It's gotta be cheap before it can get expensive. If it's not to known a brand it has to be cheap the more it sells and gets good rating later down the road. They will be pricey
Funnily enough, I have this same box and sub setup on a Smart3 wired to 1 ohm... It really slams and these subs can really move.... A lot more than they are in this video
I have two of these in my blazer on one razor amp and a box tuned to 32 hurtz and it shakes my whole car the steering wheel my dash and doors flex great video brother love em keep it coming
It’s pretty astonishing. I’ve been telling people about these subs and how they are actually pretty decent and you are just proving with tests I couldn’t perform! Thank you!
I'd love to see 4 of these in maybe 2 prefab boxes that are the same both amps wired to 1 ohm. Stack the boxes on top of one another. Would be awesome!
That's crazy, I had 1 12" Sony Xplode with the black cone, and an infinity 600w amp installed in a 03 Alero and hit 138db. I think vehicle placement also plays a part in the sound levels
@@randyman78596 yeah the infinity reference amp I had was too much for one sub but I tuned it pretty good. It had plenty of power and actually sounded clean. Of course I used 1" mdf for the box so it was quite heavy
Those subs in the correct enclosure are crazy!!! I biult a custom 5 cubic foot vented center console in my Dodge Power Wagon with 2 of those subs and a skar 2000W Mono Amp. Subs and port are facing up. Tuned to 30hz..... Probably the best sounding subs for the money I've heard yet! I may try and down fire them before adding details to the console itself. See what sounds better. If i keep them firing upward I may add 2 more and isobaric them together. Maybe that's pointless with these subwoofers but for the price 🤔 I'll probably end up trying it lol
I ended up swapping them out for a deal on a pair of P3 12s... I did a new console thats downfiring with the p3s. So far I say downfiring is the way to go in a truck cab... I do have the p3s running off of 4 of those power acoustic amplifiers though. So each coil has its own amplifier and seeing 450rms at 4ohms per. Clean af 👌
I just watched the last video with 2 subs wired to amp at 1 ohm & the spl score is close to the same with 2 amps wired down at 2 ohms each. Like the videos u make, very informative ✌️
Same wattage same spl. You have to double come area or double wattage to gain 3db. If he had two Amps that put out the same wattage as the first amp did at 1ohm. He would have gained the 3db. Nothing changed. A doubling of power or cone area will result in 3db. 9 db gain is the double of loudness. Either way I'm digging this.
I like amps wired at 2 ohms. Better dampening factor. Less work the amp has to do to resist the voltage coming back from the coils. Tighter cone control better sounding bass.
I have a pretty similar story. I had the same amps. And a single dual 4 ohm Rockville k9 12. I just bought the amp because i didn't have the money to buy a better one at the time. I was so impressed with it with the sub wired down to 2 ohms, i bought another one and wired each coil with its own amp. I knew that there would be less power per amp, being 4 ohms instead of 2 but I assumed it would work the amps less hard and might gain some spl from it, as well as quality. I can tell you that its louder and cleaner with a single amp. These amps really just love low impedance i think. So eventually I'll order a second k9 d4 and be pounding. Just for a little background, it is an sq system. I used all high-end 8 ohm drivers to replace the factory speakers, and a class a/b kicker 4ch. Amp. Can't stress how important it is to use class a/b for mids/highs. I know there are really fancy class d amps that will do high-fidelity like a class a/b, but for what i can afford I'll do class a/b. Class d is fine for bass but..........
Wow 🤩 ! Nice video,if I win the ct sounds il put it on my 18 inch skar audio zv subwoofer,and the money I would put gas to cruise around and bump and enjoy my American 🇺🇸 freedom! God bless y’all!
Great videos. Very informative and have been a subscriber for some time. To all the new subscribers welcome and if these videos are your first time watching Parker do his thing. Y’all are in for a treat. This man here is extremely professional and knowledgeable. I just wanted to comment and give my support. Keep up the amazing work that you do. I will be waiting for the next video soon.
Ran mine on 1 ohm on a Kicker CompR 12, blew both the fuses after 10 minutes and after jumping them smoked the kicker after 5. I've tried three of the Power Acostik subs and they all blew within a week, finally bought myself some Skar Audio subs and amps and couldn't be happier.
