Great choice on the Link ECU mate! They're made in my home town of Christchurch, New Zealand! Always amazing to see them being used in peoples cars around the world!
I've just discovered your channel and I'm loving these videos. Just managed to get hold of a blacktop and am looking forward to doing something with it in the future. Had to buy some stcikers too as I'm a bit obsessed with stickers 😂. Thanks from the UK 🇬🇧
Keep going! The car is really coming together. I'm still amazed that I am able to watch the car be put together with the level of care that I had hoped to achieve.
Cars looking awesome man love your style. A filter relocation or even some heat shielding on that filter should help keep oil temps down, but please don't space it even closer to headers!
Yeah the blacktop uses oil fast, have to change my oil every 3k kilo's, I'm not running any cooler in my ae111 though, your setup is dope! looking forward to another upload
Hey, wondering if you have any quick answers about tuning your COP setup. Is it running sequential ignition? Are you getting your cam position signal off the distributor?
i am about to go look at a pretty clean example of an AE86 sr5 coupe, and i want to do the gts rear end conversion, and have done plentiful research on all of that. however, in my times of research, i've found that a 20v swap is typically the best so i am deciding to go that route if i end up getting the car. however, i want to get all of my research done before i even purchase the car. how difficult is this swap in comparison to one that would require full custom work? are parts readily available similar to other cars such as my current one? (350z) i just want to make sure i have everything clear before going into this project as it is my first serious build. thanks in advance!
Why did you end up going with the ecu/coilpacks? I only ask because I wanna do a 20v swap and actually prefer the look of the relocated distributer, and it would be cheaper :/
I have a corolla with a 4age but it has the 16v efi head. Do you think i could cop one of these heads and just slap it on there with maybe a new computer as well?
If you don’t mind sharing: what issues did you have with the old (factory relocated) ignition setup? Havr one like that myself but I am still working on the car so have no real life experience with it, only a couple drives around the block. If there are real issues with such a setup I might look into going COP. Thanjs
Hey riley! Is it hard or complex to street tune? I kinda want to get an aftermarket ecu for my 1986 fc so i can squeeze some more power from my streetport but i never tuned before :/
yay I found my name in the list!! so stoked to being able to support this build and its future!
me too! I can't wait for my stickers lol my car be waiting
oil temp is high because the oil filter is so close to headers. Wrap or shield inbetween will get those temps down
13:37
Your dry humor and sarcasm in your videos always entertain me and make me laugh. The BEST on You tube bar none.
Great choice on the Link ECU mate! They're made in my home town of Christchurch, New Zealand! Always amazing to see them being used in peoples cars around the world!
I love those old analoge gauge clusters. Personally I prefer that over the computerized screens they have now.
It’s crazy how I own an ap1 S2000 and a 17 WRX yet I still fanboy over the AE86, I hope to find a hatch one day. It’s one of my dream cars!
A Nardi Eleganza would look perfect in this
I've just discovered your channel and I'm loving these videos. Just managed to get hold of a blacktop and am looking forward to doing something with it in the future. Had to buy some stcikers too as I'm a bit obsessed with stickers 😂. Thanks from the UK 🇬🇧
Keep going! The car is really coming together. I'm still amazed that I am able to watch the car be put together with the level of care that I had hoped to achieve.
Cars looking awesome man love your style.
A filter relocation or even some heat shielding on that filter should help keep oil temps down, but please don't space it even closer to headers!
Love your videos love from Sydney Australia
Thanks for sharing such a fine 86 you've built with us it's come a long way. Nice wrench repurpose too ha.
15:00 I really hope that bag was sealed LOL
man i would love to have an ae86 one day just parked on the side of the road enjoying the view, awesome progress!
I know you dumped all that brake clean and schmutz on the ground when you dropped that bag lol.
u can use obd2 scanning now, that's so neat.
untimely 86 update appreciated as always, comin along great! OBD2 upgrade is a massive W
Nah bro gotta go full rice with A pillar gauges haha
If you haven't already you could try an acid based wheel cleaner to try and get those stains out
Les Schwab does powder coating and it’s pretty affordable if you have one near you
Thanks for the 24mm wrench coil pack holder idea lol
Yeah the blacktop uses oil fast, have to change my oil every 3k kilo's, I'm not running any cooler in my ae111 though, your setup is dope! looking forward to another upload
Damn..that coils bracket is sick!! i love it man.
