Instead of abs boards, you can also use those plastic cutting boards from the dollar store. I have used it before and made a bracket for my fuse block and it worked.
For my vehicle I didn’t need the dsp cause I don’t have the factory amplifier. Is more money and more materials needed if you want to run a dsp. Sorry for the late reply!
If you’re going to run dsp this is the amp you will need. It works great with the replacement of stock amps www.sonicelectronix.com/item-149211-Axxess-AX-DSP-HON1-Wiring-Harness.html?PLA&gclid=Cj0KCQjwk96lBhDHARIsAEKO4xYaZnguBsee0RBVjcP_hJEgtsoq7gMRJ-GEZ7_94YjT--l5FJ0u068aAkchEALw_wcB
@@BillioneaR16 just remember if you have the stock amp. You will need a dsp. But if you don’t, don’t worry about that small wire set up in the middle of that harness. Just connect the two on the exterior of the harness
@@papihennygarage just for confirmation it works with 2017-2022 ex trims? Reason for asking its says does not fit that trim on the website. New subscriber..
![CAMPปลิ้น | EP.83[2/2] ประสบการณ์ขนหัวลุกจากตำนานวงการผี!](http://i.ytimg.com/vi/T_kFecQw7Ds/mqdefault.jpg)
Instead of abs boards, you can also use those plastic cutting boards from the dollar store. I have used it before and made a bracket for my fuse block and it worked.
We put a system in my 2020 & now i have no radio. No head unit whatsoever.
Any suggestions?
Thanks
D.
Nice whip. Good job
Just bought a 2020 touring and its amplified. Havent found anything yet to by pass amp. I was thinking of using my jl audio fix 86 dsp.
Go on crutchfield they have multiple by-pass wiring harness for that amp.
What t harness did you use? Crutchfield didn't have anything for mine.
I got the LOC from kicker $20 will it work with the 2018 crv ex?
Anything can work with any vehicle. Just depends on the set up and style you’re going for. But yes that works!
thanks for the video. qq . a dsp is not needed to tune the factory eq ?
For my vehicle I didn’t need the dsp cause I don’t have the factory amplifier. Is more money and more materials needed if you want to run a dsp.
Sorry for the late reply!
If you’re going to run dsp this is the amp you will need. It works great with the replacement of stock amps
www.sonicelectronix.com/item-149211-Axxess-AX-DSP-HON1-Wiring-Harness.html?PLA&gclid=Cj0KCQjwk96lBhDHARIsAEKO4xYaZnguBsee0RBVjcP_hJEgtsoq7gMRJ-GEZ7_94YjT--l5FJ0u068aAkchEALw_wcB
That rx7 tho!
Hey did use an external battery or oem battery?
I used an oem battery.
What color is this crv
@@djperry23 is sonic gray
What harness did you use to connect the lci7
www.sonicelectronix.com/item-149211-Axxess-AX-DSP-HON1-Wiring-Harness.html?PLA&gclid=Cj0KCQjwk96lBhDHARIsAEKO4xYaZnguBsee0RBVjcP_hJEgtsoq7gMRJ-GEZ7_94YjT--l5FJ0u068aAkchEALw_wcB
That’s the harness I used connect the door speakers from the back of the radio to the lci7
@@papihennygarage appreciate you man!
@@BillioneaR16 just remember if you have the stock amp. You will need a dsp. But if you don’t, don’t worry about that small wire set up in the middle of that harness. Just connect the two on the exterior of the harness
@@papihennygarage just for confirmation it works with 2017-2022 ex trims? Reason for asking its says does not fit that trim on the website. New subscriber..
Lol.
Are you in Ohio?
Help
Bro can u install in my car too?
Where are you located?