I plan to build the following in this little devil R7 - 7800X3D RX 7900 XT ASROCK B650E PG-ITX wifi CRUCIAL 32GB Pro DDR5 5600MHz Crucial 1tb P5 Plus PHANTEKS Revolt SFX 850W Platinum Noctua NH-L9a-AM5 Cromax + NA-FD1 My reaserch tells me it will performe better due to better higher static pressure than if i put this in Ridge.
That is a Killer build Buddy! What do you plan to do with the PC? Gaming or professional work? I didnt know about the NA-FD1 existing. I should add it to the build
I recently assembled my own Fractal Terra PC and (just for fun) uploaded a video about it. Since then, other Terra buils are constantly being suggested to me 😆(thanks TH-cam algorithm) Really nice video. Great job. 👍
Hello! I enjoyed your build and was inspired to create a very similar one! PC parts picker says that I will need an adapter for some of the usb slots on the A520I mobo to route to the fractal terra ports. However, I did not see these in your video. Are they necessary and did you encounter any like problems?
Yes I wood, I have had the same case for about 1 month now and it is great. Both the graphics cards you use are dual slot so I would recommend the Noctua NH-L12S instead of the Nh-L9a.
Thank you for the comment Bro. I planned to build in a three slot GPU but a customer bought it the day i started the video. In the clip where i unbox the case, you can see the initial gpu 🥲
Hallo Bulltech! Ein wirklich schönes build. Mich würde interessieren, wie du den Front-USB-C-Port vom Fractal angeschlossen hast? Das Board hat ist doch gar nicht dafür vorgesehen. Kennst du ein M-ITX-Board für AM4? Viele Grüsse Reto
Hey, cool, dass dir so ein Detail auffällt. Ich habe tatsächlich etwas "geschummelt" und einen USB 3.0 zu USB C Adapter eingebaut. Dazu noch einen HUB, um den vorderen USB A Stecker auch daran schließen zu können. Wer Fullspeed USB C vorne braucht, dem empfehle ich ein passende(re)s Board zu kaufen. Grüße, Burim 🙂
Ich hatte den PC anschließend weiterverkauft. Der Käufer fand den PC geil. Ihm war es wichtig, dass der PC beim Zocken nicht sehr laut wird und gute Leistung bringt. Das hatte er mir nach ein paar Tagen bestätigt. Er hat mir dann aber kein langfristiges Feedback abgegeben 😁 ich gehe aber Mal davon aus, dass alles glatt lief und dass er immer noch zufrieden ist, sonst hätte ich etwas gehört 😊
I really like this case, wonder if a 4080FE would fit. Good video! Worth the wait! .. Oh.. and just noticed your "hint" at the end.. lol.. I' m playing D4 on it.
@@xan_02 no, you wont need a BIOS update. But i would recommend you to test the board with the CPU installed before building the whole ITX pc. Since i cannot guarantee that it will work. I ordered the same board 3 times and everytime it worked with 5000 series out of the box
No I woodnt. Dumb to build an am4 system rn, when am5 is barely more expensive, and the 3070 was always a not great card because of only having 8gb of vram, but it's much worse now..
Hey my friend, over here in Germany and also in the US, prices for AM5 (CPU + ITX Board) are about 100% higher. But i totally agree with you. I put in the 3070 because i didnt have any other gpu. In the description i also tag another gpu, since i think there are better options. With my initial question „wood you build this“ i honestly didnt mean the hardware but the case/ fans since i do Not do technical Reviews on my channel but only show the aesthetics of my pcs 😊
Hey man, yeah thats a nice build. I would maybe go with an RTX 3060 Ti instead of an 4060 Ti, since its 100 bucks cheaper and performs more or less the same. There is also a 16GB version of the 4060 Ti, but i really doubt that it can make use of them^^
@@bulltech20 I don't talk about design, the Terra is good but the concept of North is ridiculous, why ? Because it's just a fad to say "you see, I have wood on my PC so it's classy !" when not at all. The top can't even be removed anymore like old Fractal ATX cases, the fans on the front are screwed from the inside if you don't put an aio, the location of the fans on the side touches the aircooler, they haven't improved the rail on the front fans which creates turbulence with fans, even with Noctua spacers. There is a side metal thing which hides the view of the RAMs which is ridiculous (for me) It's like NZXT, these are cases for marketing purposes to look "beautiful" on video, that's all, once at home if you are not demanding and you don't touch your PC it will be "good" but if you are demanding and want a practical case for its price, it will be bad. Terra is good because is just an ITX case but nothing is perfect. But I'm just sick of this fashion of creating stuff just for beauty and marketing, when you look at the Meshify or even the Define, they blow up the North on the practical side. In reality, only the 4000D Airflow could not satisfy me, I dust my forehead and my top panel every day and only the 4000D Airflow has panels / dust filters that can be easily removed without wearing out the case in the long term, filled with Noctua beige/brown with premium cables of the same color with DDR5 dominators in subdued orange, I love watching my PC every day.
