I WAS LOOKING FOR A GREAT LOCK SMITH CHANNEL , I HOPE THERE ARE MORE VIDEOS ON AUTOMOTIVE KEY PROGRAMMING WE ENJOYED YOUR VIDEO HOPE TO SEE MORE !!!!!!
So I got a 2012 challenger rt and push button sometimes works and I have to push the remote function buttons a lot before it works and second fob does nothing. New fob batteries as well I’m stuck
Can u do that with a 2010 charger pursuit cop car? It has the keyed alike and the 8 slots in the win are all filled. I’ve got one key that starts the car gone but it’s falling apart and I need a spare with remotes that work?
@@locksny I agree but 2 dodge dealers and two locksmiths couldn’t. I ordered one of the pre programmed WIN with two fobs and installed it Friday and it works just only has about 20 ft range on the Chinese remotes I’m guessing . Thx for the reply
Hey i have the new win and new key it’s supposed to be preprogrammed to the vin from auto tech electronic would I still need to do whats done in this video and also would I be able to if the dash is not getting power in the run position only shows door ajar with the flashing security light
so if no dash when turning the key is there anyway someone able to program these things and could get the dash to work maybe it’s the security immobilizer or anti theft ?
im getting a security failure msg at the very end of the sequence. im using the xtool d8 . have you ever encountered that? new wcm will not program, yes i have entered the correct key.
Lets say I wanted to install a used win module in place of a bad one. I have 4 digit pin codes for both. The used one is plugged into truck and I click replace wcw in scanner. When it asks for pin code do I put in pin from used win ? Or must I erase data from used win module so I can enter original pin for truck ?
Is that win programmer linked into the OBD 2 pin connector??? Great video. I suppose thats an expensive tool. Are there any affordable programmers that are good quality for a reasonable price???
@@locksny Thank you. I've been using the $650 wonder WIN because I didn't know about the programming capabilities of some machines. Thanks for the info and great video...
I'm on my 3rd WIN module in my truck...these things are junk. I wanted to buy an AutoProPad so that I could program them myself, but was told they do not sell to public. Anyone have a solution for me?
@@locksny safes technologies change MUCH slower than auto. There's lots more auto jobs than safes but thats ok! I had planned on doing auto. I bought $15k of equipment...then covid hit and EVERYONE wants me to cut the keys they buy online...had pass! Lesson learned. Sold it ALL and now 100% auto free. I do still make boat and RV keys,and the yearly motorcycle too
I WAS LOOKING FOR A GREAT LOCK SMITH CHANNEL , I HOPE THERE ARE MORE VIDEOS ON AUTOMOTIVE KEY PROGRAMMING WE ENJOYED YOUR VIDEO HOPE TO SEE MORE !!!!!!
If you check my other videos I have a bunch of key programming videos.
Will this work the same way using the original keys and not new keys?
Does the scanner need to be connected to WiFi
Not all the time.
So I got a 2012 challenger rt and push button sometimes works and I have to push the remote function buttons a lot before it works and second fob does nothing. New fob batteries as well I’m stuck
Can u do that with a 2010 charger pursuit cop car? It has the keyed alike and the 8 slots in the win are all filled. I’ve got one key that starts the car gone but it’s falling apart and I need a spare with remotes that work?
You should be able to do all keys lost, erase them and add them back in.
@@locksny I agree but 2 dodge dealers and two locksmiths couldn’t. I ordered one of the pre programmed WIN with two fobs and installed it Friday and it works just only has about 20 ft range on the Chinese remotes I’m guessing . Thx for the reply
Curious of what model xtool you are using and if you’re familiar with the d7
Hey i have the new win and new key it’s supposed to be preprogrammed to the vin from auto tech electronic would I still need to do whats done in this video and also would I be able to if the dash is not getting power in the run position only shows door ajar with the flashing security light
You need your dash to power up, you may have more going on then the WIN.
so if no dash when turning the key is there anyway someone able to program these things and could get the dash to work maybe it’s the security immobilizer or anti theft ?
@@TayGotsCadillacs Have someone check the RF hub in back of the seats on the wall, you may find the plug greened up.
Ok I will look into sorry to mention it’s a Chrysler 300c but pretty much same problem
@@TayGotsCadillacs Definitely check your RF hub.
I put a new win module in myb2018 ram and it did start but now it is still doing the same thing it is because it needs to be programed
Can you use ur old key too ?
If you program it back in.
im getting a security failure msg at the very end of the sequence. im using the xtool d8 . have you ever encountered that? new wcm will not program, yes i have entered the correct key.
You may have a bad wire or a bad Gateway module. I have also never used the D8 programmer and have no idea if it can get the job done or not.
@@locksny thanks for the reply. its a brand new module, mabe il try to exchange it for another one
@@406life The Gateway module should be mounted on the back wall, in back of the seats if it's a Dodge Ram.
@@locksny is there any way to test the gateway module to see if its bad.
@@406life If you look the Gateway module, you may find a wire greened off or may be full of water. I'm not sure of a test for it.
Now is this good for 2021 dodge ram 1500 with the same classic style key like the one you just did or are thd pins pin numbers totally different.
They're all different.
@locksny I know the pins are different but do they use letters as well and are they more than 4 characters?
Lets say I wanted to install a used win module in place of a bad one. I have 4 digit pin codes for both. The used one is plugged into truck and I click replace wcw in scanner. When it asks for pin code do I put in pin from used win ? Or must I erase data from used win module so I can enter original pin for truck ?
I don't deal with used WIN modules, only new.
Is that win programmer linked into the OBD 2 pin connector??? Great video. I suppose thats an expensive tool. Are there any affordable programmers that are good quality for a reasonable price???
A couple grand.
Did the dealer program the VIN into that WIN module when you bought it??? Thanks.
No, just a brand new WIN in the box.
@@locksny Thank you. I've been using the $650 wonder WIN because I didn't know about the programming capabilities of some machines. Thanks for the info and great video...
@@User-bq4qm The OEM stuff works great and a lot less issues and they keep the factory PIN, not to mention WAY.. less money.
I'm on my 3rd WIN module in my truck...these things are junk. I wanted to buy an AutoProPad so that I could program them myself, but was told they do not sell to public. Anyone have a solution for me?
They are available to the public.
@@locksny do you know where I can buy one?
@@jfuqua72 Google it
Can you email to let me know what ineed to do
What version of autopad is that?
AutoProPad Full
Does it charge you a token for Module Replace? Thanks
No that machine.
Thank you brother for a great video 💪
Hey, thanks!! I TRY!! LOL I don't do ANY auto but still like watching it.
I don't like safe work these days but I still like watching someone else do it. Good job HKS 👍
@@locksny safes technologies change MUCH slower than auto. There's lots more auto jobs than safes but thats ok! I had planned on doing auto. I bought $15k of equipment...then covid hit and EVERYONE wants me to cut the keys they buy online...had pass! Lesson learned. Sold it ALL and now 100% auto free. I do still make boat and RV keys,and the yearly motorcycle too
@@hkssystemslocksafe2486 I still do safe work for my big accounts.
Thank you, good explanation
Glad you liked it