ฝัง
- เผยแพร่เมื่อ 12 เม.ย. 2021
- We hope this video helps you change your VSETT 10+ tire. If you have any questions that weren't covered in this video, please contact us at revrides.com.
Stay in the loop:
Instagram: REVrides_official
Facebook: www.Facebook.com/REVrides - ยานยนต์และพาหนะ
![[Vsett 10+] Change Tire Inner Tube](http://i.ytimg.com/vi/BnJAr9Nomxk/mqdefault.jpg)
2 years later and this is still the best Vsett 10+ tire change video! Great work again RevRides! Using it today just to refresh my memory as I put on the PMTs!
Glad it's been useful.
Changing tire for first time this year. I didn’t have to remove fender but I removed the two left screws to get the motor cable to the left side for room to work on the tire
Love that you gave torque specs! Thxs!!
this was extremely helpful! Much easier than changing tire on EUC and a lot less can go wrong!
just did my first tube change, thanks for the video guys!
Hey Tyler love your videos I just ordered a vsett 10plus is there any way you can do a video on the PO settings does a couple of videos but they are a different language thanks
Great video and very helpful, thanks!
Just curious why you used newton meters for the small bolts but foot pounds for the wheels axle?
I mean in the end it's only a matter of converting the metrics but I found it a little interesting anyway...😉
Great video. Thank you so much!
Got my first flat on my VSETT 10+, thanks for the tutorial, very helpful. Thank you!!!
Glad we can help!
I definitely strip three of the screws lol I sued regular Alan keys had to do it with the rotor on worked it was a struggle
GENIAL VUESTRO TUTORIAL, AMO EL VSETT DESDE QUE LO CONOCÍ POR TH-cam, GRACIAS POR COMPARTIR EL GENIAL TUTORIAL
Loving the video format, could you guys do a video on replacing front swing arms??
Muchas gracias chicos, genial, me salvaron, saludos desde Colombia
Does the whole assembly just line back up perfectly when you fasten it to the swingarm? I took my front wheel off to install a steering damper and it seems I could be +\- .25” in either direction which could affect brake rotor movement as well.
Great Video Tyler!
Thanks man!
Hello, nice video ! Can I use excerpts from the video (without sound) to illustrate what I'm saying in my video?
This is for a french presentation video. Thank you for your reply. Yours sincerely 😉
Thank you so much! I was dreading changing this tube and it made it really easy to follow. Explaining how much torque to use is a great idea, too often overlooked.
You guys rock!
Basically this is applied to all electrical scooters ❤, thank you
very helpfull! , I just change mine, i didnt need to take the brake disc but thank you very very helpfull.
Can you please show how to programme phones to key reader and explain how it’s security system works if it’s any good? Cheers your videos are just so good since there is not a lot of people that can help in some towns
I patched up the inner tube on my VSETT 10+ today, and there is no need at all to remove the brake rotor or caliper. It is still somewhat of a hassle, but at least a couple of steps are of the list. Also, there was no loctite at all on the 6 screws that keep the rim together.
You're definitely right.
You are correct.
How are you going to reach the rim bolts they are in the way no?
@@sohaibalmahagri589 No, it's fine.
Hey for some reason my vsett 10+ tire won’t take in any air I’ve only had it for 6 days the gold pice that you put the air in on the tire I’m able to wiggle it noticeably more than the front tire so just wondering should I get a new tire or inner tube or even both? Also what other things should I get to decrease the chance of this happening again
Man my break rotor screws were in their so tight, one of them got stripped 😢....ANY ADVISE on how to get that bolt out???
Nice work guys.
Thanks Ginger on Wheels! Hope to catch you back in the shop soon.
@@RevRides360 with the EX.N floating around in stock soon I think its inevitable ill be showing up sooner than later.
Thanks for this Tyler - gotta do my first tube change this weekend
Glad to help!
Is it really necessary to go through all this steps just to replace a tube?
I'm a newbie to this kind of handy stuff and I don't even have the required tools/glues.
