putting the sensor forward is like the only logical think to do (at least for fingertip and claw), i hate neutral position and even converted my fk2b to MM731 PCB (looks very similiar to the MM712) because of that
Great video, interesting insights on how the internals of this mouse look, definitely did not expect such a humongous battery to be in there! Also do you by any chance happen to know if there are heavier clicks in existence to be put in those slots for the mains? Thanks in advance!
im just curious, may somebody reply this question. can somebody tell me if the old MM710/711 "scroll wheel" can fit into this MM712 mouse? it might be interesting if it can no?
Ok I opened it and saw a hair stuck in the mouse wheel, removed that and it fixed my issue. Also managed to get the original skates back on without damage. Just heated them VERY lightly with a hair dryer and peeled them. After repair, put the skates back on and heat very gently one by one to reactivate the glue, then it looks good as new!
Did you manage to fix that side button ? Mine fell yesterday (and it still looks intact) so im wondering if Its something that can be fixed by slotting it in right back @@mochabean5042
is it possible to replace the Huano Green dots with kailh 2.0s??? what i mean is like would they work if i just desolder the originals and put the 2.0s in?
I just got two dead Batteries (602535) And I cant find any replacement for them because of the 3 Cable solution do you have any tips? .. Just dont want to get a third mouse with the same Battery defect..
Hola Bob me encantan tus videos una pregunta quiero remplazar la batería de mi cooler Master pero las baterías que encuentro solo tienen dos cables y está del coolermaster tiene 3 afecta en algo ponerle solo 2 ?? Y cuáles debo conectar y cuál debo dejar fuera muchas gracias
Similar size to mine ngl, although I used to main the pincer before going to knuckle claw grip. Would suggest the Pulsar Xlite Mini, X2(either sizes but I prefer the smaller one for claw personally), Orochi V2, Aria or this MM712. Superlight felt a little too high for me at the fingers but might work for you. My best suggestion, if you can afford it, is either MM712 or the X2.
@@borna193 haven’t tried Atlantis Mini or Sora but would advice against the latter. Heard a lot of qc and based on how the size looks, I don’t think its a good idea. Unless you’re a sweaty gamer, I would suggest the MM712 due to its feature and versatility. If you’re actually sweaty, I would suggest that you should wait till the X2-H comes out since the hump would be higher and the sides are thinner. Not sure what the price may be but, yeah it do be like that sometimes 😂
Can you please send me a link where I can buy a smaller battery incl. Proper connector ? To easily change the battery because 10 grams are too heavy for me for a battery.
those switches are not made by omrons I believe I think their made by the same company that makes razer optical older versions first appeared in bloody mice
yes, I just did this because I lost the reciever. Shaved off 10 grams along with the side button, which also broke 6 months into using this. Still, love the weight and shape. I sadly lost the springs of the mouse main buttons while doing this, unsure about finding a replacement spring :(
Hello, have you experienced a micro click on the left mouse button in the pre travel area right before the main click? I tried two white and one black MM712, both of them had this problem with the white one, but not with the black one. A made a video about it. th-cam.com/users/shortst21oj-NPH9g
Cooler Master MM712 Review: Revolutionary Changes? th-cam.com/video/bPdvaWmMzww/w-d-xo.html
putting the sensor forward is like the only logical think to do (at least for fingertip and claw), i hate neutral position and even converted my fk2b to MM731 PCB (looks very similiar to the MM712) because of that
Pics pls?
thank you, this video was extremely helpful in taking off the main button to replace a spring
can you let me know where you got the spring?
Great video, interesting insights on how the internals of this mouse look, definitely did not expect such a humongous battery to be in there! Also do you by any chance happen to know if there are heavier clicks in existence to be put in those slots for the mains? Thanks in advance!
Love your videos thanks for still going
Thanks for enjoying and supporting me...
im just curious, may somebody reply this question. can somebody tell me if the old MM710/711 "scroll wheel" can fit into this MM712 mouse? it might be interesting if it can no?
mine MM712 started a nasty mwheel bug, scrolling up and down is registering both actions.
Same here actually, that's why I'm looking to take it apart to try clean out the scroll wheel or lube it up
Ok I opened it and saw a hair stuck in the mouse wheel, removed that and it fixed my issue. Also managed to get the original skates back on without damage. Just heated them VERY lightly with a hair dryer and peeled them. After repair, put the skates back on and heat very gently one by one to reactivate the glue, then it looks good as new!
