Welcome back everyone! How are you all doing this week? Make sure to comment on which ring you would want from gthic.com for the giveaway as I’ll be picking one winner next week. The Marvel molds will be available for purchase soon as I’m working on getting them in stock. Enjoy and I’ll see you all next week! 👍🏻
I’ve noticed the same thing in my castings as well, I think it may have to do liquid zinc being slightly less viscous than a lot of other liquid metals. Pure zinc just fills molds perfectly it’s a joy to work with as long as you don’t overheat it 😅
I really like how the zinc came our. They look super clean with crisp definitions. The Mason ring is pretty nice. That's what I would choose if I were to win. Always enjoy the videos
The zinc ones are clean but the copper looks cool with the marks on them. Real trash to treasure. Plus the skulls rings are really cool. Would also enjoy seeing a pour of some type of sports theme. Great channel
Nice molds there mate, and the coins turned out great 👍 I have come to a mental block Kaitlin and I are getting married on the 17th and was thinking of casting her something but I can't seem to find the right something to cast! must get back to the old drawing board! and as always See you in the next video 👍⭐⭐⭐⭐⭐
ADAM I liked the copper coins over the zinc coins and that's a really hard choice to pick 1 of those rings cuz they are all BAD ASS RINGS. I'm torn from the Lord Of The Rings ring, the Eye ring, or the JASON MASK. Ok now it's TLOTR, or the EYE Ring. Ok TLOTR Ring wins lmfao. Sorry you had to read all that lol FANTASTIC WORK ADAM 👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦
Great video! I did my first copper coin pour this evening using molds from your shop- super pumped with how they turned out! I can't stop turning them over and around in my hand... 😎 For giveaway, if I were to win it would have to be the dead pirate captain. Super badass
You popping the can made me gonopen a sprite to enjoy with you. I've melted about 3000 sody pop cans so far! I've been saving them for ten years. I've made about 60 mini muffins with my homemade furnace. The weed torch doesn't get the furnace hot enough, because the mouth is too big to fit inside and i lose a lot of heat. The venturi burner i made doesn't work. I'll try a waste oil furnace next. I've gone through such asspain making versions that don't work, i could have bought a devil forge from the start and it would have been a wash lol. But it was fun learning.
I think the zinc Iron Man looked cool. If I could have any ring I would love the skull. The 4th row down and all the way to the right. I love all those rings !!
I enjoyed the new molds, though I always prefer the copper. The zinc is nice also. The zinc is always pretty and shiny. If I were to win something, I would prefer it to be the Templar masonic ring or the God of War Ares. Great video and awesome channel.
I like the color of the copper more but the zinc sure comes out of the molds pristine! I like the ring with the green stone the best:) (the power snake ring according to the site! Saw some cool earrings too!) Nice video! (The "whole" thing 😉 5:57 🤭)
I like the copper ones,but the zinc has that crisp look to it. As for the ring I like the Anubis ring in sterling. You should build a chest or a bank for All of your coins.
Those coins all look great 👍. The zinc looked like silver. Could the embossing be poured in copper and then the rest of the coin in zinc? 🤔 (or other combinations)
Nice coins man. I like the zinc ones best today. Good job. I like the black pearl pirates stainless steel ring on gthic the best. Thanks for a chance at the giveaway!
Always like the coin videos. I wonder if the fiber laser I have here would cut a good mold? I might have to get some graphite and give it a shot. As for the give away, I would be all over that Viking compass ring.
I like it when it gets to real heat and crazy metalls alloys and stuff.. casting plum, zinc or tin is like casting wax > I read that the Oldtimers transferred a shape or a Model in these metals cause they lasted longer than a wax model - thats what it is good for I guess 🤷🏼♂️
I'm going to start melting soon, going to order a devilforge this weekend. Any tips you can give me as a total beginner? Ive watched a ton of your videos and some of bigstackd but obviously i cant learn everything from that so any tips would be great :)
Hi Adam, awesome video as always! Although I was sad when you tossed the leftover copper pour on the ground, it was shaped like a heart. 🙃 You can put me in the drawing for the Flame Pattern Stainless Steel ring. Thank you very much!
Hi Adrock do you still use Borax as a flux or is it necessary. Help would be greatly appreciated. Love your videos I've seen all of them. I lived in Vegas for 20 years and feel for you in the heat trying to cast objects.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Welcome back everyone! How are you all doing this week? Make sure to comment on which ring you would want from gthic.com for the giveaway as I’ll be picking one winner next week. The Marvel molds will be available for purchase soon as I’m working on getting them in stock. Enjoy and I’ll see you all next week! 👍🏻
I didn't know that your a fellow masonic brother it's good to see you making awesome content
I love the masonic ring I want that one for my collection
Can I get the one with the emerald that was my favourite one
I like the one in the middle of the bottom row. I really like the captain America mold.
The Marine Corps ring is right up my alley! That is hot.
