ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- How to Replace the timing belt and water pump (inc tensioner and idlers) on a 2001 Audi A4 1.9 PD TDI B5 Model AJM Engine Code.
Check out the diagnostic machine I use - diydaly.co.uk/...
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Check Euro Car parts (use discount codes on site) - tidd.ly/3b6f0bx
Check GSF Car parts - tidd.ly/34pZe7o (use discount codes on site)
Gates Timing belt kit & water pump eBay - ebay.us/iLLT8n
1.9 TDI timing pin Tool kit eBay - ebay.us/wD6vfZ
1.9 TDI timing pin Tool kit Amazon - amzn.to/3hpmp7C
Tools Used :
1/2” Dewalt impact driver - amzn.to/3e2Uff2
3/8 Drive Mini Impact driver - amzn.to/3iFCZ30
Socket set - amzn.to/3eGx2Ak
Ring Inspection Lamp - amzn.to/3gGWHcG
Torque Wrench - amzn.to/2VZ4CKu
Torx Socket set - amzn.to/39UTWCw
Triple Square sockets - ebay.us/NUu3Q1
Spanner set - amzn.to/2DlwUZm
Allen key set - amzn.to/2Dx12B2
Digital Torque wrench - amzn.to/34kpI9y
Screwdriver set - ebay.us/NUu3Q1
Spanner Set - amzn.to/389UOTk
Torque Settings :
Water pump bolts - 13NM
Timing belt Idler - 20NM
Timing belt tensioner - 20NM + 45 degrees
Cam pulley outer bolts - 25NM
Crank pulley bolts - 10NM + 90 degrees
Wheel bolts = 130 NM
Check out my other Vag group Videos : • VAG group
Check out my other timing belt videos : • Timing Belts & water p...
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. www.youtube.co...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay! - ยานยนต์และพาหนะ
![อยู่คนเดียวกับเขา - ส้ม มารี (Zom Marie) [Official MV]](http://i.ytimg.com/vi/gq1cWAIQDLg/mqdefault.jpg)
![Zahnriemen wechseln - Audi A4 2.0 TDI [TUTORIAL]](/img/n.gif)
Check Euro Car parts for stalk (use discount codes on site) - tidd.ly/3b6f0bx
Check GSF Car parts - tidd.ly/34pZe7o (use discount codes on site)
Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site)
Gates Timing belt kit & water pump eBay - ebay.us/iLLT8n
1.9 TDI timing pin Tool kit eBay - ebay.us/wD6vfZ
1.9 TDI timing pin Tool kit Amazon - amzn.to/3hpmp7C
Tools Used :
1/2” Dewalt impact driver - amzn.to/3e2Uff2
3/8 Drive Mini Impact driver - amzn.to/3iFCZ30
Socket set - amzn.to/3eGx2Ak
Ring Inspection Lamp - amzn.to/3gGWHcG
Torque Wrench - amzn.to/2VZ4CKu
Torx Socket set - amzn.to/39UTWCw
Triple Square sockets - ebay.us/NUu3Q1
Spanner set - amzn.to/2DlwUZm
Allen key set - amzn.to/2Dx12B2
Digital Torque wrench - amzn.to/34kpI9y
Screwdriver set - ebay.us/NUu3Q1
Spanner Set - amzn.to/389UOTk
Torque Settings :
Water pump bolts -
Timing belt Idler - 20NM
Timing belt tensioner - 20NM + 45 degrees
Cam pulley outer bolts - 25NM
Crank pulley bolts - 10NM + 90 degrees
Wheel bolts = 130 NM
Dude! I love you! But seriously, I've been looking for a vid like this for almost 2 months now!!! No one has the hydro adjuster. But this made my day! Tomorrow I fit my timing belt again!!!! Thanks again!!
Nice one! glad you like it! and hope you get it sorted 👍👌
Superb footage guys. Well documented, explained and saved me hours of swapping the belt on my A6 C5. Bumper removal was the only diff.
