That very well put together chassis with a nice classic body on top is exactly what you need for the rest of your life! Thats what I would like to do to my still fairly original 50 Special Sedanet! American classics are just a lot cooler with that 'Hot Rod' touch put in to it!
I have a 93 Ford E150 Club Wagon Van 5.8L. The body is in really good shape. Would you happen to know what pick up truck I can get used,cheap,that I can have the body of my van,put on the trucks chassis without MAJOR issues.?
Do you accept requests getting the fuel lines and or other plumbing lines all done in AN? And what's the serviceablety like having the lines in through the chassis?
Curious if you do 4x4 frames as well... I'm sure probably not as big a market for them, but suppose you had or need a frame for 89 ford f150 or a 95 chevy Z71 that needs a complete rolling frame , ready to sit a body on... I'm sure your shop can do this, just wondering what one would look like and how much of a challenge that be... And even though I would never be able to afford this... I'm sure someone has truck body 4x4 that's in excellent shape but the frame and suspension are completely shot.
Nice chassis, but for that price you can get an art morrison or roadster shop chassis and set of 4 wheels. Sometimes I feel that people don't know that if you sell a product cheaper, your market is bigger
Cheaper is cheaper. We aren’t racing down to the bottom to compete with those driven by being the cheapest. We are producing a high quality product with all the upgrades. Not tempting people with low prices and quality intro products.
And how much money does a chassis cost as it is in the video with the engine, transmission, suspension, everything as it is in the video, how much is it worth up to that point?
Jason, SWEET RIDE! I was curious on that chassis setup, does the transmission tunnel have to be modified to handle the 10R80? It looks high in the chassis, not sure the stock cover would work? Also, who are you folks using for the drive shaft?
I don't need a lottery but it will never be a ford or any american. Traditional minimum standards had been japanese followed by german of year 2014 as maximum. Nothing lesser than those. For the same money, don't buy - make yourself look stupid (bias-prejudice bigot-racist illogical-emotional womenly)
I would like to see how much this cost. I’m about to sell one of my houses and wondering if I can do a 32 highboy. I need a little longer in the cab in a little bit in the body. Looking at a steel body. Just trying to convince a potential buy for a junked 1932. I just need the title and vin#.
Test of concept = ford (for left hand drive market) = ford (for right hand drive market) = chevy (korean market.?) Engine size, gauge, to localise for those markets (existing spares in their environment) Bolt-nuts, wire, hoses, interior, ... 3 markets localisation with spaces and gauges. Panelling not-included. Kit - CKD without panels.
Y'all should give one away to advertise. I will be honered. Send it to, "Save the Brandon Foundation" Then I will allow you to tour my truck around the country for SEMA and other car shows. Thanks in advance.
Only Rich people can afford something like this. I can only dream of having a setup like this for my f100 I only make 35000 a year plus living in California makes it even harder 😔
@@FatFenderGarage 75k-ish is with the whipple and drivetrain then? (meaning more or less than what's been featured in the video..minus the wheels/tires maybe?)
Super impressive, fantastic looking setup. Game changer for the Ford market.
That is crisp and F**k’n clean 💯
It’s so beautiful. I wouldn’t even want to drive it and risk getting it dirty
That's awesome - great stuff here, Jason!!
Really nice piece of kit! Curious, how are the fuel and brake lines supported within the chassis rails?
I’m half tempted to do a helcat swap in my Ford F150 with Cadillac taillights.
Have the big 3 under one roof. Never seen it.
That’s amazing! We’ll be in touch! Haha
What an awesome job!
That very well put together chassis with a nice classic body on top is exactly what you need for the rest of your life!
Thats what I would like to do to my still fairly original 50 Special Sedanet! American classics are just a lot cooler with that 'Hot Rod' touch put in to it!
That's a beautiful blue truck
Would love to set a 61 unibody on a chassis like this.
Nice how much for a 2017 ls 1500 Silverado single cab powder coated for airbags
I would just push that in my living room and be happy looking at it every day
Should be in every man's living room...
For real lol screw a tv, I wanna tinker and gander
F that. In my bedroom. Ill take the bed out!
Wow holy moly, I want this. Is that other video published already? Taking this chasis and building on top of it?
That is clean AF
Does your rolling frame's come with a VIN and MSO so I can title and plate it here in AZ
I have a 93 Ford E150 Club Wagon Van 5.8L. The body is in really good shape. Would you happen to know what pick up truck I can get used,cheap,that I can have the body of my van,put on the trucks chassis without MAJOR issues.?
Do you accept requests getting the fuel lines and or other plumbing lines all done in AN? And what's the serviceablety like having the lines in through the chassis?
“Welding an exhaust on” with a
V-Band would be interesting but great looking chassis!
Build a Toyota Tacoma chassis…. Please!
Can this be order for and 03-06 gmc?
I would like to know if it can be used as a daily driver without severe corrosion of the frame?.. .
I love your content guys - but it doesn't hurt to share the cost of this complete chassis ? - 30 / 40 K ?
It would probably kill the average guys dream 💭 that motor&trans is 25-30k chassis 15k wheels 🛞 7k or more 6piston big brake 6k
Chassis starts at 24k to 75k. Full whipple supercharged drivetrain. We even started it prior to shipping.
Exhaust ran underneath the rear axle? Seems like a scrub point, is it a custom kit from FFG or purchased?
