265/70r16 to a 265/75r16. 1" difference will work for me. 1" I dont have to worry about the cvj angles and driver's side bearing and new rims. Toyo Discoverer AT3. Here in 1024.
I have a 3 inch lift with 3 inches in the front and 1.5 inches on the shock with an add-a-leaf system which makes a it an extra half inch in the back to maintain a factory rake. It also has 285/70R17 BFGOODRICH KO3 tires wrapped around the 4Runner TRD Pro wheels that are 17x7 inches with a positive 4 offset. No rubbing whatsoever.
Dang, I was worried about running 265/65R17 duratrac tires on a 17x7 on my 2016 with stock suspension and +4 offset. But if you're rocking this setup on a 17x7 I don't think I have anything to worry about
I went with 3.5” in the front and 2” in the rear and a 285/70R17. I’m running a 1.5” spacer, did the cab mount chop myself and it doesn’t rub at all. I still plan to do a viper cut before I go camping just to be safe when I’m really pushing the suspension.
I have a 2019 Tacoma Sport, and when I needed to replace the stock tires with all weather tires (mountain + snowflake) the ones they had in stock (and cheaper!) were 265/70R17 for my 17in wheels, no lift. They are awesome (Nokian Outpost AT 115T) with a nice aggressive tread and plenty of sidewall. One thing though - although this size tire is indeed 1" more in diameter, the actual 'lift' of the tire on the truck is only 1/2in. Not enough to throw out the speedometer by enough to really matter.
I put on bigger tires on the first tire change. The only thing it hurt was the speedometer showed I was going a few miles slower than I actually was going. I heard it might affect fuel economy but I didn't notice a change.
@@RobMotive 235/75R15. This is for my 1999 Ford Ranger. I am looking at Tacoma or Tundra for my next truck. My wife drives a Lexus RX350 and I like the product so was looking to replace my truck with a Toyota product.
Thanks for the research. I’m probably going to do the same thing you did. 2 inches in the front on my TRD Sport. 275/70R17 with Wildpeaks. Thanks again…
Thanks for the video, looking to upgrade wheels and tires on my wife's newly purchased17 tacoma. Putting a small lift in it first, but this is a big help, thanks again
I’m still scared!!!! 😂 I plan on getting 285/75/16 ko2s. Stock wheels with 3/2 spacer lift. Wish me much luck 😂 thanks for the information I appreciate it
I guess another comment since I was off topic lol. So I am probably going to do the TRD factory lift, because when I purchased my truck I went out to the 5 year maintenance and 7 year drive train warranty. So the TRD lift will not affect any warranty and it comes with 3 years as well. That said, I do want to put TRD rims on and go with a more aggressive tire, maybe 265/75R16. My stock set up is 265/70R16. Don't forget, you start changing offset you also start affecting bearings as well.
That's what my manual says for 2014 Taco. It says 265/70r16. The truck I bought came with 265/75 r16. It doesn't seem to really rub but I'm wondering if they are the wrong wheels for this 4 cyl Taco.
Thanks for the great info bro!🤙 Just pulled the trigger on Falken Wildpeak AT4W's. 265/75/R16 On a stock 2019 Tacoma Off Road. Can't wait to get them! Your guide helped me choose the size. Thanks again!
Hello Rob. I've seen plenty of large trucks running those rubber band tires. They don't even look good to me. Enjoy watching your TH-cam channel:-). Thanks for all you do!
I have 275/70 R17 with stock TRD Sport wheels on my stock TRD Sport. No rubbing at all. Didn’t have to trim the fenders & I didn’t need spacers. But it is millimeters from the upper control arms. 😬
This is exactly what I was thinking for mine ‘22 Sport. I’d love to see how yours looks before I make the purchase. Anywhere I can check out a photo or two?
Hello! I really congratulate you, excellent video, I loved it, I have spent almost 5 months looking for information about it and you have been the only one who has provided it. However I have a question. I have a 2023 Toyota Tacoma Limited with R18 of factory (265 / 60R18), and I want to change them to about 275 / 70R18 as you recommend in your video, But it was not clear to me if I should place a lifting kit for her or not, if this should be 2 inches, and if I should put spacers on the sides or it is not recommended. Can you help me? Thank you very much
Thanks for that spreadsheet - looks like 275/70/17 is what I am aiming for. Now the question is with zero offset and a 2/1 lift if any trimming is needed...
