Robbie you need all the hardware from the eg sub frame as well as the steering rack bolts and and bracket. Literally every that comes on the eg subframe. Only thing you'll be keeping that is oem ek is the upper control arms and upper strut you need the lower eg strut fork.
I didn't think anything of saying it last video when he mentioned the sub frame swap. I guess I figured he knew but then again when I first started my ek k swap that was something I had to figure out as well.
I'm building my ej1 and i sandblast the subframe and repaint it looks so amazing i will recommend if you have time and place to do it!! Good vibes here !!
With the rusty 10 special best way to get a bolt out of the socket is to clamp the socket in a vice and hammer another bolt into the top ... I’ve had to do it a fee times works beautifully
Thanks for the inspration to get back into the garage and back to work on my EK hatch.... Now im off to homedepot to buy paint for the Subframe.... Hey check out Downstar for bolts... he has kits man
I just figured out my EG subframe for the ek swap for anyone wondering: The EK control arms will fit with the EG frame. the bracket with the three bolts securing around the bushing will be slightly different and won't line up. I was able to save money by swapping the bushings and using the EG brackets instead of buying new arms. Best case: Get your subframe setup with everything included (steering rack and control arms.
Ball joints are wedges sockets and not normal straight sockets, so when you squeeze the mount, it'll push the call joint out. It's one of those old mechanic tricks.
hey robbie i sent you out about 6 hotwheels today you should get then in 3 days, and for the EK you should supercharge it with a Kraftworks superchrger
Tip for getting the rusty 10 out of socket: Put socket and rusty 10 on ground and continuously wack socket with with hammer. Another tip: WATCH YOUR FINGERS. Shout out from Hamilton Ontario
The sti at the beginning I have 2 of those and see them all the time if I could I would send you some I have like 30 hot wheels and a fast and furious 5 pack
Yeah but only at the end of the spot.. the way he did it is legal but it's best practices to have a disclosure early on, because the way a creator speaks on a product might sound genuine but really be influenced by the sponsorship money more than anything. (Just a general example, not necessarily what happened here) And being a TH-camr you have a lot of people that trust and look up to you (parasocial relationship) and will trust your opinion on a product without thinking about how money influenced that opinion. Is there room for debate on this topic? Absolutely! But it's also not that hard to overlay some text on screen near the start of the video indicating that this video contains paid promotion. Still can have the smooth transition into the ad spot but just be more clear about it being an ad spot
Wyh didnt you just cut thous bolts shorter Also you have to get new bussing for lower controll arms so that bolt can go thrue it and bold in to that frame if you get smaller bolts they wont thred in ;)
Are you going to do a video for like a “clean” engine bay? Like no wires no unnecessary hoses, etc? I been trying to find a solid video on how to do that:/. 7:45 looks like you just cleaned a grill haha
Robbie Hear me out, NOT COMPLAINING , just saying... acoustic panels are really cheap on Amazon and it would make a cool video for the shop 😎 also I think you might be able to get custom ones 💪💪
I’m gonna be getting a Ed hatchback in a few days and I’m 16 and was wondering how I could get 50 more hp out of the car without a engine swap and a turbo?
Robbie you should get a sandblast cabinet to save a lot of time cleaning up parts.
Sandblast cabinet and a pressure washer would make his life so much easier!
True
@@Treeees ikr!
Lesh go!!! Robbie rolling the vids out at the moment, I love it!!!
Can’t wait to see the hot wheels wall all finished hope you enjoy the hot wheels
use the integra powering stearing rack
Yes u have to use a EG/DC steering rack 92-95 civic or 94-01 integra
Happy thanksgiving y’all!!
You too!
Robbie you need all the hardware from the eg sub frame as well as the steering rack bolts and and bracket. Literally every that comes on the eg subframe. Only thing you'll be keeping that is oem ek is the upper control arms and upper strut you need the lower eg strut fork.
Exactly what i was about to comment!
I didn't think anything of saying it last video when he mentioned the sub frame swap. I guess I figured he knew but then again when I first started my ek k swap that was something I had to figure out as well.