From my understanding, on paper at least, you have to add 10x as much power or 10x as many drivers to double volume (10db gain). Doubling the number of drivers or doubling output power will give about a 3db gain which some regard to be around the smallest volume difference the average human ear can detect. Just in case anyone is curious and this doesn't really hold up in the real world, just some approximations with other variables removed. Good video. I am really enjoying this series. I would be interested in seeing some other subs tested in the same way, maybe different amps as well but I think it would be interesting to see different price ranged subs benchmarked on the same setup. Just a thought.
But if you think about it Parker, you're giving equal power to each sub. I'm not saying that that's better by any means for gain on db, but for the long haul the way you have them setup now, could give them a longer life. Like most of us, I love extreme bass. But there are some that this setup would be absolutely bomb an perfect for. I have one of these subs sitting around that I wanna put in the car for my wife, I've just been trying to find the right amp for it. Deeply appreciate you taking the time an money to show that you don't always have to spend big money for some good bump! Thanks Parker, you're doing a great service!! Can't wait to see the 4 12 setup!
I love ur Walmart gear series !! Bad ass they also sell soche brand 12 inch single sealed speaker box that u assemble urself for like 35 bux each they are 1.125 cube and are actually decent.
Would like to db reading of this setup in a sedan. Pickup's and SUV's and Hatch's are always going to be louder. But I'm literally impressed by this...Walmart didn't have these in late 90s early 2000s, yea I'm old
Cannot Wait to see the 4 sub wall. My first big build when I was 18 was 4 rf hx2 12s on a power rf 1000 in a sealed box my dad and I built . Was such a fun thing to do and that shit bumped ina gel tracker ! Let’s goooooooo
Another one of those boxes and 2 more of those subs would give you the opportunity to wire both amps back down to 1ohm. It would sound amazing stacked.
Man I’ve always seen these duals In Walmart I kinda want to test it in my truck I love you’re videos !! Really in depth and step by step because of you I might run some 6.5 CT SOUNDS MESO just need to find a box for them
wasn’t expecting that at all with a second amp. Rise is a thief lol. Now I think the next step should be build a custom box for those two subs and run the testing again! The skar prefab is decent at that power level but I’m curious to see how much difference a custom box would make! Really cool series and Im enjoying it!
also those amps arent stable at 1 ohm. they consistantly blow the 25amp fuses. everyone replaces the 25amp fuse witha 30 and the insides of the amp get stupid hot. definitely not 1 ohm stable from my experience.
Your results are proof. adding the other amp gave you higher db what if you test again with one amp but use the power from both amps on the one to see if it's a input supply from the CCA resistance. I've run two amps on a dvc sub had same results sounded louder with two amps but the input watts was 10% less with two amps while the output watts was kept the same. i wish i would've tested each amp independently now to see if it was a component tolerance issue.
I know a guy that has 4 of these Power Acoustic subs and it's had me tempted on buying 4 of them for my Honda. What I want to know is how they perform in a big, low HZ tuned box. Maybe put your two into a box with an areo port and play with the tuning of the box for a video to explain on T/S specs and how different subs want different boxes and tuning.
Dang man . I subbed a while back when u had like 3k subs and havent been back in a while and ur channel has exploded along with the quality and entertainment value as well . Doing good bro keep it commin.
We needed this. I almost went that way when I built a system in 2020 but I discovered rockville when they were in a lawsuit so I got the subs cheap with matching amps
I love this series I keep telling people about Walmart for the budget win I was running 2 6.5 Pyle subs on a Dual 2 channel shocked a bunch of people good job Park👍
Parker good video thank you for your time bud. Impedance rise is killing the power you are getting at the woofer, but you're thinking ahead to 4 woofers. Would you do a video in this series to educate your fans about impedance rise thx.
I've been running a power acoustic mofo 152x for over a year . It bangs hard. I am using a powerbass xma-1205d amplifier, which is much better than power acoustic though...
Exact same amp I use. But, I took off the back cover and put a fan on it. Hasn't tripped since, ran it on 1 ohm since day one, I run the absolute piss out of this amp and it put out maybe 800 watts max. Two Audiobahn AW1206T 12's wired to 1 ohm. It works and never dies (anymore).
I always appreciate the making as much as you can from a little bit. In the daily I run a single DB-10 in a box I 3d printed with custom sized aero port 3D printed as well. Metered a 138.5. I think it could burp almost a 40 if i had anything resembling decent electrical. Just too lazy to go throw in the bank of maxwell ultra caps sitting here lol Took me idk 6 generations of changes to reach that 38.5 but damn proud of it off a single 10
I got a power acoustic Amp listening to the 2 Gothics that sounded good and flexed good. I can get some cheap goths and crank the amps up some more lol
I personally use these and I find a tuned box at about 42 hz, subs forward port up has been the best in results for me. Also jl amps and these subs love each other. Definitely worth the buy for new bassheads! Thanks for this video! Keep up the good work!
