Fixing an iPhone X that wont turn on due to a VDD_MAIN short
ฝัง
- เผยแพร่เมื่อ 17 มี.ค. 2019
- If you like this, please consider contributing:
▶ Tip via PayPal: paypal.me/helpjason
▶ Become a Patron: / ststelecom
▶ Tip via Bitcoin: 1D8zAG9XMrr2mwGowpd9zQDMHNjm3PsQkG
Need Repair or Recovery? www.ststele.com/mail-in
Here is my thermal camera:
amzn.to/2QONjuq
iPhone X PCB holder I use:
www.unionrepair.com/mechanic-...
Note: This link says it's for the 220v model.
Here are my tools:
Soldering:
New hot air station: amzn.to/2GNsTOK
Old hot air station: amzn.to/2q5t1Ot
Soldering Station #1: amzn.to/2pZyfLy
Soldering Station #2: amzn.to/2CrDjzs
Micro-Pencil Iron: amzn.to/2pZnYim
Micro-Pencil Tip: amzn.to/2pVDjjW
Curved Tip: amzn.to/2RWl0rJ
Long Bent Tip: amzn.to/2pPwqiK
Bevel Tip: amzn.to/2nFk105
Mini Hot Tweezers: amzn.to/2pZmogy
Flux: amzn.to/2pXOGrL
Solder Paste: amzn.to/2pXPWuZ
Microscope Stuff:
Microscope: amzn.to/2pZLjk0
Ring light: amzn.to/2CPz4il
Camera: amzn.to/2Ckxiot
Electrical:
DC Power Supply: amzn.to/2NGMhuV
Multimeter: amzn.to/2CNdGdu
USB Current Meter: amzn.to/2yvd8VY
Thermal Camera: amzn.to/2QONjuq
Software for Board View & Schematics:
Easy Draw: bit.ly/2vqTT0C
FlexBV: pldaniels.com/flexbv/
ZXW Tool: amzn.to/2NMw5s6
Phoneboard: phoneboard.co/
Other Tools:
Strait Tweezers: bit.ly/2pN3okz
Curved Tweezers: bit.ly/2E1Boik
Underfill Cleaner 1: bit.ly/2GhCL2n
Underfill Cleaner 2: bit.ly/2IYZVZ4
PCB Holder: bit.ly/2GDdA9V
Recording Gear:
Microscope Camera: amzn.to/2Ckxiot
Camera on my hands: amzn.to/2SrOxcu
Main Camera: amzn.to/2LJ1tII
Headset: amzn.to/2nIWWeI
STS Telecom is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
~
~
~
#iphone #repair #tech - วิทยาศาสตร์และเทคโนโลยี
![[ไฮไลต์] แบดมินตันชาย SHI Yu Qi (จีน) vs วิว กุลวุฒิ (ไทย) รอบ 8 คน | โอลิมปิก 2024](http://i.ytimg.com/vi/f7z7taforOM/mqdefault.jpg)
I think the best word one can use to Jeson “Most humble n selfless person”
You just make people never to pause a video because of how you speak, smile etc. keep up the good work man
Love watching your videos. You do such great work. Thank you for all your help and lessons!
6 egg
wooooohhhhh i almost miss this but im here watching again in again i think it is almost a hundred videos....the great jayson
Love a quickie 🤣👌
Keep up the good work my friend.
hahaha the clamp :D great video as usual thanks Jason ! !
Hey Jason. Great video bro.
Ps. I miss those long videos but is always fun and learning from you. Thank you 😊
AGREE
@@itisyewolf I agree too
Jason great work! I think you should think about buying a tweezers iron for those caps to avoid hot air I those areas ... Keep up that awesome work👌
Best Regards!
Nice repair Jason job well done 👍
I can't test this theory but if you preheat the boards with air or have some air over the larger area when initially on hot plate it might help prevent warping. With that end of the board being small I think it will be absorbing heat faster and expanding before the larger part hence the bend. That or maybe a cover to help more uniform distribution of heat over the top side?
Thanks too much for this technology and new tools you have made
And tech us
Especially thermocamera
Thanks
Please keep on
The man, the legend himself 😀 never get bored of you but not going to lie bored of apple being sneaky love from 🇬🇧
Hello my favorite, thanks for uploading!
Regard from Holland!👍👋
5:39 what a great quote
hello, thanks for the video. a question: haven't you reballed to weld the two parts of the motherboard?
Grittings from Spain -Valencia i like your video ! i give you big Like !
Nice work. Start separating the sandwich on another spot with more thermal mass. The hole next to SIMtray for example. You will end up with a top board that isn't bent that much an it will pull itself down when soldering back together.😉
You are the best ever
Best regards from Baghdad
Jason: grate and usefull video.
Hey Jason. I like your channel very much) I want to open my workshop)) Please tell me which crm do you use?
