I really appreciate your attention to detail on your holsters. I'm really looking forward to your upgrade design to the charge to fit the bit extender as well as the 711L and extra bit storage.
Appreciate how thoughtful your process has been and cannot *wait* to toss my stock sheath for this thing. Take all the time you need, man. This looks fantastic.
This is an awesome holster, I love the attention to detail on the snap action / sound. Worlds most compact toolbox. PS: Thanks for plugging our product in the description, saw some orders come through from this.
Oh, having the same option able to hold either form of bit-driver is a great change. I was actually going to delay my purchase because I wasn't sure if I could get a ratchet driver or not, this completely obviates that issue.
These are absolutely some of the best 3d printed sheaths I’ve ever seen! Great work might have to try one. I’m more of a leather guy myself but these are slick
I just ordered a Leatherman ARC holster armor pocket clip one with side clips for the bit extender or the ratchet I have the bit extender right now but will order the ratchet for the arc can't wait to try it out and see how well it works hope it hold up for every day carry
Since i got my arc the thing i miss the most is the gut hook and old claw looking can opener!!! Maybe parts for the near futur... the gut hook i use it to open carefully plastic packaging and tie strips and the claw can opener i used it to get dirt out of my nails 😂.
This is sick. Only thing I don’t like is having to buy that specific mini ratchet, or find as different way to carry what I already own. Not a deal breaker though. I’ll be following this and likely order one some time down the line.
Just finished the video and am excited to receive mine but I have a question: can we get a horizontal carry variant with holes for a third party clip? I'd prefer to carry it at the back of the belt but want a way to take it off and put it on without removing my belt every time I get in the car.
Hello sir.yes I plan on ordering one of those awesome sheath carriers,under the 1711 ratchet,is that a bolt meter tension spot,if so,will that version when ready be available an what's the pricing,which I would mind paying whatever,cause it looks well made an won't lose my Arc or bits,was thinking of a smaller light to go with my porch untill I saw your video an sheaths.i may just get some olight pocket light to compliment my tools for edc,bravo on your sheaths brother,ty for making these,I'm curious on how it would look with the surge setup with a spot for its bosh blades an not extender an also the 711 ratchet,ty,hope to see more content
Thats a solid work of art. I was debating for days if I was going to get the ratchet or extender mod and now I don't have to worry about it. I do like the bit holders for leatherman specific mod, however a lot of people use the wiha double end bits with the ratchets. Would it be possible to get some on the back? I know you couldn't do another but maybe 5, for everyday use would maybe excite people. I've used both bit if I'm cranking out work I usually do the double side 1/4in bits.
Amazing.This is the holster that I've always wanted. It holds everything, even the 711L! Will you ever update the Wave+ or Charge holsters with these features?
Nice work man like the design ,do you only sell through shapeways or do you put the files online at all for people to test or remix,or even sell obj/stl for less ? Just im into designing nd tinkering on 3dmodels myself and not sure which way I'd like to wear it and i have a resin printer and some tough resins aswell as fdm with some tpu I'd like to try it with to see how they hold up,atleast to try before having it done in stronger materials from shapeways maybe, also spending too much money already on an arc atm right now plus trying to justify the resin I bought haha😂
I sell through Shapeways or ZapWizard.com (Made by Shapeways with a pretty face). I don’t sell my files, they are not designed for FDM at-home 3D printing, just SLS. A resin SLA printer with a nylon like substance maybe could. But I don’t share my files anyways just to the copy cats a step behind.
Soon. I need to stop a back fill features back down the line. It just takes a lot of time, pretty much a whole day per tool to update files, renderings, prices, etc…
Question about the Barnacle bit holder. How tightly does it hold the bit? I only ask this because I am constantly flicking the pliers open. I use it as a fidget toy haha. Will the bit fly out, or not? Thank you in advance!
I have seen a few people switch the blade side for left handed operation, I cannot think of a way the Arc would still fit in the holster with the blade retention. Am I correct and it would it need to be a clean sheet design for left handed holster and blade orientation or is there a way to make this holster work with a swapped blade?
Hello there, new viewer here. Have you thought about making a version of the holster (3rd party clip compatible) that instead of the Ratchet/Extender Grip has another 711L/bit holder side? That way it will be slimmer and it will allow me to carry the 711L and 11 additional bits? And that potentially can fix the blade popping out issue?