Yeah, I think I've seen that list online before. Right now, I'm doing my homework on skinny pizza cutters, 255/80R17. Since mine is my daily driver, less road resistance and better fuel mileage may be the way I roll... LOL! 😎
I went wild with my 2013 Tacoma . I put 285/45r22 . I don't feel it bumpy while riding . It does not rub after i removed the plastic factory mudguards..
Aloha and good evening Rob 🙏 ✨. Mahalo for providing this educational and very informative 👍 video. This is truly smart to making potential customers and modders aware on the maximum tires to use for no lifts and with lifts. You mentioned Titanic rims with very little tire tread wall. I've seen those on SUV'S and 4-door cars too in Oahu. Yet, a major pothole would give you a wonderful whiplash and a major busted suspension too. Yeah, I've seen those nutty mods as well. This is a terrific video Rob. 📹 Keep up the great work 👏 👍 💪 👌 🙌 😀. Miele Kalikimaka e' Hauoli' Maka'hiki Hou! (Hawaiian translation for saying "Merry Christmas and a Happy New Year!"
Good Afternoon Rob, How are you doing? Well, I finally bit the bullet and had my tires changed from Cooper to Falken wildpeaks. Overall I like the look. I didn't go for the 275 70 17, only because I wanted to keep the gas aspects within the range. My question is that I went to Discount tires and after they mounted the tires, I noticed that on the dash board the tires gauge did not tell me the amount of air on each tires. How do I get it to show it? Take it in for a front end alignment? It rides well overall.
It takes a few minutes of driving for the truck to pick up the sensors. If you’ve driven for a while with no reading, take it back…something is wrong 🤔
@@RobMotive I went ahead and set up an appointment for Saturday afternoon close to home. The discount tire is 40 minutes away. Appreciate the response 👍
I recently bought a 2018 Tacoma from a dealership and it already had a lift and wheel spacers on it, but it came with the stock wheels. The dealership didn't know any details about the lift height or any of that, so I'm not sure what I even have on my truck. So I guess I need to determine what lift and spacers I have before I go to get wheels and tires for it. Still a good reference video for when I do figure it out though.
265/75/16 with only a -6 offset and I get minor rubbing when turning on uneven pavement or when I have multiple people in the truck that weighs it down. I’ve been told to get a leveling kit to elevate this problem. It rubs on the front fender well when it does rub.
I’m on a 3/2 lift with 20” rims. Currently have 265/60R20. After a ton of research I’ve heard that going to a 265/55R20 would fix the rub issue. What was your experience on the 20” wheels? Would this combo fix my issue? Thanks.
I ordered a 2023 tacoma offroad and took the factory lift lit (2”front 1”back) i was looking forward to put 275/70R17 right when I’ll receive it.. your video just confirmed i can but what about spare tire? Gonna need same size because i will go off-road with it.. will a 275/70R17 fit underneath the truck as spare tire? Thanks
I’m confused by the chart a little bit….isn’t a 265/75 taller than a 265/70? It seems that according to the chart that the rim size is effecting the tire height. For example….how can a 265/75/16 be one inch taller than a 265/75/15 and also a 265/70/17 be taller than a 265/75/16? Or am I just wrong in what I think the tire sizes are?
Love your channel straight to the point no BS. I have a few questions I just purchased a 2023 Tacoma SR5 tire size 245/75R/16 I want to go up to 265/75R/16. i’m aware that I don’t have to use a lift for this set up. Now I want to go up 2 inches in the front and 1 inch on the rear. Do you recommend spacers, or Bilstein B8 5100 set up. The most off road it will see is visiting family in Vermont and Upstate NY in winter months where the snow will be deep , I live in hot ass FL so now off road here. I want to do the job right I want to know if the original shocks can handle the extra weight of the tires ride quality and dependability. If I can get away with the Rough Country front and rear spacers that’s fine if not so be it.
I watched the video hoping to learn if I could put 2nd generation tacoma wheels on my 1st generation Tacoma. I currently have stock 15 inch wheels with 265/75r15 tires. Can I put 245/75r16 wheels and tires from a 2015 tacoma on my 2000 tacoma??
What changes when you adjust the offset? I have a 2”/1” level on mine and want to put on some 17” wheels that stick out just a bit further…. Can’t find the right tire size or offset yet.