Man awesome video!
Thank you so much! It was a fun one.
do guys know the torque specs for 19mm nut on swing arm is it the same as the 21mm nut? 50ftlbs?
Nice video! 👍
Thanks Cameron!
Does anyone know where to source the button head screws to the rotor? 3 of mine came stripped with a bent rotor so after I find a way to get them out I'll need more.
Thanks for the vid mate. I need to replace the tube in the rear tyre. Weird thing is I see nothing in the outside tire. No nail, nothing. It just went without air....
Good video.
I would like to know how you adjust the suspension. What is the tool needed and do you need to remove the rear wheel to do so?
Thanks, Frank
Hello, most users us a pair of channel lock pliers to twist the preload adjustment on the Front and rear springs. This typically damages the paint on the shock, but at this time there is not a better method. Removing the wheel is not required. Thanks!
Super helpful for when I have to change everything. Is there a Manuel you guys have that shows all the areas and how much you have to torque them
Thanks for reaching out! Feel free to follow up with Service@REVRides.com for any specific questions you may have!
Hey. Could you make this same guide for the Vsett 11+ / Super 72? Thx.
Wow, this is INFINITELY EASIER than my Emove Cruiser tire change!!
I need to get the vsett 10+ ASAP!!
PROVE IT!!!!!
Thank you for a great video. I have great use of it at the moment. I punktured my rear tire after just 20 km. My bad. I should have pumped the tire harder from the start.
I wonder, where do you buy a new tube for vsett 10+? And i also wonder if you have a pump to recommend? Thank you again.
Another very strange thing. My valvestem was sitting together with the tire. Impossible to move...
When I replaced my tube after i popped the original I found that they put a tube that was bigger that it was supposed to be in my tire so it was a disaster from the beginning
Concerning the pump, I just use the air compressor at work or at the gas station, but I think any hand pump will do nicely. You won't use it often, so I wouldn't splurge too much on it. Just make sure it is compatible with the flexible hose you received in your VSETT accessory bag, since most pump heads are too big to reach and actuate the valve.
Innertube - Aliexpress - Horrible delivery times, but cheap: www.aliexpress.com/item/4000593813390.html?spm=a2g0o.order_list.0.0.12da1802nKjDM2
Innertubes - Amazon:
www.amazon.com/s?k=innertube+10x2.5&sprefix=innertube+10x2%2Caps%2C155&ref=nb_sb_ss_ts-doa-p_1_14
thanks man, that was easy to deal with...
Glad it helped
Good job👌👌 very Profesional
Thank you!
What are the measurements of the camera because I changed it and there have been two punctures already?
At the moment i own a zero 10 x
Love it!
But i need more range!
Would you recommend the vsett 10+R a must upgrade???
Thanks for reaching out! We recommend the VSETT 10+R or the Vsett 11+!
Brother thank you i finally manage to get the tube in lmao 😂 i was F*** up the thing i didnt blew any air in the tube than took a jump to gas station and manage to get it in at first
Bonjour à combien de newton-metre serrez vous toutes vos vis ? s'il vous plaît merci.
this is great thanks so much! how would you say this compares to the wolf warrior?
Tough to compare unless you had specific metrics you wanted to compare. Weight, speed, ride comfort, high speed stability, off-road capability, customizability, etc. I do know that the VSETT 10+ is faster in a drag race than a wolf warrior.
@@RevRides360 how about an Apollo Phantom vs 10+ which is a better buy?
Can you link the tools you used please?
nice tutorial
Thank you! Cheers!
hi! nice video. where did you find that working bench? i need one exactly like that. thanks.
Amazon has them. Search for hydraulic motorcycle lift table. I think it's called Extreme Max.
@@RevRides360 thanks!
Hello, greetings from Chile, sorry for the translation. How much torque in NM do you give to each part, brake disc, wheel motor, and wheel bolts?
5
Good video
Glad you enjoyed it!
