Please help me, I just bought a graphics card gtx750ti I installed it in the device and the device did not recognize it and I tried to download the drivers but failed to identify the card, but I found a program that downloads the missing definitions for the computer and when I downloaded the drivers and rebooted the computer no longer works when Unplugging the card works normally, and when I connect it, it works and displays a screen, but it stops before the Windows sign appears and there a small A mark at the top of the screen keeps turning off and lights up and I haven't found any solution on TH-cam to the problem. Please help me. If there is a way to contact you, I can send you a video. I hope you answer because I am afraid that I may have damaged the card 😥😥
@@MacCoyzkie hey so I’ve tried both of them and neither of them work. I’m thinking of getting a new motherboard and hopefully by the sounds of it you can support me? Whenever I turn on the pc without the gpu installed at all (not inserted in pc) it turns on fine but whenever it’s on the motherboard not even connected using the pci-e cable it doesn’t turn on. I’ve tried re-installing drivers, Newest bios, and my power supply that came in didn’t work so I had to return that. I’m thinking the power supply messed up the motherboard???? Because before the knew power supply (and I’m sure it’s enough wattage) the hardrive didn’t work and the motherboard had the same problem. And with the knew supply it’s just the motherboard in both gpu slots. Should I get a new motherboard? Or is there another fix it’s just there’s so many variables like the pci-e connector got burnt out from the old power supply or the other cables are junk. The gpu itself might have been damaged from the old power supply. But even after all this we went over to my friends house and swapped my 3060ti for his 3050 and it worked fine in his pc. This is very sad and another month of no pc but is it a motherboard problem. Thanks for reading this and I hope you respond.
A little info: Cpu: Ryzen 5 7600 Gpu: rtx 7900 xt Ram: ddr5 ram 32 gb My pc was first turned on November the 12th, not sure if that’s still considered new. Up until this point I was using mobo ports. But I recently did the switch from 60 hz to 144hz so I needed to use the gpu ports (plus I didn’t know I was supposed to use them lol) but the ports don’t work on my gpu, but when the cords are in the mobo it’s just fine
there are plenty of reasons why the gpu is not working even after doing the suggestions in the video. This might have something t o do with your psu or at least the gpu is not receiving enough power to run itself therefore the mobo is not detecting it as main display. may i know what is your psu model and if you have plugged the pcie power cable for the gpu th-cam.com/users/shorts9N_5YmJRHko
I just went through blood and sweat because it wouldn't post and had a long beep and three short beeps. I did what you showed me, taking off all power sources, pressing the power button, and taking my monitor down to the level of my PC. I even disconnected my monitor. AND then it freaking works! as if my monitor restarted at that moment! thank you and thank God.
You saved my day, I was looking for a new GPU to play GTA v, and it did not show any display, but when I completed your first method it worked, you're the best❤️
It works like a charm after the second guide!! Shocked for a bit because it didn't work but found out I was dumb enough to not connect the GPU cable back again haha. Anyway, thanks for your kind guide, sir!!
Wow, I actually didn't expect that this would solve my issue, but somehow it did... Wasted several hours off removing and adding hardware, resetting CMOS, uninstalling Nvidia drivers etc... Ugh
@@tsuki3003 Why not just do both? Maybe the first one will be enough? I'm pretty sure i tried both but it was the second one that worked for me, removing the integrated graphics driver (2).
TO THOSE SEEKING HELP WITH GPU DETECTION ISSUES AND HAD A PREVIOUS CARD AND OR WAS USING INTERGRATED GRAPHICS UNTIL THEIR CARD CAME.... CLEAR YOUR CMOS VIA YOUR JUMPER WITH A SCREW DRIVER OR PULL THE CMOS BATTERY. MAKE SURE TO REMOVE YOUR HDMI FROM MOTHERBOARD AND PLUG IN YOUR DISPLAY PORT CABLE AND HDMI IF U HAVE DUAL MONITORS. DO THIS WHILE PC IS OFF AND PLUG PULLED AND GPU INSTALLED READY TO GO. START SYSTEM AFTER CLEARING CMOS AND BOOM HEADSHOT!!!YOUR BIOS WAS HOLDING YOUR NEW GPU HOSTAGE , from there you go to windows update and it will install your Nvidia display driver(basic) then update your driver's from website of Nvidia, also it doesn't hurt to have CCLEANER and clean your registry with it and run a custom clean. When updating drivers u downloaded do a fresh install. Your welcome. This video is legit and works for the cases mentioned . Thanks buddy
@@selmarehman9534 Your cmos is what stores your Bios settings. Just like an alarm clock would keep time and alarms when the power goes out when having batteries installed. So by removing that watch looking battery that is usually placed somewhere on the front of the motherboard it resets so that incase a setting is preventing the motherboard from booting you are able to clear it by removing and installing it right back after 30 secs or so. Hope this helps.
@@nah6781 thank you for answering. I did remove it but nothing helped. It still shows “no display”. I think Ima get a new graphics card cuz nothings working
This helped!… somehow haha. I did so much research thinking my 3080 ti was just junk but after installing the drivers while my old GPU was in (1080 ti) then following your first steps, it worked. I guess taking out the CMOS battery did the trick but who knows. Thank you for the vid!
