Iphone X , dead, shorted, can we fix it without touching the faulty component?
ฝัง
- เผยแพร่เมื่อ 31 ส.ค. 2020
- UK Ebay store: www.ebay.co.uk...
US Ebay store: www.ebay.com/u...
WebSite: sorinelectroni...
Patreon support: / electronicsrepairschool
TH-cam Members: / @electronicsrepairschool
Forum: forum.sorinele...
Discord: www.sorinelect...
My tools: www.amazon.co....
PayPal me: www.paypal.com...
WE NEED "MORE AMPS" T-SHIRT!!!
It's over 100 degrees!
The wires are getting Hot.
We need MORE amps!
You are lucky!! Nea’ Sorin cred aveți un noroc foarte mare. Tot respectul.
Watching Sorin repairing phones is like a rollercoaster drive. u cant stay cool, u cant go away, u have to stay and wait, till the end ;)
A new superhero - Dodgyman =))) But above that i always learn something new. Thank you! =)
I laugh so hard when you said "this is mother of dodginess" haha
8oòò8oo
This happened with an ASUS ZenFone 2 I fixed. It had a full short in the 1.8V rail of the power supply which prevented any power going in to the eMMC chip and hence the phone was dead. I applied 2 Volts to the shorted rail, it drew 1.2A for a few seconds and before I even got to know where the heat was coming from, the short was gone. I immediately removed the power supply and powered on the phone. Everything was fine except WiFi/Bluetooth/FM. I replaced the WiFi module later on (BCM4339XKUBG) and the board still works to this day perfectly.
7:10 - Sorin: “I don’t know; but, I can find out!” I _love_ it! He leaves “no board unturned” in this shop!
Wowwwwwww, am so astonished right now.
Sir, I so much salute your your in-depth of experience and our styles of electronic repairs.
It seems to me that you never ran out of options.
You are indeed a source of inspiration to all the young phone and laptop repairmen out there .
I will be so glad if you can do a video on HOW TO DISABLE SHORT PROTECTION ON POWER SUPPLY.
Thanks.......Your No1 fan from NIGERIA
YES! Dr. Dodgy is my new hero! He rigged up his own "Short-Killer." Only someone with this high level of understanding can successfully walk on the edge of danger without going over. I love it.
As always thanks for hreat fun! I think this capacitor didnt bow, but when you put the board to reverse position and applyied current, solders get liquid and capacitor falled down ;)
Actually this is very possible
@@electronicsrepairschool usb meter name and link pls
yah its can be
@@fahadahmed5294 it is generic one, just search on eBay or Aliexpress
But if it's there around, won't it short something else some time? If this can happen, hope it didn't fall then xD (though seems more probable than having exploded like that without continuous current)
You make a shortkiller homemade :D it's correct the VCC_MAIN is a BIG track and it's easy to fix if something goes wrong.. but u must buy the tool to separate the sandwich like the Sunshine SS-T12A- Main unit + T12A-X3 it's a good deal.. or u can buy the tool to put on your hotair (I do not recommend it is very uncomfortable) and yes.. to test the sandwich u MUST need isocket 3 in 1 or something similar (MEGAIDEA for example) and than u must assemble it with a BGA Reballing Stencil and yep it's no finish yet.. a good solder paste 148°C temperature (mechanic xp5) it's a good deal..
RAW and BRUTAL- OLD SKOOL RULES
I used your method today and it worked out well except for having to separate the 2 halves of the logic board. For some reason I wasn't getting enough current through unless it was on a capacitor near the blown cap but with the boards together it just wasn't cutting it. These boards are relatively easy to separate and put back together again I guarantee you can do it. Thanks sorin you are an extremely helpful person with good intentions.
Utterly brilliant! That was pretty much the reverse of Apollo 13 - They needed less amps to make it work - Sorin wanted more amps! Yes its off the scale of dodgyness but that is what we want, well some of us!
Sorin, you are simply a magician
Dodginess gets the job done EVERYTIME... great work !
This great fix was a brutal, but very effective manner. Thanks a lot for sharing.👍
Wow man that is incane 10amps on a phone board and still working great job sorin 💙💙💙💙
Three salute to master.... Never thought of the trick. Blowing a capacitor idea is certainly crazy.... It only master can do ... Bravo...Hats of again.
