I think it was Blackie Thomas who on his channel suggested turning the pot 90 degrees on the stand so they are perpendicular. It gives better air flow and keeps the handle from being heated up.
Another point, Bail handles. What I do with my Zebra billy cans is to cut them off with a Dremel then replace the bail with brake cable. Works just as well, but is flexible so it's easier to pack.
Just can't see that ti stove using wood. It will smoke like a bastard. Not promising w/ Esbit or alcohol either. I'm assuming an Esbit type alc. stove will fit under it??? The Pathfinder stove is the absolute best design out there w/the raised circles for heat to escape out the top and it doubles as a grill surface. Non-removable bail is poor design. Overall, great material....perhaps poor design for mixing their product w/everything else that is out there. Too bad....lost opportunity I feel. Looking fwd to your fire /alcohol/solid fuel testing. Thanks
First thing I did was heat up the stove base with my first twig fire and once I got my water boiling, and I dumped it in to make my coffee I picked up the stove base off the fire with a pair of pliers and took a pair of needle nose, pliers, and grabbed that lowered rim at the top of the stove and bent it up an eighth of an inch at all Four corners so that when I put it back on the fire, put the canteen cup back on top of it there’s now a little gap between the bottom of the canteen cup and the top of the stove which allows the hot gases and flame to come out, which gives it a much more effective burn and shortens boil time
If you cut a piece of SS mesh to sit on the top of the stove (Sized to fit in the recess that the cup/pot sits in) you could use any shape of cup safely on it.
Concerning the Pathfinder set, you remarked at 10:20, "I WISH I could get this in titanium". Reminds me of something my grand-dad always used to say, "If wishes were horses, beggars would ride". Somehow it always struck me as a funny observation. :-)
If you want put carbon felt on the handles of the cook pot so you don't have to burn yourself. I'm glad there is a bail handle. You can also fold the small handles up while cooking.
Loves this man. Really enjoy cooking in canteen cups. This is a great option. Love that bail handle. Dorian likes your pathfinder set. Can’t wait for the next one. Shane
Thanks buddy. I’ve been looking at these sets to go with my Nalgene Canteen but was never sure if they would fit. You’re right I think I would go with the two pot set rather then the bail handle. I have the round BV Ti pot set 1000/500 that I use with my Svea123r stove, great combo with that stove. I also have the Heavy Cover Canteen with a CenterLine Systems Mother carrier 👍. Have you checked out BV’s new canteen with the double pot set, looks pretty nice. Ti15158B-Canteen Cook Set
I think the best setup to combine the two cooksets (boundless voyage) is this from bottom to the top: pan, windscreen, pot and canteen. Test this if you like and let me know. Thanks.
Hi, if you put the Oasis in the Titanium Stove Kit Pot, the Mess Kit fits over the top of the Oasis? then you would have 3 containers and a bottle in one Setup
It's made in China but not that expensive if you try and not it directly from Alibaba. I bought a 750 ml pot with lid and Alcohol Stove. Shipping charges were higher.
Titanium is a great conductor and when removed from heat it will cool quickly. As for removing it from the heat, the top handle will remain cool so can remove it from the heat.
The cup is great . But , stove is terrible ? I use plastic canteens with the path finder cup and stove ...Get the one with holes drilled on top and it all will work and fit your regular canteen pouch..
But does the 1.5L boundless voyage mess kit pot (that comes with frypan/cup and lid nest down into the pot stand? They modeled the 1.5L pot off the German/swedish style WW2 mess kit, but didn’t provide a stove stand for a trangia burner using the pot stand as a windshield…major error imo, also they made it different dimensions to the original mess kit pots so you can’t use the original (or reproduction) alcohol stove stands with the 1.5 boundless pot! Even if the stove stand is a bit short in terms of height to fully surround the 1.5L pot, it could at least have a couple of holes drilled in the stand for a length of wire to go through and hold the 1.5L pot up off a trangia at the ideal height, at least a couple of inches could be down in the windshield and concentrate heat around the bottom sides of the pot rather than just the base of it?
Nah I checked, the width of the 1.5L pot is wider than the 800ml stove…it may be made to fit if the 800ml stove was cut down through the front and forced to flex open a bit then the 1.5L pot is pushed down into it? 🤔 it only needs to insert (nest) down into the stove stand so an alcohol burner has enough room to bloom up under the base of the pot and up around the bottom inch or two plus have the stand act as a wind shield too
Best kidney shaped mess kit is german. It include two or three part, in little bit larger volume. Foltable pot stand fit its inside. Pliers handle is good with it.
If draft/heat transfer becomes an issue, a trick I've used with the GI issue stove should work. Take a length of coat hanger wire and bend into a "C" shape that hooks into the vent holes at the top of the stove. Makes for a stable place for the cup to sit and allows better draft.
