I can relate to this build so much. Although I won't make the progress you will. I went down the rabbit hole on my crx with cleaning up the interior. Gutting it and cleaning everything.
Hey Robbie! so proud of all the progress you made. I remember when you put the yellow tint on the BRZ's headlights in a shop that wasn't yours and now you've come so far and yet stay so humble. You are a true icon in the automotive part of TH-cam. (also Ultra-8!)
I'd love to see just a clean build. Just a stock looking EG with a K swap, lowered with nice wheels and some quality seats!😎 I feel like the ricer civic's are a litle over done now.. ULTRA-8🤟🏻
I remember seeing this car when I met you and Chris to look at the other civic hatchback and watching you work on it now makes me very excited to see you work on it and also gives me tips to take apart my civic
I’m taking apart my 02 rsx. Got a double din and wiring the backup camera. The car is basically all apart now but you make me wanna take out the front seats and completely gut and clean it since I got a few months of it sitting in the garage.
Consider mounting the bender to the floor right behind the lift post with the oil reservoir on it then you would have the entire swing of the other bay and it would be in between the two doors so you might not have to take it down all the time
You inspired me to clean up my garage so I can do stuff to my car inside of it (finally, cause no car ever was sitting in my garage!) ultra-8!! Keep it up brother
I used some drop in anchors in the middle of one of my garage parking spaces, mounted the tubing bender and when I get done with it I just un-bolt the bender and put the bolts in the drop in anchors so it doesn’t fill up with dirt, etc. works great and I can tuck it away when I don’t need it🍻
I say you build just a little sheltered shed off the side of the garage or close to for the pipe bender so it had its own room and plenty of space if you need to bend a big pipe. Love your vids from New Zealand
I love sandblasting. It’s so satisfying. Also you should wait a minute or two before you open the lid after blasting. The particles will settle so you don’t make a mess
Whats rusting on your car is the left and right apron which is absolutely the "frame frame" but its all good those civics are not made for you to live when crashes so any frame upgrade is a good one
hey Rob you should get about 10-15 can of DEI BoomMat Spray sound insulation and coat the full interior with it, as it would help to reduce noise and heat from the interior as well as it will help the ac be more efficient it would even be good to coat the chassis with as well, Did you receive the hotwheels i sent you last week
You could always mount the pipe bender to a small rolling stand/bench and screw or clamp it to something when its in use, then you can always roll it put of the way. Ultra8
Just saying could build a small building for like pai t booth an for your pipe bender or if needed to do a big welding job and might help keep the grage cleaner
Kinda stoked thst youre pretty much doing a complete restoration on Katie, or at the very least just a rust prevention on it, i love seeing old cars that are clean and taken care of
When you do end up buying a angle kit for the Jenny buy from fdf fabrication in Trenton. He also has dual caliper brackets as well as hydro mount and assemblies.
It was so satisfying to watch this episode xD Im glad you didnt "need" to go over all the inside with the protectioncoat :) My OCD would have made me do it if it was my own car. And it would've been hell i bet! :p GJ on keeping it real and fully sending it.. It's admirable and motivating.. Keep on, keeping on :D
What about a small out building that’s connected on the single door with another single door to exit. Could have a concrete floor with enough space for pipe bender and few other tools or storage. Hope you read this, newish fan 👌👌
Ultra-8 ALWAYS WATCH TO THE END🤟🤙🤗🤗
You gave it away
Teacher: how are you spending your time in this second quarantine?
Me: Watching a guy mess around with his cars lol
Second?
Bro the intro XDD
😂😂😂
😂😂
Imagine the guy who sold Robbie this car and sees all the videos where Robbie shows all the rust spots
He probs remembers them all lmao
ULTRA 8
Don't wide the car, keep it sleek. Ajay got a wide body civic, don't take from it.
He’s already got a wide body hatch. Let him do what he loves
wide bodies can be sleek too
Robbie everytime u upload its gotta be that instant click, where is my noti gang?
Noti gang
Noti gang
Noti gang
Yessir 🤘🏻🤘🏻
To help with the leakin in the sandblaster still a hole and hook the shop vac up to it it works very well
Hey congrats on 250k man!!!