Depends of the vehicle (resonate frequency of the cabin) I typically tune close to fs which for these I'd tune lower than 36 (I personally ran 4 in a box tuned to 28 and they did decent on about 2k)
@4:33 i had one of those amps and they are 2 ohm stable One channel mono block obviously, So when you were running it at 1 ohm that’s actually too low of impedance for it. The impedance now is correct. I don’t know how you were able run it at 1 ohm without it going into protect mode?
Having fun and sharing the knowledge, doesn't get any better!
Yessir!!! Thank you Big D. Excited to see what you upload today 👀
I love our community!!!
@@ParkerTheBasshead how do I get into the contest
Big D you should test those walmart amps on your dyno! 😆
Big D, wassup!!! Love that Ford!!!
love these budget builds for people who are just starting to get into car audio.
And back in to car audio like me!!!
It's very impressive how good cheap equipment has gotten
I remember the Vr3 brand at Walmart 😆 Now my Walmart sells Kicker stuff 😆😆
the first brand they carried was road gear...made the vr3 gear look nice sadly lol
Lightning audio
Pyramid amp.👍👍👍👍
It's gotta be cheap before it can get expensive. If it's not to known a brand it has to be cheap the more it sells and gets good rating later down the road. They will be pricey
I want to see just how far you can take this budget build I think it's really interesting.
Thanks man!!
Keep going with it
Next build a box, if the seats aint an issue a parallel tuned sixthorder with four of them might get slap nasty especially if you stack fab the box,😅
Funnily enough, I have this same box and sub setup on a Smart3 wired to 1 ohm... It really slams and these subs can really move.... A lot more than they are in this video
I have two of these in my blazer on one razor amp and a box tuned to 32 hurtz and it shakes my whole car the steering wheel my dash and doors flex great video brother love em keep it coming
This has been a good series...I still remember the Walmart days... Lol
It’s pretty astonishing. I’ve been telling people about these subs and how they are actually pretty decent and you are just proving with tests I couldn’t perform! Thank you!
Yeah I had some gothic stuff
I have one gothic 12” and a rzr 2500 d amp in a ported bbox brand box it hits hard af!
I'd love to see 4 of these in maybe 2 prefab boxes that are the same both amps wired to 1 ohm. Stack the boxes on top of one another. Would be awesome!
.5 ohm or 2 ohm for 4 12s
I'm doing that now .
You be playing some bangers. List the songs 💪🏾
Systems like that work great for budget builds thanks Parker for your hard work
I love watching your videos❤️ born from a country that music is everything🇩🇴 one day i will buy subwoofers for my car❤️❤️❤️❤️
That's crazy, I had 1 12" Sony Xplode with the black cone, and an infinity 600w amp installed in a 03 Alero and hit 138db. I think vehicle placement also plays a part in the sound levels
I got the 2 xplodes 1200w black cone on a 1200w kicker SLAMS!
cute baby subs
@@Pinkielover I never said they were big bad subs, I also stated I "had", I'm 42yrs old and I had that setup 12yrs ago
i miss those old sony subs... had two grey cone 10's in a proper sealed ... sounded great on 500 rms, still have that amp.. sony xm1s
@@randyman78596 yeah the infinity reference amp I had was too much for one sub but I tuned it pretty good. It had plenty of power and actually sounded clean. Of course I used 1" mdf for the box so it was quite heavy
Cone area, load impedance, proper enclosure design and what physically will fit are crucial if you wanna get loud "on the cheap"
Wow I enjoyed watching this. Those Power Acoustik subs are nice!
I remember the old school Jenson blue speakers that Walmart used to sell those hit hard back in the 90's.
i have no idea how to telegram you i tried and don't think they went thru
Cool what's the package?
Cool what's the package
Those subs in the correct enclosure are crazy!!! I biult a custom 5 cubic foot vented center console in my Dodge Power Wagon with 2 of those subs and a skar 2000W Mono Amp. Subs and port are facing up. Tuned to 30hz..... Probably the best sounding subs for the money I've heard yet!
I may try and down fire them before adding details to the console itself. See what sounds better. If i keep them firing upward I may add 2 more and isobaric them together. Maybe that's pointless with these subwoofers but for the price 🤔 I'll probably end up trying it lol
isobaric is a good way to double up your install cost without giving you much volume in return! If it was worth it, you would see it a lot more.