Hi Richard, I'm have the same issue and same upgrade from 1080ti to 3080. I have i7 4790k And PSU Corsair cx750m It displays on my on board graphics but no display on the GPU. Was wondering what PSU you have..
So happy I found this.Thank You !! I got GPU display now, but just want to add two tips that may help others. On my MB the BIOS battery is under the GPU, so BIOS reset must be done when the GPU is removed. At first I did not get a display with the HDMI cable. I then tried with the D-Sub (VGA) cable and it worked!
Thank you so very much, Mac! The 2nd step with uninstalling the iGPU worked like a miracle. I was going to return the entire pc setup as it was bothering me so much! Appreciate what you have tried and tested to resolve this issue!
I have no idea who you are , how you look like , what you did and what you will do but thank you and i love you I was trying to fix the problem for 2 hours until i try your method thinking “this is probably not gonna work and my gpu is probably dead” AND THEN IT FREAKING WORKED AND ALL MY RELIEF GOT RESTORED
i literally ordered a new gpu bc i thought my old one didn’t work and this fixed my new one so i spent $217 on a card for no reason, i mean it was an update but anyways thanks so much man! this worked great :)
Thank you so much! I was so desperate and about to return my gpu thinking it was the gpu's fault. I did the second one and it works like charm. Thank you oh thank you!
hey bro pls help my computer is showing display on igpu but when i plug in my gpu the computer fans are spinning even gpu fan spin for some second then stop and i am not getting any display as well as my mouse and keyboard lights are not showing , as i remove gpu everything runs fine can u tell me whats the problem its psu or gpu fault???
@MacCoyzkie I've tried 5 gpus I know work and none show signal aswell (new motherboard aswell) the only thing that shows signal is the motherboard and none of the suggestions work
thank you so much, I thought I had tried everything and was ready to take my PC to a shop I decided to give it one more shot after watching your video and its now back up and running
It is work for old pc?? Mobo:Intel G31 Cpu:Intel Dual Core Gpu:gt 210 Edit: Mine actually dont work cuz like this... My HDD is from 3 PC's (one HDD for 3 pc's) cuz all that pc had broke down, so the drivers that installed on the Hdd maybe a lot. But I had clean it. By time that I installed the gt 210 gpu, it worked and after that one of my regular use pc had an error so I use it for the broke pc to make backups. After that I installed back to my working pc and my gpu is not working. My pc keep restarting. It restart when on windows 7 logo. I go into safe mode and uninstall the gpu driver and the standard vga adapter appear. When I boot from standard vga adapter driver it worked but not for my gpu... Plizz sir help me
@@tdm3bros if your cpu supports integrated graphics you can go to bios and enable it, some motherboard may not allow it though so go and check if your mobo supports it
My PC and GPU was running fine. Yesterday it turn off automatically while booting and it never turned on. I pressed the power button several times but no luck. Then I unplugged the GPU and my PC instantly booted when I pressed the power button. Now my PC is running on iGPU. Please help, What should I do? I have an Radeon HD 5670 :(
@@quietkid52 can you ask a friend with compatible pc to try the gpu. Perhaps it’s either faulty or incompatible in your build. Though it’s rare but it could happen
Just a FYI: I tried this last night using my Asus Prime A320M-K + R5 1600x + GTX1070 + 24gbRAM, and if you really want the result from method #1, then you should: Steps: 1. Remove the RAM 2. Remove the CMOS Battery 3. Remove the GPU 4. Unplug your computer from electricity 5. Drain your computer by pressing the power button for 5-10 seconds. 6. Wait for atleast 5 minutes. 7. Plug in everything you've removed recently and test it. If some made it, great job on troubleshooting it on your own.
Hi bro, thanks a lot for this info. you help me on my problem today. This is my first time to buy a new GPU and this is what happened to me. Im sweating a lot and dont know what to do, until i watched your video and resolve my problem. I already thinking if i need to return my GPU to the shop where i bought, and tadahh.. it works very fine now. thanks on your very helpful tips. :)
might just be loose psu cables or gpu was not plugged in all the way. I suggest double check the ram sticks as well since pc won't boot at all without it
@@pranaybhagat5373 did you have any power fluctuation in your house lately? if so then that is a power outlet problem. If not then this might be a failing psu, it doesn't mean your fans are spinning and lights are on means your psu is giving enough juice for your entire system. I suggest use Avr or ups if you have any or at least borrow from someone you know to confirm the theory
@@MacCoyzkie bro can u look on my problem Well first my spec I5 10400 16gb ram Msi b560m pro Intel uhd 630 As i got a new gt 710 gddr3 my hdmi port works for a sec then the screen black out Vga is working properly but low quality And i have only old driver it is a fermi card btw version 391.35 Pls help me
I gave up on my GPU since a year and today I thought to check if it still works and it didn’t and now when I tried your first method, it worked flawlessly 😍 Thank you so much man!