I can relate to this build so much. Although I won't make the progress you will. I went down the rabbit hole on my crx with cleaning up the interior. Gutting it and cleaning everything.
Hey Robbie! so proud of all the progress you made. I remember when you put the yellow tint on the BRZ's headlights in a shop that wasn't yours and now you've come so far and yet stay so humble. You are a true icon in the automotive part of TH-cam. (also Ultra-8!)
Ultra 8
Love that interior cleaning!!! Full send!
ultra - 8 !!!❤️❤️❤️❤️❤️
I'd love to see just a clean build. Just a stock looking EG with a K swap, lowered with nice wheels and some quality seats!😎 I feel like the ricer civic's are a litle over done now.. ULTRA-8🤟🏻
Ultra 8 man. I don’t even mess with cars it’s just your energy in the vids that keeps you as the only TH-camr I wait for uploads from ❤️
I remember seeing this car when I met you and Chris to look at the other civic hatchback and watching you work on it now makes me very excited to see you work on it and also gives me tips to take apart my civic
I’m taking apart my 02 rsx. Got a double din and wiring the backup camera. The car is basically all apart now but you make me wanna take out the front seats and completely gut and clean it since I got a few months of it sitting in the garage.
7:34 bondage lmao
Best intro so far😂
Gonna be yet another epic build!!!!
Ultra-8. Katy coming along good Robbie. Well done!
Consider mounting the bender to the floor right behind the lift post with the oil reservoir on it then you would have the entire swing of the other bay and it would be in between the two doors so you might not have to take it down all the time
Robbie you are the best keep doing what you were doing #inspired
love your videos so much broo! 🔥💥
You inspired me to clean up my garage so I can do stuff to my car inside of it (finally, cause no car ever was sitting in my garage!) ultra-8!! Keep it up brother
Ultra-8. Great video Robbie, can’t wait for the completed Katie.
Ultra-8! I always watch the whole video! This EK is gonna be absolutely sick. I can't wait to see everything you're gonna do to it!
Hell Yeah Brotha! Widebody! Widebody!
I used some drop in anchors in the middle of one of my garage parking spaces, mounted the tubing bender and when I get done with it I just un-bolt the bender and put the bolts in the drop in anchors so it doesn’t fill up with dirt, etc. works great and I can tuck it away when I don’t need it🍻
ayyy love u robbie! merry chrysler❤️❤️❤️❤️
The fact I open youtube not knowing what to watch but, if Robbie makes a video I know what to watch! :D
I say you build just a little sheltered shed off the side of the garage or close to for the pipe bender so it had its own room and plenty of space if you need to bend a big pipe. Love your vids from New Zealand
I suffer from bad anxiety but watching Robbie work on his cars makes me relax. Looking forward to the next video.
I love sandblasting. It’s so satisfying. Also you should wait a minute or two before you open the lid after blasting. The particles will settle so you don’t make a mess
Ultra 8, love it when the job is done right
Ultra 8 LOVING THE BUILD!
Ultra-8 Always watching till the end. Show us more bloopers 🙌🏼👌🏼
Wire wheel them and then clean coat it you will not hate what it looks like. It’s a very clean look.
Love seeing your videos Robbie! I'm getting excited to see you go full send on this car!
Also, ULTRA-8
My garage is like same size with same lift .. I only put one garage door on it and use the entire second side for my gear and working area
Ultra-8! Keep Up the work Robbie
Ultra-8 super stoked to see more with this civic
"Ultra-8" I cant stop watching your videos bro. Even if you do something small, it still seems interesting. Also, I watched the ads at the end too.
Ultra 8 !! Great video as always!
ultra 8 going to turn out amazing
Always to the end boy!! Ultra 8!
