as you stated, you cannot go wrong with either a PO7 or a P10C. I had a full size PO9 and it was a wonderful shooter with the Omega trigger system. I wanted a traditional all steel CZ so I traded the PO9 for a new SPO1 model and I preferred the PO9 trigger after I got used to the SPO1 trigger. Kinda wish I had originally purchased a PO7 but thats water under the bridge. If it was me, I would go with a PO7 over a P10C because I like DA/SA pistols especially with decockers.
Thanks for the vid BigJ. Have both, love both. Looked up the polymer armor from comments in the chat, already knew about the polyethylene - my bias though, really care about rifle rated armor so kind of forgot about the polyethylene-only plates.
Can't you actually get a higher grip on the P10C? Although the P-07 has the internal slide rail, resulting in a (seemingly) lower bore axis, the physical beaver tail actually gets in the way when utilizing a higher grip. On the P10C, your hand/grip is naturally higher on the gun. When you were holding both guns in this video, the distance between your hand and the back of the slide/barrel was visibly shorter on the P10C, than on the P-07. Doesn't that technically result in a lower bore axis?
You should try the hb industries trigger kit for the p10 if you haven't already. I kept factory springs but used the trigger shoe. Feels a lot like the apex trigger. I'm after a third p07. On my third p10 but I've kept this one and the other two I hated for nitpicking issues.
@@BigJohnsonGG I AM WORRIED ABOUT THE CZ P10C OVER THIS WEAK STRIKER SAFETY BLOCK, CAN YOU PLEASE DO A VIDEO REVIEW AND ANALYSIS OF THIS SERIES OF VIDEOS ON HIS CHANNEL th-cam.com/video/rKIUpTDbn6o/w-d-xo.html ..................... www.reddit.com/r/CCW/comments/cqshim/psa_the_cz_p10c_appears_to_have_no_functional/
Hi where did you get your P10C milled for the Holosun? It's unique in that they milled it in front of the existing Suppressor height rear sight. ..which is different than other shops who mill the optics cut where the existing rear sight is and mill a new rear sight dove tail. Did you have any issues with it? Do you like their mill work? - Thanks.
Any experience or thoughts on the p-10s? I have a p-10c, and plan to get a p-07; but have considered the s for carry. Thanks for the great video, and I really like that p-07 frame work. I initially was not a big fan of the p-10c work, but like it better and better the more I see it!
I run my p10s with the mag extensions, its a great gun , my P07 is my main EDC I’ve gone away from it a few times over the years but I always go back to it , for me it’s the perfect do all pistol 🤘🏼
Just watched a video of a cz p09 with the grip cut off to take p07 magazine so he could conceal it better I think it looks good .like some cut the grip on a glock 17 with the 19 grip
P07 for me any time. I love my OD P07. I have carried mine while on TX Army National Guard duty for a few years and it is perfect. Looking to get another P07. I am up to 3 P09s now. Love the P07/P09 handguns for sure.
I just need the s and a p09 and ill have the entire series of the 07,09 10. Need to get aleast one metal cz tho and a glock 20 just for shits and giggles
I have the PCR and it’s very nice. I do want the p01 omega though, same trigger system as the 09 and 07, and extremely easy to install the full cajun package in and polish the parts. My p07 polished and cajun set is really fun to shoot and one of the lightest smoothest triggers I have
Thanks for the great video. I really want to get a CZ handgun. I have been thinking the P10C or the P01. What are your feelings about the P01 vs the P07?
PO1 is all steel or alloy and the PO7 is poly. Sights on the PO1 are not as good as the PO7. PO7’s trigger is not as curved as the PO1 and this makes it more comfortable. I’d say go with PO7
Nice video Big J! I carry a P10C w/ RMR (dovetail in front of optic) and SF X300U-B. I actually removed my Primary Machine comp but still run the their fluted threaded barrel. Any reason why you milled the RDS in front of the factory dovetail?
I have been looking for the P10C Optic version since it came out...cannot find it anywhere. Come on CZ step it up. A P-07 w/ factory optic cut would be a solid option as well.