Thank you bro.
can you please do a video on reballing the middle layer pcb? i just want to see it under microscope it would look nice
You are a good master
A question,if you replace a iphone x earspeaker there is a big change that you will lose face id?Nice video btw :)
Thank you frend
Listening to your voice reminds me of a trip to Disneyworld Florida more specifically the bus from the car parks - sorry I didn't mean to insult you they were good memories! Love watching your videos as they are both entertaining and informative - not that I am about to disassemble my $1k iPhone!
Great job
thank you
Thanks
King Of Apples ❤️❤️❤️😘 Love You Bro From India
Nice bro
great sir
Sir
I am also technician lot of iphones rectify fault from your video
Thanx
I need to know about what software to use microscope camera and small web camera to you recording and in the microscope eye view and cam view how to correct same clarity.
Thanx
Raazi gsm
Apart from freeze spray, what other type of spray or alcohol can I use went finding a VCC/VDD_MAIN short, freeze spray is not available in my country. And where can I get the software for Board View and Schematics
Your amazing
very very very good
Hi,i wanna ask you why my iphone 7 does not boot or charge with the original main camera,after i change it the phone booted and main camera works perfectly
hi my name is howard thank you for video i ask something what kind flux use. when you take out ic chip and put it back ic some liquid use....... thank you.
How much for that kind of repair?
Hello Jason, please I need your help, I have an iPhone 6 with no service problem or sometimes it keep saying searching.
Hi jason. I was replacing home button on an iphone 6 and managed to f*cking short the pins with the backplate ( my fault not dcing the battery first) . Now i get no image and while charging the current fluctuates from .1A to .8A , any idea ? Thank you and keep up the work :)
How long do you need to separate the two layers
Brother , am a repair technician from dubai uae , which brand thermal camera u r using? Suggest me?
Can you try guess which part should be replaced when the apple logo booting loop of iPhone X? I thought it was a software issue but it wasn't.
the vcc main and vdd main its the same line?
Nice
What is the model of your power supply
good
how do you find it was the only vdd short? not vcc or something else? any tech reply here?
Wouldn't you check both halves for shorts in case there was one on each half?
What use microscope temperature view' plz information
Hey Jason, love your videos! I do games console repairs here in the UK, and would love to start a channel similar to yours. So wondering if you can recommend a good camera setup?
Check video description.
@@sergeyk6886 I'm an idiot lol thanks
hi how much for a charging ic for xs
My man! :D
I've got a Samsung galaxy a3 that will not power on any advice on how too fix it
So I have an issue with my iPhone X when during calls my mic stops working, works with 3rd party call apps but not the phone app, any suggestions
Hey Jason.
My iPhone X stopped working all of a sudden. No warning. The phone was fine, but the next time I checked on it, then it was warm and black screen. It does not help to do a hard reset.
Is the phone seriously done for? I payed $1400 here in Denmark when it came out... Hope to hear from you. I am very annoyed with this issue. :(
HELL YEAH!!!!
Buy a macro lens for Flir One Pro, find on Ebay
I have one iphone x shorted on vdd main
After i fix it's slow charging
I replaced u2 ic ,batery,charging strip
Not fixed the slow charging
Any other sollution
How do you not have suicidal thoughts, daily. Respect for the work bro.
Thank You APPLE, for have using 2 boards in one phone assembly. 😫😫😫. Furthermore thank you for upload. 👍👍👍
There is a tehnik whit miliohmmeter, place of the lowest impedance is the coulprit
hi i just yesterday plug the iphone x for dc power suply before its worked.. but after i pluged now its dead.. can you give me solution please?
It does not deteriorate after being repaired
Hey Jason,
didn‘t you replace the bad cap? Did you just left the board w/o the cap???
I usually replace them but not in this case. It's too minuscule to risk soldering next to the PMIC. It wont make any detectable difference in how the phone runs.
STS Telecom Alright, that’s true. That woould be dangerous...
Thanks for your reply, Jason 😊
Keep going with your great videos! You‘re a really cool guy. 😊🙏
Greetings from Germany
Tolga
Deair sir your relly relly great great job your video se that's long time ago i wanna meet yu tich mi i phone repair my just little cell phone repair shop good bless yu sir
HI CAN WE SWAP IPHONE X A11 PROCESSOR, NAND , AND BASEBAND CHIP OF A BROKEN MOTHERBOARD TO I CLOUD LOCK MOTHERBOARD
What is the thermal camera software that you used on your phone? please
I want to know the camera but he doesn't respond to message
Super super bro.m
Sooo could you tell me how the heck everything works without that cap?
From what I understand if the phone is in for just data recovery the repair shops don't care if something non- essential for data recovery is broken because the phone wont be used any longer. If the board is in for repair and will be used by the customer then they will take a look and see if what is broken with the shorted cap is something the customer really needs and fix it if it is essential. Sometimes fixing caps right next to the main cpu are problematic since the cpu is heat sensitive and you can kill the board pretty easly.
