RouterBase Installation - Bosch RA1181 RA1165
ฝัง
- เผยแพร่เมื่อ 3 ม.ค. 2017
- Showing how to install and use the Bosch RA1165 Router Base in a RA1181 Router Table.
Always make sure to release the lever before trying to use the fine adjustment of the Router height!
Otherwise you might damage the adjustment-mechanism. - แนวปฏิบัติและการใช้ชีวิต
![[4K] BABYMONSTER(베이비몬스터) “FOREVER” Band LIVE Concert “영원히” 베몬만을 사랑하게 되…💗 [it’s KPOP LIVE 잇츠라이브]](http://i.ytimg.com/vi/TQfC0xdpiw4/mqdefault.jpg)
Thank you so much!!! Going back in the garage to redo the installation the right way!
THANKS SO MUCH!!! I was making myself crazy trying to figure out the fine adjustment. Thanks
Jesus Christ, Thanks! I couldn't figure out why the fine height adjustment wasn't working. I didn't pull the router down to re-engage the release lever like at 3:11
Me too almost kill my fine tuning...
I think I broke it. Damnit.
Nice! Just what I needed.
yOUR VIDEO WAS REALLY HELPFUL! tHANKS
Very helpful! Thank you!
Thank you, thank you. Very good tutorial
Thank you so much for this.
Thanks for posting!
Also worth mentioning that this mount uses larger bolts to mount the base.
Has anyone had trouble getting their Bosch router into the base? Mine is SUCH a tight fit and seems to get stuck every other time. Super frustrating.
which boosch router motor will fit it?
tq
I was wondering how the lift mechanism is attaching to the router, I saw it clearly. Thanks
Will a dewalt 618 fit with this base?
Hi, Do you know what third-party milling machine can be fits to Bosch RA1165? Like some of Makita routers or DeWalt routers?
Thank you very much!
Very helpful. Thank you
this base RA1165 , IS IT A UNIVERSAL PIECE...i have a portercable wr ...can you answer
My router kit came with the fixed and plunge bases, but there were not extra screws for mounting underneath to the Bosch plate.
What sizes are the screws that are needed?
Are they countersink or pan head screws?
Thanks
Ich hätte gerne ein RA-1181 - woher hast Du Deins? Ich habe auch ein GMF-1600 und will es unbedingt in einem Tisch montieren. Danke und Gruss, Rob in der Schweiz
I live in Europe and this model of the milling machine is not available here. You can buy it in the USA but there is a problem, in the USA it is 120V and in Europe 230V. I heard that there were also 220V models of this milling machine in the USA, but I can't find anything on the internet.
is that sold separately? i got my table but dont have the bracket to make the depth adjustment. i only have the plat to connect the router to the table
Yes, this is a separate component
Can u lock the On buttons and use an external On Off switch ? I know it has some ptotection stuff.
Yes, you can.
My Bosch router table has an external switch built in.
Is it compatible with a Bosch Gof 1600? Thank you
There is a similar one for the GOF1600, that has the built in low voltage interface. In some countries it's called the GKF1600. It's not very good, but there are no other out of the box solutions. I'm sure you probably know this by now, but in case anyone else comes along.
Are those 3/4” screws M4? Mine didn’t come with screws. Thanks!
The base comes with two sets of screws.
The three 3/4” screws are 10-24.
The four 20mm screws are M4.
The base comes with two sets of screws.
The three 3/4” screws are 10-24.
The four 20mm screws are M4.
@@MegaSafetyFirst Thanks! my bosch 1617EVS router came with 3/8" screws which weren't long enough for the bosch 1181 table. pulled right out..how annoying
this base with another bramd or I can only with bosch router
+Angel Matos I think it only works with Bosch routers.
What Router model is that?
It's the Bosch 1617
Thanks. I thought I had that model but I was not sure as I leave it assembled. It's a really nice router. For smaller jobs I use a Rigid model 111. I have to finish assembling my router table though.
Thank you 4 the warning. No Bosch
I've had this base for 4 or 5 years now.. i find the fine adjustment stupid - having to disengage/re-engage the big lever/clamp is both a pain and also often screws up the "fine" adjustment you just made. Very disappointed in Bosch for this crap.
yeah its a terrible design. I haev the exact same problem. It's also not a sturdy enough design to really "lift" the router. It struggles with the mass of some of the bigger ones. Also very disappointed with this
I just got mine - it flat out doesnt work. My old router broke and I was hoping to be able to get this new one and finish a batch of wooden mallets to give people as Christmas presents, nope now I have to return this router, the fine height adjustment doesn't work at all, and im a very handy guy, ive tried everything and the fine adjustment just spins freely.
Pain in the ass trying to get that router into the base, had I knew this I would not have spent $350+ for this router and the table, really poor design
Money thrown in the wind! Almost 2 years ago I bought one (GMF 1600 which includes GOF 1600 router and two router bases) from Amazon, and RA1165 DOES NOT WORK from day one!! When you try to set the position screw, it pulls (or pushes..) just one side of the router, and the other stucks in the base and it does not move at all. Very poor manufacturing and extremely bad construction. Do not buy!!
That's probably you're not releasing the big clamp/lever.. totally understandable that you didn't, but that's why. See my comment further up, this is a stupid router base for that reason
@@NeverBeenThereBefore - unfortunately, you're wrong. I did it all by the book, but the router just does not slide through the base...
@@satman1w Yeah I have the same issue. It isn't sturdy enough to really lift the 1600. It's too heavy and is kind of lopsided. When I'm lifing, I reach under the table and give it a push on the bottom with my spare hand. Kind of defeats the purpose of above table adjustment.
@@andrewford80 / thank you Andrew, so they've cheated more people, not just me :-D
I'll definitely go for something like woodpeckers PRL V2, but it has to be ordered directly from USA and original price of 400 USD will grow to at least 800 when it will arrive to my workshop.... sad but true...
3:00….. VERY poor design. You can see by his breathing that it takes effort…. Good luck if you are 60…..