Linus tech tips may want to take some notes here, that sponsor segue was butter smooth
Gotta be careful what you say bro!! 5:43 🤣
My "rusty ten special" gets a 9mm and a sledgehammering. Can't forget the blowtorch too!
I'm building my ej1 and i sandblast the subframe and repaint it looks so amazing i will recommend if you have time and place to do it!! Good vibes here !!
With the rusty 10 special best way to get a bolt out of the socket is to clamp the socket in a vice and hammer another bolt into the top ... I’ve had to do it a fee times works beautifully
Hey, I sent the first one with the Subaru and pickup. Glad to see that you got it!! 😁🤙
Love it when u post things that don't go as planned, makes u different from the others
Thanks for the inspration to get back into the garage and back to work on my EK hatch.... Now im off to homedepot to buy paint for the Subframe.... Hey check out Downstar for bolts... he has kits man
Install a quick ratio steering rack from quaife. They are for eg subframes.
The speed factory springs are dope they add more downward force giving you solid ratcheting shift feel and more crisp gear changes 🤙🏻
I just figured out my EG subframe for the ek swap for anyone wondering: The EK control arms will fit with the EG frame. the bracket with the three bolts securing around the bushing will be slightly different and won't line up. I was able to save money by swapping the bushings and using the EG brackets instead of buying new arms. Best case: Get your subframe setup with everything included (steering rack and control arms.
Yea bro you gotta get the hardware from the eg the bolts are diff
Are you planning to run some AC in the summer as well? Heat is mandatory for Ontario winters, but I’m curious if you’ve thought about the summers yet.
Hope you enjoy the hot wheels! Love your content Robbie!
HAVE A GOOD THANKSGIVING ROBBIE!!!!!
You should invest in a sand blaster it would clean it up heads better and it would be les effort
I’d like to see a future project with cars like, 240, skyline, supra, Silvia, pretty much anything in S chassis platform
Ima check my garage I recently removed a subframe from an eg i still got the bolts
For stuck ball joints, take two hammers, hold one side to the one side of the mount and smack the other, the ball joint should pop out.
Ball joints are wedges sockets and not normal straight sockets, so when you squeeze the mount, it'll push the call joint out. It's one of those old mechanic tricks.
You need eg subframe bolts and steering rack if I remember right
Bro I would say u should or could paint the inside of the fender frame just so its cleaner and looks nice plus no rust in it.
Robbie and Dmaxryno are the only automobile youtubers that I watch as they upload
Both are So good
I own a Commuter 2 and it is a good speaker when it is on a sale
Hey Rob. Quick question.. did you have to replace your strut forks with an eg set to use with the eg lca's? Thanks
You should invest in a sand / glass pearl blaster for the rusted parts 👌🏻
Keep it up with the videos man 👍🏼👍🏼👍🏼
Thank you for inspiring me to work on my own car more. Love you man keep up the good work
Just got one super excited
Sooo good to see a car heavy video again!!
you should sticker bomb the genny with everyones stickers and tags
You can get a brand new eg manual rack with inner tie rods for like $100 that’s what I did then put a Quafe rack and pinion in it.
hey robbie i sent you out about 6 hotwheels today you should get then in 3 days, and for the EK you should supercharge it with a Kraftworks superchrger
Get the eg rack it will work with the ek.
i remember being here since like 30k man how time flys
Tip for getting the rusty 10 out of socket: Put socket and rusty 10 on ground and continuously wack socket with with hammer. Another tip: WATCH YOUR FINGERS. Shout out from Hamilton Ontario
Just use a manual steering rack , it’s not bad feels smooth once u get going
The sti at the beginning I have 2 of those and see them all the time if I could I would send you some I have like 30 hot wheels and a fast and furious 5 pack
Hey Robbie you should have Sandblasted the subframe
Ayyyy frequent uploads... helllll yeah brother #committedcrew
Can’t wait to see where this build goes. Love it 🤘🏻🤘🏻
we want the Christmas tree and is Steve at the new house?
Got to get a EG steering rack
What is the name and brand of that undercoat?
Do they need to be ina box?