i am going to be building a SFF case later this year. i considered this case strongly and it looks great. I have also considered the Dan C4-SFX v4.1 but i cant find it in stock. i really like that case is built for air cooling and you dont need to fuss with a riser cable. But at the end of the day they are both closed boxes and i just like to be able to look inside my case and view my handiwork so likely i'm going to build in the Coolermaster NR 200P ( i helped my granddaughter build her first computer in one of those) or possibly a Lian Li Tu150 (another case i have built in, a computer for my wife) which is also amenable to air cooling. Both have TG side panels but i am leaning to the NR200P as its smaller and i na way a bit more challenging to build in. But if i were to build a closed box system the Terra would be near the top of my list if not at the top. Great job on your build.
Thank you very much! I have a video on the NR200P in white on my channel too and in a few weeks, i will cover the black version as well. In my personal opinion, i think the NR200P is the better Choice for aesthetical reasons. As you said, i like to look into my pc
Please make sure to like and subscribe. It really helps growing the channel and makes more and more videos like this possible
🤜🤛
If you wonder what the next video will be about, look for the hint I put in this project. 🥶
Epic
Thank you man 💪
First?
bro you were here before i even noticed that its online already haha 💙
Steam machine.
I plan to build the following in this little devil
R7 - 7800X3D
RX 7900 XT
ASROCK B650E PG-ITX wifi
CRUCIAL 32GB Pro DDR5 5600MHz
Crucial 1tb P5 Plus
PHANTEKS Revolt SFX 850W Platinum
Noctua NH-L9a-AM5 Cromax + NA-FD1
My reaserch tells me it will performe better due to better higher static pressure than if i put this in Ridge.
That is a Killer build Buddy! What do you plan to do with the PC? Gaming or professional work?
I didnt know about the NA-FD1 existing. I should add it to the build
@@bulltech20 both.
I recently assembled my own Fractal Terra PC and (just for fun) uploaded a video about it. Since then, other Terra buils are constantly being suggested to me 😆(thanks TH-cam algorithm)
Really nice video. Great job. 👍
haha thats funny, your video is being suggested on my start page too. ofc i watched it + subbed, great work with your "asmr-ish" build :D love it!
I modified my TerraCase…it’s very quite now ! (CPU max: 55°C, GPU max: 50°C in gaming) th-cam.com/video/wK2WqvM7IFQ/w-d-xo.htmlsi=P1FoS_gAV7ay8sic
damn bro very nice one :-)
@@bulltech20 thx! 😃
Hello! I enjoyed your build and was inspired to create a very similar one!
PC parts picker says that I will need an adapter for some of the usb slots on the A520I mobo to route to the fractal terra ports. However, I did not see these in your video. Are they necessary and did you encounter any like problems?
Like your ASMR and slow-motion/close-up shots👍
Thank you mate 💪
Do you guys know if I can put an rtx3070 323mm in this case?
the manual says it supports up to 322mm... it might fit using some pressure^^ but I cannot guarantee
@@bulltech20 thanks for the answer But I had mistaken the data with my 7900xtx The 3070 fit perfectly with 272mm😅
Yes I wood, I have had the same case for about 1 month now and it is great. Both the graphics cards you use are dual slot so I would recommend the Noctua NH-L12S instead of the Nh-L9a.
