ฝัง
- เผยแพร่เมื่อ 10 พ.ค. 2020
- In this video I show you how to stop your microwave from beeping so loud. My microwave does not have a silent function so I was forced to get into it and take matters into my own hands.
Support the channel through my Patreon: / jrobling
Check out Merch on Amazon: www.amazon.com/shop/jrobling
or Teespring: teespring.com/stores/jrobling
Follow me on Twitter, Instagram, and Facebook
/ mrrobling
/ mrrobling
/ mrrobling
Check out every product that I review or I recommend in my videos here on amazon: www.amazon.com/shop/jrobling
My Gear:
Camera: amzn.to/36jsHBz
Phone: amzn.to/3oN0soe
Lens: amzn.to/3fXb9hT
Light kit: amzn.to/33q4zv4
LED lights: amzn.to/37kHsTV
Sound proofing: amzn.to/36eXvmK
Tripod: amzn.to/2J9txIp
Mini Tripod: amzn.to/3mjlSWa
Shotgun Mic: amzn.to/3qbL0jJ
Lav mic: amzn.to/3qbOB1 - แนวปฏิบัติและการใช้ชีวิต
I went through so many videos and long pressed every button on the microwave but still got no results. Finally came across this video that goes to the root of the cause, the vocal chords. I performed this surgery myself, opened it up and cut the vocal chord. The microwave will never beep again. Thank you.
Dude, you sound like Ryan Reynolds...
😂😂😂🤣🤣😂
🤣🤣🤣😂😂😂😂😂
Theres a guy thats a car reviewer that actually look and sound like Ryan Reynolds 😂 cant recall the channel name but... He has a Toyota Tacoma
After plugging in the microwave, pressing the dial, and realizing it worked... I then proceeded to dance with joy in the middle of my living room. Thank you. 10/10
I recently purchased a new countertop microwave. It had an annoying very loud five beeps. It was so annoying that I would stop the oven before the cooking time was up. I found your video, followed your instructions and now I have sweet, sweet silence! A Big Thank You from me and my family!
Had to chuckle at this because I also run to the microwave when my kids are sleeping to stop it at one second, feel like I’m disarming a bomb.
Thanks for the inspiration to solve the exact same problem. Mine beeps for a full minute when the time is up. It could drive me mad. Opened the back and there is the very same evil little component. I took my tiny pliers, gripped it round its neck, squeezes, twisted and pulled. It is now lying on the worktop well & truly dead. I am astonished that such a little component possessed the ability to put me in a bad frame of mind and cause to me to scream. But no more.
Love this guy’s personality 😂
Thank you for putting this out so I could sanity check myself before taking my microwave apart!
You guys should know all microwaves have capacitors that hold a lethal level of charge, even when unplugged
The danger level there? On par with being killed by chinese throwing star. Very Low!
It makes you wonder that the people designing microwaves actually think such loud beeping is what people want, it's so annoying and not desirable at all, thanks for this video
They also think black glass that can't see through is what people want.
@@customer5236 I assumed that was for safety (you know, with microwaves bouncing around the place)
@@2small4theMall I don't understand the claim to safety. That's what Japanese claim. I think they're just too lazy to fix their designs. It beeps only when pressing buttons and when food is done and it's switched off. Neither gives safety.
MICROWAVE SILENCE HAS BEEN ACHIEVED - PEACE REIGNETH ONCE AGAIN. THANK YOU FOR THIS POST! May the Lord bless you with a long life filled with happiness and good health AND A SILENT MICROWAVE!
A safety warning is pretty essential for this. The power should be disconnected before opening.
Thin the heard
If he ran it without the panels there could be an issue with the magnetron and microwaves, but since he's just pressing buttons there is no harm. However if anyone is not accustomed to tinkering or taking electronics apart they should definitely not do this at all.
That's not really important. Kind of formality.. As long as we are not starting a cycle, we are good.
As a matter of fact, to perform a audio test to identify the speaker, and performing the 'muffle' test, we DO need power to be ON.
IF somebody is too scared, or less confident, then dont try this.
It doesn't matter if it's plugged in. There is a capacitor in there that can kill a human being.
I could do it thanks to this tutorial :) and i am so relieved because that noise was killing me!
A bro handshake & hug , literallyi was seeing myself in your replies , specially when you said if something is there in microwave i am standing there , loved it - wonderful video
Now that's the ONE and ONLY video I found on youtube that teaches me to how to do 'vasectomy' of a microwave LOL.
Thanks a ton!!!
Thanks. This worked perfectly. My speaker looked a bit different. It was cylindrical with one hole in the end. I just pried it off the board with a flathead screwdriver. Problem solved. Silence is golden.
To shut off the loud repeating beeping noise of microwave oven ( Kitchen-Aid) , keep pressing the "2" button for 5 seconds (until you see GOOD displayed on the screen) . Worked for me !
When your microwaves on the wall😔
There's usually a built in mute
You legend! Cheers mate! You have just saved me from utter insanity! This works beautifully! Silence at long last! :D
Thank you SOOO much! And thank you to the other commenters who mentioned the inside is also high voltage even without being plugged in. The Emerson model I had, had the speaker facing the OTHER way so I couldn't even see it but I had an endoscope which allowed me to use a curved tooth scraper to get in there and remove the leads. SO HAPPY now I can run this thing without sound. Mine is from 2007 so I wasn't worried about it not working because it's already so old but this thing has worked flawlessly since I bought it new.
Thanks very much, I have been able to silent my annoying microwave thanks to this video.
Thank you! I followed your method on my GE model JES1145SH1SS manufactured June 2018, 950 watt microwave NOISEMAKER!!!!