The issue i previously had (still do but neglecting it) was on my laptop. its gtx 1650 keep disappearing. Ive tried every possible method to fix, clean uninstall drivers, os, and even rechanging thermal paste but to no avail. What do you recommend, sir Mac? Should I have this one check for hardware issue? Thanks!
back up all important files and do a clean windows installation, if that still doesn't work try the ultimate ram cleaning in this video th-cam.com/video/F-dLBIomghY/w-d-xo.html which i guess you already have. I also think it is a hardware issue more likely the motherboard since it is failing to detect the gpu
I am experiencing the no display on my dell xps8300 after installing an AMD rx550 gpu. Tried both methods and both unsuccessful. Any assistance would be appreciated. Tx
Just want to say this, if this doesn’t work the windows restore from save point seems to fix it as well. It can be an absolute heaven sent miracle or it could be an actual fix
Thanks man you saved me a headache, I used the first method but I have a mini atx motherboard with 2 gpu slots and couldn’t reach the battery while the gpu is plugged in so I took out the battery then plugged in the gpu then after 5 minutes took out the gpu again and put in the battery then put In the gpu and it worked with all other steps thanks so much.
Awesome video! I was actually using safe boot to pretty much do step 2 because old intel hd kept trying to take priority and I could disable it there. Step 1 trick worked great, I rushed a bit my first try taking the battery out and it didn't work but then I tried actually listening to removing the battery for five min lol worked perfect! Multiple restarts and no problems with 1050 taking priority now :D
It worked!!!! THANK YOU!!!! Somehow I disabled the monitor output in my BIOS by pressing the wrong boot key and could NOT find out what button to enable it again. I also couldn’t get into the BIOS menu…
Hey so your probably here running into the same problem as me haven't found the answer, well F*** the gatekpeers If your connected to a gaming laptop to a monitor the simple solution would be to buy a belkin USB C HUB it will now connect to your dedicated graphics instead of your integrated.
When connecting a gaming laptop to a monitor, it's frustrating to deal with defaulting to integrated graphics. One solution is getting a USB-C hub like u mentioned, which can help route display output through the dedicated graphics card, gaming performance might not be good though. I haven't tried belkin but i tried this one already th-cam.com/video/L8VsyoD1FLQ/w-d-xo.html and works very well. Just make sure to check compatibility before buying. Alternatively, some laptops offer manual graphics switching options in settings.
Oh my god bro thank you doo much its my first time building a pc and i was soo nervous and sacred since im not very rich yk i cant buy another part since i already have spent all of my money thank you so much it helped me may god bless you brother
wait.. you why do you need more gpu? anyway to answer your question, that might be driver conflict issue or at least your motherboard does not support more gpus
I dont understand how the batter thing can fix the issue. In any case none of the solutions worked for me sadly. My graphics card suddenly became undetectable by the bios, while I was in the middle of playing Elden Ring. The display monitor just lost signal, became black and I had to restart the PC. To no avail, whatever I do, it's like the graphics card no longer sits on the motherboard. This is so weird, since I have not pushed, bumped or move the PC at all. Everything was working fine for 8 years, then suddenly, in the middle of gaming, boom, graphics card goes MIA. I will have it tested in a repair shop tomorrow, to see if it just died out of nowhere. This makes me sadder than when I broke up with my ex, no kidding. I loved my Nvidia Geforce GTX 980 Ti 6gb so much... It brought me so much happiness and never asked anything in return.
sorry to hear that bro, if there is anything i hope its just a psu problem not gpu. usually there will be glitches like in this video th-cam.com/video/U_2qRkkf-oM/w-d-xo.html if your gpu is dead. i hope the test have a positive result
i have yestron rx560 4gb,the issue is my gpu has no display output already tried different plugin wire hdmi, dvi and dp vga cable but still no display but one thing for sure my gpu still work there is a sound which is start up sound you what ii mean right? any help!?
Thank you so much bro , you saved my money . CMOS method did the job 👍. But on every start after shutdown need to remove CMOS battery for few sec for getting proper start with display . You know any solution?
@@han.9.598 can you try your gpu with a different pc, ask a friend if you don't have extra at home and see if the results are the same? if it is then the gpu might be the problem
My brand new pc. With a brand new card, everything is installed including drivers. It doesn't show up in device hardware, but it recognizes in on control center and even said my exact card on the screen. Little confused
@@MacCoyzkie LMAO I literally fixed it an hour ago doing this. Thank you man. You're the goat. Subscribing just for that correct answer. My problem was that I had monitor in mb. And HDMI in card.
Scoured Reddit for hours for a solution! Worked like a charm - thanks!
My rig:
MSI B550 Mortar WiFi
Ryzen 5 5600G
Asus 3070 TUF GAMING OC
you are my first ever "Super thanks" supporter! Glad it worked for you and thank you too for the support!
