not bad,.. im also from NYC and have an element,.. the yellow connect it to a wire that doesn't use direct electricity, or you will drain your battery...
A job well done! I see that you didn't bother trying to unbolt the two speed clips at the bottom of the bumper - these get hopelessly rusted up. Also, with the way you cut out only the disks, you can't access the alignment screw after installing. Look closely, there's a factory line in the inside at the top of the port that guides you to cut out a U-shaped piece to allow access to the alignment screws after installation is complete. th-cam.com/video/-pZ-8XxdpPw/w-d-xo.htmlsi=LHQe3MzsqNnJevNq However, if you only cut out the disks, you have the advantage of being able to remove the fog lights and glue the disks back in to restore the appearance of the bumper, effectively "reversing" the installation. I have a Honda OEM/NOS fog light kit and will consider only cutting out the disks as you have done.
Thanks for sharing, I’m gunna try setting mine up this week. where’d you get that cool grill cover from?
not bad,.. im also from NYC and have an element,.. the yellow connect it to a wire that doesn't use direct electricity, or you will drain your battery...
Use a switched live from the ignition, this will then turn off the lights when the key is removed.
Nice 👍🏽
Where was the light purchased? And does it still hold up?
How is it holding up
A job well done! I see that you didn't bother trying to unbolt the two speed clips at the bottom of the bumper - these get hopelessly rusted up. Also, with the way you cut out only the disks, you can't access the alignment screw after installing. Look closely, there's a factory line in the inside at the top of the port that guides you to cut out a U-shaped piece to allow access to the alignment screws after installation is complete. th-cam.com/video/-pZ-8XxdpPw/w-d-xo.htmlsi=LHQe3MzsqNnJevNq However, if you only cut out the disks, you have the advantage of being able to remove the fog lights and glue the disks back in to restore the appearance of the bumper, effectively "reversing" the installation. I have a Honda OEM/NOS fog light kit and will consider only cutting out the disks as you have done.
Please update us after it gets wet. I would love to know if this keeps the water out.
I have the same aftermarket fog lights & hate the water in them.
No water. It probably helped that I sealed the lenses
whats the verdict? any issues?
No issues! The second day there was a little bit of condensation but it went away and never came back
Any problem with that fog button light staying on 24/7?@@AlexKolipinski