How to fix a flat wheelbarrow tire
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- amzn.to/2eZGQat Ratchet Strap works great for this.
amzn.to/2fgQQjL I own and love this small air compressor
amzn.to/2eStorq Fix a flat sealant for tires
goo.gl/qSxcEw Click link to make your tire flat free for life.
Learn how to fill a tubeless tire that has a bad seal. Disclaimer:
Doublewide6 has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’s videos. Use this information at your own risk. Doublewide6 recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6. Please support Doublewide6 by donating to his Patreon Account / doublewide6
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
Thank you from a 60 yrold woman who followed your directions and just fixed my wheelbarrow tire. Thank you so much.
You're the man, Doublewide! I had almost run out of curse words trying to get that tire filled.
Thanks DW! I used a ratchet tie down strap instead of a rope. Did it right on my snow blower didn't even bother to remove the wheels. Jacked it up with a couple of 2 X 4's, wrapped the strap around the middle of the tire(s), gave it a fair squeeze with the ratchet and bingo. Took 5 minutes per tire. Two things: put just enough air in the tire so it begins to inflate and use a channel locks to spring the ratchet. It gets really tight you don't want your fingers in the way of the handle when it's released.
I'm a 60 yr old woman that does alot on her own. Bu this had me puzzled , seeing double, and about to SLING my air pump on top of the roof, until I saw your video, 😊 thankyou so much. Now I can stop forcing it to go and simply push it😅
Both of the front swivel tires on my rider had gone flat & broken the seal. I thought I was going to need new ones, so I started calling up mower shops & it was going to cost me anywhere from $70 to $120 with installation. Then I found your video, & I'm pretty sure this will work! Thank you so much!
Thank you very much for the video, i just went to fix my old wheelbarrow flat tire after seeing your video and the flat tire was fixed in 5 minutes with my compressor. I am very happy that i can fix this myself and don 't have to buy anything.
Have used this method a few times and it always works great. Today I discover that I can fix the tire w/out removing the tire. Just make sure you can jack it up, have space to work and some type of compressor. I keep a cheap $20.00 portable compressor in my car. It works for auto tires and has plenty of power to do flat mower tires that are off the rim, but gotta use the rope around tire.
Here it is 6 years later and your video helped me out! TH-cam cracks me up. I used a ratchet strap and it worked fine. Thanks bud!
After buying 2 new wheelbarrow tires that didn't fit, and then contemplating just buying a new wheelbarrow, I found your video. I am 5 ft tall and pretty handy around this house but this video made me feel very proud. It totally worked!! thank you doublewide6!!!
Thank you. Very useful - I used a ratchet strap. Inflated in moments. Would never have guessed!
Thanks for posting this tutorial! Had this happen to me yesterday on my hand truck, and was stuck trying to figure out how to inflate it without creating a fire hazard in my small apartment.
Many thanks. Prior to heading out to the hardware store to ask for help, I thought I would check TH-cam. Your method worked perfectly. Both tires inflated in about 15 minutes. Bravo.
us office workers who just have a screw driver set and a crescent wrench thank you!!
i would have got a new tire,the stuff you pick up on youtube saves a lot of bucks.
Thanks for this video! I have a hand truck I need to use this weekend, and with this very cold weather both tires were flat. After watching your instruction I was able to inflate both tires with a bicycle pump!
And just in case this might be helpful to others: it was easier for me to do this with the tires left on the hand truck because I could leave the lever tight against the frame while I then pumped up the tire.
Awesome video - spent too long trying to figure it out myself; then solved it in four minutes thanks to you.
Thanks, I was trying to hold with my knees and push with one hand. Almost had it. This was what I needed to see. Thanks again.
Thank you Doublewide6. This is exactly what I was facing. I loaded up my wheelbarrow full of dirt and didn't notice the tire was underinflated. The added load must have broken the bead and it went totally flat. Thanks again for sharing this awesome tip.
My wheel barrow tire went flat yesterday when I cornered it to hard. I tried to put air in but it was no go because the bead wouldn't seal. I watched your video and did what yo said. It worked great!!! Thanks for the help.
focusfilmsllc1 Happy it worked for you.
Brilliant! thanks much for posting this. My utility cart tires both were flat and I thought I needed a special tool to fix so tried the local tire shop and they wouldn't help with it. The hardest part about this was finding where I had hidden the rope in my garage. :-)
I've had 2 flat tires on my hand truck for months and couldn't figure out how to get them inflated. Just found this video and had both of my tires pumped up (bike pump) in a grand total of 15 minutes.
You're a freakin' genius as far as I'm concerned!
Thanks for this video.
Thanks, I haven't tried this yet, but I plan to. Nice to know how to fix it.
Thanks, worked great on my snowblower tire this morning.
I was having trouble getting a new lawn tractor tire to seat, I got a piece of rope and followed your instructions, in no time at all the bead seated and the tire is back on the tractor. Thanks for the tip, I watched several videos that used ether and didn't feel comfortable playing with fire, clever but seemed like overkill for such a small tire, again, thanks.