Will you be making a holster for the Roxon Flex? I would imagine it wouldn't be impossible since, to my knowledge, the Flex doesn't have any outside protruding tools. Although the locking mechanism would be different, you might get even more purchases because of the lower entey price for the Flex.
@@ZapWizard Thank you! I will be getting one soon. I am in the process of saving for one. Not sure if I can get it before Christmas but if not I will asap in the New year. One question I have is what is the third party clip for the arc holster?
@@davidmckenzie4700It is basically too late to guarantee any delivery before Christmas now. (Unless your local post office is fast). The Third-Party-Clip version is compatible with a variety of off the shelf metal and plastic clips. There are details and recommended clips on the product page that show when you have "Third party" selected.
I went to pick one of these up, and the shipping was almost as much as the product (I live in Thailand). Do you know if Shapeways ever offer discounts on shipping?
Zap do you happen to know if anyone carries the Leatherman ratchet? The only ones I see are people selling them for an outrageous markup on eBay ($300). I’d be fine with an aftermarket version made by a different company if it’s the same fit in the holster!
@@ZapWizard oh okay, I thought it stuck out further, I guess I don't notice it cause I've had your scalpel mod on my P4 since day one. So I have no concept of how much it sticks out
Lots of time in CAD. I use Solid Edge which allows for much more tweaking and sculpting of the solid model without the restrictions of a history based modeling. I also make all the features as modular bodies I can add/remove as needed. All around an accurate CAD model of each tool.
Yes, the Barnacle bit works with either the ARC or P4 and any of my holsters. The Barnacle has to be mounted on the outside away from your belt. The ARC should fit into your P4 holster already, but the upcoming holster will have a perfect fit and the 711L slot. Note the ARC holster will also fit the FREE P4.
@ZapWizard that's great news love your work I bought all your accessories to make my p4 the way it should have been I will now be ordering the barnacle and holster thanks
Nope. The material is Nylon 12 and won’t scratch the tool. Now by default the face to the tool is exposed and so it can get scratched from the outside world, I am working on a version with a closed face for those looking for that option.
i saw someone mention this before, it looks interesting. I think i am going to stick with the sheath the arc comes with though, i like how it covers the whole tool
I hate my Arc sheath. The tool sits low, making it difficult to grab and pull out. And the flap is way too long. Theres a bunch of empty space above the tool when closed. It seems to have been designed for a bigger tool, or I got a bad one.
The "Full armor" and "Pocket Clip" are two different variants. The "Pocket clip" version is needed for either the Pocket Clip or Barnacle Bit holder. The Full version is only compatible with the lanyard loop.
@@ZapWizard Thanks for the reply. Does the extended bit holder work with the leatherman sight adjuster bit driver extender? I remember in another video you mentioned a newly designed detent on the holder.
@@ZapWizard. Yeah of course but I was referring to the detent on the three rings of the original bit extender vs the two rings on the sight extender which is positioned a bit lower.
God it's such a shame that I need to move my pocket clip to the other side for this to work. I know to some people, it might not be such a big of a deal, but as someone that carries the arc without a pocket knife (many times in my pocket), it's too much of an inconvenience to grab it out of my pocket and flip it to use the blade every time. This seems like it's the perfect holder for the arc, I'm torn..
@@alexjeon5863 if the clip stays then there simply isn’t room for the holster pocket loop, or the holster gets 1/4” bigger (which costs more too). Docking the blade facing your body ends up turning the tool around for most people.
Currently the same as the garage 005: $58. That may change once I have the final cad file and calculate the profit margin, but it won’t change by much if any.
@ZapWizard yeah I saw on your site. Thanks friend. Hey quick question. Do you need/want/must have a patent for your designs? Have you got a job offer from LTG?? ;)) I've seen similar slide in options before so was also curious what drives your decision to have face open vs full enclosure with some openings to push tool out?
@ZapWizard i didnt like the empty holes (esthetically) so on my arc i installed a lanyard loop (originally sold for free p4) the other side still has original pocket clip. Now i wonder if my set up will fit your holster. Or hard to tell without physical test. Thanks for your time replying to my crazy thoughts😂
It literally can't be much thinner unless you have a thinner tool. I do sell a slim version which removes the side features and just holds the tool and bits.
