Good video, Thank you! For the torque specs , the " sliders" , or pins if you prefer ( the ones you use the 7mm hex) is 27NM or 18ft/lbs. If anyone decides to remove and replace the rotors then there are two 18mm bolts to remove . These are torqued at 55NM or just about 40ft/lbs. The upper bolt on both sides is somewhat blocked with a bracket that has sensor wires attached to them . The brackets can be removed for easier access to that bolt but if you don't have the necessary torx socket then just bend the bracket out of the way and bend it back when you are done. Cheers
Audi A6 - black yours? Private reg saw you in Werneth
Good video, Thank you! For the torque specs , the " sliders" , or pins if you prefer ( the ones you use the 7mm hex) is 27NM or 18ft/lbs. If anyone decides to remove and replace the rotors then there are two 18mm bolts to remove . These are torqued at 55NM or just about 40ft/lbs. The upper bolt on both sides is somewhat blocked with a bracket that has sensor wires attached to them . The brackets can be removed for easier access to that bolt but if you don't have the necessary torx socket then just bend the bracket out of the way and bend it back when you are done.
Cheers