Are there trs balanced cables that plug into the speaker and then plug into a headphone jack (laptop headphone jack)? For example is there a balanced trs cable just like the rca cable where it has the headphone plug 3:36 & 5:28?
this video is for sub with link to powered speaker . sub and speaker can be connect using balanced ( XLR) or unbalanced ( rca) connector mix with differents cables ( rca2rca, jack2XLR, SLR2XLR). Is there others brand of sub/speaker that do what adam sub TS10 and adam speaker T5V in this vidéo ? Is there a way ( gear/DAC/amp) to have dolby atmos ( 5.1.2 or more 7.2.4) using a PC with ethernet ( Dante protocol) ? It ll be nice to use the many HDMI output of motherboard or graphic card to manage 3D sound ! Regard's
Is there a better way to connect my iMac to this suggested Adam Audio powered speaker rig than just using the 3.5 headphone out jack? Can I use on of the USB-C ports instead, into some sort of audio interface device, and would that give me a better signal, perhaps hum or noise? I'm running a Klipsch ProMedia 2.1 rig now, and besides beeing "tinny" and weak, I do get some line noise or hum sometimes.
is it possible to use a rca to aux cable in the rca output of the subwoofer, and use the aux for a single speaker? btw nice video, i learned a lot about subwoofers and how to use them!!!
if i get the same sound that i get from my headphones then i think that is a bad idea. I nee something like a scarlett solo in between to amplify the signal
Hey, great videos. I have a question. Can I use my Mackie FX ProV3 mixer in place of the audio interface? Or do I need to run them both together? I am using a Mac computer and I bought that particular mixer thinking it would work as an audio interface. It recognizes the mixer but I still get no sound. Thanks for all your help.
Is it possible to email you? I’m putting together my studio with a Mac Mini. I have a number of components for beat making and production. I’m using FLStudio. I’m learning as I go and need some guidance if you’re able. Ty
Great job, you made this super simple to understand.
Are there trs balanced cables that plug into the speaker and then plug into a headphone jack (laptop headphone jack)?
For example is there a balanced trs cable just like the rca cable where it has the headphone plug 3:36 & 5:28?
This is exactly the info I was looking for! Thank you for posting!
Does the 3.5mm to RCA connection compromise sound quality?
I'm using a AIYIMA A07 Amp
this video is for sub with link to powered speaker . sub and speaker can be connect using balanced ( XLR) or unbalanced ( rca) connector mix with differents cables ( rca2rca, jack2XLR, SLR2XLR).
Is there others brand of sub/speaker that do what adam sub TS10 and adam speaker T5V in this vidéo ?
Is there a way ( gear/DAC/amp) to have dolby atmos ( 5.1.2 or more 7.2.4) using a PC with ethernet ( Dante protocol) ?
It ll be nice to use the many HDMI output of motherboard or graphic card to manage 3D sound !
Regard's
nice video man. I have learned alot from you and now i own my own production company!
Ahh nice! Good luck with everything. It's a fun industry.
@@kettnercreative oh yes it is. Just got my first pair or JBL Srx828sp subwoofers in
Thank you for your succinct and useful tutorial video. Well done.
You're welcome, I hope it helped!
The 4th option works perfectly, Thank you so much!
Man you re the best! So into the point video with simple way, so much thanks to you!!!
Do your best Chris Bumstead impersonation.
using y cable splitter it work for me an amplifier and a soundbar...idk if that's balanced or unbalanced
the TRS is balance only if is not carry stereo sound !!! like the T is signal ....
Very helpful, thank you
Is there a better way to connect my iMac to this suggested Adam Audio powered speaker rig than just using the 3.5 headphone out jack? Can I use on of the USB-C ports instead, into some sort of audio interface device, and would that give me a better signal, perhaps hum or noise? I'm running a Klipsch ProMedia 2.1 rig now, and besides beeing "tinny" and weak, I do get some line noise or hum sometimes.
I only have 2 ports on mt sub for in and out
Thank you a lot. Video was helpful.
connect hi fi to mobo , and woofer to headphones ...works :)
Too useful thank you very much greetings
is it possible to use a rca to aux cable in the rca output of the subwoofer, and use the aux for a single speaker? btw nice video, i learned a lot about subwoofers and how to use them!!!
What if I don't have a soundwoofer? I just have a small single Behringer speaker. What cable would I use?
if i get the same sound that i get from my headphones then i think that is a bad idea. I nee something like a scarlett solo in between to amplify the signal
Hey, great videos. I have a question.
Can I use my Mackie FX ProV3 mixer in place of the audio interface? Or do I need to run them both together?
I am using a Mac computer and I bought that particular mixer thinking it would work as an audio interface. It recognizes the mixer but I still get no sound.
Thanks for all your help.
I do the same. You need to go into the Audio Midi Set up / choose ProFX / configure speakers to 3 and 4. Hope this helps.
Is it possible to email you? I’m putting together my studio with a Mac Mini. I have a number of components for beat making and production. I’m using FLStudio. I’m learning as I go and need some guidance if you’re able. Ty
Thank you!!!👍👍🤘
How do I wire connect my macbook pro to two JBL powered speakers? Thank you
Headphone Jack (1/4”) to whatever input is on your JBL’s
Hopefully u figured this out by now, just seen it was 5 months ago lol
great video!
Do the cables come with the subwoofer
Not typically
thanks to teach me to connect
Thanks!
Germans put the red right on the left side of the sub from the rear. I guess when ur looking at them its the right speaker..
dang speakers are bigger than the computer. so much for minimalism