Rolled the ASV and got her stuck in a creek bed
ฝัง
- เผยแพร่เมื่อ 8 ก.ค. 2022
- We rolled the ASV and might have gotten her slightly stuck in a creek bed. We had to break out the 'ole Yankem Rope to help pull her out. Everyone is fine and the machine is okay.
Follow UBC
/ upstatebrushcontrol
/ upstatebrushcontrol
Merchandise
upstatebrushcontrol.square.site/
Amazon Store
www.amazon.com/shop/upstatebr...
Music
www.epidemicsound.com/referra... - ยานยนต์และพาหนะ
I've tipped by Kubota tractor twice in the thirty five years I've owned it, and the most vulnerable thing on the machine is the battery!! The acid drips out and causes a mess which you want to clean with a lot of water and baking soda ASAP!! Then you need to top up the battery with battery acid not just water. Also, once you wright the machine, let it sit for five or ten minutes to let fluid/oil get back to their normal areas. You wouldn't want to crank it, if oil got past the rings into the combustion chamber, as this could cause hydro-lock and bend a rod!! My Kubota has a compression release that prevents this.
God gives huge favors to His faithful servants every day. We just witnessed one just now!! Awesome job and your gift of common sense is amazing.
Fantastic recovery, praise the lord for that. Thank God it wasn't damaged. God bless you. Thank God no one was hurt.
Great job keeping your cool and accomplishing your mission. You have a great crew! Great leadership!
Sooo happy nobody was hurt ! Good call on how to rescue the machine . UBC crew steps for the owner and pull together for a wonderful save ! Well Done. Be safe.
Glad everyone (machine too) is ok!!! Poor Willie, its always embarrassing to make a mistake but things happen. Main thing is no one got hurt. Great team work getting it recovered.
Absolutely!!
I'm very happy that you got your machine out of that creek. However, I am thrilled that Willie was not hurt, and nobody got hurt in the rescue operation. Accidents happen, machines can be repaired or replaced. Human lives are much more precious. Big welcome to Dwight! It seems that he fits right in already!
I’m from the new school, all “accidents” now called “incidents” are avoidable if time and pre inspection is done to look for ant hazards. They got lucky.
John you have a very capable crew! When you have as many hours in the seat of different equipment like you guys things happen. Great job!! 👍👍👍
Yep, that a dilemma, but great recovery.
So glad Willie wasn't injured. I'm sure he feels really bad about the disruption.
Glad Jon kept his cool. Accidents happen. Great crew.
Blessings to all.....
So glad no one was hurt & Willie & machine are ok. Great job on recovery. Kudos to Yankem Rope.
Good recovery John ,,,, I am glad Willie wasn’t hurt and your machine isn’t hurt. God. Bless
This is part of the fun of working jobs like this. Glad it all turned out good.
Like your work, you guys do a great job. Way too much digging on your recovery. But all the same everyone was safe.
Nice recovery! Glad all is good. Also happy to see that again you showed that shit happens on the job and that you just adapt to the situation and overcome it. Great work!
Glad willie is ok,and you did a great job on the recovery.just check over the machine.good video 😎😎😎👍👍😢
Thankyou God for prayers of protection . My prayers are with you. Pls pls be safe at all times.Light an love to you all.
Well done, job done even with a smile on your face.....
Great job getting it out of the creek before it rained. But like like you said, it happens.
Great to see no one's hurt and no damage to the machine too 👍👍
Oh, no! Poor Willie! I am grateful he’s okay and the ASV came out with your great work. The dirt was so loose and soft which didn’t help. I know, in the past, I thought it almost happened but didn’t. Y’all have been so fortunate that this is a first. 🙏🏻
Good on you all getting that thing out. So glad that Willie wasn’t injured
Great job, you kept it all calm and collected.... Slow and Easy is the Fastest Way
Kept fingers crossed for you.
Awesome video thanks guy's it's just a good job it doesn't rain 🌧️🌧️🌧️😊🤫🚜🚛
Well you know that Willie feels bad enough. No speech needed. Glad everything and everyone is good. I'm really surprised on the no liquid leaks. Your extremely lucky all the way around on that deal. Hey, now at least you know that if it's ever turned on its side again.