I’m really liking the RETRO SIMPLE PLAIN STAINLESS STEEL SQUARE RING it has a simple but nice look.
I like the copper coins but it pretty wild how the zinc comes out so clear right from the start👍
I like copper as a metal better, but the zinc coins look like cleaner casts.
I’ve noticed the same thing in my castings as well, I think it may have to do liquid zinc being slightly less viscous than a lot of other liquid metals. Pure zinc just fills molds perfectly it’s a joy to work with as long as you don’t overheat it 😅
I really like how the zinc came our.
They look super clean with crisp definitions.
The Mason ring is pretty nice. That's what I would choose if I were to win.
Always enjoy the videos
I know im late to the party with this, but i love how smooth the Zinc casts come out, Zinc really is a beautiful metal
Zinc pours so nicely. Gotta go with the zinc coins.
And I totally want that eye of Ra ring
The zinc seems to form to the molds better, I think. I always look forward to you and BigstackD's videos! The Freemason skull looks cool!
I start loving Zinc creatures. More and more.
The vintage cross skull ring looks amazing 4th row up 2nd from the left
the zinc looked great
Gotta admit that the zinc looks SO much better than the copper coins, especially the Captain America coins! Btw, really digging the skull ring.
I like the masonic ring that was center bottom
there is only ONE ring to choose! :) Love the zinc. casts so nice. but the copper .... love the color when it is polished up.
The Coins look Awesome! A hole in the bucket is still better than nothing. Great Job!
The zinc ones are clean but the copper looks cool with the marks on them. Real trash to treasure. Plus the skulls rings are really cool. Would also enjoy seeing a pour of some type of sports theme. Great channel
Love the way the zinc turns out. I’d have to go with one of the feathered skulls on the top row if I had a choice
These are fantastic. Love the marvel ones.
Nice molds there mate, and the coins turned out great 👍 I have come to a mental block Kaitlin and I are getting married on the 17th and was thinking of casting her something but I can't seem to find the right something to cast! must get back to the old drawing board! and as always See you in the next video 👍⭐⭐⭐⭐⭐
Love the new molds man they look great👍
If I had to pick a favorite casting, I guess I'd choose the zinc skulls.
They're all pretty awesome though, tbph. 😃
Liked them both copper and zinc thanks for sharing
And also i would like one with the jason hockey mask, i really like all the friday the 13th movies.
Dude! The Iron man coins are cool!!😎😎😎
the Nordic wheel of fortune on your ring i think would make a spectacular coin mold design.
ADAM I liked the copper coins over the zinc coins and that's a really hard choice to pick 1 of those rings cuz they are all BAD ASS RINGS. I'm torn from the Lord Of The Rings ring, the Eye ring, or the JASON MASK. Ok now it's TLOTR, or the EYE Ring. Ok TLOTR Ring wins lmfao. Sorry you had to read all that lol FANTASTIC WORK ADAM 👍😎🇨🇦👍😎🇨🇦👍😎🇨🇦
The copper stars are my favorite.
I really like the USMC EGA rings best
Love the look of the zinc coins! Nice and crisp looking. I would choose the Guardian Angel Templar Knight ring.
looks great zinc coins
Man!, that zinc makes such great-looking casts!
Not sure which ring I'd like if I win. Maybe, the hockey mask.
I like the Masonic ring! Great video as always!
Nice new molds, I like the Nordic God of War Skull Ring, but there are a lot of great ones
Looking good, Adam! I especially like the DogeCoin.
I like the zinc ones best. And i like anything to do with skulls.
The two piece Combined Hands Stainless Steel Skull Ring would be my choice.
Again, the coins look great.
But they all look so cool
I like the ring just above the Mason ring. Yet another awesome video my good man!!!
Love that puma ring (if it is a puma), the right most ring in the middle...very nice indeed
I like the tiger ring, yesterday I was listening to pandora and Gthic was the ad that came up. That was cool
Nice coins, I like the copper ones, and the evil goat ring was pretty cool
I like the Jade Lion Sterling Silver Auspicious Cloud Ring
I'd love one of The One Ring!
All the coins are awesome, but the zinc ones are probably my fav as the surface detail is so fine (:
zinc always comes out so shiny.
Looks great dude, keep it up.
Great video! I did my first copper coin pour this evening using molds from your shop- super pumped with how they turned out! I can't stop turning them over and around in my hand... 😎
For giveaway, if I were to win it would have to be the dead pirate captain. Super badass
Top class sir, the candy skull ring looks great.
I think they are all pretty cool
Beautiful castings!
The dogecoin cast was definitely my favorite. To the moon! lol
and I am eyeing that viking compass ring, it'd fit my heritage pretty well.
Thanks for another great video! All the coins look great! I can't choose one metal over the other. Well done!
They all look great 👍
From the sky I'd swear you were in Vegas. That little electric one is adorable. May have to see about getting one. ^.^ Thanks for show it at work!