Which is better on duty or for conceal or for ipcs? Trigger of p 10 is so so smooth. I dont know about p 07 . P 07 looks like phoenix fusion compact. Phoenix fusion compact is perfect gun for everything. But i dont choose it because phoenix is a new company....... So is p 07 so good as phoenix fusion compact ????
Phoenix is an awesome company and build great guns..they use to be Sphinx. The P-07 is a DA/SA polymer gun, it’s a great gun for the price. The DA trigger is pretty heavy. Carry on
@@BigJohnsonGG so phoenix fusion compact is better than cz p07. P 07 could be good as phoenix with aftermarkets? I live in Greece so not many People have phoenix.......
@@BigJohnsonGG i understand. I only think this. That a company closed and after that another company start . So the other is new , is baby. We dont know if it will close or if we will have problem about accessories ect ect !
Link & Disc Code In Description!
Thanks for Watching, Carry On! 🇺🇸
as you stated, you cannot go wrong with either a PO7 or a P10C. I had a full size PO9 and it was a wonderful shooter with the Omega trigger system. I wanted a traditional all steel CZ so I traded the PO9 for a new SPO1 model and I preferred the PO9 trigger after I got used to the SPO1 trigger. Kinda wish I had originally purchased a PO7 but thats water under the bridge. If it was me, I would go with a PO7 over a P10C because I like DA/SA pistols especially with decockers.
Can't go wrong with either one! Nice comparison.
Thanks Brother, Carry On
Good comparison. I want a p07 for appendix, just for that extra assurance. However, I'll wait till prices return to normal.
Good deal, thanks for Watching! Carry on
Some decisions are hard to make so I'll take them both👍🍻😀
That's what I did 😂
Thanks for the vid BigJ. Have both, love both. Looked up the polymer armor from comments in the chat, already knew about the polyethylene - my bias though, really care about rifle rated armor so kind of forgot about the polyethylene-only plates.
Can't you actually get a higher grip on the P10C? Although the P-07 has the internal slide rail, resulting in a (seemingly) lower bore axis, the physical beaver tail actually gets in the way when utilizing a higher grip. On the P10C, your hand/grip is naturally higher on the gun. When you were holding both guns in this video, the distance between your hand and the back of the slide/barrel was visibly shorter on the P10C, than on the P-07. Doesn't that technically result in a lower bore axis?
That p10c looks 🔥🔥
Thanks
Same like me on the P-10s. I have the grey with factory suppressor and threaded barrel and black.
Have em both love em both but I carry the 07. For me da/ sa is the way to go.
Thanks for Watching
I put the Cajun gun works $25 spring kit in my P07 and it made a huge difference in the trigger but it still safe
Glad you like it.
You should try the hb industries trigger kit for the p10 if you haven't already. I kept factory springs but used the trigger shoe. Feels a lot like the apex trigger.
I'm after a third p07. On my third p10 but I've kept this one and the other two I hated for nitpicking issues.
I’ve tried the HB Trigger before. Thanks for Watching, Carry On
Just purchased a CZ P07. Where did you get the stippling done? Laser or manual stippling?
Done by hand, Warpath stippling
The P07 also has the 22 Kadet conversion kit available for it. Which is a great option
You should follow me on IG, I just shot my P-09 Kadet today. Carry on
@@BigJohnsonGG I AM WORRIED ABOUT THE CZ P10C OVER THIS WEAK STRIKER SAFETY BLOCK, CAN YOU PLEASE DO A VIDEO REVIEW AND ANALYSIS OF THIS SERIES OF VIDEOS ON HIS CHANNEL th-cam.com/video/rKIUpTDbn6o/w-d-xo.html ..................... www.reddit.com/r/CCW/comments/cqshim/psa_the_cz_p10c_appears_to_have_no_functional/
Thanks for the info
Thanks for Watching, Carry On
Hi where did you get your P10C milled for the Holosun? It's unique in that they milled it in front of the existing Suppressor height rear sight. ..which is different than other shops who mill the optics cut where the existing rear sight is and mill a new rear sight dove tail. Did you have any issues with it? Do you like their mill work? - Thanks.