The tweeter in mine has wires that were difficult to access but I reached in with a tiny screwdriver and pried them out.
And like a regular Torx screw is not security enough they gotta put in the ones you showed, Tamperproof Torx. Luckily I had a set of Tamperproof Torx Keys from the last electronic thing I "tampered" with. HA!
Sweet silence, works great. Now... about the neighbors yappy POS dog.
I'm surprised Deadpool didn't just smash the microwave and get a new one with a silent feature. All this complex haber dashery surgery is for the birds! 🎉🤣
I mean I guess you could waste $100
I killed my beeper also, now my wife can eat Indomie throughout the day and get even fatter without having to listen to my commentary.
Thanks! I just wanted to make sure it was ok to simply cut off one of the cables to the beeper/speaker. I silenced mine for good too! No more ANNOYING beeping! Bwahaha
thank you so much because my microwave doesn’t have clock settings so that you can do it with the 1 button is amazing
Crisis averted, thank you!!
Warning: may disable electronics in some microwaves. Did exactly what you suggest. However, in my GE microwave it changed the operation, and I can’t start the microwave anymore, despite the display working properly. Trying to figure out resistance of beeper and install appropriate resistor. Keep the fingers crossed.
Dude this was perfect, thank you
Oh yeah easy I’ll ask my mom on 4 in the morning if we have a screwdriver thanks 👍
💀💀 bro same
Thank you Sir, This helped me a lot.
Good job Sir.
Soul-crushing sound
So you make this sound too???
THANK YOU SO MUCH!
Thanks so much! That noise was driving me nuts!
One thing: Watch the fuck out when fumbling in electric machines that are plunged in.
Use rubber gloves, or you will learn it the hard way.
Got a nasty zap from a washing machine I tried to repair some time ago.
Since then, never with bare hands again, never got zapped again.
Legend, worked perfectly. Thank you!
my friend thanks for your help I did it no more beeps
Thank you!!!
Thank You!
💜 You have officially saved my life and my sanity… Thank you thank you thank you thank you thank you thank you thank you thank you thank you
Helpful video... Thank you.
good video.
Thank you for sharing this! It worked! I did it!
Thank you
Oh, I absolutely _hate_ that annoying speaker. It beeps every time I press a button, too. It's literally almost as loud as the smoke detector alarm.
I used to be around analog turn dial microwaves that make a nice DING when the microwave was done.
Ryan Reynolds?
Whos that lol
@@TruzTv dude that plays deadpool
@@pxnmalsg o lol
saaaame 🤣
Thancks
finally the vid I was looking for! Maybe it's a better solution for me to muffle it 60% with whatever works (maybe a resistor in series with the speaker,,fabric etc) vs completely mute it
thank you SO MUCH. god, I hate the beeping that this microwave does (I have the same one. it's a sucky microwave). also BE CAREFUL: unplug that bad boy before opening it up!!!
that piezo could make a cool guitar pickup.... 🤟😁🤟💯‼
The noise maker, speaker thing is officially called "Piezo Element" :) .. I tried every other hack, and no Joy
My microwave is VERY loud beeping, and if you push ANY number pad button it just starts cooking with that many minutes.
I plan to perform this surgery!! .. Thank You!!! And will report back :) (It's 3:40 AM right now)
thanks man i really love you it was a hell voice
The ultimate solution :)
True true. These things are annoying. Safety first😉. Thank you for the video.
This Emerson brand is same as Danby for us Canadians. I assume USA has same products.
All microwaves are made in the same factory in East Bongolesia.
I'm thinking of doing similar on my microwave. However I want to put a switch between the positive of the beeper, then put the switch on the side of the microwave so I can toggle it on and off. I think I might even put a three way switch so I could put a resistor on it to possibly make a mode for lower volume. I also want to put a switch on it to turn my turn table on and off as well because I have square plates that can't turn and it just spins around and sometimes causes havoc in there, lol.
Do RCA have this feature?
What are the tools called that fit non phillips head screws?
Security Torx
For now I have mine on a switch, and cut the power before zero. Like a charm. But I dont wanna have to track 1-3 minutes every trip.
Scalpel.......
How do you put it back to normal
Solder probably. Ideally then you cut that wire rather than pull it off. But I didn't have the patience, and I don't think it ever needs to be restored. Now after 2 years, try to silence yours.
I just disconnected wire on speaker
Dude we have the same microwave!!! 😳
I am not gonna become tony stark @ 3am just for some mozzarella sticks
but you have thought about it
leave it to deadpool to buy a microwave that matches his suit!!🤦♀️🤣
It is amazing what you can buy with a crisp high five
Lol remove the back panel that says ‘ if you remove this panel it will void your warranty ‘ 🤣
yeah, warranty are not worth the paper they are written on
That's a gamble worth taking. Though I once had a microwave go in under 1yr.. got it fixed under warranty and it lasted 10 years.
tryna make noodles and its 11
I need to do this, my samsung microwave beeps at around 190 dB 😂
MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM BEEP BEEP BEEP BEEP BEEP
I just stop it at one second left
me too but my husband can't figure out how I guess. 🙄
yeah,it's like pulling the ripcord 20m above the ground....best thrill ever!
Rip it off
I feel like this doesnt have to be a 5min long video
Yea but you know the norm would be 15 so not bad
Be more careful with electronics which are plugged in. Please.
Are you recommending people take apart their microwave? This is very very dangerous. I hope you’re willing to accept any sort of liability.
Yea,, The Few Thousand volt hit from Capacitor Will finally get him the voice he was looking for.
You've got to learn some way. And this is the internet, please don't turn it into kindergarten.