Please help me, I just bought a graphics card gtx750ti I installed it in the device and the device did not recognize it and I tried to download the drivers but failed to identify the card, but I found a program that downloads the missing definitions for the computer and when I downloaded the drivers and rebooted the computer no longer works when Unplugging the card works normally, and when I connect it, it works and displays a screen, but it stops before the Windows sign appears and there a small A mark at the top of the screen keeps turning off and lights up and I haven't found any solution on TH-cam to the problem. Please help me. If there is a way to contact you, I can send you a video. I hope you answer because I am afraid that I may have damaged the card 😥😥
@@MacCoyzkie hey so I’ve tried both of them and neither of them work. I’m thinking of getting a new motherboard and hopefully by the sounds of it you can support me? Whenever I turn on the pc without the gpu installed at all (not inserted in pc) it turns on fine but whenever it’s on the motherboard not even connected using the pci-e cable it doesn’t turn on. I’ve tried re-installing drivers, Newest bios, and my power supply that came in didn’t work so I had to return that. I’m thinking the power supply messed up the motherboard???? Because before the knew power supply (and I’m sure it’s enough wattage) the hardrive didn’t work and the motherboard had the same problem. And with the knew supply it’s just the motherboard in both gpu slots. Should I get a new motherboard? Or is there another fix it’s just there’s so many variables like the pci-e connector got burnt out from the old power supply or the other cables are junk. The gpu itself might have been damaged from the old power supply. But even after all this we went over to my friends house and swapped my 3060ti for his 3050 and it worked fine in his pc. This is very sad and another month of no pc but is it a motherboard problem. Thanks for reading this and I hope you respond.
@@gamalsaid5 guys i need you to create a new comment less i will miss answering it
@@brodieremillard925 new comment will help me see the comment faster than commenting on existing one, my bad i really missed this comment of yours
If yours still doesn't show display try checking this video out ► th-cam.com/video/F-dLBIomghY/w-d-xo.html
I have done both methods n neither worked? I just wasted 140 on this monitor, cuz now my gpu ports don’t wrk but my mobo does
A little info:
Cpu: Ryzen 5 7600
Gpu: rtx 7900 xt
Ram: ddr5 ram 32 gb
My pc was first turned on November the 12th, not sure if that’s still considered new. Up until this point I was using mobo ports. But I recently did the switch from 60 hz to 144hz so I needed to use the gpu ports (plus I didn’t know I was supposed to use them lol) but the ports don’t work on my gpu, but when the cords are in the mobo it’s just fine
there are plenty of reasons why the gpu is not working even after doing the suggestions in the video. This might have something t o do with your psu or at least the gpu is not receiving enough power to run itself therefore the mobo is not detecting it as main display.
may i know what is your psu model and if you have plugged the pcie power cable for the gpu th-cam.com/users/shorts9N_5YmJRHko
I just went through blood and sweat because it wouldn't post and had a long beep and three short beeps. I did what you showed me, taking off all power sources, pressing the power button, and taking my monitor down to the level of my PC. I even disconnected my monitor. AND then it freaking works! as if my monitor restarted at that moment! thank you and thank God.
glad it good now bro!
@@syafster mine take long to make beeb sound and still not working
@@MacCoyzkiebeep sound
You saved my day, I was looking for a new GPU to play GTA v, and it did not show any display, but when I completed your first method it worked, you're the best❤️
Glad I could help! you're welcome
Gta 5 is like 15 years old lol
@@littleoldmanboy Dawg what are you talking about gta 5 is only 10 years old
@@littleoldmanboy so what? There are much older games people like to play
You saved me from a headache, I did suggestions 2 and it worked perfectly 🙏
awesome! glad it worked!
It was a new pc? I just got a new mount the gpu and doesn't work everything is on tho, no signal..should I try option 2 even if is a brand new pc?
@@DchiIl so what did you do? Lemme know my new pc happening the same stuff not opening when I plug hdmi on GPU but opens when I plug on motherboard
@abhishekrawat2164 I didn't plug in the gpu cable lol..I was scared to break it, you need to push really hard in to get it all the way I
its worked, thank you so much
No display gang with no graphic chipset what up !
It works like a charm after the second guide!! Shocked for a bit because it didn't work but found out I was dumb enough to not connect the GPU cable back again haha. Anyway, thanks for your kind guide, sir!!
awesome! no problem bro
Wow, I actually didn't expect that this would solve my issue, but somehow it did... Wasted several hours off removing and adding hardware, resetting CMOS, uninstalling Nvidia drivers etc... Ugh
Which thing u did
@@third181 I did what was mentioned in this video and that was the only thing that worked
@@professor_meowington which one?? There were 2 choices..
This creator is the goat
@@tsuki3003 Why not just do both? Maybe the first one will be enough? I'm pretty sure i tried both but it was the second one that worked for me, removing the integrated graphics driver (2).
TO THOSE SEEKING HELP WITH GPU DETECTION ISSUES AND HAD A PREVIOUS CARD AND OR WAS USING INTERGRATED GRAPHICS UNTIL THEIR CARD CAME.... CLEAR YOUR CMOS VIA YOUR JUMPER WITH A SCREW DRIVER OR PULL THE CMOS BATTERY. MAKE SURE TO REMOVE YOUR HDMI FROM MOTHERBOARD AND PLUG IN YOUR DISPLAY PORT CABLE AND HDMI IF U HAVE DUAL MONITORS. DO THIS WHILE PC IS OFF AND PLUG PULLED AND GPU INSTALLED READY TO GO. START SYSTEM AFTER CLEARING CMOS AND BOOM HEADSHOT!!!YOUR BIOS WAS HOLDING YOUR NEW GPU HOSTAGE , from there you go to windows update and it will install your Nvidia display driver(basic) then update your driver's from website of Nvidia, also it doesn't hurt to have CCLEANER and clean your registry with it and run a custom clean. When updating drivers u downloaded do a fresh install. Your welcome. This video is legit and works for the cases mentioned . Thanks buddy
glad it was helpful :) thank you too for sharing
I’m scared to take the CMOS battery out 😭
How to I clear my CMOS? I have no idea what that means😭
@@selmarehman9534 Your cmos is what stores your Bios settings. Just like an alarm clock would keep time and alarms when the power goes out when having batteries installed. So by removing that watch looking battery that is usually placed somewhere on the front of the motherboard it resets so that incase a setting is preventing the motherboard from booting you are able to clear it by removing and installing it right back after 30 secs or so. Hope this helps.