Hi guys just a quick question. If I was out and I happened to get a puncture would I be able to use the green slime preventer (green goo) as a temporary fix? Tia
It worked for me. I didn't even know I had a puncture until I saw green slime all over the back of the scooter the slime did its job after the tire pressure dropped. I had about 30-40 psi left when I got home and noticed it
Is the 40 ft lbs you used for this on the wheel lugs the same for the Vsett 11+?
Yes, the torque spec is the same on the VSETT 11+.
Would you say that all the hex bolts on the scooter should be tightened to the 5nm??
For further assistance, please reach out to us via email at Service@REVRides.com!
Anybody know where he got the platform with hole in the center ?
I hope you make video changing the bearings
Are u having problems with your bearings there is a guy that make a video on a different scooter I think it pretty much the same process on a vsett
I have a Vsett 10+ and in my p settings the tire diameter is set to 10 in. I'm hearing that if I set to 9.8 let's speedometer will be more accurate. Also if I change the number of magnets from 28, to the proper 30 it will help the speedo be more accurate. Any advice?
You can use the tire diameter to dial in speedometer. You'll just need a good way to calibrate the actual speed.
Don't change number of magnets.
hi friend. what is the name of that glue to fix the rubber shields on the nuts?.. thanks 👍
Thanks for reaching out! We like to use Gorilla Glue or a similarly strong adhesive! Have a great day!
I noticed the motor cable just clips to the frame. Do you have any concern for damage with the wire being exposed ?
The the cable has a spring around it so no damage or clipped cable no damage or problem
Hi! I tried to change to semi off road 10x3 tyres but the screws cant reach all the way. Do I have to buy longer screws or go back to the slippery PMT's? :/
Great question. You should use the same screws but may need some help from a friend to squeeze the tire by hand so that they two halves of the split rim are closer together.
@@RevRides360 alright! Also, when I unscrewed the rim with little force, it popped and there's a tiny crack. Can I still ride in a slow pace or can't ride it at all?
Sorry for the noob question but what that tool with the 5 newtons that you use?
See 1:04 in video. Variable torque bit driver.
Very useful video ！！！please don‘t delete it I gonna change mine soon🥲🥲🥲
I found a 13/16th AF socket was a better fit on the axle nuts that the 21mm. Thanks for the video, very helpful indeed.
Good tip! Glad the video was helpful :)
Was that an editing error? at th-cam.com/video/9anfrnhcgRs/w-d-xo.html you started to do the front wheel but only unwrapped the cabling and rewrapped it.
I made it until detaching the wheel. But the 6 Screws, that locks the wheel (4:13).
They are fastened so strongly, that i already broke one screwdriver while trying to loosen them.
I tried warm water and oil to make it easier but it wont come off at all... Any ideas what else i can do?
Feel free to reach out to our customer support team (Service@REVRides.com) for further assistance! Cheers!
Should the tire be able to move when reattaching the brake to the rotor?
Thanks for reaching out! For better assistance, send in a video of what you have going on to Service@REVRides.com. Cheers!
what is that hand green/teal hand drill for fixing screws? link on it?
That is a torque wrench and you can find them on Amazon!
You take the brake disc off to protect it, right? In the case why not just loosen the split rim bolts a little while the wheel is still mounted?
Then change the tire and tube, put the split rim back finger tight, replace the wheel and then torque up the bolts when the wheel is back in.
I know right. I was watching this and was like WTF!? This video is so whack.
awesome ide with rimm you dont need press or nothing !
Is tightening your wheel to 54Nm good idea? thank you
Please tell me where you guys get replacement bolts for the Vsett? I lost the split hub black bolts, anyone know the size of these things and where can I find replacement bolts..????HELPPPPP !
Thanks for reaching out, please follow up with us at Service@REVRides.com for further assistance. Cheers
Hi, thank you for this video. What glue for screw-thread you use?
We use Loctite or Permatex Medium strength threadlocker.
Thank you very much for your video !!
