How To Get Rid Of Creak or Squeak Sound On Your Mijia 365 Electric Scooter
ฝัง
- เผยแพร่เมื่อ 9 ก.ย. 2024
- Xiaomi parts and accessories
bit.ly/xiaomiM3...
amzn.to/2OBdNhV
After 2 weeks of use, I get this famous creaky sound already. It's coming from the folding mechanism. I already tried tightening the screws but it didn't work.
This is just a simple mod idea came from Mijia Users PH FB group, I just improved it a little. I used a vinyl clear plastic and a cable tie to hold it in. A rubber will probably work better but I like this one since it's clear.
CLICK that HD Button!
Xiomi Mijia Scooter goo.gl/KXQmTy
Parts goo.gl/aDFVGz
You can do what I did but you can also buy anti vibration shims
sea.banggood.com/custlink/v3KvqbLL3L
All ya need to do is loosen the centre bolt around 2mm ,then use a small spanner to tighten the long shaft clockwise towards the centre bolt and locked it. Just like I did to mine ,easy and safe. 😎
Thats correct!
Need to save screen shot this comment for later haha thanks
Theory, now take the effort to demonstrate what you're talking about because, nobody knows what you're talking about.
Nice!!! I fixed mine using bike inner tube, awesome do the job!!
Wow, great idea. At first, i thought cable tie would be very ugly, but you showed me, it is good. Using a two side tape could be an another way. But it can easily be dirty, probably.
thanks, another good material is a silicone rubber used in cellphone case :)
I just spray the joint with WD-40. Works very well! No squeaky/cracking sound anymore.
Wich kind of WD-40? Silicone one or it was the normal one? Thanks you!!
Just used WD-40 and it's worked a treat,,,,,,,,,, I've only had mine a day and the squeaking was so annoying..... thanks......
Peace from the uk....❤️✌🏻
I sprayed with regular bike oil. Had my pro 2 for 2 summers now. Got rid of the sound immediately.
Nice video, nice solution. Great job.
Starsky and Hutch music. Cool
instead of 3d printing or cutting the "cartilage", I used Thermoplastic Beads... just heat it, place it into the joint and wait to cool down...
Superbe vidéo, je viens de réalisé moi même cette pièce pour ma trottinettes Xiaomi M365 et c'est superbe, plus rien ne bouge !
Bon, c est un chiant à faire mais pour le résultat.. surprenant.. spécialement j'ai du en faire 2 et les attacher pareil que dans la vidéo, avec un seul j'avais encore du jeu, donc j'en ai fait un puis un deuxième en superposant les plastiques entre eux :)
Le plastique venait d'un plastique de protection pour la cosmétique, plastique dure et transparent.
Pour faire le calque une feuille normal suffit largement, puis découpe du papier, ne pas avoir peur de faire en haut du plastique assez large car après avoir mis le lock peu bloqué, donc donner un petit coup de ciseaux vers le bas du plastique ca devrait mieux rentrer, je vais mettre sur Facebook la forme idéale afin que ca rentre du premier en taille 1:1
really found this usefull loved the vid
I used glue gun instead, close it before the glue hardened you will get a perfect fit.
how do you use glue gun can you show me pleaseee
You can just tighten the bold by 1mm and it stops too! Much faster solution
And works only for the next 5-10km... This is more permanent method.
BLAH...
well done... is really good idea buddy!
If you let it be, Will it get damage over time or it is Just for the sound that it is annoying?
Easier is just cutting 2 small pieces of thin rubber and putting them either side
But it must cover center. That metal piece in between
Good job dude 👍🏻
Lal Singh billwar
This is why 3D printing will be a normal part of life soon
thumbs up bro !
If its making sound its good because it will go fast in speedbrakers
Xiaomi are lazy or cheap.. This problems still persists even in the current models, you are better of getting another scooter with a different folding mechanism. This creaking will drive you mad, and no solution is permanent. I have been living with this creaking for over a year. At first, these kind of hacks work, but the creaking eventually comes back stronger than ever. For the last few months none of these hacks worked anymore. I finally bought an aftermarket replacement stem with folding different mechanism Monorim MPole 2.1 for 50 euros. Had a first ride with the new stem yesterday, and I felt so good. The stem felt much more stable, and the creaking is finally gone. I was about to trash the scooter before getting the replacement stem, the creaking was that bad.. Now it feels like the scooter is brand new again. If you are looking to buy a scooter, look for a model where the folding mechanism clamp is on the front, not on the back like Xiaomi models. I think all models where the clamp is on the same side as the hinge will eventually develop some type of noise.
Hi there, are well done great idea thanks for showing this, I may just do this to my scooter when I get it thank you Oh and I hope what you did works okay let me know thank you.
no worries :) there are 3d printed TPU now and it works well too
Are nice one herald thank you very much and much appreciated To let me know about this ;-).
Better than 3d print
interesting! may I ask why you find this fix superior to a 3d print? I am seriously interested in your point of view.
@@englishflorist Maybe just because it's easier if you don't have access to a 3D printer
Hi. Is it still safe to use the scooter even if you don't do something to fix the creaking sound?
Depends on where that creaking sound is coming from. Is it the same as what is in the video?
@@hsonido yep.. Like it's somewhere in the stem
i cant even get it to fold its so tight help
I need more stopping power - Setting the KERS (RegEn) to STRONG - Will it increase my stopping power than compared to WEAK - my disc brake is not too efficient... Thanks.
Did you change the brakepads already?
@@hsonido No, i just bought this scooter last month, and the brake pads r rubbing out of the box,, so i loosened the wire and now its not rubbing, but very weak.
@@samratpaul25 did you try to adjust the caliper or the breakpads to make it tighter. You can set the regen to strong but it will heat-up faster
@@hsonido Yes, i fixed it, after tweaking with it for almost 6 hours in 3 days, I finally adjusted the position of the caliper a little and now its not rubbing anymore and yet pretty strong.... Thanks.
@@samratpaul25 cool! Ride safe bro
Or you can buy on Aliexpress just search for " M365 Rubber Pad Pole" -it's better for your scooter and hassle free. I just ordered one ;)
Disclaimer: this comment isn't an ad hahha
haha. np, I use the 3d printed one now :)
Why not use an old tyre tube rubber?
It's what I got that time and was suppose to be a temporary fix. I'm using a 3d printed spacer now.
@@hsonido Thanks 3d print also a good idea. But I'll do maybe with an old tyre rubber, that's what easily available to me at home :)
Thanks
Or u can try apply wd40 on it
Or just spray it with some silicone and you will hear nothing.
Yes, that annoying sound! :)
I have some strange CLICK noise, but it happens only once after braking or accelerating, here is the video if you could watch it:
th-cam.com/video/Oi75ghEYPI0/w-d-xo.html
I just removed everything in the hinge, cleaned and greased but it is still there.
Does it ring any bells to you?
There is a easier fix. Using ductape/gorilla tape. See pictures. Dont mind the silicon. That didnt work. Ductape did. Just one layer of tape on each side not in the middle! And some tape araound the bar to hold it in place! See link imgur.com/a/THywlgW
I put a plastic bag in it and cut the excess works a charm.
That works too! 😁
You don't Need fucking Art 🎨 Attack Guy's just use Oil WD40 or Grease
hahahah 😂
All that hard work when u could of just used WD40
I just used WD40 lol.
Pretty cool, but i dont have time for this.
Pfft, 99% of viewers will never even attempt to do this. This is so smart it's stupid 😂
Great job, just sayin'....