Happy Thanksgiving yall
you should look into sand blasters 💪
Put the ls in it?
Oh shit I go to Wasaga Beach all the time
Happy thanksgiving everyone!
Happy Thanksgiving!
I got a neat hot wheels to send can't wait
That was the most seamless sponsor transition ever! Respect Robbie 😂🙏🏼 Happy Thanksgiving mate
Use a pickle fork to get that ball joint out, easy
Remember to disclose the fact that a sponsor spot is a sponsor spot, at the beginning of the sponsor spot to avoid any potential legal issues :)
He did say it was sponsor
Yeah but only at the end of the spot.. the way he did it is legal but it's best practices to have a disclosure early on, because the way a creator speaks on a product might sound genuine but really be influenced by the sponsorship money more than anything. (Just a general example, not necessarily what happened here)
And being a TH-camr you have a lot of people that trust and look up to you (parasocial relationship) and will trust your opinion on a product without thinking about how money influenced that opinion.
Is there room for debate on this topic? Absolutely! But it's also not that hard to overlay some text on screen near the start of the video indicating that this video contains paid promotion. Still can have the smooth transition into the ad spot but just be more clear about it being an ad spot
It’s not that serious you saying he might get in legal trouble is only speaking it to existence
You have to paint the enginebay Robbie
Since the original EK9 subframe is beefy, why did you swap it with an EG6 one???
Im a simple guy i see a youtube notification from Robbie Ferreira
I click
LETS GOOO ANOTHER VIDEOO day cant get better pinkbike uploaded robbie uploaded lz uploaded gr8 day 🤘
What color will the EKs engine bay be ?
I think this will be my 3rd Robbie Christmas
i dont know why you dont have over 1 million subs youre the greatest youtuber ever
Does his Ek have powersteering???
I like your videos man! keep going ! :D
Great video bro cant wait to see it rip ..... what hotwheels are you looking for I'll send ya a bunch
Easiest way to get the rusty 10mm out of the socket, put it in a vice, and beat it out with a punch through the socket
What size is that garage?
I have a sti just like that
Robbie dropped a video? It's going to be a good day!
Of course we know about the mitosis speaker
Wyh didnt you just cut thous bolts shorter
Also you have to get new bussing for lower controll arms so that bolt can go thrue it and bold in to that frame if you get smaller bolts they wont thred in ;)
Sheet Robbie when u done let me get that EK!!!
Love your content man also what mic do you use?
Whooooo new vided
Saw the sponsor and what came into my mind DDE
Best turkey day ever
Yes can't wait to see what the hot wheels wall
Are you going to do a video for like a “clean” engine bay? Like no wires no unnecessary hoses, etc? I been trying to find a solid video on how to do that:/. 7:45 looks like you just cleaned a grill haha
He did a wire tuck on the eg civic
@@domscott3845 I know I meant something in more detail and has very minimal tools to work with :)
Nice!
Robbie Hear me out, NOT COMPLAINING , just saying... acoustic panels are really cheap on Amazon and it would make a cool video for the shop 😎 also I think you might be able to get custom ones 💪💪
Somebody needs a media blaster and/or a parts washer...
AHHH yeah another civic vid WHAOOO!!!!
Love the vids
for us non honda people what is eg and ek?
I bet you once you put that built k20 its gonna make a lot of beans and a lot of power
Hotwheelllllllllll 😍
I’m gonna be getting a Ed hatchback in a few days and I’m 16 and was wondering how I could get 50 more hp out of the car without a engine swap and a turbo?
Literally any other part lol, anything from the air intake to an exhaust
Recommend do polyurethane bushes if u gonna turbocharge the car.
damn i wish i could do shit like you do, keep up the good content man
Hot wheel dedicated video? I would love to send hot wheels but I can’t sadly🙁
Aye SBoys are great lads, I know them, super sick!
Happy Thanksgiving y'all!
Do Canadians celebrate Thanksgiving? Probably not.
Happy Wednesday my dude!
Shit, it's Thursday.
Hi, thank you for the vid bro
We should wrap the car in a metallic teal and a white Wheels