Glad it helped! thanks for the comment!👍👌😃
Thinking of doing the belt ony 02 Avant your videos made me feel more confident when the time comes 👍
Thanks for the comment , much appreciated 😁👌, yeah there not bad to do once the front end is out the way and you have good access 👍
Best timing belt replacement video on TH-cam. Saved me hours, thank you very much. Quick question, some kits come with the vibration damper, would you advise changing it? They seem very expensive for what they are. If I don't need to I won't bother!
Thanks !😃👍👍. yeah they are fairly expensive.. It is better to replace the damper.. I have done quite a few but have also done a good few without & never had one fail..
Thanks for the great video mate and step by step guide cheers 😀
No problem 👍
Thanks for sharing with good footage too. Great stuff chaps. :)
👍👍 thanks for the comment
Great video, thankyou ! also Hydraulic tensioners good to swap out at same time. They are not that durable.
👍👍
Vraiment super bien expliqué, je me lance. Merci
Thanks 👍
The timing belt tensionner is broken in 2 pièces. The engine was running with a Bad noise and the timing belt was ok.
Excuse my english and thanks you very much
Nice job! 👍
Thanks mate 👌👍
Do you need to replace the cam bolts or the HPFP bolts while you're there? Would you charge extra to do so?
I don’t usually replace them tbh mate
Amazing guide 💪 Is everything same on 1.9 TDI AVF?
Will be very similar
the aux belt tensioner is 16mm spanner. Try next time its a much better fit and makes the job way easier.
👍👍
Audi a4 b6 1.9tdi AWX is the same? Nice job bro congratulation 🥰🥰
👍👍👌
Great video guys, my B5 is on 218k Miles, so she's just run in.
Any chance of doing a video for the clutch? 😬
thanks for the comment! 😃 that B5 has got about 300k on it ha , the clutch pedal has been high for about the last 50k so keep expecting it to go! if it does ill definetly do a video 👍
@@diydaly Yeah mines developed a really bad judder in 1st when pulling away, I keep waiting for it to go to leave me stranded on a roundabout.
@@xsXex haha hopefully it'll hang on till ive done a video!
Did you move cranksaft clockvise or Anti clockvise to get that tool on position. I have same problem on my pd engine.
clockwise mate
Hi there nice job,i did mine about 1 year now,the one thing i' ve got a litlle bad was the cranckshaft blocking tool,the one i have does not align correctly with the treads in the poley, i think it was a bad tool,i got it from aliexpress ,unlike your that align perfectly,you can also measure the readings of the syncro angle with vcds to see if it is in range.
👍 yeah the cheap ones never seem to fit very well! experienced that first hand before lol
@@diydaly could you tell me witch tool you buy?
@@josecastro5857 sorry for the late reply! I’d use this kit mate ebay.us/wD6vfZ
@@diydaly thanks for the reply 🤙👍
@@josecastro5857 👍
Hi guy's thanks for the great video, just one question how many nm's for the bolts in the crankshaft pulley?
I may have it listed in the description , will try find out if not
When i do this, i lower the shock absorber all the way down on the car. Why? Thanks.
good vid and a thumbs up from me 👍 but how come you didn't change the old hydraulic tensioner
👍 I do most of the time tbh but didnt realise id ordered the kit without it
Very good video friend.
Can you tell me which is good and oe timing belt kit I should go for . 2006 skoda Octavia 1.9 tdi alh diesel 5 speed manual.
To be sure you’ll be best ringing a factor mate , or check out the links to euro car parts / car parts for less and you reg should narrow it down
Ok mate what about swinging front end out completely for more room ? Is that a case of undoing water pipes off passenger side top and bottom .
I’m thinking of swinging front end round towards drivers side resting on pallet ? If that makes sense
You should really need to tbh mate , there’s enough room to work round
Been doing my 2002 Passat TDi with this tensioner today. Have done them in the past but the new tensioner is giving me all sorts of problems. When I turn the tensioner with the 2 pin tool anti-clockwise and remove the locking tool from the plunger, the gap at that point is around 5mm. I cannot get it to compress any further. Comparing the Gates tensioner to the old VW one that I took off, the Gates one has a slightly longer end on the plunger and by default sits out further than the VW one.