I ended up swapping them out for a deal on a pair of P3 12s... I did a new console thats downfiring with the p3s. So far I say downfiring is the way to go in a truck cab... I do have the p3s running off of 4 of those power acoustic amplifiers though. So each coil has its own amplifier and seeing 450rms at 4ohms per. Clean af 👌
I just watched the last video with 2 subs wired to amp at 1 ohm & the spl score is close to the same with 2 amps wired down at 2 ohms each. Like the videos u make, very informative ✌️
Yeah man I was surprised at how close it was! Thank you
@@ParkerTheBasshead so wire the box to 1 ohm and hook the wires to both amps or no?
Same wattage same spl.
You have to double come area or double wattage to gain 3db. If he had two Amps that put out the same wattage as the first amp did at 1ohm. He would have gained the 3db.
Nothing changed. A doubling of power or cone area will result in 3db. 9 db gain is the double of loudness.
Either way I'm digging this.
I like amps wired at 2 ohms. Better dampening factor. Less work the amp has to do to resist the voltage coming back from the coils. Tighter cone control better sounding bass.
My man Parker is the real deal and hell yes you can. My favorite kind of systems are budget. When you build a bad ass box and it slaps
Love your videos and the fact that you actually know what you are not only saying but the fact that you are always able to do what you say
Super dope dude now you got me want to build a budget build I have been looking for easy build.. thanks
Nice job Parker, I’m sure a lot of budget minded bassheads including myself took some useful info from this video.
Awesome build. It's all about having fun.
Definitely a neat test to see what some of the budget stuff can do 👍
My buddy had 3 of those subs on a taramps 3k, they slapped hard
I have a pretty similar story. I had the same amps. And a single dual 4 ohm Rockville k9 12. I just bought the amp because i didn't have the money to buy a better one at the time. I was so impressed with it with the sub wired down to 2 ohms, i bought another one and wired each coil with its own amp. I knew that there would be less power per amp, being 4 ohms instead of 2 but I assumed it would work the amps less hard and might gain some spl from it, as well as quality. I can tell you that its louder and cleaner with a single amp. These amps really just love low impedance i think. So eventually I'll order a second k9 d4 and be pounding. Just for a little background, it is an sq system. I used all high-end 8 ohm drivers to replace the factory speakers, and a class a/b kicker 4ch. Amp. Can't stress how important it is to use class a/b for mids/highs. I know there are really fancy class d amps that will do high-fidelity like a class a/b, but for what i can afford I'll do class a/b. Class d is fine for bass but..........
Wow 🤩 !
Nice video,if I win the ct sounds il put it on my 18 inch skar audio zv subwoofer,and the money I would put gas to cruise around and bump and enjoy my American 🇺🇸 freedom!
God bless y’all!
Nice CT Sounds amp. I was born and raised in CT.
Great videos. Very informative and have been a subscriber for some time. To all the new subscribers welcome and if these videos are your first time watching Parker do his thing. Y’all are in for a treat. This man here is extremely professional and knowledgeable. I just wanted to comment and give my support. Keep up the amazing work that you do. I will be waiting for the next video soon.
Hey part 4 should be custom box VS store bought box with the same speaker and show the increase in DB.👍👍 Great video.
Just found your channel with this series, this is pretty dope tbh
69k 7 months ago to 89k now, that’s a pretty damn decent jump
Having two amps is kinda like having a buddy help you out. Everything is easier when you got a buddy helping. Lol
Nice to see a budget build video.
Ran mine on 1 ohm on a Kicker CompR 12, blew both the fuses after 10 minutes and after jumping them smoked the kicker after 5. I've tried three of the Power Acostik subs and they all blew within a week, finally bought myself some Skar Audio subs and amps and couldn't be happier.
Love these segments even though I run 2 skar with taramps . It’s so entertaining to watch . Keep up the good work
From my understanding, on paper at least, you have to add 10x as much power or 10x as many drivers to double volume (10db gain). Doubling the number of drivers or doubling output power will give about a 3db gain which some regard to be around the smallest volume difference the average human ear can detect. Just in case anyone is curious and this doesn't really hold up in the real world, just some approximations with other variables removed.
Good video. I am really enjoying this series. I would be interested in seeing some other subs tested in the same way, maybe different amps as well but I think it would be interesting to see different price ranged subs benchmarked on the same setup. Just a thought.