Thank you for the comment Bro. I planned to build in a three slot GPU but a customer bought it the day i started the video. In the clip where i unbox the case, you can see the initial gpu 🥲
Why do you recommend the NH-L12S instead?
@@georgechri1e7s344 it is higher and gives better cooling performance. Since i used a 2 slot gpu, we could go with a beefier cpu cooler 😊
@@georgechri1e7s344 Bigger cooler with better cooling and lower noise.
Hallo Bulltech! Ein wirklich schönes build. Mich würde interessieren, wie du den Front-USB-C-Port vom Fractal angeschlossen hast? Das Board hat ist doch gar nicht dafür vorgesehen. Kennst du ein M-ITX-Board für AM4? Viele Grüsse Reto
Hey, cool, dass dir so ein Detail auffällt. Ich habe tatsächlich etwas "geschummelt" und einen USB 3.0 zu USB C Adapter eingebaut. Dazu noch einen HUB, um den vorderen USB A Stecker auch daran schließen zu können.
Wer Fullspeed USB C vorne braucht, dem empfehle ich ein passende(re)s Board zu kaufen.
Grüße, Burim 🙂
Hallo Burim! Kannst du mir den Link zu dem HUB teilen? Ich glaube es gibt aktuell gar kein AM4-Board mit USB-C. Viele Grüsse Reto
Moin echt Nice funktioniert das System gut? Will es nachbauen
Ich hatte den PC anschließend weiterverkauft. Der Käufer fand den PC geil. Ihm war es wichtig, dass der PC beim Zocken nicht sehr laut wird und gute Leistung bringt. Das hatte er mir nach ein paar Tagen bestätigt. Er hat mir dann aber kein langfristiges Feedback abgegeben 😁 ich gehe aber Mal davon aus, dass alles glatt lief und dass er immer noch zufrieden ist, sonst hätte ich etwas gehört 😊
🔥 🔥 🔥 build out of all the builds I've don't I still haven't done an itx 😅 nice build love that case
Then go on a give it a try 👌 you will be surprised how small itx pcs are (and also how annoying cable management can be) 🤣
A custom keyboard missing
nice was thinking of doing similiar build, what temps like
I will check them and give you an update. 👌
I've seen the bottom fan as either intake or exhaust. Which did you choose and why?
In my case, it is for intake. But honestly, i could also let it empty since it doesnt make a difference for my mid tier hardware
I bought one with a 7800x3d and it runs on the warm side
Yeah, i think it might run hot in an ITX build. You could try to undervolt it, that should make a big difference.
@@bulltech20 may put it under water
What temps are you getting idle / gaming? I’m planning on building with that cpu
I really like this case, wonder if a 4080FE would fit. Good video! Worth the wait! .. Oh.. and just noticed your "hint" at the end.. lol.. I' m playing D4 on it.
Nice to have you back here Bro. Highly appreciated comment 👌
It will but gives you the minimum for CPU cooler clearance, the Asus ProArt fits and will give you 70mm for a CPU cooler.
@@richardfarmer6570 thank you for the reply. It seems i forgot to do so 😊
No. And this is coming from an ITX fan. I just built a Fractal North with a 4090 and everything felt super tight. Let alone something like this.
Thanks for the comment Bro, but what do you mean by tight? And also i dont get it. Im building in the Terra and not the North 🧐
If only the fins ran the other way on that cooler... Its exhaust looks almost sealed off between the ram and back io shroud
actually, I could have went with a bigger cooler instead of the small noctua one. that would fix the issue
Nice build, just curious the case fan that you placed at the bottom, was that the Phanteks T30 😮
thank you. no its the Noctua NF-A12 PWM fan. you can find it here amzn.to/3q5UX7b (and also in the video description)
Wtf is that music?
Haha Sorry Bro, there was a new musician in the TH-cam music Library and i thought the oriental vibes could fit 🤣🤣 Thanks for the feedback 💪
@@bulltech20 I actually had the playback at 1.5 from another video and it sounded bizarre when I first listened to it lmao
🔥🔥🔥❤️
💪💪
Wish my Rx 7900xtx would fit into this so I could do a sick build like this one!
a 7900 xtx in this case... 🤩 which model do you have?