@@nah6781 thank you for answering. I did remove it but nothing helped. It still shows “no display”. I think Ima get a new graphics card cuz nothings working
This helped!… somehow haha. I did so much research thinking my 3080 ti was just junk but after installing the drivers while my old GPU was in (1080 ti) then following your first steps, it worked. I guess taking out the CMOS battery did the trick but who knows. Thank you for the vid!
awesome! no problem bro
Hi Richard, I'm have the same issue and same upgrade from 1080ti to 3080.
I have i7 4790k
And PSU Corsair cx750m
It displays on my on board graphics but no display on the GPU.
Was wondering what PSU you have..
@@WrightStrenghtandAgility so did you manage to fix it? Same setup and issue here. 3080 TUF
1st option worked like a charm. Thanks a lot for step by step guidance
You're welcome!
So happy I found this.Thank You !! I got GPU display now, but just want to add two tips that may help others. On my MB the BIOS battery is under the GPU, so BIOS reset must be done when the GPU is removed. At first I did not get a display with the HDMI cable. I then tried with the D-Sub (VGA) cable and it worked!
Glad i could help! 😀👍Thanks for sharing too
So your gpu wasn’t working because of the hdmi cable or the hdmi port in your gpu?
Thank you so very much, Mac! The 2nd step with uninstalling the iGPU worked like a miracle. I was going to return the entire pc setup as it was bothering me so much! Appreciate what you have tried and tested to resolve this issue!
no problem bro, glad it worked for you 👍👍
I have no idea who you are , how you look like , what you did and what you will do but thank you and i love you
I was trying to fix the problem for 2 hours until i try your method thinking “this is probably not gonna work and my gpu is probably dead” AND THEN IT FREAKING WORKED AND ALL MY RELIEF GOT RESTORED
glad it worked bro! no problem at all
AFTER 2 hours THANK GOD. BEEN TRYING TO INSTALL MY NEW GPU FOR HOURS AND THIS HELPED ME FINALLY GET IT ALL DONE. THANK YOU SIR
you're welcome bro!
i literally ordered a new gpu bc i thought my old one didn’t work and this fixed my new one so i spent $217 on a card for no reason, i mean it was an update but anyways thanks so much man! this worked great :)
no problem bro, you can still sell the old or new one if ever, gpu nowadays are too expensive so you might be able to sell it easily
@@MacCoyzkie lol i bought a 1050ti and had like a 650 ti and it was probably super shit so i just have the 650 listed right now for like $20.
Thanks, removed the bios battery, 5 minutes later, all worked out.
You're welcome bro!
It s help me
😭😭😭😭
I actually love you some much right now. I was starting to get pissed of at these form sites offering no help.
im glad it worked for you
I have no enough words to thank you I bought a new gpu and removed the battery and worked , i love you
glad it worked bro!
Still work! Tried it on an older pc and now my GPU shows up. I hope more people will find this video
awesome! i hope so too
Which one did you do?
I can’t quite remember, I recommend doing all of them as it won’t hurt to
Thank you so much for this. I had no idea about the battery.
If none of these methods help try reseating your RAM that did the trick for me! Cool video
+1 here
I just bought new gpu and It was not giving display for straight 3hrs, but now It's working perfectly. Tysmm!
hopefully its all going well
@@MacCoyzkie yes it is
Thank you so much! I was so desperate and about to return my gpu thinking it was the gpu's fault. I did the second one and it works like charm. Thank you oh thank you!
Glad it helped!
hey bro pls help my computer is showing display on igpu but when i plug in my gpu the computer fans are spinning even gpu fan spin for some second then stop and i am not getting any display as well as my mouse and keyboard lights are not showing , as i remove gpu everything runs fine can u tell me whats the problem its psu or gpu fault???
if you tried the suggestion in video and didn't work this might be a broken gpu, have your gpu tested in a different pc to double check
have you find the solution?
@MacCoyzkie I've tried 5 gpus I know work and none show signal aswell (new motherboard aswell) the only thing that shows signal is the motherboard and none of the suggestions work
Thank you so much for this! You earned a new sub
You’re welcome and thanks for the subbed too 😊👍
The second solution of uninstalling the built-in driver worked for me! Thanks!
awesome! you're welcome bro
Hey man we just did the 2nd step of your video and it worked thank you!!! We were on this for like 4 hours thank you thank you thank you!!!!
you're welcome bro
DUDE THANK YOU SO MUCH, MY PC HAD NO DISPLAY, AND I WATCH UR VIDEO, IT WORKED, TYSM BRO GOD BLESS YOU
glad it worked for you bro! you're welcome
thank you so much, I thought I had tried everything and was ready to take my PC to a shop I decided to give it one more shot after watching your video and its now back up and running
glad the video was helpful! :D
Thanks it worked i just got a gtx 750ti and there was no signal but after doing the 1st step it worked thanks a lot ❤❤❤
awesome! no problem bro
Yup, this is the one that did it. This guide is also good for high end gpu’s that default to the onboard graphics on pc builds. Thank you.
no problem bro! thanks for the feedback
Which one worked for you?