If you never have anything go wrong that means you are not doing anything. Glad no one was hurt and got it out easily. 👍👍
Lucky again!!! - And a visibly relieved boss.
No one was hurt and no damage was done.
But please be more careful in the future.
Keep it up, I'm looking forward to the next video.
Greetings from Germany
Wow! Glad no one was hurt!.. Willie Is a good operator sometimes things happen unfortunately.. Hopefully ASV checks out well also..Again thank you God no one was hurt.. Y’all be safe.
Great job and I am sure your people appreciate your understanding. Sign of a great leader. Sh*t happens without an overreaction!!
I backed over an edge just like that and flipped over into a small pond I was digging. Never a fun situation. Glad Willie isn't hurt, and hopefully the machine will be okay too. Stay safe out there!
Well, that’s not good! Thank God Willie’s ok and was able to get out. You can always replace a machine but you can never replace a life. Hey sh** happens. It could have been worse. You’re a great boss Jon 😊
Great video and awesome attitude. I’m sure your guys must be so appreciative of that. You always seem to have a smile. Well done brother
Thank goodness no injuries. Recovery worked fine with little damage found. Big project being worked on - looks good.
You must have been upset about the accident but you kept your cool , minimal damage and most of all no injuries . Top job Jon . 👍👍🇬🇧
The joys of being a small business owner.
Glad nobody got hurt. Shows how tough the machine and mulched both are.
Great job recovering that machine! God bless.
Gods always watching out for us. So glad no one was hurt
Willie walked away. That's all that really matters.
Close call... Thank you for sharing very informative and educational,
Glad no one got hurt have a blessed day
One of your best videos. I never miss one. Great teamwork.
Thank you for the support! We appreciate it!
Wow! Glad Willie is ok! Great teamwork y’all! Upstate Brush Control Crew will ride again!!!
I’ve tipped my mini excavator twice and was more worried about hydro-lock than getting it upright.you guys were lucky today. Great video welcome Dwight! You’ve joined a fantastic team!
excellent job john you are the best
Another awesome job. Some amazing engineering going on. No job is impossible. Great video as usual. You have no idea how nice it is to see REAL MEN working hard together to get a job done. Looking forward to you next one! Much love from Southern California.
I hate to say this, but sure was more fun to watch than the usual mulching. Great crew, nobody got hurt, the machine works, and the outcome was wonderful. Thanks for videoing and sharing.
It full of suspense, happy no one got hurt, I watch you a lot and wondered if that ever happened, now I know.
Great team work to get it unstuck. Awesome video, thank you for sharing
Thanks for watching!
You guys are so awesome. You all work so well together!
Glad to hear no injuries, Nice recovery
I loved your attitude and that you kept praising the Lord! Glad your guys didn't get hurt and your machine is ok.
So glad everything went well
Thank goodness and glad no damage and no injury’s 🇺🇸💪
Damn.Glad Willie's ok! Perfect recovery John and crew!
Those footprints need to get photographed and turned into decals for the ASV! 🤣
Glad everyone was ok nice recovery
Never know when things can go sideways, Literally! That’s awesome it came out with no engine issues and everyone was ok!
Ha! Yeah, no one was hurt and the machine is fine.
Great Spanish John - " No bueno " Will have to get you down to Puerto Rico to help clear some jungle!! :)
Absolutely! haha!
Great team work. Just a lost day of production schedule, which is the same thing as a rain out, but as it was a work day, not much extra expense that I could tell.
You dodged one today. 👍
Awesome Gentlemen, Praise the Lord, Glad he’s safe
Glad it all worked out. If you're in that situation again it's probably best to let the machine sit upright for a day to let all the oil drain back to the oil pan. When on its side or upside down oil can get up in the cylinders and cause a hydrolock when you try to start it. That can cause catastrophic engine failure like a broken connecting rod or crankshaft. Got lucky all around on this one.
Nice video
Awesome recovery glad you got your machine out of the hole accidents do happen
Great video 🇺🇲
Glad you enjoyed it!