There are 2 two cup sets that Boundless Voyage sells. One is the standard peanut or kidney shaped. The other one is the more rectangular version. The canteen will fit on the more rectangular version, not the other one that is a traditional shape.
@@BarnYardOutdoors Oh sorry for the confusion. I Was referring to the boundless voyage canteen pot with bail in the video. You showed a number of combinations, the nesting combination I was curious would work would be the pathfinder canteen with the boundless voyage canteen pot with handle and the pathfinder canteen stove on the bottom. Thank you for your response.
I bought this set and an Oasis canteen based on your review. Thank you for an excellent and educational video! If you turn the cup sideways they ALL work with the BV stove . WHICH BTW- has MUCH larger feeding port than the PF stove easily making up for the lack of larger air ports! The Helikon E&E Pouch was my choice as well! Bill Doyle
I’m not sure, but is suspect it will not due to the different shape of the canteen. I should know for sure in a week or two, I have the Pathfinder Titanium canteen set on order which is the rebranded Boundless Voyage canteen set. Stay tuned to my channel, I will post a video when I get the new canteen.
![ได้เวลา! พาน้องแฝดฉีดวัคซีนครบ 1 เดือน🫣 [cc] แดนแพทตี้ SS2 | EP.52 |](http://i.ytimg.com/vi/IzeLtaXBLNE/mqdefault.jpg)
I think it was Blackie Thomas who on his channel suggested turning the pot 90 degrees on the stand so they are perpendicular. It gives better air flow and keeps the handle from being heated up.
I believe you’re right!
Another point, Bail handles. What I do with my Zebra billy cans is to cut them off with a Dremel then replace the bail with brake cable. Works just as well, but is flexible so it's easier to pack.
Just can't see that ti stove using wood. It will smoke like a bastard. Not promising w/ Esbit or alcohol either. I'm assuming an Esbit type alc. stove will fit under it??? The Pathfinder stove is the absolute best design out there w/the raised circles for heat to escape out the top and it doubles as a grill surface. Non-removable bail is poor design. Overall, great material....perhaps poor design for mixing their product w/everything else that is out there. Too bad....lost opportunity I feel. Looking fwd to your fire /alcohol/solid fuel testing. Thanks
An alcohol stove like the Trangia or Esbit will fit under it, I am hoping to get it out and do some testing this weekend. Thanks for the comment.
First thing I did was heat up the stove base with my first twig fire and once I got my water boiling, and I dumped it in to make my coffee I picked up the stove base off the fire with a pair of pliers and took a pair of needle nose, pliers, and grabbed that lowered rim at the top of the stove and bent it up an eighth of an inch at all Four corners so that when I put it back on the fire, put the canteen cup back on top of it there’s now a little gap between the bottom of the canteen cup and the top of the stove which allows the hot gases and flame to come out, which gives it a much more effective burn and shortens boil time
Will it fit in a 1qt canteen cover (old ALICE, or new MOLLE style) ???
Thank you in advance.
Keep up the great work !!!
Boundless voyage just came out with a titanium canteen $80 on Amazon and for $140 you can get the canteen and two cup set
If you cut a piece of SS mesh to sit on the top of the stove (Sized to fit in the recess that the cup/pot sits in) you could use any shape of cup safely on it.
Great review and comparison to each product.
Thanks 😊
Concerning the Pathfinder set, you remarked at 10:20, "I WISH I could get this in titanium". Reminds me of something my grand-dad always used to say, "If wishes were horses, beggars would ride". Somehow it always struck me as a funny observation. :-)
If you want put carbon felt on the handles of the cook pot so you don't have to burn yourself. I'm glad there is a bail handle. You can also fold the small handles up while cooking.
Awesome bit of kit. I sincerely appreciate your thorough comparisons and attempts at nesting various containers. Great job!
Thanks!
Loves this man. Really enjoy cooking in canteen cups. This is a great option. Love that bail handle. Dorian likes your pathfinder set. Can’t wait for the next one.
Shane
Thanks buddy. I’ve been looking at these sets to go with my Nalgene Canteen but was never sure if they would fit. You’re right I think I would go with the two pot set rather then the bail handle. I have the round BV Ti pot set 1000/500 that I use with my Svea123r stove, great combo with that stove. I also have the Heavy Cover Canteen with a CenterLine Systems Mother carrier 👍. Have you checked out BV’s new canteen with the double pot set, looks pretty nice. Ti15158B-Canteen Cook Set
I have looked at the new canteen set, but haven't pulled the trigger on it yet. Thanks for watching and the comment.
I think the best setup to combine the two cooksets (boundless voyage) is this from bottom to the top: pan, windscreen, pot and canteen. Test this if you like and let me know. Thanks.
Will this canteen set fit in a standard military canteen pouch? -Tony w/ Po' Boy Adventures
looks like a great bit of kit
Hi, if you put the Oasis in the Titanium Stove Kit Pot, the Mess Kit fits over the top of the Oasis? then you would have 3 containers and a bottle in one Setup
It's made in China but not that expensive if you try and not it directly from Alibaba. I bought a 750 ml pot with lid and Alcohol Stove. Shipping charges were higher.