Could you make a video , showing how to change the suspension for the Vsett 10 ( rear and front ) please?? 🙏🙏 I would like to put air shock one but I am very bad at mechanic … 👍👍
Changing the suspension is a big job. We would recommend you take it to your local shop if you have one. If you are in the USA we have shops in nearly every major city that can work on your scooter. We will be doing a video on this in the future but it could be awhile. Cheers.
Many thanks for your answer . As you noticed ,my English is not very good .. 😁 I am French .. I will wait for your video or any video on TH-cam showing the way to do . Thank you very much
@@RevRides360 do you have any shops in the Minneapolis area? Looking at new suspension.
@@fabianc1650 bonjour, j'ai eu l'occasion de changer l'amortisseur avant ( et ce n'est pas du luxe ) celui d'origine est dangereux. Si tu vois ce commentaire n'hésite pas à me demander plus de précisions.
@@TheMXpower06 hello, what is wrong with the original shock?
my rear tire is flat and the slime is getting out of the tube i am on my way to a friends garage and use your video step by step and try to change it
i´ll will write you later how it went
greetings from Cologne Germany
How did it go?
That's an odd split rim! Mine the tires just pop off the opposite side. So it's not stuck on the engine wire. That's a dumb design
hello. what is the size of the tube for vsett10+ some guys told me its 10x2.5, the shop that i bought it told its 10x2 lol! im confuse thanks
Tubes for the VSETT 10+ are generally 10x2.0. The tire size is 10x3. That could be the confusion. If you could get a 10x2.5 tube it would be fine but those are harder to come by.
Can gou guys able to oder more of vsett 10+,kaabo wolf warriors models as only scooter is such hard to fund its all zold of off any online scooters stores in any local states
I've always wanted them vsett10+ or any kaabo wolf warriors models
One day we need to see them vsett 9+ with 60v40ah that be insane to keeping up most of any scooters 💯👌
vsett scooters is what we carry
does it have a connection that i can unplug it to the contoller?
Yes, there is a plug to disconnect the controller.
is it possible to switch to solid rubber tires?
Hello, we do not recommend switching to solid tires on the VSETT 10+. This scooter is too powerful for solid tires, and causes a safety concern.
tyres on the spit rim types are super easy, most struggle with the ninebot, m365 tyres
Yeah I don't mind them at all. The 11" tires are a bit harder, but these 8.5" and 10" tires are easy. Thanks for stopping by!
Tyler what is the exact screw size for the disc brake rotor and split rim? Also why don't retailers make information like that known so we can buy more in case of stripping?
Spit rim
M5 x 0.8mm x 20mm Hex-Socket screw
Rotor
M5 x 0.8 x 15mm Button head Hex Socket screw
@@michaelpayton9475 you're the man
@@michaelpayton9475 did you mean 16mm? I don't think 15 mm exist
@@justinsarchive4111 I measured the length and got 15 but, 16 will work.
@@michaelpayton9475 m5x.08x8mm
Hey I ordered a vsett 10 will the scooter come with all the torque specs in the Manual ?
The factory does not provide a full list of torque specs. If we develop one we will update all our customers.
@@RevRides360 well this video gives me some of the important ones thank u great video
I'm having major issues with my vsett 10+, first the trigger throttle stopping working, then under warranty I got a new one, now, after installed only the front motor works, ive check the wiring connection, all looks good, spent a lot of money on this, its had more down time then running time, now the rear motor doesn't work , any ideas?
Depending where you you purchased from you should first message your supplier. This sounds like it may be a controller issue which I have not yet seen in the VSETT models.
@@RevRides360 I purchased and have spoke to urban machina Canada, they have to ask manufacture, but the scooter itself came from Rev
Thanks
Hi... Is it possible to apply sealant liquid inside the tire to avoid punctures? 🤔
Yes, it is. Remove the valve to do so. It doesn't AVOID punctures but, can heal small ones, once the sharp is removed. Follow the instructions on the product you purchase. REV Rides add Flatout to scooter tires before shipping.