Take my money!
Just ordered. I bought one a while back for my surge, but lost it on a job! Went down the gutter on the roof of a Costco! Was a sad sad day.
I really appreciate your attention to detail on your holsters. I'm really looking forward to your upgrade design to the charge to fit the bit extender as well as the 711L and extra bit storage.
Appreciate how thoughtful your process has been and cannot *wait* to toss my stock sheath for this thing. Take all the time you need, man. This looks fantastic.
This is an awesome holster, I love the attention to detail on the snap action / sound. Worlds most compact toolbox. PS: Thanks for plugging our product in the description, saw some orders come through from this.
Getting that snap sound is tricky. Tiny changes make the difference between “thud” and “click”.
Oh, having the same option able to hold either form of bit-driver is a great change. I was actually going to delay my purchase because I wasn't sure if I could get a ratchet driver or not, this completely obviates that issue.
Eagerly waiting!! I’m really impressed wit the amount of attention and detail you put into this.
You, sir, are a legend. The detail given to function, safety and ease of use is legendary.
Love all the attentions and details you are putting into the design ! Can't wait to order one !
These are absolutely some of the best 3d printed sheaths I’ve ever seen! Great work might have to try one. I’m more of a leather guy myself but these are slick
man, I'm constantly impressed with the stuff you've come up with. almost makes me want to replace my surge, with an arc, but surge is just so good.
Good work! I appreciate the update and look forward to the final product.
Excited. Appreciate the attention to detail, worth every penny.
My Arc comes in this week, so i await your holster for sure.
I just ordered a Leatherman ARC holster armor pocket clip one with side clips for the bit extender or the ratchet I have the bit extender right now but will order the ratchet for the arc can't wait to try it out and see how well it works hope it hold up for every day carry
Great!! Thanks for the update and attention to detail!!
This holster looks incredible!!!
Dude I literally just got your email as this video dropped , how epic .
Yes, yes patiently waiting for this to be available. Like what im seeing so far!
I am on your list…. As Someone mentioned I appreciate your attention to detail…. Let me know when available.
Excited to see the final product brother!
Look forward to finished product. No rush
I just bought the Arc and now am about to spend even more money 😂. I think I have like $90 in my cart right now, I just gotta wait a week.
Looks awesome! 👍
Looks great!
Yes I want to order one.
Looking forward to the final design 👍
Fantastic product! I love mine!
Ever considered making a t-shank wire stripper to fit the Leatherman Surge? I would definitely buy one!
I don't have the ability to make sharpened implements.
Dude that's sick!!!
Now it just needs spare wire cutting blade storage and it would be perfect lol!
This is pretty damn cool
Thank you for your hard work dammit
👍🏼Very nice. Good job.
Since i got my arc the thing i miss the most is the gut hook and old claw looking can opener!!! Maybe parts for the near futur... the gut hook i use it to open carefully plastic packaging and tie strips and the claw can opener i used it to get dirt out of my nails 😂.
I get opening tie strips. But currently I don’t have plans on making anything sharpened.
damn cant wait to get it already...
This is sick. Only thing I don’t like is having to buy that specific mini ratchet, or find as different way to carry what I already own. Not a deal breaker though. I’ll be following this and likely order one some time down the line.
If you don’t use the 711L you can put a bit into the same spot.
Just finished the video and am excited to receive mine but I have a question:
can we get a horizontal carry variant with holes for a third party clip? I'd prefer to carry it at the back of the belt but want a way to take it off and put it on without removing my belt every time I get in the car.
That is a good idea, I will see what I can do.
I second this idea!!
Oh yeah brother I'm buying
Just subscribed please make a video when it is ready to buy I will definitely be getting one
Yep, there will be a release video detailing everything.
Hello sir.yes I plan on ordering one of those awesome sheath carriers,under the 1711 ratchet,is that a bolt meter tension spot,if so,will that version when ready be available an what's the pricing,which I would mind paying whatever,cause it looks well made an won't lose my Arc or bits,was thinking of a smaller light to go with my porch untill I saw your video an sheaths.i may just get some olight pocket light to compliment my tools for edc,bravo on your sheaths brother,ty for making these,I'm curious on how it would look with the surge setup with a spot for its bosh blades an not extender an also the 711 ratchet,ty,hope to see more content
Thats a solid work of art. I was debating for days if I was going to get the ratchet or extender mod and now I don't have to worry about it. I do like the bit holders for leatherman specific mod, however a lot of people use the wiha double end bits with the ratchets. Would it be possible to get some on the back? I know you couldn't do another but maybe 5, for everyday use would maybe excite people. I've used both bit if I'm cranking out work I usually do the double side 1/4in bits.