Thank you!!! I had worked at it an hour with no results and then I looked at your video. Wow!!! In just 5 minutes the tire was fixed. I will remember this trick forever!
Sounds like you learned something useful. Thanks
Had a tired go flat in a middle of a dig-out. Thanks to the video, the tire to my snow blower is good to go and now I'm ready for the next dig-out this weekend.
Ancient post, but I must say I was infuriated... the moment I saw you wrap that tire tournique I flew into a blind rage that I didn't think of that myself. It worked flawlessly. Bravo.
dude, even though i had a rounded wheelbarrow tire, i used your technique and it worked! thanks for the tip! and i was about to shop for a whole new wheelbarrow.
Same
This video was a time and money saver when I needed to get a job done rather than run to hardware store for a new wheel. Thank you!
So after about an hour trying several different futile methods I was about to head to harbor freight for new heavy duty yard cart wheels and tires. Well I found this video before going and now I have the tires inflated again I love you
I got a handtruck sitting outside with two tires EXACTLY like this. Noiw thanks to this video, I have a way to address the situation. Your efforts have helped me out Sir!
I'm happy the video has helped.
It worked for me, all by myself on a 14" wheelbarrow tire, using only a hand pump. And I'm just a 100 lb woman! But I did follow the suggestion that someone made below, to wipe clean the rim and inner edge of the tire with a damp rag, to clean any debris that might prevent a good seal. Thanks very much!!!
Wow! I thought there was no way it would work on my wheelbarrow wheel because it is about 1/3 the width of the wheel you used in the video. But, what do you know, it worked like a charm! I feel much more manly now. Thank you doublewide6.
I like this method a lot better than the ratchet strap on some of the other videos. Thanks for posting.
Totally worked. Couldn't believe it. THANK YOU.
Thank you....thank you ....thank you.
I wasted three hours few days ago trying to fix two tires.
I fixed them in few minutes thanks to your video.
Your video saved me a tire and probably a bunch of headaches, and I learned something new. Thanks!
used ratchet strap but same concept...however, I think the thinner rope vs straps displaces the pressure better to the rim. thanks
Thanks for the tip. It worked like a charm for me.
Thank you so much, I thought for sure I needed to buy a new wheel, tried this and it worked almost immediately!
hey d ouble wide , I would like to say thank you for your time on this video I saw it last week and thought that was cool and hmmm would it work , well I will be the first to say yes ,,,, I got up the next morning and pulled my boat trailer out and well the tire was completely off the bead I didn't have a rope but I had a ratchet strap, it worked like a champ , just when you use a ratchet remember to keep the hand away from the ratchet so it wont hit the hand.. thanks again .
Happy I could help.
it worked, great thanks. the shops said it cost $70 to fix when I bring in the flat tire without the snowblower. Cost more to fix if flat is still on the snowblower!!!
Sir you are a genius! Worked perfect with the rope. Much better than a ratchet strap. THANK YOU!!
Awesome! Just tried this on a wheelbarrow that I thought was a hopeless case. Worked a charm!
My uncle's dolly and I thank you for posting and taking the time to edit the compressor out :P
I was looking for a demo on ether sealing with flame. Been awhile since I did that and wanted to review the correct procedure and see if there were any tips. Bingo, there is your idea and darn if it don't work without the need to find the ether (or other flammable gas). Thanks. Been meaning to re-inflate a tire on my wood chipper for the longest time but kept putting it off. Now I can roll that sucker right out of the shed with no problem.
just used this method in the back on my tailgate with dolly. worked perfectly! Thanks!
Thank you! Especially for using the hammer. Those of us that are not mechanically inclined are thankful to know that everyday items are sufficient.
Thank you! I also used a sealant between the wheelbarrow tire and rim. It worked great!
Been there done that!!. If you take a 1" flat strap with a rachet it will work a lot better than that rope and hammer affair you are using. Also, another solution is to remove the valve core, then put a blow tip with a tapered rubber tip on your air hose you will be able to blow air into the tire a lot faster. You can blow in enough to seat the bead, then install your valve core and inflate the tire normally..
Ratchet sounds pretty good and easy
Thanks for your tip. I tried to use the rope but as I twisted the hammer, no matter how careful I tried to be, it keep sliding off the side. I ended up using some 14_gauge galvanized steel wire I had in the garage. I used an 8" needle nose pliers to twist the wire until the tire looked like it was pressed enough against the bead. I checked to see if the tire would hold air and kept checking every twist after that. A couple of twists later the tired was filled with air. The advantage the wire had over the rope was it tended to sink into the tread and didn't wander off the tire as the rope had done.
Thanks, Buddy ,this procedure also WORKS for fitting a Brand New Tire on an Old Rim. Compressing the tire opens out the opening for easy rollover on the rim.
great simple way of inflating tyre had tried many ways this worked straight away
Right! It is easiest to use a compressor with a BIG tank, that has lots of high pressure air, not just a burst before the pressure drops.
But once unseating problems start, I just take out the valve and put in a tube. That is usually a more permanent fix, if you have access to a tube.
10 minutes tops and wheelbarrow tire inflated. Works GREAT!. Thanks for the video.
