Great video. I live in Mexico and I am doing the same as you. But the car is Tesla M 3 2020, is almost not reconocible. Can you tell us how do you reset the Restraint Airbag control Module.? Set by step. Thanks so much.
thank for video.i bought salvaged tesla 3 also ,rear right suspension was changed completely.car is not going in driving or reverse or neutral. two airbags right seat and right roof also blown.they are not yet changed .do u think this is reason for not getting into drive mode
Im about to start working on a crashed model y the steering and under knee airbags have blown and the drivers seatbelt wont retract. Since it wont move i was thinking to replace the pyro fuse first to try and move it from where it was dropped off. Im wondering if i replace pyro fuse and the airbags havent been replaced first will i blow the new pyro fuse ?
I just purchase a totaled 2021 Model 3. It was hit in the front end. Air bags were deployed. Your video's will be very helpful as I dig into mine. I am curious how you were able to get parts from Tesla. It looks like you were able to get the front crash/crumble structure parts. They looked new. I believe those are restricted. I filled out the parts application and even got a resale number. Will I be able to buy parts from Tesla or only non-restricted ones? Question 2: When getting ready to see if my Tesla will move what repairs will I need to complete before trying it? SRS model (I can get repaired), Air bags, Pyro Fuse. Do each of those need to be complete before testing it will move on its own power or can some be done afterwards? Do all the crash modules need to be plugged in? How do you know if they are bad? Also where is the best place to get a hood? From Tesla or Ebay? Thanks, Tayne
As far as parts you have to talk to your local Tesla service center it will pretty much depend on them. And as far as starting the car I would make sure everything electrical is installed, things like sensors, cameras all the wiring
hi i tying to buy tesla from copra auction .its has rear collision ,but all airbags are intact but front seat belts got locked ,u think car will drive even with locked seat belts.i ll replace seatbelts later, but if u can tell me will it still drive with seatbelts locked
Are you planning on doing a video cleaning up the interior? Or taking it to a detailer? I assume it was left open at the insurance auction or whatever that let all that moisture in
Great video. I'm working on 2021 model Y (airbags deployed too), did you have to disable, unplug any safety fuses before safely working on your model 3 ? Thanks.
@@enriquecaloca5502 assuming you tested fuse before you installed it. I would make sure everything connected, electrically. Make sure coolant is full. Sorry that’s all I can think of.
I got a 2018 m3 airbags deployed I change the otro fuse and still the same it says it will shut down and also will not go into drive do you have any suggestions?? I really appreciate it
@@enriquecaloca5502 assuming you tested fuse before you installed it. I would make sure everything connected, electrically. Make sure coolant is full. Sorry that’s all I can think of.
I am not a certified Tesla technician, But I can tell from my experience that yes you can install Airbags later just have to make sure car is completely powered down.
Hi there, I have found your videos very helpful! Is there a way I may contact you regarding a small rebuild I am doing of a 2021 Model 3? Call? Email? Text?
![[EN] Pyrotechnic fuse replacement on a Tesla Model S | Masters of Motion](http://i.ytimg.com/vi/nosz4Miz-yk/mqdefault.jpg)
![[EN] Pyrotechnic fuse replacement on a Tesla Model S | Masters of Motion](/img/tr.png)
![[FINALE] มีคนคิดแค้นลักพาตัวเด็กไป🔪หญิงชราใช้ชีวิตตัวเองเข้าแลก👩🦳 #โลกการละคร](http://i.ytimg.com/vi/C_BPHPoZFOg/mqdefault.jpg)
Great video. I live in Mexico and I am doing the same as you. But the car is Tesla M 3 2020, is almost not reconocible. Can you tell us how do you reset the Restraint Airbag control Module.? Set by step. Thanks so much.
Please post a link to the video in your channel where you talk about the special must have key. Thanks in advance
Just posted
so how did you fix srs module? replace or fix and if so where did u get it and did tesla have to program?