Sorry, currently I don't have plans to hold regular hex bits.
Found ratchets from Montanic Adventure Store in Malaysia. About $57 in exchange, far cheaper that from Ebay Piraters.
I’ve been searching these comments looking for an answer like this, I need a ratchet!! Thanks I’ll check it out.
Ahh they’re sold out too
And it looks like I am buying an Arc... Shit 😂
Amazing.This is the holster that I've always wanted. It holds everything, even the 711L! Will you ever update the Wave+ or Charge holsters with these features?
Maybe soonish, I am getting a bit more free time soon as I finish up a big project.
Looks really cool, what is that microchip looking like thing on the side of the holster
edit: found it in description, its volty switch
How will orders be taken for the holster? Really digging this holster and the modifications you've done to it.
Once available: It will go on sale at ZapWizard.com and announced via the email list and video.
I really like the no clip/full bit version. That would be nice! Was wondering if half of those slots could be for 4mm or full 1/4 bits?
Just the flat bits, can't do both with the space.
@@ZapWizard ahh ok. No worries. Just thought I'd throw an idea. Can't wait to see the final version. Thanks as always.
Cant wait,, so well thought out. Is the horizontal holster still a bit more delayed than the rest?
No, I think the Horizontal holster will release at the same time.
Looking great! Do you have your prototypes done by shapeways too? How do you get them so quick?
I have access to a FormLabs Fuse 1 for SLS prototypes.
Nice work man like the design ,do you only sell through shapeways or do you put the files online at all for people to test or remix,or even sell obj/stl for less ? Just im into designing nd tinkering on 3dmodels myself and not sure which way I'd like to wear it and i have a resin printer and some tough resins aswell as fdm with some tpu I'd like to try it with to see how they hold up,atleast to try before having it done in stronger materials from shapeways maybe, also spending too much money already on an arc atm right now plus trying to justify the resin I bought haha😂
I sell through Shapeways or ZapWizard.com (Made by Shapeways with a pretty face). I don’t sell my files, they are not designed for FDM at-home 3D printing, just SLS. A resin SLA printer with a nylon like substance maybe could. But I don’t share my files anyways just to the copy cats a step behind.
Very cool, definitely need one. Will you be making a surge compatible model that holds the ratchet driver?
Soon. I need to stop a back fill features back down the line. It just takes a lot of time, pretty much a whole day per tool to update files, renderings, prices, etc…
Wow 👌
This is awesome! Do you happen to have dimensions of the arc or a 3d model for messing around with?
Sorry, not sharing the 3D model. The stack-up diagram is here: flic.kr/p/2peUjMP
I want that exact setup please. 🙏.
We want a new video on this
The release party live video covers the final design: th-cam.com/users/live2YEq4LVnQWw?si=P26QExPPLF0x8EvW
Have you explored making a scout mounting holster? I would love one for the arc that sits along the belt instead of perpendicular to it.
I have several horizontal carry holster models available. They are on the product page.
@@ZapWizardYes, just found them! 🎉
007 leatherman style!
Question about the Barnacle bit holder.
How tightly does it hold the bit? I only ask this because I am constantly flicking the pliers open. I use it as a fidget toy haha. Will the bit fly out, or not?
Thank you in advance!
Not super-tight. It is meant for quick finger access, and slamming the tool probably would dislodge the bit.
I have seen a few people switch the blade side for left handed operation, I cannot think of a way the Arc would still fit in the holster with the blade retention. Am I correct and it would it need to be a clean sheet design for left handed holster and blade orientation or is there a way to make this holster work with a swapped blade?
I have left handed versions, message me on the website with which config you want and then I can share the private url.
Hello there, new viewer here. Have you thought about making a version of the holster (3rd party clip compatible) that instead of the Ratchet/Extender Grip has another 711L/bit holder side? That way it will be slimmer and it will allow me to carry the 711L and 11 additional bits? And that potentially can fix the blade popping out issue?
