Man, you saved me quite a few steps! Another video I watched removed the exhaust header and a bunch of other stuff before getting to the starter itself! Thanks for posting this!🤠👍
I started not to watch because, as I’m sure you know, you have a pretty foul mouth. So I thought I’m just gonna hang in here and see what this cat knows.... You did a great job! You showed everything we needed to get the job done and gave simple, to the point instructions
I like the way you film this and did the voice-over looks great I've come across a few starter motors with three bolts it seems like you're working on the flat rate system we don't have that over here how does it work
I've watched a couple videos now. One eclipse, and this outlander. It was pretty much the same. These Mitsubishi largely the same? I have an 07 eclipse spyder, i suspect the starter is struggling a bit.
Thanks to all who forge the way on projects then to those who try to make it a bit easier. After looking at other vids and trying one myself today , you do not have to remove exhaust heat shield. I removed air cleaner box, the 2- 10mm bolts on the brackets for lower water hose and 1 trans hose. I pulled the radiator hose and zip tied it out of way, I undid the 4 bolts holding the trans fluid contraption and zip tied it pulling it up and close to the fan. the 4 10mm bolts on heat shield over starter are easy to get to.It wiggled out pretty easy. Starter bolts accessible, then wiggled starter nose down to get access to Power cables. Then twisted starter up and out.. Reversed directions and the hour and a half job done.
Hey Philip: I watch many vids on projects I'm starting. They all are for the most part very good. I then dive in. I'm older and do not vid. I tried but I rambled and it was very bad.. So I do try to add what I experienced to those that have forged the paths. Which I am very greatful for.
the model i have to do it on is horrible plastic intake with barely enough space to fit it through somehow i got the old one out but new one is identical but seems it wont fit back in doing my head in if i cant get it in i might have to just loosen the manifold by now if i did that straight away it would probably be in
Anybody know how to remove a 2009 outlander starter. Slightly less room than this one. Removed all bolts but there isn't enough room to pull out, its banging against the engine.
take out the throttle body intake and battery, and attack it from the top & bottom, i have to do it & that is what a mechanic at dealer told me to do, but he said he knows how to do it without taking out the throttle intake body, idk, i hate to take out the full intake plenum, you know what i mean
I got 2010 Outlander and I tried to remove mine but there is even less space then in your car so I had to give it to the shop. Could not get to it after 2 hours. Nightmare.
😂bro I was thinking this was going to be a nightmare. But after watching by his brother you the man . Sending love from Australia
Excellent brother, now I know, I was looking for this part yesterday on my sister's.
yes ..great format .. works really well thanks !
Thanks for the outstanding video. ❤
Man, you saved me quite a few steps! Another video I watched removed the exhaust header and a bunch of other stuff before getting to the starter itself! Thanks for posting this!🤠👍
Thank you for your video! I just needed to know where the starter is so i could tap on it with a hammer to get my car to start. :)
This is great just change my starter from watching this. Great job very informative
This is the best fucking, video on how to fucking replace your fucking starter!!!
😂😂😂hahah Typical shop talk FUK!!👊🏾👊🏾👊🏾
Love the commentary excellent work
Glad you showed how to replace the starter without taking off the damn manifolds. Now I'm ready. good look out
Awesome tutorial, man, thanks!!
Thanks. saved me a couple hundred.
+EJ Rivera Glad I can help! Thanks for watching
You're a legend, thanks heaps!
I need to do this on my uncle's 09 model, how different would it be? There's a £50 surcharge when you buy a new one if you don't hand in the old one.
I started not to watch because, as I’m sure you know, you have a pretty foul mouth. So I thought I’m just gonna hang in here and see what this cat knows....
You did a great job! You showed everything we needed to get the job done and gave simple, to the point instructions
Pretty tame language for a mechanic lol
I like the way you film this and did the voice-over looks great I've come across a few starter motors with three bolts it seems like you're working on the flat rate system we don't have that over here how does it work
I've watched a couple videos now. One eclipse, and this outlander. It was pretty much the same. These Mitsubishi largely the same? I have an 07 eclipse spyder, i suspect the starter is struggling a bit.
Kick ass man! Thanks! Got my thanks and my subscription!
Awesome video bruv thanks heaps!
Thanks to all who forge the way on projects then to those who try to make it a bit easier.
After looking at other vids and trying one myself today , you do not have to remove exhaust heat shield. I removed air cleaner box, the 2- 10mm bolts on the brackets for lower water hose and 1 trans hose. I pulled the radiator hose and zip tied it out of way, I undid the 4 bolts holding the trans fluid contraption and zip tied it pulling it up and close to the fan. the 4 10mm bolts on heat shield over starter are easy to get to.It wiggled out pretty easy. Starter bolts accessible, then wiggled starter nose down to get access to Power cables. Then twisted starter up and out.. Reversed directions and the hour and a half job done.
Bump
Not sure if trolling or stubborn
Can you please post link to your instructional video?
Or do you just post critical comments on others?
Hey Philip: I watch many vids on projects I'm starting. They all are for the most part very good. I then dive in. I'm older and do not vid. I tried but I rambled and it was very bad.. So I do try to add what I experienced to those that have forged the paths. Which I am very greatful for.
Great video! Thanks!
Thanks bro 👍🏼💪🏼
the model i have to do it on is horrible plastic intake with barely enough space to fit it through somehow i got the old one out but new one is identical but seems it wont fit back in doing my head in if i cant get it in i might have to just loosen the manifold by now if i did that straight away it would probably be in
you are legendary! thanks for this 😊
+Aliyah Marie Music No problem! Thanks for watching!
Cheers Brah!!!
Cool great help.
Thank you Soulja!
+kendrick jones Anytime bro!!! Thanks for watching!
I fix witchu boi I like ur style to this shit real talk
Thank you brother. Liked and subbed! Keep up the great work on your channel.
Helpful video but overloaded with unnecessary expletives.
Does anyone know if this might work for a 2009?
hey, you change the starter because of what?
thanks bud!!!!
Because it wont start?
Anybody know how to remove a 2009 outlander starter. Slightly less room than this one. Removed all bolts but there isn't enough room to pull out, its banging against the engine.
take out the throttle body intake and battery, and attack it from the top & bottom, i have to do it & that is what a mechanic at dealer told me to do, but he said he knows how to do it without taking out the throttle intake body, idk, i hate to take out the full intake plenum, you know what i mean
I got 2010 Outlander and I tried to remove mine but there is even less space then in your car so I had to give it to the shop. Could not get to it after 2 hours. Nightmare.
Very helpful, even though the talk is ghetto.
👍
Thanks, now i can fix this shit
Get someone to hold the camera or use a tripod!
Your video is too shaky! I'm gettting dizzy just watching it.
Fuck, that was so helpful, you are so fucking useful, I love ya... That's a lot. P.S Do you want to marry me.
Great "F"n video. except the language. can't use it for teaching our children. otherwise, good instructions.
It takes a hole lot of fucks to change a starter!
Speaking to fast. Bad light in the film. And please don`t move the camera so fast, when filming.
There is other words in the human English vocabulary other than the f word. Learn to talk.