I'm confused, I bought Wrangler Duratrac 265/70/R17 online for my 2013 Tacoma because I wanted to go from the stock size (16) to a larger one (17) and when I took the truck to get the new tires installed they told me it wasn't possible because it sits too close to the fender, what is the correct size to be able to put 17" rims on then?
What if I’m running 305/70r16 on a two inch lift-ish with no rubbing whatsoever and it pushes passed the fender flares, what could I possible run on my truck, do you think 33s on 20x12 wheels would work?
Hi Rob enjoyed the video’ want to ask I have 16in stock wheels on my 2015 Toyota Tacoma can I go with a 17 in stock wheels and will I get the same smooth ride?want to go with 265/70R-17 tires,
Just curious Rob. I have a 2019 limited with 18”. Is that chart for a 2019 model too? Or just newer? I’m looking to buy tires same stock wheel. So if I got the 265 70 18 I shouldn’t have to worry about rubbing correct?
So my manual for my 2014 base 4cyl. taco says max size for 16" tire is 265/70. I just bought it and it came with 265/75's. I don't think there is a lift on it. Should I be worried?
Hey man I got a 1998 toyota tacoma Ingle cab low I want to put a 2 or 2 1/2 inch I wouldn't like to look to high but like if it was factory lift what size tires and wheels should I buy that it wouldn't rub. Thanks good info by the way.
@ken do you have factory suspension or are you using a lift? If a lift, what is your setup? I am looking at lt285/75r16 and wondering what/how I may need to prep the truck
Can i buy new rims the same size as factory but with an offset? i just want a negative offset dont really wanna put a lift on it at this point. it s a 2022
Can you give me some insight as to which wheel would have the least amount of issues with a 2" lift? 18x8.5 - 0 offset (4.75 backspace) or 18 x 9.5: -18 offset (5.4 backspace). Aiming to go with 275s or 265 tires, no way am I going with 285s. Greatly appreciated as I'm torn and can't find decent pics online of the fitments.
I am planning to add 3/2 spacers and put 285/70/R17 on my TRD Sport Stock Rims. Does anyone have experience on whether they will rub? I mainly drive onroad but in the near future (Spring/Summer) will be going on trails and gravel roads.....not any major offroading. In case anyone is wondering why that tire size, I was able to get 5 tires from someone with 3k mules on them for $100 each, couldn't pass it up.
@@RobMotive great help! Someday I might lift my 2020 trd off road, but mostly just want to buy some BFG KO2s & if I can gain an inch for now I’d be happy. Thinking about keeping these wheels and tires and buying a set of black steel wheels for new tires, the factory tires do pretty good off road in mud and in snow, truck does amazing and with KO2s I think it’d be unstoppable. Thanks for making this video huge help, and thanks for telling us about the rub with your new tires you got, love that your honest and give us the truth about everything you install! Great content! Thanks again!
OkayRob, you got a sub and a bell ring. I have been seeing you vids show up (maybe because I am modding my Taco), and I plan to put the TRD lift on, as well asbetter tires and I like the TRD rims maybe. Research now, do it when I know. Thanks Rob for the great content. BTW driving a 21 Tacoma TRD Off-Road.
@@RobMotive Oh believe me I watched the whole video, I just want to make sure. You have one of the best comprehensive videos on tire size. I just want to make sure there wouldnt be any rubbing, or would it depend on the offset of the wheel? TRD sport tires have like +30 and I dont know if it will fit those 285 without rubbing on the upper control arm. Any help would be much appreciated!
@RobMotive I notice u had a 2 inch In tge front and stock in the back is there anyway I can get sum pictures of your truck?? with rim and tires sizes I'm kinda new
Hey Rob, I put 17 trd rims and 265/65 17 falken wildpeaks on my 2015 trd offroad tacoma and it looks and rides fantastic!!, no rub at all. Thanks for the video!!
I have a 2020 Tacoma utility model with the stock 16" steel wheels. Charts tell me 265/75R 16 tires will NOT fit. It looks like they will rub on the upper frame section. Any idea if this is truly the case. I want to go to the 265/75 size when I get new tires but not if they won't fit.
@@RobMotive is the video out on this yet? I’m looking to go 265/75/16 on a stock truck/wheels. On 2019 Tacoma SR. Wondering if that will do any rubbing. It should be fine right?