He is in Vegas 😃
Mate the coins came out great 👍
Always love your videos. The all the skull rigs are amazing. Love the detail on them.
You popping the can made me gonopen a sprite to enjoy with you.
I've melted about 3000 sody pop cans so far! I've been saving them for ten years. I've made about 60 mini muffins with my homemade furnace.
The weed torch doesn't get the furnace hot enough, because the mouth is too big to fit inside and i lose a lot of heat. The venturi burner i made doesn't work. I'll try a waste oil furnace next.
I've gone through such asspain making versions that don't work, i could have bought a devil forge from the start and it would have been a wash lol. But it was fun learning.
They all look amazing!!! Great video buddy!
I love the smoothness that the zinc is giving. But I wonder is that because of the new melter that you are using for a more controlled temp?
I think the zinc Iron Man looked cool. If I could have any ring I would love the skull. The 4th row down and all the way to the right. I love all those rings !!
I enjoyed the new molds, though I always prefer the copper. The zinc is nice also. The zinc is always pretty and shiny. If I were to win something, I would prefer it to be the Templar masonic ring or the God of War Ares. Great video and awesome channel.
Im here coz of bigstackD ... Ur work is really good.
I like the ÆGISHJÁLMR STAINLESS STEEL VIKING RING alot.
Love those molds m8, very nice.
shaking hands...... nice molds
Definitely copper and its got to be iron man
Nicely done bro, those zinc one look freaking awesome, good job
I’d like the skull one I have a love for skulls and dragons
I like the color of the copper more but the zinc sure comes out of the molds pristine! I like the ring with the green stone the best:) (the power snake ring according to the site! Saw some cool earrings too!)
Nice video! (The "whole" thing 😉 5:57 🤭)
I like the copper ones,but the zinc has that crisp look to it. As for the ring I like the Anubis ring in sterling. You should build a chest or a bank for All of your coins.
I would like the maconic ring
Great video. If I were to win I would like the "EYE OF PROVIDENCE STAINLESS STEEL MASONIC RING"
If I am selected, I would like the Viking Compas ring please.
some awesome pours there bro nice one also great looking bars/coins well done :)
You have a lot of fun videos I watch even from Turkey
Great job, keep doing it
Those coins all look great 👍.
The zinc looked like silver.
Could the embossing be poured in copper and then the rest of the coin in zinc? 🤔
(or other combinations)
Nice coins man. I like the zinc ones best today. Good job.
I like the black pearl pirates stainless steel ring on gthic the best. Thanks for a chance at the giveaway!
Love them both...BUT...?? The zinc needed no shining up..they look awesome top work buddy 🍺😊👍☮️☯️🏴☠️ looking forward to next week's melt already...!!
Always like the coin videos. I wonder if the fiber laser I have here would cut a good mold? I might have to get some graphite and give it a shot. As for the give away, I would be all over that Viking compass ring.
All rings are awesome but i want ironman coin 😍
Love the vid mate, always look forward to watching them each week. I also really like the Jason Vorhees ring. 😀
Any update on the large ingot molds your buddy was making??
I like it when it gets to real heat and crazy metalls alloys and stuff.. casting plum, zinc or tin is like casting wax > I read that the Oldtimers transferred a shape or a Model in these metals cause they lasted longer than a wax model - thats what it is good for I guess 🤷🏼♂️
Ok! I looked at that site, and that eye or sauron ring was sooo damn dope! Wouldn't mind having that bad boy! GREAT video yet again! Thanks brother!
like them both
I'm going to start melting soon, going to order a devilforge this weekend. Any tips you can give me as a total beginner? Ive watched a ton of your videos and some of bigstackd but obviously i cant learn everything from that so any tips would be great :)
Thanks for sharing
Great vid by the way.
Great video and pours, thank you!
P.S. Are there any restrictions on the rings?
I saw a sterling silver cross ring that I liked but it cost $200?
i would like the jason vorhees one and your videos are amazing
The zinc look way better. The backs are smoother and it looks like the zinc picks up detail better.
That tree of life signet
Hi Adam, awesome video as always! Although I was sad when you tossed the leftover copper pour on the ground, it was shaped like a heart. 🙃
You can put me in the drawing for the Flame Pattern Stainless Steel ring. Thank you very much!
Hi Adrock do you still use Borax as a flux or is it necessary. Help would be greatly appreciated. Love your videos I've seen all of them. I lived in Vegas for 20 years and feel for you in the heat trying to cast objects.
Craftsman!!
The ONE Ring ( Sauron 's Ring ) 🧙♂️
Hi Friend: what size is that crucible? The one that u use for copper, A12 ? A hug from Argentina
When is it going to be Mrs Adrocks turn?? be interesting as to what designs ventures forth in the video :) :) :)
Old vaudeville song sung by hubby and wife called,,,,there’s a hole in the bucket dear Liza dear Liza, funny
The best for me is yggdrasil stainless steel viking signet ring.
I see you have several masonic rings. Are you a brother or just have the rings?