Thanks for posting this video. I was able to find a .5 needle and a .5 nozzle. It has been hard to find info as to whether I needed a different Nozzle cap. I wish It was clearly printed on the package or online vendor descriptions. Th HP-CS is a pretty common airbrush but it's hard to find info online as to what is compatible. Most descriptions just refer to other models abbreviations but don't list HP-CS. I'm pretty new to airbrushing and it seems like most parts sellers list their parts description for experts to read and understand exactly what you need or what is compatible with each model. Your video is clear thorough and easily understood by an amateur like me
The only thing I do differently than this video is needle placement with in the airbrush itself, which 99.9% of the time is when I clean it. I always put the needle back in butt end first through the front, then nozzle, etc. If the butt end on the needle gets ever so slight dinged no big deal. If the front end of the needle gets dinged - it IS a big deal which means going to my airbrush needle sharpener or in the worst case a new needle altogether. Just some thoughts.
Thanks CSM first. Luckily to find this only vid as I took a lot of time to find out if 0.5 nozzle cap is required. Knowing that argument to have the 0.5 nozzle cap for conversion still exists, I tested with my own HP-CS with new 0.5 nozzle and 0.5 needle but without changing of the original nozzle cap. I found the 0.5 converted airbrush works very well with fast, heavy and even spraying by using AV paints, although I have no idea how good if a 0.5 nozzle cap is added. I have reverted to 0.35 setting as the original setting has been working very well under AV paints.
Man you just saved me a lot of money, time and frustration. Trying to get pearlized to spray correctly through the 0.35 was a pain. This is going to work out just fine for me. Thank you
I appreciate the common sense approach. Your info was really timely as I want to change my needle to a 0.50mm and this cetainly will do the trick. Good stuff! Cheers, Cork
Follow-up: Your info is right on the money. I did as you instructed, and it took me less than 5 minutes to replace the .35 with the .50mm. Good, no b.s. information! Take note all you how-to gurus. This man knows what he is about!
Amazing video!! Can I ask you if there are any problems with the "Needle Packing Screw Set"? Isn't it too tight? This video is enlightening! Greetings from Italy:)
For my application, very large O scale model trains, we shoot a lot of area. I use an HP-BCS siphon bottle with the .5. I added an adjustable tail piece from the custom micron series, a huge plus, giving me pre-set max spray for the finer areas. I have been thinking about another Iwata in .3 for close in work.. Probably don't need siphon for detail work... but would not mind duplicating my existing brush and just converting it to .3..
Nice video, interesting conversion 👍✌️😊 Looks like Iwata have improved their nozzles to a one piece which is easier to clean?🤔 The small tips were a 'mare for aging eyes and hands.🙄😄
Thanks, I just bought the .5 needle and nozzle, but I wasn’t sure if I talked nozzle just popped off or not. Have a few cars to paint and it’s a pain with the .35 needle.
My question is, why would Iwata sell a 0.5 $40+ nozzle cap if you only need a .5 needle and .5 nozzle to convert. I noticed your Eclipse doesn't have the slots on back cover, could it be your Eclipse hp-cs is older, hence No need for .5 nozzle cap? Just wondering. Thanks Alot for video, you might have saved me some money here, Much Appreciated
@@CustomScaleModels actually you're wrong. I was sponsored by Iwata and built custom airbrushes. The nozzle tip is larger in a .5 than a .35 a .35 nozzle cap will have a line etched around it. A .5 is smooth. If you don't need it why would Iwata make two different parts. Its idiots like you that cause more problems for people because you'd rather be relevant than right. You don't get the right atomization using the wrong nozzle cap knucklehead.
I have this airbrush. I honestly thought that it came with a .5 needle to start with???? It has been awhile but I thought I've seen a video to convert it to .3??? Thanks for sharing
No the HP-CS comes with a 0.35 needle and the BCS which is the bottom feed one comes with the 0.5 needle but some people do convert them to from the .35 to the .3 for finer lines. If I’m not mistaken the only iwata airbrushes that come with the .5 needle is the BCS, BCR and the CR besides the neo for iwata
I never seen this comment but I bought a cheap master airbrush from Amazon with the preset handle and they fit the iwatas airbrushes. Master airbrush copy’s iwata design down to the same thread pattern.
Thanks for that demo. Love when someone cuts through all the useless information supposed to fire your imagination. Glad I found your video.
Thanks for posting this video. I was able to find a .5 needle and a .5 nozzle. It has been hard to find info as to whether I needed a different Nozzle cap. I wish It was clearly printed on the package or online vendor descriptions. Th HP-CS is a pretty common airbrush but it's hard to find info online as to what is compatible. Most descriptions just refer to other models abbreviations but don't list HP-CS. I'm pretty new to airbrushing and it seems like most parts sellers list their parts description for experts to read and understand exactly what you need or what is compatible with each model. Your video is clear thorough and easily understood by an amateur like me
The only thing I do differently than this video is needle placement with in the airbrush itself, which 99.9% of the time is when I clean it.
I always put the needle back in butt end first through the front, then nozzle, etc. If the butt end on the needle gets ever so slight dinged no big deal. If the front end of the needle gets dinged - it IS a big deal which means going to my airbrush needle sharpener or in the worst case a new needle altogether. Just some thoughts.