@@RobMotive im on 285 75 16, 16x8 and 1.25 wheel spacers. Ive done CMC, pinch weld hammering, and viper cut. Being 2.7 5speed is my limiting factor. But i do have the itch to go bigger already. I really like the cbi offroad oversized fender kit with cab mount relocate.
@@RobMotivethanks for the website. I'm leaning towards put a 245/60/r20 on my Tacoma. I like the low profile look. How would I go by figuring the rim that can fit that tire size and Tacoma lugs?
I have a Bilstein 5100,a 2.5 lift and Eibach aal with a 285/70/17 Wildpeak tires and a Method 17x8.5-0 wheels, and installed a 1.25 Spidertrax wheel spacers, had a bmc done and did some minor inner fender trimming, i'm now thinking of upgrading to a 17x9-12 offset, leaving the spacers on, I just wanted to have a little bit of aggressive look, since I don't off road anyway. mostly going to shows and highway /street driving. I watched the video all the way..didn't show the chart !
You can't run a 285 on a stock rim with a positive 22 offset you're going to rub the control arms you're going to rub the sway bar you can't do it you need to have more offset.
265/70r16 to a 265/75r16. 1" difference will work for me. 1"
I dont have to worry about the cvj angles and driver's side bearing and new rims. Toyo Discoverer AT3. Here in 1024.
The 265/75/16 on stock suspension looks real nice
How much did u spend on total with rim and tire and what brand u recomend
@isaigaona1 It was around $2900 with credit for the stock wheels and tires. Definitely Falken Wildpeak AT3W.
I run the same size. 6" lift . I do most on road driving . Like the size / combo
I have that same size with Mickey Thompsons
Just did the LT265/75R16 BFG KO 2 on my 2019 Pro Love the looks and ride. No rubs
0 offset or +25?
I have a 3 inch lift with 3 inches in the front and 1.5 inches on the shock with an add-a-leaf system which makes a it an extra half inch in the back to maintain a factory rake. It also has 285/70R17 BFGOODRICH KO3 tires wrapped around the 4Runner TRD Pro wheels that are 17x7 inches with a positive 4 offset. No rubbing whatsoever.
Dang, I was worried about running 265/65R17 duratrac tires on a 17x7 on my 2016 with stock suspension and +4 offset. But if you're rocking this setup on a 17x7 I don't think I have anything to worry about
@@ANONM60D the setup I have made my truck so much smoother than stock.
I went with 3.5” in the front and 2” in the rear and a 285/70R17. I’m running a 1.5” spacer, did the cab mount chop myself and it doesn’t rub at all. I still plan to do a viper cut before I go camping just to be safe when I’m really pushing the suspension.
I have a 2019 Tacoma Sport, and when I needed to replace the stock tires with all weather tires (mountain + snowflake) the ones they had in stock (and cheaper!) were 265/70R17 for my 17in wheels, no lift. They are awesome (Nokian Outpost AT 115T) with a nice aggressive tread and plenty of sidewall. One thing though - although this size tire is indeed 1" more in diameter, the actual 'lift' of the tire on the truck is only 1/2in. Not enough to throw out the speedometer by enough to really matter.
❤
LT255 75R 17 1.5" taller and .4" narrower. 1.5" lift in the front. Fits and rides perfect
Heard this size might also fit on a stock truck too while using a 4runner 17" wheel.
Thank you for posting this I don't know why somebody hasn't posted this earlier. Just recently bought a new Falken AT3 Ws in the 265/75r 16
Thanks for watching 👍
Thanks for the tire guide, i wanted to install 265/70/17 w/o a lift, now i don't have to worry about rubbing. subscribed.
Did you go through with it? How'd it work out?
Still saving for it lol
My 265/70/17 winter tires rub in reverse
2nd gen with 265/75/16. Ready for a lift and a bigger tire.
I put on bigger tires on the first tire change. The only thing it hurt was the speedometer showed I was going a few miles slower than I actually was going. I heard it might affect fuel economy but I didn't notice a change.
What size did you go with?
@@RobMotive 235/75R15. This is for my 1999 Ford Ranger. I am looking at Tacoma or Tundra for my next truck. My wife drives a Lexus RX350 and I like the product so was looking to replace my truck with a Toyota product.
Thanks for the research. I’m probably going to do the same thing you did. 2 inches in the front on my TRD Sport. 275/70R17 with Wildpeaks. Thanks again…
I love my setup. I wouldn’t change a thing👍
How was the set up because I got a 2inch spacers on my trd sport and think of going from 265/65/r17 to 275/75/r17 not sure if it gonna to rub tho
@@ruehem3219 do 265/70/R17 it’s perfect
If the middle number ie. /70R or 75R is larger does that equal more width?
