For more course information , please check bit.ly/3dU4X8S Q&A with REWA Team, please like and stay tuned to our FaceBook page: REWA Technology ( bit.ly/3bEie3k )
Thank you so much @rewatechnology ... Kindly build a platform or a application where we can clear our doubts and ask questions.. 🙏🙏 thanks for your brilliant teaching methods..
@@samiabe8686 the values are in the circuit diagram. you can download the free Rewa eçschema called: REFOX. In this software, they take care to put the circuit diagrams and the values
Hello Sir i have iphone xs front camera not working.... replace camera and check pin in diode mode all ok... but still front camera not working.... can u plz help 😢😢🙏
I didn't know for an Intel motherboard it wouldn't boot up if its separated. Boot current only goes up to 60mA. Is this because the EEPROM is on the signal board?
Hi David, while there is nothing to do with EEPROM. The Intel motherboard once sperated, it wouldn't boot up only with logic board, n boot current remains 60mA.
Can someone explain: He found C2649 faulty and then he ticked it off? Am I missing something here? Did he run boot test before soldering a new c2649. I just saw he took/tick it off and then he was done ✅
Starting at 10:47, after removing the c2649, he took care to measure the diode value from empty pads, so he found that the value was normal. Which means that this problematic comes from c2649. So he replaced the c2649 and then tested
Evangéliste Jean Paul MUTOMBO NSAPU thanks for the clarification. I got confused because he didn’t show the process of putting a new c2649, but I should of assumed he did. Thanks! :)
Welcome to visit our official website ( academy.rewa.tech ) for experiencing free case courses. Or feel free to contact us at academy@rewatechnology.com for any questions. Thanks for your interest :)
For more course information , please check bit.ly/3dU4X8S
Q&A with REWA Team, please like and stay tuned to our FaceBook page: REWA Technology ( bit.ly/3bEie3k )
This is very cool!) Thx! Please, check camera and charge line on next content
where and how do you ask for or buy this little capacitors for cell phones?
How can someone be so professional hats off to you guys ❤
My love for this video is extremely high, I’ve been rewatching every since I found this video, it’s my favorite video ❤
When someone knows how to do something they explain very easy. Thanks for the video. It was very instructive.
Thank you so much @rewatechnology ... Kindly build a platform or a application where we can clear our doubts and ask questions.. 🙏🙏 thanks for your brilliant teaching methods..
Now thats a real fix , excellent work
Thanks you so much this platform a really helpful for any mobile technician❤
Vielen Dank gute Erklärung der
THANK YOU VERY MUCH FOR YOUR VIDEO AND IT"S SO KIND OF YOU TO ADD ARABIC LANGUAGE WONDERFUL EFFORT THANKS.
Many thanks for this fantastic online course!
Superb 👏🏻👏🏻👏🏻👏🏻👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽
obrigado rewa por compartilhar informações tão importantes.
Thank you so much God bless you
very nice explained good job sir
Good work R
Thanks you so much I really appreciate
Thank you always the best and thank you for your translation into Arabic
Rewa iz awsom.....🌷🌷
Greetings, what is the pin you use to turn on the phone with the clamp?
Good job 👍🏻 rewa
Fentastic rewa
Красавчики!👍
شكراً على الترجمة بالعربية
نأمل أن تكون الترجمة في تطور كي تكون مطابقة للشرح
thank you very much !!!
100%professional...
im wating. thanks rewa
Awesome video, thank you !!!
Can u upgrade the memory or iPhone X
we are waiting
thank you super video
Thank you very much for 👍👍👍
Thank you for share knowledge
You are just on another level, my god thank you so much!!
thanks a lot , amazing video
waw arabic subtitle it's amazing thanks Rewa
Thanks for watching and the feedback on our video :)
please show us another video on the case of cut line or i2c problem
i have managed intel board testing without fixture or without signal board
Thanks very much . U have explained it really nicely. Where can we get the board diagram ?
is 3.6v safe while usinig rosin testing method--- because u applied voltage around processor and processor only needs around 1.5v voltage helpp
Iam waiting from india
Sir in iphone 6s plus lower charging flex cable has cellular network antena or its on upper side plzz tell me
thanks you !
Waiting...👏🙌
Thanks sir
tak nyimak, sopo reti enek wong jowo seng delok pidio iki😊
Can we insert A13 chip in iphone 8 plus
Sir do have online course
Good good good
Rosin smoke is one method what are other methods not including alcohol or freeze spray????
Other than that, you can use thermal imager, while rosin smoke will be one of the most cost-effective and efficient way base on experience.
REWA Technology thanks I will soon try this method of rosin
Mantapwbang
What is the best way to tell whether or not a current reading is normal?
Do I need to infer it from the circuit diagram, or do I just compare it to values of a working device? Or something else?
@@samiabe8686 the values are in the circuit diagram. you can download the free Rewa eçschema called: REFOX.
In this software, they take care to put the circuit diagrams and the values
Evangéliste Jean Paul MUTOMBO NSAPU Thank you so much!
Hello Sir i have iphone xs front camera not working.... replace camera and check pin in diode mode all ok... but still front camera not working.... can u plz help 😢😢🙏
Waiting
hi can you please schow a video of diagnosing iPhone 7 error -1
so i can fix it
thanka in advance
I didn't know for an Intel motherboard it wouldn't boot up if its separated. Boot current only goes up to 60mA. Is this because the EEPROM is on the signal board?
Hi David, while there is nothing to do with EEPROM. The Intel motherboard once sperated, it wouldn't boot up only with logic board, n boot current remains 60mA.
👌
👏👏👏👏👏👏👏 pena que em poucos vídeos tem legendas em português
Why you didn't inject voltage in this capacitor 10:04 why you flip the logic board
why not made an Imesa tutorial for touch id of iphone 7
Hi, yes, we did tutorial for touch ID of iPhone 7, please check bit.ly/3dU4X8S
Can someone explain: He found C2649 faulty and then he ticked it off? Am I missing something here? Did he run boot test before soldering a new c2649. I just saw he took/tick it off and then he was done ✅
Starting at 10:47, after removing the c2649, he took care to measure the diode value from empty pads, so he found that the value was normal. Which means that this problematic comes from c2649. So he replaced the c2649 and then tested
Evangéliste Jean Paul MUTOMBO NSAPU thanks for the clarification. I got confused because he didn’t show the process of putting a new c2649, but I should of assumed he did. Thanks! :)
Hello, what is the price of the online courses?
Could you remove iCloud lock from iPhone X
Hi Abdullah, while we dont have solution for unlock the iCould.
REWA Technology oh ok
REWA Technology thanks for the reply
iam waiting
I am interesting become online students , how process ?
Welcome to visit our official website ( academy.rewa.tech ) for experiencing free case courses.
Or feel free to contact us at academy@rewatechnology.com for any questions.
Thanks for your interest :)
aduh telat.. untung kagak di hapus..
Iam from algeria
Still waiting sir
一个中国公司的视频，为何就是不给一个中文CC呢？
因为他的客户是外国人
here i am
Please sir in hindi language translate
Só show
TESLA
8 minutes....
Waiting...👏🙌
Waiting