace tube I am confused
Hi I have a varla eagle one and I want to change the tires should I get does for streets road will they fit .please help me with that .
Sammy, please feel free to contact us at Service@Revrides.com with any questions. Cheers!
Thanks for a great video.
Quick question : my rear brakes are touching the disk now. Hmm what did i miss?
You will need to adjust your caliper/pads.
REV Rides same it makes a super fast clicking sound when I break. I’ll loock up how to do that
The washers must go on the inside of the forks. Except for lock tab washer, which ensures pad and caliper are in basically correct position.
Locktite on bolts? I hope you can open those screws again, without destroying head of those bolts....
Rear Wheel: Is it the outside washers that have the "tongue" or "tab" on them? ..and they go forward?
Yes, those washers are on the outside of the swingarm, with tabs facing in and towards the deck of the scooter.
Very nice tutorial 👍👍👍
how strong you tighten wheels with a torque wrench? Thanks.. awesome video!!
We tighten the axle nuts to 70 pounds on the torque wrench.
@@RevRides360 thank you very much.. do you know howmuch is that in kg,s?
Do you know if the D6+ can handle front and rear 10x3 or only 10x2.5 front and 10x3 rear
Hei. Great video. What can i get the "table" you are using and, where can i get the lufting device you use to lift 10x?
Hello, we are using hydraulic motorcycle lifts from redlinestands.com. :)
well done great job another super awesome amazing video thank you so much for sharing keep up the fantastic work thank you so much on the tutorial how to change the tire have a blessed day
How do you balance it???
Try deflating the tire to about 10-15psi the push ride the scooter on flat ground then reflate the tire. Repeat until tire is seated properly. Hope that was helpful! For further questions contact service@revrides.com
@@RevRides360
Thanks, I'll try it out tomorrow.
Are the Urban Offroad tires much louder than the onroad? I like that the stock tires are super quiet.
The Urban tires are louder on pavement than stock, but it is not considered a large difference from most users. We have never had anyone complain that they are too loud. The knobby offroad tires are considerably louder. Hope that helps.
@@RevRides360 awesome thanks
Clear clean instructions thank you just what I wanted you got yourself a new subscriber
Hello i have the x tron x10 scooter is it the same Modell as the zero 10 ? And tyre?
Can't be 100% certain but, it sure looks like it is the same base scooter as the Zero 10X.
Tire wobble after. Any tips?
Same here
What should i do if i cant properly align the valve through the motor? When it goes through it leaves a bulge in the tube. My model is 60v.
Hello, is it possible you do not have the correct tube? The valve stem must be angled, not straight, or else you will have issues with the valve stem routing.
@@RevRides360 thanks for reply. The valve is on the correct angle. My front tire & tube fitted without problems . On this rear no matter how i fit it always bulges near the valve.
Could it be this particular tire or tube causing the problem? 3.0 wide road tire
Those swing arms is heavy duty aren't they but heavy I think making it 70lbs over the apollo ghost. Do rev make lighter swing arms to down the weight?
We do not have lighter swingarms. We wouldn't recommend lighter as the swingarms might not be able to handle rugged conditions as well.
Is there any chance you can go on pnuematic tires for the zero8x?
Less than 2 hours of Varla, 2 flat tires, more time youtube how to repair tire than playing/riding. Found tire has two metal wires poking out. Does the tire made with wires?
Yes, these tires have metal wire on the edge. You must have a defective tire or the metal wire broke when you hit a pot hole or the edge of a curb or something. I would recommend contacting Varla and getting it covered by warranty. Next time buy from REV Rides. :-)
Anyone know the name of the jack lift he's using to lift the scooter?
www.extrememax.com/product-p/5001.5059.htm
I have furo fuze which is pretty much a overpriced copy of kugo m4. I’m having hard time finding solid tyres 10x3 from trusted seller , I currently have standard HOTA tyres but I had 4 punctures in 2 months . My question is will 10x2.5 solid tyre or honeycomb tyre still fit???
What stand is the scooter sitting on?
It is a motorcycle scissor lift. Available on Amazon.
My “split ring” is impossible to get out, am I doing something wrong? Literally pulling it with all my strength
Please follow up with us via email (Service@REVRides.com) for further assitance.
nice video !! BTW Im planning to change my tire to tubeless one, would it be possible with that type or rims(don't know the exact term)?
Tubeless isn't a good idea on a split rim design like the 10X. It will be very difficult to seal the air properly.
Does this tire fit the zero 10
Useful video, what psi would you recommend in those tyres?
We recommend 45-50 PSI in all of our 10" tires.
How do you remove a stripped screw from the brake router?
Hey Patrick, I would use some heat on the screw, and purchase a screw extractor kit. Thanks!
Hi guys! Thanks for the great video!. You apply 40 ft-lb (54,2 Nw-m) on the tire axle nuts...Is that torque ok for zero 8x as well? Where could we find torque numbers for several nuts on the 10x/8x? Mainly brake disc screws/ motor hub cover, but also Torque on the suspension nuts (swing arm)? Thank you so much :)
Hey Jordi, the axle on the 8X is smaller. We typically apply 35 ft-lb to the 8X axle and swing arm nuts. The disc rotor screws are torqued to 6-nm, and we highly recommend a medium strength threadlocker. At this time there is not a torque spec guide from ZERO for their models.
@@RevRides360 Many thanks for your reply :)