@@bethanybellwarts thx for the heads up! I used this video as a guideline and cleaned my MM712 inside and it works good as new again.
This happened to my MM720, so I RMAed and they sent me an MM712. Now one of the side buttons broke on my MM712, haha.
Did you manage to fix that side button ? Mine fell yesterday (and it still looks intact) so im wondering if Its something that can be fixed by slotting it in right back @@mochabean5042
is it possible to replace the Huano Green dots with kailh 2.0s??? what i mean is like would they work if i just desolder the originals and put the 2.0s in?
I just got two dead Batteries (602535) And I cant find any replacement for them because of the 3 Cable solution do you have any tips? .. Just dont want to get a third mouse with the same Battery defect..
Nice2! I love that mouse! Can you do a full teardown video of the Glorious Series One Pro? Thanks man! :)
Yes will do... I think I have some on order or that were meant to be delivered .
Hola Bob me encantan tus videos una pregunta quiero remplazar la batería de mi cooler Master pero las baterías que encuentro solo tienen dos cables y está del coolermaster tiene 3 afecta en algo ponerle solo 2 ?? Y cuáles debo conectar y cuál debo dejar fuera muchas gracias
I could tell just from the M1 and M2 in the thumbnail this would be interesting.
hehe.... did you like this style of thumbnail? i'm trying a few out... glad you enjoyed the video
How does it compare to shape?
Hi bro, just wanted to ask can you recommend me a mouse? 18.5x10cm hands pincer claw grip there are so much mices i dont know which one to get.
Similar size to mine ngl, although I used to main the pincer before going to knuckle claw grip. Would suggest the Pulsar Xlite Mini, X2(either sizes but I prefer the smaller one for claw personally), Orochi V2, Aria or this MM712. Superlight felt a little too high for me at the fingers but might work for you. My best suggestion, if you can afford it, is either MM712 or the X2.
@@mt.sefuri3909 Yea, i was think the same like mm712,x2 mini, atlantis mini and maybe sora.
@@borna193 haven’t tried Atlantis Mini or Sora but would advice against the latter. Heard a lot of qc and based on how the size looks, I don’t think its a good idea. Unless you’re a sweaty gamer, I would suggest the MM712 due to its feature and versatility. If you’re actually sweaty, I would suggest that you should wait till the X2-H comes out since the hump would be higher and the sides are thinner. Not sure what the price may be but, yeah it do be like that sometimes 😂
@@mt.sefuri3909 I think will go with x2 mini, thanks for your time man, take care!
@@borna193 aye no prob, all the best👍
hi, lk optical 70m switch stiffness light or heavy?
Light
Can you please send me a link where I can buy a smaller battery incl. Proper connector ? To easily change the battery because 10 grams are too heavy for me for a battery.
At the moment I don't have a link for this connector type I had to find an older battery and use that for this mod. If I find one i'll link it.
@@Beardedbob Sounds Good, thank you.
Is it possible to remove the rear panel without taking the entire top off? I'm a fingertip user and would use it that way!
ever found something? the back hump bothers a bit
@@iqoot8325 I’m using the Pulsar Boardzy X2 mini now and it is perfect for fingertip grip.
@@unkkit151 i am waiting for atlantis thorn while using this. Back hump kinda bothers sometimes sadly
@@iqoot8325 I bet you’d like the HSK Pro!
@@unkkit151 thats bit small and pricey haha, maybe pulsar xlite v3 would save me from this headache
those switches are not made by omrons I believe I think their made by the same company that makes razer optical older versions first appeared in bloody mice
does anyone have issues with a scroll wheel? mine has started to lag after a month of usage...
mine has screws for side buttons
Can I remove the battery and use it as a wired mouse?
yes, I just did this because I lost the reciever. Shaved off 10 grams along with the side button, which also broke 6 months into using this. Still, love the weight and shape.
I sadly lost the springs of the mouse main buttons while doing this, unsure about finding a replacement spring :(
It uses light strike switches?! WHAT?!
can you mod it tho ??
110% it’s already been done the video is being edited 👍
Hello, have you experienced a micro click on the left mouse button in the pre travel area right before the main click? I tried two white and one black MM712, both of them had this problem with the white one, but not with the black one. A made a video about it.
th-cam.com/users/shortst21oj-NPH9g