It’s possible. Currently I just have the slim version without side bits, but you looking for a more bits, less extender option.
@@ZapWizard Yes, I think my ideal holster would be as many bits as possible, 711L and 3rd party clip compatible.
Will you be making a holster for the Roxon Flex? I would imagine it wouldn't be impossible since, to my knowledge, the Flex doesn't have any outside protruding tools. Although the locking mechanism would be different, you might get even more purchases because of the lower entey price for the Flex.
No. Leatherman.
@@ZapWizard Got it.
Interested!. Let me know when all the kinks are worked out. Thanks
The holsters have been available since the Nov 19th. zapwizard.com/collections/leatherman-arc
@@ZapWizard Thank you! I will be getting one soon. I am in the process of saving for one. Not sure if I can get it before Christmas but if not I will asap in the New year.
One question I have is what is the third party clip for the arc holster?
@@davidmckenzie4700It is basically too late to guarantee any delivery before Christmas now. (Unless your local post office is fast). The Third-Party-Clip version is compatible with a variety of off the shelf metal and plastic clips. There are details and recommended clips on the product page that show when you have "Third party" selected.
I went to pick one of these up, and the shipping was almost as much as the product (I live in Thailand). Do you know if Shapeways ever offer discounts on shipping?
I replied to your email. Sometimes Shapeways has sales but typically only around Black Friday.
Come on man I want this lol 😂
If you have a closed loop holster is it easy to get the bits from the back when it's on your belt?
Pretty easy, you can see the ends of the bits and just push out the one you need.
Yes plz take my money as well,I subscribed
Will it have a clip version or just belt loop
I would like one for the p4
The new holster will be compatible with either the ARC or P4.
Do you plan on doing any tools or scales for the Goat multi tools
No, not at the moment.
Zap do you happen to know if anyone carries the Leatherman ratchet? The only ones I see are people selling them for an outrageous markup on eBay ($300). I’d be fine with an aftermarket version made by a different company if it’s the same fit in the holster!
Sorry no idea. Every once in a while some show up at a retailer and then gets mentioned on Reddit. They are then gone before the end of the day.
I should say I may be adding this to my holster line up soon: amzn.to/3u5Uhkd
Damn, I was hoping the P4 version would work with the arc
You can dock an arc into the P4 holster. The thumb tab pushes one of the front grips a bit, but it does work if you already have that model.
@@ZapWizard even with the over sized magnacut knife?
@@adamthomas1222The ARC blade is the same size and thickness as the P4 blade. Only the Garage 005 was thicker.
@@ZapWizard oh okay, I thought it stuck out further, I guess I don't notice it cause I've had your scalpel mod on my P4 since day one. So I have no concept of how much it sticks out
Do you make a holster that will hold the tool and 2 full bit cards?
Almost 18 bits, maybe 19 can fit onto the no-belt clip option.
@@ZapWizard Thank You Sir!
Will you be updating the Garage 005 holster with the changes you made for the ARC?
I can, the entire CAD model is modular, but it may lag a bit, lots of work each time there is a release.
@ZapWizard thank you I am interested
@@ZapWizardI'm interested as well!
When will you have the arc open clip one again?
I won’t. I have been prototyping a few things to make the clip stronger but they add too much cost, more than buying a metal clip.
How do you make these? Amazing...
Lots of time in CAD. I use Solid Edge which allows for much more tweaking and sculpting of the solid model without the restrictions of a history based modeling. I also make all the features as modular bodies I can add/remove as needed. All around an accurate CAD model of each tool.
Will the p4 with the barnical work in the new ark holster i have the p4 holster but want the 711L slot also
Yes, the Barnacle bit works with either the ARC or P4 and any of my holsters. The Barnacle has to be mounted on the outside away from your belt. The ARC should fit into your P4 holster already, but the upcoming holster will have a perfect fit and the 711L slot. Note the ARC holster will also fit the FREE P4.
@ZapWizard that's great news love your work I bought all your accessories to make my p4 the way it should have been I will now be ordering the barnacle and holster thanks
Do these holsters scratch the tool taking them in and out etc?
Nope. The material is Nylon 12 and won’t scratch the tool. Now by default the face to the tool is exposed and so it can get scratched from the outside world, I am working on a version with a closed face for those looking for that option.