Height
Thanks for the video, looking to upgrade wheels and tires on my wife's newly purchased17 tacoma. Putting a small lift in it first, but this is a big help, thanks again
Glad to help. Thanks for watching 👍
I’m still scared!!!! 😂 I plan on getting 285/75/16 ko2s. Stock wheels with 3/2 spacer lift. Wish me much luck 😂 thanks for the information I appreciate it
This is the exact setup I’m going for. Let me know how it goes
16” or 17” wheels are the best to use. 17” has the most available sizes in non E rated though.
I guess another comment since I was off topic lol.
So I am probably going to do the TRD factory lift, because when I purchased my truck I went out to the 5 year maintenance and 7 year drive train warranty. So the TRD lift will not affect any warranty and it comes with 3 years as well. That said, I do want to put TRD rims on and go with a more aggressive tire, maybe 265/75R16. My stock set up is 265/70R16.
Don't forget, you start changing offset you also start affecting bearings as well.
Definitely have to stay within specs if you’re concerned about warranty.
How is biggest stock with 16inch rim is 265/75r16 when the stock size on a 16inch rim is 265/70r16 unless you buy a SR-5 which is 245/75r16
That's what my manual says for 2014 Taco. It says 265/70r16. The truck I bought came with 265/75 r16. It doesn't seem to really rub but I'm wondering if they are the wrong wheels for this 4 cyl Taco.
Thanks for the great info bro!🤙 Just pulled the trigger on Falken Wildpeak AT4W's. 265/75/R16 On a stock 2019 Tacoma Off Road. Can't wait to get them! Your guide helped me choose the size. Thanks again!
Glad to help👍
3” with 285/70r17 is what I have and it’s perfect, no rub
Hello Rob. I've seen plenty of large trucks running those rubber band tires. They don't even look good to me. Enjoy watching your TH-cam channel:-). Thanks for all you do!
I’ve seen those! Very strange looking😬
Howdy Rob, good video. I’m running 295/70/18 wild peaks on my tundra. No rubs. 3-1 lift. On SCS, 18in Ray 10’s.
Nice👍
I have 275/70 R17 with stock TRD Sport wheels on my stock TRD Sport. No rubbing at all. Didn’t have to trim the fenders & I didn’t need spacers. But it is millimeters from the upper control arms. 😬
This is exactly what I was thinking for mine ‘22 Sport. I’d love to see how yours looks before I make the purchase. Anywhere I can check out a photo or two?
can we have a photo to see how look please I'm thinking falken wp atw 275/70r17 I have second gen wich one u have?thanks
Hello! I really congratulate you, excellent video, I loved it, I have spent almost 5 months looking for information about it and you have been the only one who has provided it. However I have a question. I have a 2023 Toyota Tacoma Limited with R18 of factory (265 / 60R18), and I want to change them to about 275 / 70R18 as you recommend in your video, But it was not clear to me if I should place a lifting kit for her or not, if this should be 2 inches, and if I should put spacers on the sides or it is not recommended. Can you help me? Thank you very much
Holy Shit!! its about damn time someone put out a decent list!!! Thanks!
Glad to help👍
Thanks for that spreadsheet - looks like 275/70/17 is what I am aiming for. Now the question is with zero offset and a 2/1 lift if any trimming is needed...
Yeah…offset always throws a wrench into the equation 😬
Of course, we still need a spare tire. What is the largest tire that fit under the bed.
I wouldn’t go any larger than a 285.
Yeah, I think I've seen that list online before. Right now, I'm doing my homework on skinny pizza cutters, 255/80R17. Since mine is my daily driver, less road resistance and better fuel mileage may be the way I roll... LOL! 😎
Keep us posted, I’m thinking of doing the same.
Same here I read that they’re 33.1
255/85r16
I ordered the same size 255/80/17. They should be coming in this Friday. I went with TOYO Open County A/T 3
How did these tires fit? I’m looking for the same size right now and can’t find anything on them
The smaller the rim the better it looks ! Prefer huge tires with small rims
I went wild with my 2013 Tacoma . I put 285/45r22 . I don't feel it bumpy while riding . It does not rub after i removed the plastic factory mudguards..