Ima use permatex it should be good
Isn't it possible to disconnect the motor cable so you don't need to force the tire over the rim?
Thank you for reaching out to REV Rides, please follow up with us at Service@REVRides.com for further assistance. Cheers!
whats that spray youre using on tire and tube before install, and why?
The spray we used is soapy water to help the tire slide on the rim so that when you add air it self centers better. You don't want to use any kind or oil because once the tire is centered you don't want it to slip. There is also a product called "tire mount lube" made specifically for this but soapy water works too.
@@n8_EUC tnx
Hi can i use 255x80 tire on vsett10+?
Thanks for reaching out to us! You can find all tires we have available here on our website! Hope this helps! revrides.com/search?type=product&q=Scooter+Tires
Great video! I have a question for anybody with experience on this scooter, I'm 240lbs would you go with the bulkier vsett 11+ that's rated for higher rider weight? 330lbs compared to 285lbs
I have a Vsett 8 and weigh 230lbs (vids of the scooter on my channel). You can ride any of these scooters but what'll happen is that your range & maybe top speed decreases. On the Vsett 10+ and 11+, the decreases will likely be negligible if any.
One bolt is broken and im like thinking i need a welders help, the bolts used are just so soft
What size inner tube is that
Thanks for reaching out to REV Rides! This scooter takes 10" tubes! Cheers!
This makes the decision of a rougher ride on solid tires for me. What a nightmare! I'm just gonna deal with the slightly poorer suspension and grip.
Any developments? Did you buy a solid tyre ?
Exactly my thinking lol
I dread needing to change a tire on this bad boy. Geez
Is this guide also applicable to vsett 9+?
Yes, the VSETT 9+ will be a very similar process to replace the tube/tire.
I bored out one of the rotor screws and it was an absolute pain in the ass to get out. It took me like 4 months to figure out how to get it out but I finally removed it today. I used a flat head bit and a 22mm socket and banged it out like a chisel. Do not strip those heads
Dang sorry to hear that sounds rough Dont strip any screws always feel free to reach out any tie if you have questions
This video in its entirety is LITTER 🔥 than the ☀ Great job T‼️
Thanks man! The tire change is always a fun one to make. Lots of difficult camera angles here!
The fuck did you even just say?
why are there inner tubes inside of pneumatic tyres?
This rim design splits in the center for easier tire changes, which means it cannot hold air without an internal tube. Wheels designed for tubeless applications do not have anywhere for air to leak out. Hope that helps!
Im able to order this threw your company?
Yes, you can order tubes and tires for the VSETT 10+. Check out our parts listings on REVRides.com!
Man this looks like a hassle. I just ordered one and want to put a hybrid on the back. These are way too heavy for road tires.
Can everyone help me determine why my tire went flat last night. I was riding normal going down a residential street when all of a sudden my back tire kind of did a drift and that's how I found it was flat. Luckily I was not going 40 when it happened. Anyway I got back home checked the tire and there was no puncture marks or any nails or sharp objects so the problem had to be the tube. I squeezed some green tire slime into the tube and aired it up to find out it was oozing out everywhere but im still baffled as to how it happened. Will a hot motor do something like this because it was pretty warm? Or anyone have any ideas?
Thanks for reaching out! Yes, a hot motor combined with elevated surface temperatures can cause tubes to pop. Unfortunately the only solution is to replace the tube, which can be found here: revrides.com/collections/all-parts/products/zero-inner-tube Hope this helps!
@@alexbaran8845 is it possible to get tubeless tires for this model of scooter
@@daslaer6969 no unfortunately. It's a split rim
Tyler is sooooo cute!!!!
Can you show how to install a tubeless tire if there is one available. Nothing worse than getting a flat 5 miles from home.
Unfortunately you can not due to the split rim.
Is it possible to change entire wheel so that i can install solid tires?
What size tubes are they?
They are 10X2.125. Here is a link (revrides.com/products/zero-inner-tube?_pos=2&_sid=3c2975919&_ss=r)
@@RevRides360 awesome I appreciate that