Fire 4 Effect, I have a separate detailed vid on it. No issues at all & yes they do awesome work. Thanks for Watching, Carry On
Any experience or thoughts on the p-10s? I have a p-10c, and plan to get a p-07; but have considered the s for carry. Thanks for the great video, and I really like that p-07 frame work. I initially was not a big fan of the p-10c work, but like it better and better the more I see it!
I’m not a fan of the S, I can only get like 2 fingers on the grip. Thanks for Watching, Carry On
I run my p10s with the mag extensions, its a great gun , my P07 is my main EDC I’ve gone away from it a few times over the years but I always go back to it , for me it’s the perfect do all pistol 🤘🏼
Just watched a video of a cz p09 with the grip cut off to take p07 magazine so he could conceal it better I think it looks good .like some cut the grip on a glock 17 with the 19 grip
P07 for me any time. I love my OD P07. I have carried mine while on TX Army National Guard duty for a few years and it is perfect. Looking to get another P07. I am up to 3 P09s now. Love the P07/P09 handguns for sure.
hello my fellow Texan great video
Thanks Brother 🤘🏼 Carry On
I just need the s and a p09 and ill have the entire series of the 07,09 10. Need to get aleast one metal cz tho and a glock 20 just for shits and giggles
I have the PCR and it’s very nice. I do want the p01 omega though, same trigger system as the 09 and 07, and extremely easy to install the full cajun package in and polish the parts. My p07 polished and cajun set is really fun to shoot and one of the lightest smoothest triggers I have
I have both. I like 07 better right now. P10 trigger pinch even after trigger change.
P-07 is a great gun as well. Carry On
I love CZ P-07👍👍👍
Thanks for the great video. I really want to get a CZ handgun. I have been thinking the P10C or the P01. What are your feelings about the P01 vs the P07?
Thanks, I have a vid vs those 2 as well. Carry on
PO1 is all steel or alloy and the PO7 is poly. Sights on the PO1 are not as good as the PO7. PO7’s trigger is not as curved as the PO1 and this makes it more comfortable. I’d say go with PO7
Nice video Big J! I carry a P10C w/ RMR (dovetail in front of optic) and SF X300U-B. I actually removed my Primary Machine comp but still run the their fluted threaded barrel. Any reason why you milled the RDS in front of the factory dovetail?
Thanks, to be different. Carry on
i know it wasn't about the p09 but it might be worth mentioning both of these guns will take the mags from that gun as well
I have a P-09 vs P-10f vid and I also share that. Thanks for Watching, Carry On
@@BigJohnsonGG missed that one, i'll have to check it out
Is it easy to install red dot optic on 07?
Yes, If you have it milled for your optic 1st. Carry on
thanks
You should do a video on how you holster your handgun or ways to safely holster a handgun. It is a video many people need!!!
need video on comp vs no comp with same ammo
They help..Done! 😂
They ;look great
I have been looking for the P10C Optic version since it came out...cannot find it anywhere. Come on CZ step it up. A P-07 w/ factory optic cut would be a solid option as well.
Which is better on duty or for conceal or for ipcs?
Trigger of p 10 is so so smooth. I dont know about p 07 .
P 07 looks like phoenix fusion compact. Phoenix fusion compact is perfect gun for everything. But i dont choose it because phoenix is a new company.......
So is p 07 so good as phoenix fusion compact ????
Phoenix is an awesome company and build great guns..they use to be Sphinx.
The P-07 is a DA/SA polymer gun, it’s a great gun for the price. The DA trigger is pretty heavy. Carry on
@@BigJohnsonGG so phoenix fusion compact is better than cz p07.
P 07 could be good as phoenix with aftermarkets?
I live in Greece so not many People have phoenix.......
@@ΧΡΥΠΟΥ P-07 is a great gun for the $, the Phoenix is much more expensive. It’s like a Rolex vs a Timex watch.. just one is more high end.
@@BigJohnsonGG i understand. I only think this. That a company closed and after that another company start . So the other is new , is baby. We dont know if it will close or if we will have problem about accessories ect ect !
5 minutes of ad's before you can watch what you want to watch. TH-cam has become overly commercial.
I don’t place all those ad’s YT does. Thanks for watching.
@@BigJohnsonGG I know & it's TH-cam.
😍😍😍😍