Do they do trucks without selling the motor and just a chassis
Yep
The project I'm going for would need a long straight flat chassis and would definetly need to be lifted about 3 1/2 feet and have 4x4.
Do a story on the beautiful blue 55.
Remember when hotrods were all self-built so working class guys could afford cool and fast cars?
You must be retarded, it's ok.
Cheer~~~the base frame of a motor vehicle or other wheeled conveyance.😊
Hmm! So a budget of 15 to 20 k can’t get me a Chasis and coyote then. Looks good guys love the builds.
😂😢 , WAS considering one for a 65 without the wipple, BUT looks like I will pass with those prices
Chassis starts at 24k to 75k. Full whipple supercharged drivetrain. We even started it prior to shipping.
Curious if you do 4x4 frames as well... I'm sure probably not as big a market for them, but suppose you had or need a frame for 89 ford f150 or a 95 chevy Z71 that needs a complete rolling frame , ready to sit a body on... I'm sure your shop can do this, just wondering what one would look like and how much of a challenge that be... And even though I would never be able to afford this... I'm sure someone has truck body 4x4 that's in excellent shape but the frame and suspension are completely shot.
We have 2- 4x4 frames coming out in a couple weeks.
I been really thinking about getting a chassis for my 90 bronco
Man thats nice looking!!
Nice chassis, but for that price you can get an art morrison or roadster shop chassis and set of 4 wheels. Sometimes I feel that people don't know that if you sell a product cheaper, your market is bigger
Cheaper is cheaper. We aren’t racing down to the bottom to compete with those driven by being the cheapest. We are producing a high quality product with all the upgrades. Not tempting people with low prices and quality intro products.
And how much money does a chassis cost as it is in the video with the engine, transmission, suspension, everything as it is in the video, how much is it worth up to that point?
Do you guys have a torque arm option?
Can you get them set up for 4x4?
We can
how much can it tow?
Can you guys get coyote swap in 1996 f150 that can pass california smog?
Jason, SWEET RIDE!
I was curious on that chassis setup, does the transmission tunnel have to be modified to handle the 10R80? It looks high in the chassis, not sure the stock cover would work? Also, who are you folks using for the drive shaft?
No modifications usually at all. We use a local shop called AZ Driveshaft
Do you build complete trucks
How much would this cost for full set up ?
Just needs a seat and a steering wheel. Its perfect
I am Cal Worthington, and this is my dog spot
If I won the lottery....
one of those chassis with 79 bronco body! Painted gold!
So true, was thinking the same.
I don't need a lottery but it will never be a ford or any american. Traditional minimum standards had been japanese followed by german of year 2014 as maximum. Nothing lesser than those. For the same money, don't buy - make yourself look stupid (bias-prejudice bigot-racist illogical-emotional womenly)
wheres the follow up to this? how quick to do the swap with chassis next to truck.
I would like to see how much this cost. I’m about to sell one of my houses and wondering if I can do a 32 highboy. I need a little longer in the cab in a little bit in the body. Looking at a steel body. Just trying to convince a potential buy for a junked 1932. I just need the title and vin#.
Não entendi, trabalham ou não com pickup chevy (1955)? 🤔😊👍
How do I get a truck to you guys? I have a few questions
Out of my budget my a lottery win will help
And what’s the cost on this build ?
Would be nice to have some type of raffle for these builds for us poor people to have a chance at getting this done.
How much does this chassis cost?
How much does something like this cost im interested
Chassis starts at 24k to 75k. Full whipple supercharged drivetrain. We even started it prior to shipping.
Can this be done with a rear IRS?
Absolutely
price?
Test of concept
= ford (for left hand drive market)
= ford (for right hand drive market)
= chevy (korean market.?)
Engine size, gauge, to localise for those markets (existing spares in their environment)
Bolt-nuts, wire, hoses, interior, ... 3 markets localisation with spaces and gauges.
Panelling not-included. Kit - CKD without panels.
American vehicles accepted by china-mongoloids and taiwanese. Many other nations reject such bang-for-buck ratios..
Com'on guys, use a rear set engine with at least a V8 engine plus a 50-50 weight balance or even 48-52 !!!!!!!!!!
How about for a 1948 Plymouth Coupe?
If you can get us the vehicle here, we can build a chassis for it.
Y'all should give one away to advertise. I will be honered.
Send it to, "Save the Brandon Foundation"
Then I will allow you to tour my truck around the country for SEMA and other car shows.
Thanks in advance.
I would buy a no limit chassis if I was dropping this kind of money !
It’s very different and engineered to be that way. Ride quality is incredible
Only Rich people can afford something like this. I can only dream of having a setup like this for my f100 I only make 35000 a year plus living in California makes it even harder 😔
Parabéns!.
How much? Ballpark?
Chassis starts at 24k to 75k. Full whipple supercharged drivetrain. We even started it prior to shipping.
@@FatFenderGarage 75k-ish is with the whipple and drivetrain then? (meaning more or less than what's been featured in the video..minus the wheels/tires maybe?)
I learned a lot today. Thanks, very informative, truly skilled craftsmanship. Well done guys! 👍🏻👍🏻👍🏻
How about a chassis for dodge 1950 to 1957 truck or
Of course.
first
Nice one!
Ahhhh fuck ford guys .. buy Chevrolet if you want quality / reliability / and really just overall looks++aesthetics 😅🤣
Can this be order for and 03-06 gmc?