I had another look at your video. I was thinking it would be good to have the memory option as you suggested but for something that you want to keep on all of the time there's a simple solution. Just use the panel to control a normally closed relay, so when you push the button it actually turns off the accessory.
I want to use this to replace my existing switch on my boat. The switching is just a standard one with accessory wires connected to the back. It is mounted on the dash with a cut out for the accessory wires to go through. This switch you are reviewing the size should cover the cut out. What is not sure to me is , does this have a mount option for me to screw onto the dash in place of the existing switch? Thanks!
Hey mate, love the content. Do you think you'd be able to just change the fuses to match what you want? Got myself a 2002 105 1hz pov pack with after market turbo.
I reckon you can probably change the higher amperage to lower ones if you wanted but not the other way around. Hard to know without being able to see the electronics inside the box
I had to wire it to come on with the high beams because that’s the law here, but out of the box the light bar didn’t have any means of doing that. I might have gone into a bit more detail in the light bar video?
@@WillsLandcruiser yeh i am from NSW mate, that's why I asked. So you explain it in the lightbar vid? Sorry this is the first and only video I have come across of yours as I was searching about these auxbeam panels. I will check it out 🤙
Hey mate, I honestly haven’t jumped on the app since I set it up! It’s the kind of thing you set and forget about so I guess that makes it a little more forgiving that it was pretty clunky and hard to use
Mate you could just use the blank stickers to blackout the unused buttons
Came here to say this
Hi Just let them know your suggestions!😉 Promised there will be more upgraded version coming up in the future!
yes please add the memory function.
I had another look at your video. I was thinking it would be good to have the memory option as you suggested but for something that you want to keep on all of the time there's a simple solution.
Just use the panel to control a normally closed relay, so when you push the button it actually turns off the accessory.
I want to use this to replace my existing switch on my boat. The switching is just a standard one with accessory wires connected to the back. It is mounted on the dash with a cut out for the accessory wires to go through. This switch you are reviewing the size should cover the cut out. What is not sure to me is , does this have a mount option for me to screw onto the dash in place of the existing switch? Thanks!
What about the max wattage you can put on it don’t you think it’s too low?
9:02 that not great. Is there another product that remembers what you had on?
Hiw to make a horn button momentary ty
Hi, where can you buy the fuse mounting brackets? does it come with the set or should they be purchased separately?
Thanks
do the switches work without accessories power?
Hey mate, love the content. Do you think you'd be able to just change the fuses to match what you want?
Got myself a 2002 105 1hz pov pack with after market turbo.
I reckon you can probably change the higher amperage to lower ones if you wanted but not the other way around. Hard to know without being able to see the electronics inside the box
So is your light bar wired to turn on with high beams? Or just via button?
I had to wire it to come on with the high beams because that’s the law here, but out of the box the light bar didn’t have any means of doing that. I might have gone into a bit more detail in the light bar video?
@@WillsLandcruiser yeh i am from NSW mate, that's why I asked. So you explain it in the lightbar vid? Sorry this is the first and only video I have come across of yours as I was searching about these auxbeam panels. I will check it out 🤙
Hi Will, has the app connectivity improved since your review mate?
Hey mate, I honestly haven’t jumped on the app since I set it up! It’s the kind of thing you set and forget about so I guess that makes it a little more forgiving that it was pretty clunky and hard to use
thx for the Video! Is it just working when the key is inside or is it also working in off mode?!?
It’s wired to function off accessory power. So the panel will light up when the key is on accessories.
Good stuff will thank you for sharing 👍🇦🇺
you are so cute !