Bro please help me in repairing iphone x i try everything i can... but the proble is when plugged into charging it shows 0% remainig
Yep plastic clamps don't like heat, you could wrap the feet in aluminium kitchen foil, at least the melted plastic won't get on the pcb lol.
I wish I would have been recording when I first put the clamp on. I knew it was melting but I didn’t count on it sticking like that.
Well you have to experement to find good methods.
Have a hunt for a clamp with say teflon feet or better, they must exist :-)
@@zx8401ztv man this mechanic preheaters is sucks i see mechanic failing with their new product line
Bro my iPhone X keep restarting during working..how I can solve it
Can you help me repair my iPhone 5s
hey boss i need. help my iphone x. dont turn on anymore i trying to change. the. screen now. my iphone. dont work can you help me please.
Can I send my Iphone XS to you for repair? I saw a spark while putting back together :-D
Also the face ID doesn't working.... A "patch-up"on the able would be fine if it saves the Face ID feature :-)
Had some water damage, rear camera no has a water spot, but can live with that....
So when they gonna do the Triple Whopper? That would be a nightmare to separate.
I find this somewhat terrifying. 😮 I had not thought of that!
hey man can i send you my x iphone got wet not turning on thanks.
But if the short is on the other half ?
Put amps on vcc main cap like he did,an find warm spot
I wonder if the iPhone Xr/xS/Xmax has the same type of main board??
Rick Howe Jr They have
Jason, do they? You'd definitely be the one who can ultimately answer this question! ;) LoL.
Again, thank you for doing awesome repair work and the great videos you put out regularly! Your work has open my eyes wider on what it requires to do quality repairs and trouble shooting. I've learned more watching all your videos than I have reading/watching other repair/trouble shooting videos on iPhones! Keep up the good work, hopefully one day I'll be as good as you are! ☝️😎👍
Apple: I think our iPhones are too repairable, let's sandwich the board so no one can properly separate it and fix anything. Also let's make face id brake as soon as you change the display.
Apple is trying to making it harder for independent repair shops to fix phones. Apple is trying to force their customers to deal with them only for the fix (or replacement).
If you break FaceID during a screen replacement, that's all on you.
Yea, if they didn't think it would make the phone waterproof, they would pot the entire thing.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
Why not use the thermal camera before you separate the boards in case the fault is on an outer side or did you do that already but not show it in the video?
Cause all vcc main components are inside both boards
@@froydenzi However if you watch Jasons video some of the components associated with VCC main were on the top side of the board.
There are some under the shield for acorn. I wind up floating the PCB halves to remove that shield anyway. Perhaps I could clamp it first? I did peak at it with the thermal cam before taking it apart but could not tell where the hot spot was. The odds are very low that it would be anywhere other than between the 2 halves.
@@ststele Thanks for your reply. I wasn't sure if the thermal cam could "see" clearly enough to identify if the short was inside/between the boards.
I think my Android has this issue, no power at all, when I try to power it on, the phone gets hot to the touch
May Almighty God bless you
Yay! iPhone X video!
I’m gonna post some longer ones soon :)
...hopefully soon. Gotta catch up!
I Build my work bench inspired from yours btw :)
in one of those longer videos, i would love to see a bad lift and how to re-ball and clamp a warped board... is the drag an iron and let surface tension method you do minimal enough? Or when clamped, will that bridge pads?
@@joesipaq Take a look at one of Jason's prior videos where he showed that th-cam.com/video/DBhzDSwU3uA/w-d-xo.html
🎉. I just got a short thesame spot
heya data recovery you said well 1st there has to be data on it lol
can u help me fix my phone?
zxw ou phone board?
I wonder if they blamed you for not having data 🧐
data can be recovered from formated i phon
Jason it is not "our balls" COME ON XD
Not hot after repair
❤
hello sir
How removing the short and not replacing the short actually fixed it?
In this case it was a cap that was shorted together inside. Removing it allows the phone to boot and since it's such a tiny cap on a network with dozens of other caps, it wont ever be noticed. Sort of like having a couple dozen kidneys.. hehe :D
@@ststele I know it could be for power sharing etc, but surely a better value unit would have been a better fit for the customer and their rep. Do you think Apple are getting worse for cost cutting or just lax?
Its just a filtering capacitor
Hello sir
IPhone X camera Face ID back camera voice recording not working please send solution????????!!📱📱📱📱📱📱📱📱📱📱📱📱
I love to learn…. Am from nigeria ….
when you say the vcc main shows .7 Ohms, did you know it had a short because the reading should be 0.0? so any reading that isnt 0.0 means a short?
A perfect dead short would be 0 ohms. Vdd main should be in the thousands of ohms for a normal reading. At 0.7 ohms, too much power flows. This short was even lower since some of that 0.7 ohm resistance was coming from my probes. Hope this helps! Sorry for the late response. 🙂
My mama told me to never go inside j5700's with strangers.😨
But this j5700 has candy 🍭 and toys 🧸