That's That - EVERYONE back to work now and this time will have to be made up! Seriously guys, GOTTA LOVE JON - I mean he not only carries the $ NOTE $ on all this equipment but he is such a great guy and has ENDLESS TRUST in all of you & FIRST there when one of you have a problem with that "SMILE" of his! OUTSTANDING!!!
Dang willie I wish you would have had the camera with you rolling as you were rolling!Just remember now the RT in RT 120 stands for real tippy! Tuck and roll tuck and roll my friend! All in a days work! Glad you and the machine are fine! 👍 Nice to meet you Dwight and welcome to the crew! 👋 Thanks for the video Team upstate!👋👍
Nice that it worked out. It's not really operator error, in that thick brush things can sneak up on you. Bad things happen to good people even when you are being cautious, work has to get done and Willie gets it done. Good to jump right back on that horse. Thanks for sharing even when things go wrong, it makes good lessons for us all.
Glad he's not hurt, I've watched Willie get a little aggressive or( comfortable) running the machine lately. Sometimes things like this happen to show us no matter how confident we get mistakes happen to humble us down. Willie I know you are young but take it from an older guy learn from this happening and never get so confident in your operating skills that you don't think about safety always.
Meh..
I’m glad nobody is hurt John some how machines can be fixed by is hard whenever comes to fix men.
Great job
Great save. Thanks for giving us different content. Ha
Dang, John, so glad that with all that happened not only the machine is ok, but that Willie is ok, and not hurt, though I bet he was a bit shaken up. I can just imagine the call you got..
Good recovery. That clay would be really good material to re-core the pond dam when it is rebuilt.
Good job man, to god be the glory.
Mowing Down Trees! Extreme Duty Brush Cutter
The Most Amazing Heavy-Duty Forestry Machinery
Great job troubleshooting, nice recovery! It’s always Something! Stay safe.
Love your videos and your oops good recovery
Thanks!
Yo!! Buddy in the mini x is MOVIN. Someone has a few hours on the sticks!!🤜🤛🏆🏆
Nice job guys
Nows a good time to get a mower for that mini x, Looks like most of it can mowed with the ASV and anything sketchy use the mini ex
Not surprised really, all lakes and ponds (if naturally fed) have a channel running down the middle.. Maybe a good time for a FECON head for the excavator? When you roll a machine you should wait about 60 minutes before starting it, you could really damage the engine due to hydro lock, oil will get above the pistons...
I am a bit surprised, no spill pads booms in the creek. Where I live that would be a nightmare. Thank you and have a good day.
Praise the Lord for sure. Nice recovery boys.
I live in the upstate myself! Subscribed!
Thanks for subscribing! We appreciate the support!
Glad that worked out, good job.
Great job. Glad no one was hurt, machine will be good as new with a new hose,.welcome to Dwight, love that yank m rope! Great video. Good job guys.
Close call! Glad all went well!
Nicely done and no one got hurt.
I missed this video somehow and just not seeing it, man glad no one got hurt with this one. I know that sucked to see your machine down like that. I am sure accidents can happen. That has always been my fear of ending up in our creek while on one of the machines we have.
I'm going to need a play by play from Willie hahaha
Dang son. Glad he is okay!
glad mine is sold, life is so much easier and simplier
Good job you made it look so easy !!!
Thank you!
Wow. He’s blessed to not be hurt. You can replace machines but you can’t replace a human life. It’s refreshing to see an owner not get furious or vindictive when something goes wrong. You let Christ shine through. God bless. They need to get letsdig18 to fix the pond dam. He really knows what he’s doing and does the job right.
Congratulations John on a great save both to the pocket book and equipment.
Oh, oh, this is not good. It's a new to heap up Eard Ground and the Mulcher is together with the Eard to fall down. Your have very good Workt and the Mulcher against on firm Ground to bring. I hope the Machine is not to damage. Greeting 👍👌🇦🇹
Oh Wow, I’ve never seen anyone turn over skid steer over . Good thing you have the equipment to make it right. Then getter her done.
nice recovery :)
Well done John 🙏🙏🙏