I have a problem with the small metal piece used for the high beams. It also holds together the ignition linkage and the tealt (column) switch and another plastic piece and it all fits behind or between the turn signal switch. Also the wipers are on. Can't turn them off. I pulled the small cover off. 1984 Chevy Caprice.
Now this is a good video. My switch is stuck in the run position. Its a 1990 olds 88 though. But i bet its pretty much the same. I have to pull the ECM fuse and pull the battery cable off. It will turn to start but it won’t turn back to off or lock.
I have a 96 Eighty-Eight, dealing with the same issue! Key is stuck in on position. I been having to pop the hood, pull a spark plug wire, and disconnect the battery, then manually lock all doors every time I park. I am about to fix that now though thanks to this vid. Probably going to change the wiper/turn signal switch while I'm in there too as the wipers work, but stay on until I turn the car off. 🤣 Still a damn good car though. Great for the daily work commute.
@@houstoner Man i know how you feel. This video was almost 100% the same on my car. I do recommend using the steering wheel puller because i tried to get away without using it and I completely destroyed the triangle mark on my steering shaft so now i have to drive it with the wheel turned to one side. That steering shaft is stupid soft metal. But yeah i agree, these cars are completely worth it. I absolutely love mine.
Ok so I gotta change the ignition switch too then ? I had the alternator check since my battery will drain after a few starts and dies every time I slow down and idk what exactly it could be
@@SteveDavisCarGuy hey have any one y'all run to a problem where it just crank but no start battery draining out after a full charge getting fuel getting compression change out everything on the distributor new cap rotor ignition module ,the hei ignition coil but no start even change starter out but same problem grinding noise or slow start up after cranking on it Everytime any advice thanks
That was in depth stuff man, SMH.....got me hitting pause, so I can write notes and shit. LOL, great vid!!!!!
Bj Hammon Come on now Mr. Hammon this job is too easy for you 😂
My chevy start with no key is this the way u fix it?
Great guide. Bouta do my el Camino this weekend. Keep it up 😁
I have a problem with the small metal piece used for the high beams. It also holds together the ignition linkage and the tealt (column) switch and another plastic piece and it all fits behind or between the turn signal switch. Also the wipers are on. Can't turn them off. I pulled the small cover off. 1984 Chevy Caprice.
Now this is a good video. My switch is stuck in the run position. Its a 1990 olds 88 though. But i bet its pretty much the same. I have to pull the ECM fuse and pull the battery cable off. It will turn to start but it won’t turn back to off or lock.
I have a 96 Eighty-Eight, dealing with the same issue! Key is stuck in on position. I been having to pop the hood, pull a spark plug wire, and disconnect the battery, then manually lock all doors every time I park. I am about to fix that now though thanks to this vid. Probably going to change the wiper/turn signal switch while I'm in there too as the wipers work, but stay on until I turn the car off. 🤣
Still a damn good car though. Great for the daily work commute.
@@houstoner Man i know how you feel. This video was almost 100% the same on my car. I do recommend using the steering wheel puller because i tried to get away without using it and I completely destroyed the triangle mark on my steering shaft so now i have to drive it with the wheel turned to one side. That steering shaft is stupid soft metal. But yeah i agree, these cars are completely worth it. I absolutely love mine.
Great video bro thanks for this exactly what I needed
Thanks bro definitely helped. I gotta replace key lock cylinder in my buddys 1978 impala areo coupe I’m building for him.
Thanks Steve for the video this is what i need ....
I definitely lost the keys to my firebird, much appreciated
Do you have a video for door locks as well?
Appreciate the video Great job easy to follow
Glad it helped
Hi man question.. what is that little black button next to te cilinder ? Choke ? Thx
That's my shit wouldn't go in. That scream that holds the ignition switch was still there blocking me. Appreciate the help, brotha.
Great Video Fam!!
KQ Custom Thanks my brother 🤘🏾😎
Thanks Brother great video very helpful
Thx man really helped. 👍
How do you take the hazard switch out?
GOT A CUSTOMER FOR YOU NEEDING THIS DONE IN CLAYTON COUNTY, ASAP...
my switch is locked in the turn on position and always turned without the key..will this method still work.. I have an el Camino
jdmoore90 should but if it has no key I’m not sure
+Steve Davis ok preciate it..
Appreciate it. I lost my keys in a house fire and couldn't get a lock Smith to touch it
My 83 do the same thing turn on wit out the key in , would this also fix the car stalling out on me ?
ThatBoi David Key has nothing to do with the way it runs
Ok so I gotta change the ignition switch too then ? I had the alternator check since my battery will drain after a few starts and dies every time I slow down and idk what exactly it could be
@@SteveDavisCarGuy hey have any one y'all run to a problem where it just crank but no start battery draining out after a full charge getting fuel getting compression change out everything on the distributor new cap rotor ignition module ,the hei ignition coil but no start even change starter out but same problem grinding noise or slow start up after cranking on it Everytime any advice thanks
At 5:22 you mentioned not bending a part, what is that part called and what’s it do?
Zach V Deployed, soon as I get some free time I’ll watch it in the office and reply for you bro.
Aye no worries brother! got a 85 monte carlo that i had to switch out the cylinder for, vid helped out
@@SteveDavisCarGuy can u show how u got the peace of when u turned it off that's my problem u didn't show it if I see that I can do the rest
I know I’m late but I’m curious too, accidentally came out
lil broh keep doing your thang......keep them videos coming ...i need a little information on the remote start on the 88 box...
robb black Ok lmk, is it TBI?
Steve Davis no its a big carb...
robb black Ok you'll need an additional system that will prime the carb if not it won't work I can get you the info on it
Steve Davis thanks bro...
Steve Davis. What it need for that for ot can work
My ignition switch don't have no power when I turn it over do that mean I need a new ignition switch ?
No you have a different issue
Did u find out your problem I’m having same issue
@@balilabedrahim1734 yeah the wire that's running to my starter was broke just had to put another wire on it
Thank u
Mann I was wondering how to take that big silver piece off all day smh
Fuck bro your tools came from my job lmfao