Mate I got a 22 r1, can you plz show me your settings in your bike for clutch wheelies. For me the bike is very aggressive for popping wheelies becos of jerky throttle.
Mode A is a bit too aggressive on the throttle, I wheelie in power mode C with SCS & TCS off. If you wheelie with SCS on and you hit balance point the bike will cut power causing you to slam your front end, ended up happening to me (very sketchy)
Just make sure you install the servo buddy before you install your new exhaust. I ended up installing my servo buddy after I installed my exhaust and the check engine light wouldn’t go away, eventually I did go away after 1-2 days. Weird.
Cant you just turn the trac control , go over the trac and hold up for 3 seconds itll turn it off and leave abs working , abs doesnt stop from a burnout thats the trac control
Not that I couldn’t wheelie with ABS, just that I didn’t want to. ABS prevents your front/rear from locking up, meaning that if I go too far back in a wheelie and I slam on my rear brake to save myself from looping, ABS may reduce braking pressure thinking I’m about to lock up the rear, leaving me without all the braking force that I need to prevent myself from looping my bike
@@wiickedwill that's a good idea. I'm gonna probably do the same thing. What yrc settings do you feel best @doing wheelies. My bikes bauce tuned. Not sure if pwr1 is to much power or not
@WiickedWill he is talking about 15-19 models, the air duct will snap when you pop wheelies becos it's a plastic. Then later yamaha changed it to light weight Aluminium metal is what I heard. The air duct in 2020+ is very strong.
It’s almost like the bike barks when you pop it up, great sounding bike and sweet wheelies!
Nice job man
Hey my brother looks amazing have you had any issues with oil starvation ive seen one or two blow from constant wheelies
Whats your settings for the power wheelies?
Mate I got a 22 r1, can you plz show me your settings in your bike for clutch wheelies. For me the bike is very aggressive for popping wheelies becos of jerky throttle.
Mode A is a bit too aggressive on the throttle, I wheelie in power mode C with SCS & TCS off. If you wheelie with SCS on and you hit balance point the bike will cut power causing you to slam your front end, ended up happening to me (very sketchy)
You changed any gearing?
Nice wheelies, what gear is that mostly?...........
2nd gear
btw, set the engine breaking to level 3, it will make the bike pop when u decelerating.
Definitely gonna have to give that a try
Performance black, my favorite of this year.
How much did you pay for it out the door if you dont mind me asking? After tax, titles, and fees.
It’s gon be a little over 20 gs out the door
@@annettecheek2910 you was close. Got my 2023 black for 19.2 with a 2 year Yamaha extended warranty.
Do you have “LIF” control completely off as well?
If he didnt, you would be able to hear it kicking in as soon as he clutches up
Hey bro on our year model r1s I learned if you do a burnout it will turn it off
I just pulled the ABS Motor Fuse, don’t really wanna waste a good tire
Why do the new bikes have so many engine light problems, I wanna get SC exhaust but don’t wanna mess anything up
Just make sure you install the servo buddy before you install your new exhaust. I ended up installing my servo buddy after I installed my exhaust and the check engine light wouldn’t go away, eventually I did go away after 1-2 days. Weird.
just get it flashed afterwards
Superbike unlimited flashed my R1m and it was only $230 went up 25 hp to definitely worth it
Cant you just turn the trac control , go over the trac and hold up for 3 seconds itll turn it off and leave abs working , abs doesnt stop from a burnout thats the trac control
Not that I couldn’t wheelie with ABS, just that I didn’t want to. ABS prevents your front/rear from locking up, meaning that if I go too far back in a wheelie and I slam on my rear brake to save myself from looping, ABS may reduce braking pressure thinking I’m about to lock up the rear, leaving me without all the braking force that I need to prevent myself from looping my bike
@WiickedWill makes sense now I was just confused
A 1 second burnout should disable abs on your bike my guy 💪
I just ended up pulling the fuse, didn’t feel like wasting my tire
@@wiickedwill that's a good idea. I'm gonna probably do the same thing. What yrc settings do you feel best @doing wheelies. My bikes bauce tuned. Not sure if pwr1 is to much power or not
@@FlexFast I wheelie in power 3. Power 1 is too twitchy
Don’t go down on the wheelies too hard the duct will snap
What will snap?
That's only for 15-19 models not for 2020+ models ha ha ha
@WiickedWill he is talking about 15-19 models, the air duct will snap when you pop wheelies becos it's a plastic. Then later yamaha changed it to light weight Aluminium metal is what I heard. The air duct in 2020+ is very strong.
🤩🇺🇸👍⚖️👁️👁️⚖️🏁🏁🏁
wtf @ 3:00 that truck just vanished…
We live in a simulation