Very easy. The rope worked well. Fixed in under 2 minutes.
Thanks! Going to use this method for a dolly tire. Really appreciate it!
Same. My dolly tires are flat and loose
Thanks worked great for fixing my front mower tire. No more paying shop to do it.
I use a ratchetting tie down to compress the tire then inflate it. Works well on small tires of all kinds.
+James Fischer I use the same method on 15" truck tires. Works excellent. I would have thought a strap would be too wide for a small tire but I guess not! I'm gonna use this rope method or the straps from now on for my small tires!
I learned that trick long ago it was passed down from my grand father I also have had luck with putting my foot pushing on the tire . I wish I could still that but I had a stroke and man did it screw me up. I was already a disabled veteran . The rope trick I use now because I can do it in a wheel chair.
good presentation, fast, confident and not retaded
Thank you so much for this video! Just fixed my wheel barrow tire all b myself with your video! saved me lots of money! Thank you again!!!!
Had this problem this am and this fix worked like a charm. Thanks!
Thank YOU so much. You spared me from having to get a new wheelbarrow. Blessings.
You are a lifesaver. I can't believe I actually fixed my tire after watching your video. Thank you
Thanks...you saved my back, awesome. I used a long screwdriver and a hand pump, took less then 5 minutes.
Thanks double wide. I used an old braided belt and it worked great.
doublewide6 you dialed us on the wheelbarrow tire repair. Thanks!!
definitely prefer that ratchet strap method, i think its a little safer then using a hammer and rope
John W That's a good method if you have a ratchet strap.
Good Job I've actually used a Tow Strap when Rope wasn't handy: Needless to say I see you already heard from the Peanut gallery on how to do it better ;)
Thankyou for this, ratchet strap works pretty good too. Gotta be a little carefull taking it off though
I have never seen it done that way. Thank you so much for teaching me.
Tie the rope ends to a stationary post or solid object and twist the tire until tight the hold it down to air up. This keeps both hands free and avoids your lever slipping and thumping you who knows where.
Thanks! I can now return the new tire I bought- great idea and worked with no hassle at all.
Thanks! Wish I had of clicked two days before buying a new assembly...regardless, I will use your technique for further endeavours. Well done!
Thanks for the tip, worked like a charm for my snowblower tire.
thanks! dam first time using the snowblower this year and all I have is a little tire pump you plug in 12v, freezing my hands of trying to get the bead. Your rope trick worked first shot
Our wheelbarrow is very narrow, but I managed with a thinner rope and a screwdriver. Overall, the trick worked! Thank you.
Worked like a charm! Thank you for posting this for people like me!
Man, thanks! so nice to have my hand truck back to life after sitting in the garage collecting cobwebs...
Excellent repair tip! I was about to take the tire to a shop when I thought I might find some help online. You were it. Your tire inflation technique worked like a charm. Thanks.
Worked perfectly on a dolly tire. Saved the day, thanks!
Thanks! I have a flat tire on my log splitter and this is my problem. I'm going to go try it right now. Thanks again!
Double wide,
Thanks man. Worked like magic dust. I had the same problem as Hudson A. Hand truck is rollin now.
Thanks for the help... but my attempt was a fail... used a snipit of your video to show how to and how not too on my video... will give full credit and link to your channel, Keep up the good work brother! (let me know if there's an issue) Thanks again.
Thanks for the tips. How would you remove a wheel with axle pin. The pin doesn't go all the way through the axle, I'm not even sure there is a pin but a hold in the side of the axle with a type of collar, about one inch from the end of the axle.
Great trick ! Adding to that I would brush a wet non hardening glue around the bead area. Having the goop the tire shops use would be good.
About to try this with a ratchet tie down. Wish me luck!
Good tip! My daughters got a chuckle when you dropped stuff off screen.
They wanted to be pushed around on an old hand truck.
Great video. Thanks for recording it. You just saved me hours of wasted time and probably some significant expense !
thank you so much.
You just saved me.. great video. Doublewide you're the man!
Today I bouth a wheelbarrow from garage sale for 3$, because of flat tire, I was able to fill it up by squeezing it with too hands, and my wife filled it with air using foot pump.Will try rope next time.Nice video.
Thanks! The rope trick definitely worked.
Thank You SOO Much! I tried fire a dozen times, tried this once and it worked, although you need some good rope.
Rope fix work for me. Great idea. Thanks Buddy
Worked like a charm. First time, one take. Thank you!
Thanks a million followed your direction and fixed my problem. Again Thank you a million.
Awesome, this fixed mine that i thought for sure I was going to have to replace whole tire as there was no way to pry the damn tire off the base.
Brilliant and extremely useful trick. I put this into practice and added to my toolbox of knowledge. Thanks!
Thanks, saved me some trouble. I used a ratchet strap too.
Great tip! Thank you I fixed two of mine with that trick. ...I darn near choked laughing at the expected crash @ 1:54 that was the best response too!
I used a bungee cord to do this on a snowblower tire. Unfortunately the tire had a cracked sidewall and would not hold air so I got a used wheel and tire assembly to replace it.