There we go My trainer, My Master your're always the best for me
Who disliked this? wow! ...its Genious..! Why would anyone dislike? Nuts!
simple , effective, thanks to experience over board failures , caps , mostly tantalum, go short and explode when in high current circuits ( oscilloscopes ) but in phones not enough power to explode , luckily many caps are not needed in the finished products , in cause development of each board is by differnet labs , and so redundant filtering occurs , and you have shown this !!bravo Sorin
Wow...very nice job sir, that's why I always watch your videos.
I cant believe what my eyes just saw!!!!!ahahhahahah 😆😆😆 thats really sick...pump 10A on a top notch piece of human tecnology, and he fixed it ahahhahaha i cant still believe what he did...well done Master Sorin...you are really skilled
22:41
Sorin: "God! I need more Amps."
God: "Use gasoline and set it on fire."
Thanks for tips and tricks you are telling us each time , this was crazy :) but as you said it worked
I can’t believe what have you done. Anyway the melting point of the solder between the 2 boards is 132°. It’s a low temperature kind one.
And as Louis Rossmann says '' i hope you learnt something'' and I hope he watches
" and as always! We need more AMPS!" -Sorin's version
Hello Mr.Sorin,
Thank you for that! My capacitor its blown up at 7A.
My Iphone turns on again 🙂
Hi, Sorin. In my opinion, heating the board up to separate the sandwich will not nelt down every solder ball along. I think the solder which holds the boards together has a lower melting point than the one holding other components.
the best video so far
Absolutely incredible! You are a brave man!
Hello Mr.Sorin , always interesting and enjoyable videos , when you placed 10 amps on that board i tought " this will blow up or never work again" , always seeing great experiments on your videos , keep up the good work . Great video !!! :D
Fantastic video as always can you or someone else please tell me what glue to use to glue the screen back on
Welcome back Commander!
A splendid prove of talent! Proud of you Sorin !!!
Only Sorin can make dodgy professional lol. Great job. That is true knowledge at work.
Everyday you learn something new. Great work, thank you.
yeh yeh!!!!!! my professor .there a saying that says work hard such lucky is force to support u.on this case knowledge, experience, hardwork and good heart has forced lucky to support u.
Perfect video I am watching with love
I was really hoping this match : dead Iphone X VS Master Sorin, now i a m glad to see this and Sorin badass as always 🤣
That is great you must off been so lucky... yes that ceramic capacitor didn't stand a chance. I have done something similar before...
Sos el mejor, grande Maestro!!!!!!!!.
Tesla: "Hey Sorin. We have an issue with one of our Falcon 9 rockets, we think it's a blown capacitor. If we bring it to your shop, can you give us an estimate please?"
1 week later.
Sorin: "Ok folks, here we have the motherboard of one of the Falcon 9 rockets which may have a blown capacitor. We will try to enhance it by..........".
Sorin to Tesla: "Okay, it's done. I did some frankenstein stuff to it. It's working better now. You didn't need half of what you have. It made a good video. When you use it, just watch that re-entry speed. It is more efficient but.....just watch the speed, yes?"
😂😂😂😂
where is my short? oh, i found my short. i found your short aswell.
Sorin is the Mr. Magoo of repairs. 😂
U r so genius .... And no body can defeat you ❤️❤️❤️👍👍👍💪💪💪❤️❤️❤️
At this point i think Louis can just kiss your feet.
Praise mother of dodginess, people.
Well like my dad used to say.."I would rather be lucky than good looking"! Well done king of the dodge! this is what you can do when you truly understand the field you are in.. only pro's can be dodgy and make it work.. Thanks master! carry on!
I found that resistance of the wires plays important part in this process. Before you apply the 9.8 amps in the phone you touched together the Power supply which we can see in the upper left corner and voltage went up to 1.something volts, nearly the same as if you were connecting that to the phone. So if you have wires with closer to zero resistance more amps should go through the short and less wires will be melted. :)
Cheers.
P. S: I made myself some wires for power supply by stripping a 3 prong power supply cable (for PC or monitor) and soldering them on both sides - where they connect to the psu and the aligator clips. Hope that helps anyone. Thanks.
I learned the phone repair from you, thank you. good you are
You are very lucky
Sorin :)
You need a supercap, like the ones they use for building capacitor-based car battery replacements and some short and thick wires. Or some e-cigarette-grade Li-ion 18650 cells, paralleled with some short thick wires. Also the wires you have for applying that current to the board are below standard. An upgrade can be cheap: just parallel 2 or 3 wires like they use in a house electrical installation. Usually that is 2.5mm. They'll carry 20amps without heating up too much. Each.
For a guy that likes to play with amps, you have surprisingly few amps available to play with: just 4.8 and 9.8 if you borrow another lab power supply.