But if you think about it Parker, you're giving equal power to each sub. I'm not saying that that's better by any means for gain on db, but for the long haul the way you have them setup now, could give them a longer life. Like most of us, I love extreme bass. But there are some that this setup would be absolutely bomb an perfect for. I have one of these subs sitting around that I wanna put in the car for my wife, I've just been trying to find the right amp for it. Deeply appreciate you taking the time an money to show that you don't always have to spend big money for some good bump! Thanks Parker, you're doing a great service!! Can't wait to see the 4 12 setup!
I love ur Walmart gear series !! Bad ass they also sell soche brand 12 inch single sealed speaker box that u assemble urself for like 35 bux each they are 1.125 cube and are actually decent.
I definitely need to see & hear these in a custom box face up or maybe even inverted. Come on part 4 !!!
Been waiting for the next one. Glad it’s here. Keep up the good work.
Would like to db reading of this setup in a sedan. Pickup's and SUV's and Hatch's are always going to be louder.
But I'm literally impressed by this...Walmart didn't have these in late 90s early 2000s, yea I'm old
DUDE, 5:19 - 5:29 those subs are hittin!
Cannot
Wait to see the 4 sub wall. My first big build when I was 18 was 4 rf hx2 12s on a power rf 1000 in a sealed box my dad and I built . Was such a fun thing to do and that shit bumped ina gel tracker ! Let’s goooooooo
Another one of those boxes and 2 more of those subs would give you the opportunity to wire both amps back down to 1ohm. It would sound amazing stacked.
For real!! Building a box for 4 now
@@ParkerTheBasshead Nice. Can't wait to hear it.
@@ParkerTheBasshead or measure imprise and possible can wire down each amp to 0,5 ohm
Those tiny rims on that big truck are super cute. . .
Always great when parker uploads!
I really appreciate that thank you!!
Love to see a fellow bass head bumpin Terror Reid‼️
Man I’ve always seen these duals In Walmart I kinda want to test it in my truck I love you’re videos !! Really in depth and step by step because of you I might run some 6.5 CT SOUNDS MESO just need to find a box for them
They arent Duals. They are Power Acoustic
@@kjsmolik I know they aren’t duals. but I’m saying ive seen duals I wanted to try from Walmart
@@robertomartinez6417 I see
Nice video Parker! It's all about getting the most Bang for your buck. You're right, planning around impedance in important. Waiting to see what next.
You got my like for bumping some Terror Reid🔥🔥🔥 great video series!
Pop that trunk is always a fun song too 🤣
Interesting I thought about doing this same setup
Love your vids man trying to upgrade my 04 jeep grand Cherokee. New to diy audio .single dad so on a budget . Thanks for all the info
wasn’t expecting that at all with a second amp. Rise is a thief lol. Now I think the next step should be build a custom box for those two subs and run the testing again! The skar prefab is decent at that power level but I’m curious to see how much difference a custom box would make! Really cool series and Im enjoying it!
We did 4 on 4 in a blazer xtreme and a trailblazer years ago! 160+db check it out! good video bro definetly subbed.
th-cam.com/video/9s0e-i-h2Yg/w-d-xo.html
also those amps arent stable at 1 ohm. they consistantly blow the 25amp fuses. everyone replaces the 25amp fuse witha 30 and the insides of the amp get stupid hot. definitely not 1 ohm stable from my experience.
Definitely enjoying this. I know what it takes to get 3dbs.
I'm more impressed how well the budget system holds up.
Wow I love that clear bottom.
Congratulations on the subs!! 👍👍🤗 The people, not the Power acoustics😆👍👍 Keep it going dude!!
Thank you man!!
These budget builds are the best!!!
Wow. What we would of paid for this 33 years ago when I was 18 is beyond astronomical.
Yea the motor like solo x or p3
They sound great love it
I think it’s a fun concept
Your results are proof. adding the other amp gave you higher db what if you test again with one amp but use the power from both amps on the one to see if it's a input supply from the CCA resistance. I've run two amps on a dvc sub had same results sounded louder with two amps but the input watts was 10% less with two amps while the output watts was kept the same. i wish i would've tested each amp independently now to see if it was a component tolerance issue.
Hell yeah, I thought I was the only one bumping new Terror!
I know dude isn’t it dope!
Definitely! Glad you use Devilish Trio too, I've popped a few fuses and smelled my subs from their bass lines!
I know a guy that has 4 of these Power Acoustic subs and it's had me tempted on buying 4 of them for my Honda. What I want to know is how they perform in a big, low HZ tuned box. Maybe put your two into a box with an areo port and play with the tuning of the box for a video to explain on T/S specs and how different subs want different boxes and tuning.