Thanks CSM first. Luckily to find this only vid as I took a lot of time to find out if 0.5 nozzle cap is required. Knowing that argument to have the 0.5 nozzle cap for conversion still exists, I tested with my own HP-CS with new 0.5 nozzle and 0.5 needle but without changing of the original nozzle cap. I found the 0.5 converted airbrush works very well with fast, heavy and even spraying by using AV paints, although I have no idea how good if a 0.5 nozzle cap is added. I have reverted to 0.35 setting as the original setting has been working very well under AV paints.
Man you just saved me a lot of money, time and frustration. Trying to get pearlized to spray correctly through the 0.35 was a pain. This is going to work out just fine for me. Thank you
This is the exact info I needed to know. I was wondering if I had to change air cap too. Glad I found your video. Thanks for the info!!
👍🏼
I appreciate the common sense approach. Your info was really timely as I want to change my needle to a 0.50mm and this cetainly will do the trick. Good stuff! Cheers, Cork
Follow-up: Your info is right on the money. I did as you instructed, and it took me less than 5 minutes to replace the .35 with the .50mm. Good, no b.s. information! Take note all you how-to gurus. This man knows what he is about!
I really appreciate that! I like to try and keep things very simple with no extras.
Amazing video!!
Can I ask you if there are any problems with the "Needle Packing Screw Set"? Isn't it too tight?
This video is enlightening!
Greetings from Italy:)
Thankyou went ahead and pulled the trigger on Amazon imma need this for primer jobs and larger models 100% great info 👍
It’s awesome for larger areas after going to the 0.5 i honestly think they should’ve came with the 0.5 from the factory
Thank you thank you thank you. I knew these could be converted after talking to iwata and couldn't find how.
For my application, very large O scale model trains, we shoot a lot of area. I use an HP-BCS siphon bottle with the .5. I added an adjustable tail piece from the custom micron series, a huge plus, giving me pre-set max spray for the finer areas. I have been thinking about another Iwata in .3 for close in work.. Probably don't need siphon for detail work... but would not mind duplicating my existing brush and just converting it to .3..
Which tail piece fit the BCS from a micron?
Thank goodness I found your video. Been trying to prime and my needle keeps clogging with the .35mm needle/nozzle
I had that same problem that’s why I converted it instead of spending another bunch of money on a different airbrush.
Nice video, interesting conversion 👍✌️😊
Looks like Iwata have improved their nozzles to a one piece which is easier to clean?🤔 The small tips were a 'mare for aging eyes and hands.🙄😄
i use a revolution 0.5 for pretty much everything and i use angelus paints . if you are using thicker paints like angelus , 0.5 is the way to go.
thank you for making this vid, your inspiration for this video is exactly how I found it haha
Thanks, I just bought the .5 needle and nozzle, but I wasn’t sure if I talked nozzle just popped off or not. Have a few cars to paint and it’s a pain with the .35 needle.
The nozzle just sticks in there. Just wiggle it around a bit( without the needle in it)
I was thinking I had to change the nozzle, needle and air cap....nice to know its just the nozzle and needle.
My question is, why would Iwata sell a 0.5 $40+ nozzle cap if you only need a .5 needle and .5 nozzle to convert. I noticed your Eclipse doesn't have the slots on back cover, could it be your Eclipse hp-cs is older, hence No need for .5 nozzle cap? Just wondering. Thanks Alot for video, you might have saved me some money here, Much Appreciated
Well you got 2 out of the 3 parts right. You also need the nozzle cap for a .5
So you might want to update your video.
You don’t need the nozzle cap to convert it to a 0.5 as the iwata HP-CS uses the same cap as the iwata HP-BCS which uses the 0.5 needle
@@CustomScaleModels actually you're wrong. I was sponsored by Iwata and built custom airbrushes. The nozzle tip is larger in a .5 than a .35 a .35 nozzle cap will have a line etched around it. A .5 is smooth. If you don't need it why would Iwata make two different parts. Its idiots like you that cause more problems for people because you'd rather be relevant than right. You don't get the right atomization using the wrong nozzle cap knucklehead.
@@CustomScaleModels there is both .35 and .5 nozzle caps for the hp-cs I made the same mistake then later bought the bigger nozzle cap
The part number is the exact same though for
Both models
@@CustomScaleModels check again lol
Almost the best 20 bucks I spent!!!
I did this to mine and air or paint wouldn’t feed. Switched back and it works fine
I have this airbrush. I honestly thought that it came with a .5 needle to start with???? It has been awhile but I thought I've seen a video to convert it to .3??? Thanks for sharing
No the HP-CS comes with a 0.35 needle and the BCS which is the bottom feed one comes with the 0.5 needle but some people do convert them to from the .35 to the .3 for finer lines. If I’m not mistaken the only iwata airbrushes that come with the .5 needle is the BCS, BCR and the CR besides the neo for iwata
Thank you for your advice, it helped 😊
Thank you!
Thank You !!! Needed to know this !!
hey how did u get a pre-set for hp-cs? the default one didnt come with the preset
I am wondering the same thing.
I never seen this comment but I bought a cheap master airbrush from Amazon with the preset handle and they fit the iwatas airbrushes. Master airbrush copy’s iwata design down to the same thread pattern.
It came from a master airbrush from Amazon. Master airbrush copies iwatas design so the preset handles fit iwata
Thank you
Thank you! saved me
👍🏼
Does this conversion make the gun have a smaller spray area ?
No it makes it larger
Are these bcs parts from hobby lobby that you added to the hc-ps?
Yes there from hobby lobby
Can i use .5 for primer and craft?
Thanks
Yes you can. That’s what I use it for
Are you able to change the needle on a bcs to a .35 also?
Yes