I do module reset locally. No Tesla didn’t have to program after reset.
thank for video.i bought salvaged tesla 3 also ,rear right suspension was changed completely.car is not going in driving or reverse or neutral. two airbags right seat and right roof also blown.they are not yet changed .do u think this is reason for not getting into drive mode
Mine would not drive until pyro was replaced
Im about to start working on a crashed model y the steering and under knee airbags have blown and the drivers seatbelt wont retract. Since it wont move i was thinking to replace the pyro fuse first to try and move it from where it was dropped off. Im wondering if i replace pyro fuse and the airbags havent been replaced first will i blow the new pyro fuse ?
In theory it shouldn’t, but I would try assemble and replace all electrical components before changing Pyro
I just purchase a totaled 2021 Model 3. It was hit in the front end. Air bags were deployed. Your video's will be very helpful as I dig into mine. I am curious how you were able to get parts from Tesla. It looks like you were able to get the front crash/crumble structure parts. They looked new. I believe those are restricted. I filled out the parts application and even got a resale number. Will I be able to buy parts from Tesla or only non-restricted ones?
Question 2: When getting ready to see if my Tesla will move what repairs will I need to complete before trying it? SRS model (I can get repaired), Air bags, Pyro Fuse. Do each of those need to be complete before testing it will move on its own power or can some be done afterwards? Do all the crash modules need to be plugged in? How do you know if they are bad? Also where is the best place to get a hood? From Tesla or Ebay?
Thanks,
Tayne
As far as parts you have to talk to your local Tesla service center it will pretty much depend on them. And as far as starting the car I would make sure everything electrical is installed, things like sensors, cameras all the wiring
@@akindiyrebuilds6223 Thanks for your reply and your videos.
Hello amazing job. I have a question what is the cost of pyro fuse ?
I bought mine about two years ago for $17
Thanks for answer 🙂
Hi Great video really help full I need a help regarding Tesla model 3 2020 ??
hi
i tying to buy tesla from copra auction .its has rear collision ,but all airbags are intact but front seat belts got locked ,u think car will drive even with locked seat belts.i ll replace seatbelts later, but if u can tell me will it still drive with seatbelts locked
I haven’t tried driving mine without seatbelts, but I’m pretty sure it will run
@@akindiyrebuilds6223 thanks for quick reply , auction is coming tomorrow. I ll try to bid on it thanks again
Are you planning on doing a video cleaning up the interior? Or taking it to a detailer? I assume it was left open at the insurance auction or whatever that let all that moisture in
That’s the result from sitting in my garage for two years
Great video. I'm working on 2021 model Y (airbags deployed too), did you have to disable, unplug any safety fuses before safely working on your model 3 ? Thanks.
If your airbags were deployed then your pyro refuse should be blown
@@akindiyrebuilds6223 I replace the pyro fuse but I still don’t get it to charge or move only shows P on dash any ideas??
@@enriquecaloca5502 assuming you tested fuse before you installed it. I would make sure everything connected, electrically. Make sure coolant is full. Sorry that’s all I can think of.
@@enriquecaloca5502I’m facing the same issue I replaced the pyrofuse car won’t go into drive, did you figure what the problem was?
@@AfgSamimMods did you ever find issue?
good 👍👍👍
hey akin i just bough a 2020 m3 the airbags deployed too is that can cause the car wont go to drive
Yes your pyro most likely blown
I got a 2018 m3 airbags deployed I change the otro fuse and still the same it says it will shut down and also will not go into drive do you have any suggestions?? I really appreciate it
@@enriquecaloca5502 assuming you tested fuse before you installed it. I would make sure everything connected, electrically. Make sure coolant is full. Sorry that’s all I can think of.
Same problem did you maybe find a solution, pyro fuse replaced but vehicle won’t do anything
I realized that your email is on your home page and have since emailed you. Looking forward to your reply. Thanks in advance
Can I change the pyrofuse before installing new airbags?
I am not a certified Tesla technician, But I can tell from my experience that yes you can install Airbags later just have to make sure car is completely powered down.
@@akindiyrebuilds6223 okay thank you
Hi there, I have found your videos very helpful! Is there a way I may contact you regarding a small rebuild I am doing of a 2021 Model 3? Call? Email? Text?
Just post your questions here and I’ll try to answer if I do know the answer.