Best series on youtube , gives me more motivation to go swap my Miata
Do it! I’ve yet to see a Miata with a 4age 20 valve swap 😀
Bro! I have a Ae86 And your videos help me a lot, both as inspiration and as a guide, because I plan to make a 20v or beams swap
Wrap the header or wrap the filter or both
If you're on stock cams idle should be around 850 from memory.
I have a silvertop that looks clean like that. Really hope I can get a space so I can swap my aw11. Thanks for more motivation riley
Very clean and nice can't wait to finish my 2rz ae86 turbo i am just get parts little by little
cant wait Great Video's dud
hey love the videos! Also live in washington and just recently put a "collector's vehicle" on my AE86 GTS hatchback.
Glad your back man always lookin forward to your notifications 💯
Nice man
love your vids
Sorry I'm late! Awesome seeing my name and even more awesome knowing you've uploaded :)
Have the wheels vapor blasted then have them powder coated
such an awesome 86
okay champ where's the next video
hand it over
Bro is that an ae101 in the background! Review it!
Wagon too 🤤 so delicious
I've been waiting for a video. Finally!
Old club4ag members should know about the shaving of the coils.
Hey, wondering if you have any quick answers about tuning your COP setup. Is it running sequential ignition? Are you getting your cam position signal off the distributor?
Probably would have been a good idea to check and adjust the valve clearances while you had the valve cover off.
i am about to go look at a pretty clean example of an AE86 sr5 coupe, and i want to do the gts rear end conversion, and have done plentiful research on all of that. however, in my times of research, i've found that a 20v swap is typically the best so i am deciding to go that route if i end up getting the car. however, i want to get all of my research done before i even purchase the car. how difficult is this swap in comparison to one that would require full custom work? are parts readily available similar to other cars such as my current one? (350z) i just want to make sure i have everything clear before going into this project as it is my first serious build. thanks in advance!
I've been waiting.
this should've been titled man fine tunes ecu lol awesome vid!
fine man tunes ecu
Needs more content 😭
Why did you end up going with the ecu/coilpacks? I only ask because I wanna do a 20v swap and actually prefer the look of the relocated distributer, and it would be cheaper :/
My sr5 20v will never be this dope :(
next video please!
Using alpha n tuning instead of speed density? Any particular reason?
I have a corolla with a 4age but it has the 16v efi head. Do you think i could cop one of these heads and just slap it on there with maybe a new computer as well?
Where did you get the resistor from ?
I didn’t know that ae86 had gauge sweep
It doesnt. That's a function of the link ecu
Sick!
If you don’t mind sharing: what issues did you have with the old (factory relocated) ignition setup? Havr one like that myself but I am still working on the car so have no real life experience with it, only a couple drives around the block. If there are real issues with such a setup I might look into going COP. Thanjs
Ya boi
What kinda Wideband u using?
yooo, so weird to see my name on the list, that's epic.
vincent moment
Id love to but this car
Any updates on your car?
i want to get a backyard built sticker but i didn't build my ae86 in my back yard, or at all
Yeah buddy 🎰🎰🎰🎰🎰💴💴💴💴💴
Hey riley! Is it hard or complex to street tune? I kinda want to get an aftermarket ecu for my 1986 fc so i can squeeze some more power from my streetport but i never tuned before :/
Are you like the 86
Are you going to do a head package and cams next?
unlikely but who knows!
@@BackyardBuilt itd be super enjoyable to watch you do the process for 10k rpms
@@Moneygrip I'd love to see that! ☺️
@@BackyardBuilt would you by chance know the part number on the plugs
this is the sickest 86 in the US
What was the resister you used I need to do the same to my tach please and thank you
th-cam.com/video/y2TRMWldaQA/w-d-xo.html
Excellent video on Toyota tac adaption for standalones.
For that one I use 10 ohm 1/4w
LOL, even my 4AF (carb) engine has an oil cooler from the factory.
Oil looks cooked also
Hey there. this is Liz from MXR, are you interested in any business collaboration?
420 likes, nice haha
hi
First!
Bro if you ever want to sell the corolla wagon please let me know!