But when trying to fix an iPhone board, it is better to be able to gradually increase the amps. If you would connect a charged supercap to that thing, it will probably blow up.
BTW, you're brave. First, you douse that hot board with petrol and right after that you connect a current source to it. It might spark and set the board on fire. That would make a nice video: Sorin fixes a board by setting it on fire.
You definitely need to get some better wires. You cannot set your voltage higher because it will damage the electronics when the short clears but you need a higher voltage to compensate for the voltage drop in your thin wires. So, get better wires.
It's crazy, man. Great great great job! Peak dodgy'ness of lord. What a man! Keep it up.
Keep on ... I like watching your videos..
Sorin check out the Mechanic iX5 Max 6-in-1 preheating platform. It works with iPhone X, XS, XS Max, 11, 11 Pro and 11 Pro Max. You'll also need Jigs like the iSocket with some tester cables, and stencil/s for reballing.
Hey king Electronics repair school
25:46 - Sorin: “Scotty, we need more power.”
P/S: “I’m giving ‘er all she’s got, Cap’n!”
First you were applying current on connector but the short was after mosfit, i think thats was the reason that capacitor did not blow up. but when you applied the current directly into the circuit after the mosfit the capacitor blows up. Maybe? 🤔🤔
The amp master, amps hero, here comes the amps😃 make a T-shirt sorin😜
A device is already there to solve this types of problems, popularly known as Shortkiller.🔥
Great video as always
Another wonderful video! What brand probes do you use when diagnosing phones? I'm looking for a suitable pair. Thanks!
surely insanely dodgy but it work than ok, great video.has always learning something new
They sell special heaters to aide in separating the pcb
Does that mean DC power amp can work just like a short killer when combined together?
😍😍😍 love tha amps 🔥
At least we know the tracks can handle 9.8 Amps lol... Using a shorted cap as a fuse is saved me several headaches that's for sure
Can you please explain what hack did he did at 23:00 ? I'm trying to evaluate if I buy a 5A or 10A power supply for this kind of... "repair" :)
fascinating...never heard about this technique
If you do other iphones you might want a Tristar chip tester which controls USB and charging functions.
Hello, I haven't been here for some time, and wow, a scary movie! Do not try this at home! ;) It was so fun to watch this. As always. Thank you Sorin.
Amazing, 10A !!! I was waiting for the smoke then the fire ... but no, it works
You are fucking lucky or you are God
What is the power supply model you using plz with 10Amps and what is the multimeter you use???? does anyone know. i hope sorin you could put a list of tools you use in you channel.
i never saw Sorin used so much imagination :D
what kind of power supply are you using that can produce 10 Amps
Two power supplies.
@@nilomyki in parallel
you can also open that and repair. with hot air
Sorin thanks for the video once again I came across a device called short killer
Do you know about that ?
nice!
Hello friend, lots of health, congratulations on sharing these good videos. lol on that phone the breakdown would be really condenser in short ... hug the tuga in Portugal. Good channel :)
SORIN - the ShOrt destroyer
There were never so much Amps used on this Chanel, We have a new record! ;)
thank you for share
Hello sir, can u do video's main parts of PCB identification, schematic reading pls pls am bagging u
Usb meter name pls and link
Would love to here wat louise roseman would say here
Thanks thanks ....super super...
King.
Very good
''Lets give it 5 amps up the ars'' ha ha ha ....''I can feel where it exploded into flames!! But just a few more amps.....few more....lol
Thats sick! 😃
Lets get more AMPS!
I really enjoyed this video sorin one of your best! The definition of unorthodox way hahaha
Wow !!!
There are devices in AliExpress that passes high current to blow up shorts.
Shortkiller, it is called
you are crazy and your work is magic :) :) :)
Crazy but entertaining non the less. WOW, who'd ever think this would be the outcome.🤪
As electro competent master of amp useful ...technique....the capacitor fail..the short as fail.
I am astonished and in awe. And the large question, how many more fab fail are
build as to model. The iphone x, with this fault...expected to design. As repair, this board is needed to useful repair at future job....after job..constant to model. As failed part, component.
A clear...interesting lesson....to the function of common rail. how to check V. plus...fundamental. with the screen open. M.
Wow this is awesome 👍
Great job as usual ): but why not just remove that capacitor which was faulty? Was id difficult to find that cap that's why?
capacitor cannot be find without risk of damaging other component
Jessa and Louis need schematics, Sorin just needs more AMPS!