Whats rusting on your car is the left and right apron which is absolutely the "frame frame" but its all good those civics are not made for you to live when crashes so any frame upgrade is a good one
hey Rob you should get about 10-15 can of DEI BoomMat Spray sound insulation and coat the full interior with it, as it would help to reduce noise and heat from the interior as well as it will help the ac be more efficient it would even be good to coat the chassis with as well, Did you receive the hotwheels i sent you last week
You could always mount the pipe bender to a small rolling stand/bench and screw or clamp it to something when its in use, then you can always roll it put of the way. Ultra8
Find a brake drum for your pipe bender you can make it removable with that ultra eight
ULTRA-8 FULL SEND! HELL YEAH
Ultra-8 ofc!
alltra 8 at 4:27 am Watching your videos never gets old
Every time I open TH-cam this the channel I’m looking forward.😼😎
0:50 some blasters have a spot to hook up a vacuum so the air doesn't fill up with sand 👍
Also ultra 8 😂
just a ques is that blue wire an ethernet cable
i rlly dont know much about car wiring
Just saying could build a small building for like pai t booth an for your pipe bender or if needed to do a big welding job and might help keep the grage cleaner
Kinda stoked thst youre pretty much doing a complete restoration on Katie, or at the very least just a rust prevention on it, i love seeing old cars that are clean and taken care of
hey robbie! look up M & M wide body kit for the EK civic!❤️❤️
Ultra-8, always watchin robbie's vids to the full!
Ultra 8 thx for another great video robbie
you should put the pipe bender in the garage or something like that and ultra 8
robbie you should soundtreat the interior while you got all that out, look into MLV and sound deadeners!!!
oh yeah and ultra-8 baby
Ultra 8 love the content brotha. Look forward to more
he can try and make a small concrete pad outside for the pipe bender?
Robbie drill into the concrete and use Lag bolts so you can bolt the pipe bender down and then remove it and the sleeves will be flush with the floor
Also if your going to weld stainless steel for the tube front end use stainless steel wire and the right consumables! Love the build
Ultra-8 always love the content you put out
When you do end up buying a angle kit for the Jenny buy from fdf fabrication in Trenton. He also has dual caliper brackets as well as hydro mount and assemblies.
I love seeing these videos. Wish I could work on something like this, but I'll stick to my tiny customs, more fitting to my kinda budget haha
Ultra-8!
Ultra 8 always watch till the end pf the videos
Greetings from Germany you're doing such a good job dude love it
hey robbie i have i couple classic cars but they’re not hot wheels will take those by any chance?? Ultra-8❤️
That stuff is abit like por15 you can put a top coat over it for uv protection/ULTRA8
Ultra8 I need that paint stuff, my car has rust crap that I need to get rid of
Ultra 8 , I always watch to the end
You should rhino line the full interior of the floor to keep from rusting and if you
Love your vids bro from Scotland
Nice looks like you got a plan and are doing it up like ultra 8 man
wrap the headliner and do fiber optic star lights!!!!!!!!!
Yay Robbie posteddddddd
love the progress, keep up the good work, ultra-8
Good evening from the UK
ultra 8 keep it up robbie
Can't wait to see the ultra-8 build commence
Whats wrong with pouring a square of concrete outside and putting the pipe bender out there?
I hoping you start a Ek hatch wave that would be sick!
Ultra-8 my guy! 🤗🤗🤗
It was so satisfying to watch this episode xD Im glad you didnt "need" to go over all the inside with the protectioncoat :) My OCD would have made me do it if it was my own car. And it would've been hell i bet! :p GJ on keeping it real and fully sending it.. It's admirable and motivating.. Keep on, keeping on :D
Make plates that you can mount to the floor that you can slide the bender in and out of -ULTRA-8
What about a small out building that’s connected on the single door with another single door to exit. Could have a concrete floor with enough space for pipe bender and few other tools or storage. Hope you read this, newish fan 👌👌
I just saw your very old videos i cringed '
Im so happy you changed from that MIserable man to the man we know and love now
Nice progress! Ultra-8
Ultra 8 ...great start ....
Ultra-8
Greetings from Belgium.
Love your videos man i’m watching you from where you’re brz was stock
Ultra 8, never stop before the end! 🤘💪
How do you keep all your bolts organized??
Ultra-8 Love the vids keep em up!
ultra 8
the civic is about to start looking nice 🤙
I painted the entire underneatath of my Ek with the dom16 stuff. Hope it's good
Ultra8 baby!
Robbie you were missing those 2 bolts in the seats because those are Integra seats and only 3 bolts fit when you put them in EK
This Chanel is under rated
Glad you decided to do a full resto, ultra-8