Titanium is a great conductor and when removed from heat it will cool quickly. As for removing it from the heat, the top handle will remain cool so can remove it from the heat.
The cup is great . But , stove is terrible ? I use plastic canteens with the path finder cup and stove ...Get the one with holes drilled on top and it all will work and fit your regular canteen pouch..
its kinda lame that the BV setup doesn't have its' own matching canteen. if it did, i would snap one up.
But does the 1.5L boundless voyage mess kit pot (that comes with frypan/cup and lid nest down into the pot stand?
They modeled the 1.5L pot off the German/swedish style WW2 mess kit, but didn’t provide a stove stand for a trangia burner using the pot stand as a windshield…major error imo, also they made it different dimensions to the original mess kit pots so you can’t use the original (or reproduction) alcohol stove stands with the 1.5 boundless pot!
Even if the stove stand is a bit short in terms of height to fully surround the 1.5L pot, it could at least have a couple of holes drilled in the stand for a length of wire to go through and hold the 1.5L pot up off a trangia at the ideal height, at least a couple of inches could be down in the windshield and concentrate heat around the bottom sides of the pot rather than just the base of it?
Nah I checked, the width of the 1.5L pot is wider than the 800ml stove…it may be made to fit if the 800ml stove was cut down through the front and forced to flex open a bit then the 1.5L pot is pushed down into it? 🤔 it only needs to insert (nest) down into the stove stand so an alcohol burner has enough room to bloom up under the base of the pot and up around the bottom inch or two plus have the stand act as a wind shield too
Best kidney shaped mess kit is german. It include two or three part, in little bit larger volume. Foltable pot stand fit its inside. Pliers handle is good with it.
The stove doesn't seem to have enough air holes. Could drill some more but that might compromise the structure of such a flexible stove.
I agree. I am hoping to do some testing with the stove this weekend and will post a video update of the test. Thanks for the comment.
Price ? ?
$49.89 on Amazon.
Will the stove on this fit the Keith titanium canteen?
If draft/heat transfer becomes an issue, a trick I've used with the GI issue stove should work. Take a length of coat hanger wire and bend into a
"C" shape that hooks into the vent holes at the top of the stove. Makes for a stable place for the cup to sit and allows better draft.
Thanks for the idea. I will pass that on to the person I gave this too. I know he is working on ways to make it perform better.
@@BarnYardOutdoors If coat hanger wire doesn't do the trick try welding rod in a larger diameter...
i wonder how the boundless voyage canteen fits the cup and the mess kit?
The shape of the canteen is different from most other canteens so it will not fit in this stove set.
BarnYard Outdoors sot he boundless voyage canteen won’t fit in the boundless voyage cup set or canteen cup set ?????
There are 2 two cup sets that Boundless Voyage sells. One is the standard peanut or kidney shaped. The other one is the more rectangular version. The canteen will fit on the more rectangular version, not the other one that is a traditional shape.
BarnYard Outdoors I am hoping the cup with the bail that comes with the stove fits because that is what i ordered
Let me know in this thread if the one you ordered works for your setup.
Thanks for the video. Was hoping to see if you know if the pathfinder stove will fit on the boundless voyage pot with bail handle?
Unfortunately I do not have their pot with bail handle. But I want one. If I ever get one I will do a review of it on my channel.
@@BarnYardOutdoors Oh sorry for the confusion. I Was referring to the boundless voyage canteen pot with bail in the video. You showed a number of combinations, the nesting combination I was curious would work would be the pathfinder canteen with the boundless voyage canteen pot with handle and the pathfinder canteen stove on the bottom. Thank you for your response.
Whatever dude!
I bought this set and an Oasis canteen based on your review. Thank you for an excellent and educational video! If you turn the cup sideways they ALL work with the BV stove . WHICH BTW- has MUCH larger feeding port than the PF stove easily making up for the lack of larger air ports! The Helikon E&E Pouch was my choice as well! Bill Doyle
Most Excellent KiT !! Sadly way outa my meager DAV $$$ ! Glad 4 uall that can git one NjoY !!
Cool kit. I'll be sticking with My pathfinder kit.
Morning, looks like a good setup, small an easy too pack. Thanks for sharing buddy. An Happy New year to you an yours...
Pathfinder is better design but its pricey and hard to find to order not from thier website :-(
Pretty nice set.
Thanks for the video brother
Does the boundless voyage Ti canteen fit in this kit?
I’m not sure, but is suspect it will not due to the different shape of the canteen. I should know for sure in a week or two, I have the Pathfinder Titanium canteen set on order which is the rebranded Boundless Voyage canteen set. Stay tuned to my channel, I will post a video when I get the new canteen.
Surprised it doesn't come with a canteen.
Looks like a nice cook set.