Bro should be on the kendrick album
Cause he a savior fr
😄
Thank you so much!!! I did the 2nd suggestion first since i couldn't get the gpu back out (just had power disconnected) and it worked!!
glad it worked!
STEP 1 DID THE TRICK!!! I never been so hype before. Thanks a lot, you legit saved my stress levels
glad i can help bro! you're welcome
It is work for old pc??
Mobo:Intel G31
Cpu:Intel Dual Core
Gpu:gt 210
Edit:
Mine actually dont work cuz like this...
My HDD is from 3 PC's (one HDD for 3 pc's) cuz all that pc had broke down, so the drivers that installed on the Hdd maybe a lot. But I had clean it. By time that I installed the gt 210 gpu, it worked and after that one of my regular use pc had an error so I use it for the broke pc to make backups. After that I installed back to my working pc and my gpu is not working. My pc keep restarting. It restart when on windows 7 logo. I go into safe mode and uninstall the gpu driver and the standard vga adapter appear. When I boot from standard vga adapter driver it worked but not for my gpu... Plizz sir help me
Broo, i love u! I thought i was gonna lose my rx 5700 xt. Thank you very much!
you're welcome :)
I want to use da integrated gpu, but it doesnt output any Signal cuz I used a gpu before, what to do?
that's normal like i said in the video. why not just use the other ports in your gpu?
@@MacCoyzkie its a gt 630, its weaker than the one on asus' prime a320hm
@@tdm3bros if your cpu supports integrated graphics you can go to bios and enable it, some motherboard may not allow it though so go and check if your mobo supports it
2nd method worked. You are a lifesaver bro
glad it worked! no problem bro
My PC and GPU was running fine. Yesterday it turn off automatically while booting and it never turned on. I pressed the power button several times but no luck. Then I unplugged the GPU and my PC instantly booted when I pressed the power button. Now my PC is running on iGPU. Please help, What should I do? I have an Radeon HD 5670 :(
have you tried the solutions in the video yet?
@@MacCoyzkie Yes No luck
@@quietkid52 can you ask a friend with compatible pc to try the gpu. Perhaps it’s either faulty or incompatible in your build.
Though it’s rare but it could happen
What happens if you dont wait 5 minutes
removing the cmos battery will have a hard reset on bios, don't wait it won't reset anything
The CMOS battery thing did the trick perfectly! Thank you so much!
awesome! you're welcome bro!
Just a FYI: I tried this last night using my Asus Prime A320M-K + R5 1600x + GTX1070 + 24gbRAM, and if you really want the result from method #1, then you should:
Steps:
1. Remove the RAM
2. Remove the CMOS Battery
3. Remove the GPU
4. Unplug your computer from electricity
5. Drain your computer by pressing the power button for 5-10 seconds.
6. Wait for atleast 5 minutes.
7. Plug in everything you've removed recently and test it.
If some made it, great job on troubleshooting it on your own.
Hi bro, thanks a lot for this info. you help me on my problem today. This is my first time to buy a new GPU and this is what happened to me. Im sweating a lot and dont know what to do, until i watched your video and resolve my problem. I already thinking if i need to return my GPU to the shop where i bought, and tadahh.. it works very fine now. thanks on your very helpful tips. :)
glad it worked bro! you're most welcome
Bro you just saved me from buying a new gpu. You don't know how happy I was when it worked. Thank.you so much man.
Glad I could help! you're welcome bro!
Thankyou so much! You have helped me alot! 😭
Permanent subscribe for you 👍
You're Welcome 👍 Thanks for the subbed!
Removing the battery worked for me as well, after 5 hours this worked :)
Really 😂
nice!
@@Apomli I should clarify I meant to say after 5 hours of trying to fix it with different methods the battery method worked
Thanks dude. The first one did not help but the second method worked.
glad it worked! no problem bro
FOR CLEANING PC I REMOVE GRAPHIC CARD AND WHEN I CONNECT HDMI TO IT THEN IT DOESNT SHOW ANYTHING DOES IT WILL WORK
might just be loose psu cables or gpu was not plugged in all the way. I suggest double check the ram sticks as well since pc won't boot at all without it
@@MacCoyzkie but my fan is spinning
@@pranaybhagat5373 did you have any power fluctuation in your house lately? if so then that is a power outlet problem. If not then this might be a failing psu, it doesn't mean your fans are spinning and lights are on means your psu is giving enough juice for your entire system. I suggest use Avr or ups if you have any or at least borrow from someone you know to confirm the theory
no now it has been fixed I have not inserted graphic card properly thank brother for your help
@@pranaybhagat5373 awesome! no problem bro
i was about to spend my pocket money to repair my graphic card, then this legend showed up💙
Saved me on my son’s build thank you. Secondary part worked a charm. Sat there blank for a few minutes then the display came alive. Wheeeew
glad it worked
It took a few minutes for the display to come back?
bro I'm working on my pcs for about 32 hours, i forgot to add ram to the 2nd pc, and wasn't showing display.