Another good video. 👍👍
Thanks for touching on the impedance or ohm load. I see those questions asked so often.
Thanks for video of a budget build
I can’t wait to get a truck like the one in this video to be able to build a badass system In it
Dang man . I subbed a while back when u had like 3k subs and havent been back in a while and ur channel has exploded along with the quality and entertainment value as well . Doing good bro keep it commin.
Dang man you’re an OG!! I appreciate you so much
We needed this. I almost went that way when I built a system in 2020 but I discovered rockville when they were in a lawsuit so I got the subs cheap with matching amps
It's always cool to see budget builds that just work. Reminds me of my system. Except yours is not as janky. Good job!
I love this series I keep telling people about Walmart for the budget win I was running 2 6.5 Pyle subs on a Dual 2 channel shocked a bunch of people good job Park👍
Yeah most people get caught up in brand hype. Anything sounds good with the right enclosure and power.
Love how you're grown. Nice bub
Thank you JD!!
Parker good video thank you for your time bud. Impedance rise is killing the power you are getting at the woofer, but you're thinking ahead to 4 woofers. Would you do a video in this series to educate your fans about impedance rise thx.
I've been running a power acoustic mofo 152x for over a year . It bangs hard.
I am using a powerbass xma-1205d amplifier, which is much better than power acoustic though...
Exact same amp I use. But, I took off the back cover and put a fan on it. Hasn't tripped since, ran it on 1 ohm since day one, I run the absolute piss out of this amp and it put out maybe 800 watts max. Two Audiobahn AW1206T 12's wired to 1 ohm. It works and never dies (anymore).
Love the music selection lol heard some terror reid
Good work! Been here since the old rockville 10!
Dang man you’ve been her since the beginning!! I appreciate you
I have the same set up and it sounds good for the money spent
I have something similar I’ve noticed facing the subs up wards towards the roof it made a slight difference
Nice build for bass on a budget
Good to know that one Walmart amp worked with those 2 subs
Nice build with the Walmart 12s
I’m running two of those subs in my s10. Off a sfb-1000, stock electrical. Hit 143.3 at 47 hertz
That is some fire subwoofer build. Really entertaining upload
I always appreciate the making as much as you can from a little bit.
In the daily I run a single DB-10 in a box I 3d printed with custom sized aero port 3D printed as well. Metered a 138.5. I think it could burp almost a 40 if i had anything resembling decent electrical. Just too lazy to go throw in the bank of maxwell ultra caps sitting here lol
Took me idk 6 generations of changes to reach that 38.5 but damn proud of it off a single 10
More like a fart
I got a power acoustic Amp listening to the 2 Gothics that sounded good and flexed good. I can get some cheap goths and crank the amps up some more lol
Parker really be putting work into his videos and they are fire. Thanks Bro
Great video!I'm thinking once you stack them that you'll hit close to 139-140 DB's.4 subs vs 2 subs just produces more DB's😁
Alright now you gotta hook em up to the taramps!!
I remember when good gear was a lot cheaper then it is now nice low budget stuff.
Bravo excellent good experiment study and useful knowledge and information
On my mamma @Parker the bass head got the hardest bass music Playlist I done ever heard!!!!🤣 I need all them songs
the speaker box is nice
I love this series! I’ve been a sub since 10k!!
I personally use these and I find a tuned box at about 42 hz, subs forward port up has been the best in results for me. Also jl amps and these subs love each other. Definitely worth the buy for new bassheads! Thanks for this video! Keep up the good work!
Depends of the vehicle (resonate frequency of the cabin) I typically tune close to fs which for these I'd tune lower than 36 (I personally ran 4 in a box tuned to 28 and they did decent on about 2k)
Jl audio amplifiers are amazing. You can almost run any subs and sound good with jl power.
JL is a joke and you sukkkers keep buying into it
Your Dewalt is looking like mine..congrats on everything.
@4:33 i had one of those amps and they are 2 ohm stable One channel mono block obviously, So when you were running it at 1 ohm that’s actually too low of impedance for it. The impedance now is correct. I don’t know how you were able run it at 1 ohm without it going into protect mode?
Those power acoustics are pretty decent. Got one in the wife's chevy cruze n it shakes the wipers.
nice build thank you for the fun video. I wander if running separate amps changed the phase alignment between the two speakers
Is a truck louder than a hatchback like Honda fit?
Do more demo in your truck
Best Walmart speakers you can buy.