@@bulltech20 OC gigabyte
Pretty nice bro
thank you bro! :-)
could you go through the software updates you needed as I want to build in the same case and use the same motherboard
Hey, there werent any Updates needed. Just put in the CPU and you Are good to go. The board came with support for Ryzen 5000 out of the box
@@bulltech20 oh so i didnt need to do anything with the BIOS, or the PCIE
@@xan_02 no, you wont need a BIOS update. But i would recommend you to test the board with the CPU installed before building the whole ITX pc. Since i cannot guarantee that it will work. I ordered the same board 3 times and everytime it worked with 5000 series out of the box
No I woodnt. Dumb to build an am4 system rn, when am5 is barely more expensive, and the 3070 was always a not great card because of only having 8gb of vram, but it's much worse now..
Hey my friend, over here in Germany and also in the US, prices for AM5 (CPU + ITX Board) are about 100% higher. But i totally agree with you. I put in the 3070 because i didnt have any other gpu. In the description i also tag another gpu, since i think there are better options.
With my initial question „wood you build this“ i honestly didnt mean the hardware but the case/ fans since i do Not do technical Reviews on my channel but only show the aesthetics of my pcs 😊
Perfect for LAN Parties 😆
oh man the good old lan party days 😁 I wish we had pcs like this back then
nice but no case stock gg
Yes, stock i a problem
I’m about to build in mine. Planning on going ultra low power draw this time around, might do a Ryzen 7600 and an RTX 4060/4060Ti.
Hey man, yeah thats a nice build. I would maybe go with an RTX 3060 Ti instead of an 4060 Ti, since its 100 bucks cheaper and performs more or less the same. There is also a 16GB version of the 4060 Ti, but i really doubt that it can make use of them^^
All PC should be like that honestly.
I think so too Bro. The new fractal North and terra cases speak a very nice, „ikea like“ design Language which i really enjoy
@@bulltech20 I don't talk about design, the Terra is good but the concept of North is ridiculous, why ?
Because it's just a fad to say "you see, I have wood on my PC so it's classy !" when not at all.
The top can't even be removed anymore like old Fractal ATX cases, the fans on the front are screwed from the inside if you don't put an aio, the location of the fans on the side touches the aircooler, they haven't improved the rail on the front fans which creates turbulence with fans, even with Noctua spacers.
There is a side metal thing which hides the view of the RAMs which is ridiculous (for me)
It's like NZXT, these are cases for marketing purposes to look "beautiful" on video, that's all, once at home if you are not demanding and you don't touch your PC it will be "good" but if you are demanding and want a practical case for its price, it will be bad.
Terra is good because is just an ITX case but nothing is perfect.
But I'm just sick of this fashion of creating stuff just for beauty and marketing, when you look at the Meshify or even the Define, they blow up the North on the practical side.
In reality, only the 4000D Airflow could not satisfy me, I dust my forehead and my top panel every day and only the 4000D Airflow has panels / dust filters that can be easily removed without wearing out the case in the long term, filled with Noctua beige/brown with premium cables of the same color with DDR5 dominators in subdued orange, I love watching my PC every day.
i am going to be building a SFF case later this year. i considered this case strongly and it looks great. I have also considered the Dan C4-SFX v4.1 but i cant find it in stock. i really like that case is built for air cooling and you dont need to fuss with a riser cable. But at the end of the day they are both closed boxes and i just like to be able to look inside my case and view my handiwork so likely i'm going to build in the Coolermaster NR 200P ( i helped my granddaughter build her first computer in one of those) or possibly a Lian Li Tu150 (another case i have built in, a computer for my wife) which is also amenable to air cooling. Both have TG side panels but i am leaning to the NR200P as its smaller and i na way a bit more challenging to build in. But if i were to build a closed box system the Terra would be near the top of my list if not at the top. Great job on your build.
Thank you very much! I have a video on the NR200P in white on my channel too and in a few weeks, i will cover the black version as well. In my personal opinion, i think the NR200P is the better Choice for aesthetical reasons. As you said, i like to look into my pc
@@bulltech20 Thanks i'll check it out!
The C4 was a limited run wont be made again until version 2 in 2024
@@RathOX thanks