I will be thankful forever.
Thank you!
you're welcome bro! :D
didnt expect to see someone like noted here LMAO
i love ur vids!!
@@Aisubanira oh shoot he is popular lol
God bless you man. I was freaking out.
The first option worked for me
glad it worked bro
@@MacCoyzkie bro can u look on my problem
Well first my spec
I5 10400
16gb ram
Msi b560m pro
Intel uhd 630
As i got a new gt 710 gddr3 my hdmi port works for a sec then the screen black out
Vga is working properly but low quality
And i have only old driver it is a fermi card btw version 391.35
Pls help me
@@arcticyt0219 normally happens if you haven't updated the driver, update the driver bro
@@MacCoyzkie i think i solved it myself bro
Man, you really are a life saver.
you're welcome bro!
I gave up on my GPU since a year and today I thought to check if it still works and it didn’t and now when I tried your first method, it worked flawlessly 😍
Thank you so much man!
wow after a year! no problem bro, you're welcome
The issue i previously had (still do but neglecting it) was on my laptop. its gtx 1650 keep disappearing. Ive tried every possible method to fix, clean uninstall drivers, os, and even rechanging thermal paste but to no avail. What do you recommend, sir Mac? Should I have this one check for hardware issue? Thanks!
back up all important files and do a clean windows installation, if that still doesn't work try the ultimate ram cleaning in this video th-cam.com/video/F-dLBIomghY/w-d-xo.html which i guess you already have. I also think it is a hardware issue more likely the motherboard since it is failing to detect the gpu
I am experiencing the no display on my dell xps8300 after installing an AMD rx550 gpu. Tried both methods and both unsuccessful. Any assistance would be appreciated. Tx
your psu cannot run the gpu, you might need to replace that also
@MacCoyzkie superfast response, tx mate. Took it to my local tech shop and apparently amd cards does not work on non UEFI compliant devices....
Total power is 460w max
@@Exodia_BTC usually those built-in psus from prebuild dell pc are not design to run with a gpu. you might need to get a new one
dude brand new pc and 4090 wouldnt work at all... this worked so far your amazing bro..
wow monster build! glad it worked bro
Thx a lot Mann you saved me a lot of time 😌
you're welcome bro!
Ok what was stupid was that I just need to but the cable to the gpu not the io part but great video btw
and at times we panic for simple reasons. thanks for the feedback bro
When I put the display cable in the motherboard it shows display, but if I put it in the gpu, it says "input not support"
use the motherboard port first, then uninstall the igpu driver. shut it down and try to do the 2nd fix in this video
Just want to say this, if this doesn’t work the windows restore from save point seems to fix it as well. It can be an absolute heaven sent miracle or it could be an actual fix
this one!
2nd step is worked like a charm. Thanks
awesome! no problem bro
Thanks man you saved me a headache, I used the first method but I have a mini atx motherboard with 2 gpu slots and couldn’t reach the battery while the gpu is plugged in so I took out the battery then plugged in the gpu then after 5 minutes took out the gpu again and put in the battery then put In the gpu and it worked with all other steps thanks so much.
good to hear your pc works now, you're welcome bro!
wait what? it actually worked! ive been stocking my old gpu cause i thought it was broken but i now i tried your method and miracle happend!
awesome!
00:55 when you drink too much coffee.
hahaha! yeah i just had coffee that time :D
Only video that helped my situation Ty!
You're honestly the best! 1st method worked for me.
glad it worked
will intel HD61H0 work with gtx 1650?
it might work but i think it's counter productive
@@MacCoyzkie actually its not working, im trying to look for alternative mobo. is Asrock H61M-HVS 1155 good for gtx 1650 gddr6?
@@acepleno1660 performance wise it is the same but it will still work
Awesome video! I was actually using safe boot to pretty much do step 2 because old intel hd kept trying to take priority and I could disable it there. Step 1 trick worked great, I rushed a bit my first try taking the battery out and it didn't work but then I tried actually listening to removing the battery for five min lol worked perfect! Multiple restarts and no problems with 1050 taking priority now :D
Glad it worked bro! thanks for sharing
I found a GPU for 10 dollars, it's not working, and I'm currently trying to build the cheapest PC I could, and this video helped me so much
you're welcome bro! steal price gpu! nice!
Thank you so much brother , i had a random power cut on my desktop computer and solution 1 worked for me
My gpu wasn't even getting power .. All fixed now
@@JuanDonBeatsZA awesome! that's good news then bro
MY GOAT, First method worked for me!!! 2 nights of stress solved
glad it worked
Thanks a lot! The first step worked!
no problem
Damn man! I want to scream all profanities I know of just to express my gratitude!!! A single like will never suffice! Thank you so much, bro!!! 💜💜💜
a simple comment, like and subbed is more than enough bro. glad it worked for you
It worked!!!! THANK YOU!!!! Somehow I disabled the monitor output in my BIOS by pressing the wrong boot key and could NOT find out what button to enable it again. I also couldn’t get into the BIOS menu…
Go figure I got a windows update as soon as it started working again
@@UnOrthodox_Christian no problem bro! glad its all good now
CMOS reset worked for me. Thanks mate, you're a lifesaver!
no problem bro
Bro I have a problem I have 2 GPU one is working but if I install second GPU no display after PC show home screen
that's bad news bro, it might already be faulty but have the non working gpu tested in a different rig to confirm
Hey so your probably here running into the same problem as me haven't found the answer, well F*** the gatekpeers If your connected to a gaming laptop to a monitor the simple solution would be to buy a belkin USB C HUB it will now connect to your dedicated graphics instead of your integrated.