In the workshop manual it says to go anti-clockwise, remove the locking tab then move the tensioner pulley slightly clockwise to get the 4mm gap. Will it be ok at 5mm?
And edit, I got it eventually sorted. The hydraulic tensioner was faulty. It wouldn't push back at all with pressure from the pulley arm, even after 30 minutes. Parts place replaced it and it's all sorted
Hi , today i changed my timing belt , water pump , pulley and when i turn the car on it was perfect at 800-1000RPM , but when i give it a bit of gas the timing belt makes a weird wistel noise , any tips? please
Maybe tensioned too tight
Hello, thanks for the video. I’ve made the same, same engine, same car…the crankshaft pulley tool also those 2-3mm was at right…so after that I took the old belt, camshaft has been fixed with tool, I have moved crankshaft pulley left so it fits. Just like you.
Now somehow the car has no power, turbo-boost comes first at 2500rpm, after some drive it goes in safe mode.
How was it by your car?
Thanks 🙋♂️
hmm sound odd, no issues with mine.. has it stored any fault codes?
@@diydaly thanks for answering. haven’t checked, but I’ve taken apart once the belt and rotated the crankshaft pulley to its old position where it was with old timing belt and now seems to be ok. I’ll do the scan anyway. Thanks 🙏
@@car.simplesurgeon5489 👍👍👌
What do you recommend a water pump with plastic or metal fins? Have the same engine code on VW Passat 2004
Doesn’t matter tbh just use a decent brand kit INA or gates
@@diydaly perfect. Just ordered the INA (complete) kit an hour ago. If you would've said metal I would be stressed rn 😂. But it just comes to maintenance if you change it at the right time it doesn't matter plastic or metal right? Btw would you recommend SKF?
skf are ok too.. I prefer gates or ina @@user-mq4tc4nw4r
I did the same procedure and my water pump is like making a whinig noise i hear that in this video too maybe they should do that
hmm should really so whine mate, if the belts too tight it may whine
Why's the 3rd cam gear bolt still loose ????
All 3 are torqued up .. It may look loose because you can see the threads?
Hi buddy .I done my golf mk4 today and used the correct tools but on completion the bottom lines up but the top hole is off by an hair thread the pin doesn’t go all the way through what should to do to correct this thanks tom
have you slackened the 3 bolt on the cam pulley
@@diydaly yes like they said in the video only
@@buddytom867 you might just need to repeat the tensioning procedure with slackening them again, I’ve had that trouble before.. is it just and just out?
@@diydaly the only thing is pinched the nut up on the tensioner and used the correct torque setting will I have to get a new nut or could I use thread lock?
@@buddytom867 no need for thread lock , you can just reuse the nut mate ,
Is this the same for a b5.5 Passat 2003
Depends on the engine code
Would this work for my audi a3 tdi 1.9tdi 55 reg. Its a single cam engine l don't know whether its a pd engine or what.
Will be slightly different mate , won’t have a hydro tensioner on the a3 , not sure when your planning on doing it but I’ll have a video coming up for the 1.9 tdi in the next few months .. I’ve got one to do on a golf or seat Leon with the same engine as yours in
@@diydaly please can you let you know .I am going to sunscribe your chanel now.
@@mumtazzafar1576 yeah ill let you know once ive done it mate
@@diydaly thnx
❤❤❤❤😂❤❤❤
Hi, is the 1.9 tdi AFN an interfering engine?
Yes it is mate
@@diydaly Thanks, I did a timing belt change a couple of days ago but ignored the ribbed belt. I took it for a spin and next you know the ribbed belt snapped and caused a lot of damage. It even wound up on the crank pully, causing the timing to slip 3 teeth or an inch or so. Could it have damaged the valves, you reckon?
@@Verschlimmbesserung are right 😬 yeah any more than 2 teeth and it’s likely to have done some damage but you never know , best just time it up and see 🤞🤞
@@diydaly Thanks, mate. I'll give you an update how it goes.
@@Verschlimmbesserung 👍
👍
Thanks mate 👍
use motor name. this is not afn