You should incorporate a streamlight microstream
Way too many “popular” lights to make holsters for.
Is that the Volty Switch? looks like a regular Volty. Will a Volty Switch fit in the holster?
It will fit the Volty Switch also. I haven't physically confirmed it, but worked with a customer who had one on a prototype. Mine is on the way.
Excellent, can't wait to get the holster!@@ZapWizard
i saw someone mention this before, it looks interesting. I think i am going to stick with the sheath the arc comes with though, i like how it covers the whole tool
I hate my Arc sheath. The tool sits low, making it difficult to grab and pull out. And the flap is way too long. Theres a bunch of empty space above the tool when closed. It seems to have been designed for a bigger tool, or I got a bad one.
I am thinking of making a full guard or at least partial front guard version. You would have the bottom front exposed to push the tool loose.
Does the full armor pocket clip version have enough room to add the pocket clip swap to bit holder mod?
The "Full armor" and "Pocket Clip" are two different variants. The "Pocket clip" version is needed for either the Pocket Clip or Barnacle Bit holder. The Full version is only compatible with the lanyard loop.
@@ZapWizard Thanks for the reply. Does the extended bit holder work with the leatherman sight adjuster bit driver extender? I remember in another video you mentioned a newly designed detent on the holder.
@@trigganometry168 it does. But the prongs on the sight adjuster will poke upwards.
@@ZapWizard. Yeah of course but I was referring to the detent on the three rings of the original bit extender vs the two rings on the sight extender which is positioned a bit lower.
@@trigganometry168 I can’t say for certain. As I haven’t tested it.
What is the accessory stored next to the 711L?
The volty switch. Link in the description.
@@ZapWizard Thanks, I thought it was some kind of torch, a volt bit is so much more useful for myself and something I hadn't thought of
God it's such a shame that I need to move my pocket clip to the other side for this to work. I know to some people, it might not be such a big of a deal, but as someone that carries the arc without a pocket knife (many times in my pocket), it's too much of an inconvenience to grab it out of my pocket and flip it to use the blade every time. This seems like it's the perfect holder for the arc, I'm torn..
@@alexjeon5863 if the clip stays then there simply isn’t room for the holster pocket loop, or the holster gets 1/4” bigger (which costs more too). Docking the blade facing your body ends up turning the tool around for most people.
@@ZapWizard I've seen that you had a left handed version, do you maybe have that one with blade facing inside?
@@alexjeon5863 sorry no. Blade on the outside. If I had one with the blade inside then the side options end up hitting your belt.
Will this work for a P4?
Yes, it should as the blade is the same position as the ARC. I just haven't verified it because my P4 is heavily modified.
@@ZapWizard awesome, I have your bitholder installed on mine, but would love to have this sheath to be able to carry the mini ratchet as well!
whats the price
Currently the same as the garage 005: $58. That may change once I have the final cad file and calculate the profit margin, but it won’t change by much if any.
Pip boy update when?
Soonish. I am just finishing up a family project that may free up more time.
@@ZapWizard Thanks. Looking forward to it.
How much
$58 ish
@ZapWizard yeah I saw on your site. Thanks friend. Hey quick question. Do you need/want/must have a patent for your designs? Have you got a job offer from LTG?? ;)) I've seen similar slide in options before so was also curious what drives your decision to have face open vs full enclosure with some openings to push tool out?
@@uzbeck2006 It shows off the tool. I use my tools, they will get scratched, it is patina just gets better with time. I should patent these.
@ZapWizard i didnt like the empty holes (esthetically) so on my arc i installed a lanyard loop (originally sold for free p4) the other side still has original pocket clip. Now i wonder if my set up will fit your holster. Or hard to tell without physical test. Thanks for your time replying to my crazy thoughts😂
Btw the lanyard loop looks great and works for me as I will use a lanyard to secure most expensive multitool in the world 😂😂
I think the idea is good, but the execution is not. That holster is just too thick, you'll be bumping everywhere.
It literally can't be much thinner unless you have a thinner tool. I do sell a slim version which removes the side features and just holds the tool and bits.
I sent you a msged on IG. Was wondering will you be doing a black friday sale?
I don’t know yet. The profit margin on these doesn’t really support big sales.