When connecting a gaming laptop to a monitor, it's frustrating to deal with defaulting to integrated graphics. One solution is getting a USB-C hub like u mentioned, which can help route display output through the dedicated graphics card, gaming performance might not be good though. I haven't tried belkin but i tried this one already th-cam.com/video/L8VsyoD1FLQ/w-d-xo.html and works very well. Just make sure to check compatibility before buying. Alternatively, some laptops offer manual graphics switching options in settings.
Dude. You have no idea. My country is in a shithole and I can’t afford another gpu. Thank god your video worked
glad it worked bro! you're most welcome
Why mine doesn’t give me any intel or amd 2:, mine just microsoft basic display adapter. Should I uninstall that? 1:52
what's your cpu model name?
Oh my god bro thank you doo much its my first time building a pc and i was soo nervous and sacred since im not very rich yk i cant buy another part since i already have spent all of my money thank you so much it helped me may god bless you brother
No problem bro, glad it worked out!
you are my savior, for me i had to remove cmos battery. You are the best
glad it worked bro
Thanks it's worked out.. But when I connect more than one GPU, getting the same issue
wait.. you why do you need more gpu? anyway to answer your question, that might be driver conflict issue or at least your motherboard does not support more gpus
@@MacCoyzkie oh ok... Thanks
Mac my friend you are a legend. Second method was it for me
glad it worked bro!
I dont understand how the batter thing can fix the issue. In any case none of the solutions worked for me sadly. My graphics card suddenly became undetectable by the bios, while I was in the middle of playing Elden Ring. The display monitor just lost signal, became black and I had to restart the PC. To no avail, whatever I do, it's like the graphics card no longer sits on the motherboard.
This is so weird, since I have not pushed, bumped or move the PC at all. Everything was working fine for 8 years, then suddenly, in the middle of gaming, boom, graphics card goes MIA.
I will have it tested in a repair shop tomorrow, to see if it just died out of nowhere. This makes me sadder than when I broke up with my ex, no kidding. I loved my Nvidia Geforce GTX 980 Ti 6gb so much... It brought me so much happiness and never asked anything in return.
sorry to hear that bro, if there is anything i hope its just a psu problem not gpu. usually there will be glitches like in this video th-cam.com/video/U_2qRkkf-oM/w-d-xo.html if your gpu is dead. i hope the test have a positive result
First method worked. Thank you bro.
glad it does! no problem bro
GOD SENT BROTHER THANK YOU SO SO MUCH I CANT EVEN BELIEVE IT WORKED IM SCREAMING INSIDE NOW YOU GOT A NEW SUB! ❤❤❤
no problem bro! glad it worked
i have yestron rx560 4gb,the issue is my gpu has no display output already tried different plugin wire hdmi, dvi and dp vga cable but still no display but one thing for sure my gpu still work there is a sound which is start up sound you what ii mean right? any help!?
Thank you very much. Exactly explain every step it was easy and solved my problem, thank you :)
you're welcome
Awesome thanks man solution 1 worked for me… was driving me nuts trying to figure it out after a 9020 optiplex upgrade psu and gpu since all had power
no problem bro
Thank you for your help even worked with HP workstation saved me allot of time man thank you
Glad I could help
Brother in christ, it worked, good lord. Since yesterday im trying every possible thing and this worked, thank you so much!!!!
No problem bro! glad it worked
Who knew this video was here, thank you for the vid helped me fix my PC, very helpful!
glad it worked for you bro
Thank a lot , removing the mb battery really did it for me, man you bring me back to life❤
glad it worked! no problem bro
It works for me pc as well 🙂
@@sahibsingh1855 awesome!
Hey removing cmos - it worked 👍.
Thanks man
Glad it helped! you're welcome bro!
First video I found that worked. Thanks!!
awesome! you're welcome bro
Thank you so much bro , you saved my money . CMOS method did the job 👍. But on every start after shutdown need to remove CMOS battery for few sec for getting proper start with display . You know any solution?
cmos battery might already be depleted, take the cmos battery out and buy a new one with the exact model
@@MacCoyzkie but working fine without graphics card
@@han.9.598 can you try your gpu with a different pc, ask a friend if you don't have extra at home and see if the results are the same? if it is then the gpu might be the problem
@@MacCoyzkie i tried 2 same model GPU and same problem
@@han.9.598 can you tell me your pc specs?
My brand new pc. With a brand new card, everything is installed including drivers. It doesn't show up in device hardware, but it recognizes in on control center and even said my exact card on the screen. Little confused
did you plug the monitor hdmi/dp in the gpu port?
@@MacCoyzkie LMAO I literally fixed it an hour ago doing this. Thank you man. You're the goat. Subscribing just for that correct answer.
My problem was that I had monitor in mb. And HDMI in card.
@@MacCoyzkie first build BTW
@@RavanaMuse no problem, it happened to be too back then 😂