How many inches did you get the lift kit?
@@angeltiz80 i dint get a lift kit. I only put a leveling kit in the front. I think it's only lifts about 2 or 3 inches....
Aloha and good evening Rob 🙏 ✨. Mahalo for providing this educational and very informative 👍 video. This is truly smart to making potential customers and modders aware on the maximum tires to use for no lifts and with lifts. You mentioned Titanic rims with very little tire tread wall. I've seen those on SUV'S and 4-door cars too in Oahu. Yet, a major pothole would give you a wonderful whiplash and a major busted suspension too. Yeah, I've seen those nutty mods as well. This is a terrific video Rob. 📹 Keep up the great work 👏 👍 💪 👌 🙌 😀. Miele Kalikimaka e' Hauoli' Maka'hiki Hou! (Hawaiian translation for saying "Merry Christmas and a Happy New Year!"
Merry Christmas Ryannew 🎅
Good Afternoon Rob, How are you doing? Well, I finally bit the bullet and had my tires changed from Cooper to Falken wildpeaks. Overall I like the look. I didn't go for the 275 70 17, only because I wanted to keep the gas aspects within the range. My question is that I went to Discount tires and after they mounted the tires, I noticed that on the dash board the tires gauge did not tell me the amount of air on each tires. How do I get it to show it? Take it in for a front end alignment? It rides well overall.
It takes a few minutes of driving for the truck to pick up the sensors. If you’ve driven for a while with no reading, take it back…something is wrong 🤔
@@RobMotive
I went ahead and set up an appointment for Saturday afternoon close to home. The discount tire is 40 minutes away. Appreciate the response 👍
They either didn’t initiate the sensors, didn’t put them back in or used a version that is not compatible with Toyota🤔
285/75/r16 can fit on factory just have to do some minor trimming. Thats what im going to do to save my warranty lmao
Awesome video thank you so much!! I'm actually in the market for new tires this helps so much!!
Glad to help 👍👍
Outstanding vid / very informative. Thanks for posting.
Thanks for watching 👍👍
I recently bought a 2018 Tacoma from a dealership and it already had a lift and wheel spacers on it, but it came with the stock wheels. The dealership didn't know any details about the lift height or any of that, so I'm not sure what I even have on my truck. So I guess I need to determine what lift and spacers I have before I go to get wheels and tires for it. Still a good reference video for when I do figure it out though.
265/75/16 with only a -6 offset and I get minor rubbing when turning on uneven pavement or when I have multiple people in the truck that weighs it down. I’ve been told to get a leveling kit to elevate this problem. It rubs on the front fender well when it does rub.
Bummer! Can’t stand any rubbing 😡
I’m on a 3/2 lift with 20” rims. Currently have 265/60R20. After a ton of research I’ve heard that going to a 265/55R20 would fix the rub issue. What was your experience on the 20” wheels? Would this combo fix my issue? Thanks.
Loved the look of mine, but the ride was too rough. Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
I ordered a 2023 tacoma offroad and took the factory lift lit (2”front 1”back) i was looking forward to put 275/70R17 right when I’ll receive it.. your video just confirmed i can but what about spare tire? Gonna need same size because i will go off-road with it.. will a 275/70R17 fit underneath the truck as spare tire?
Thanks
Have a look: th-cam.com/video/5RQajpdwTg0/w-d-xo.html&feature=shares
I’m confused by the chart a little bit….isn’t a 265/75 taller than a 265/70? It seems that according to the chart that the rim size is effecting the tire height. For example….how can a 265/75/16 be one inch taller than a 265/75/15 and also a 265/70/17 be taller than a 265/75/16?
Or am I just wrong in what I think the tire sizes are?
Love your channel straight to the point no BS. I have a few questions I just purchased a 2023 Tacoma SR5 tire size 245/75R/16
I want to go up to 265/75R/16. i’m aware that I don’t have to use a lift for this set up. Now I want to go up 2 inches in the front and 1 inch on the rear. Do you recommend spacers, or Bilstein B8 5100 set up. The most off road it will see is visiting family in Vermont and Upstate NY in winter months where the snow will be deep , I live in hot ass FL so now off road here. I want to do the job right I want to know if the original shocks can handle the extra weight of the tires ride quality and dependability. If I can get away with the Rough Country front and rear spacers that’s fine if not so be it.
Here’s what I’d recommend : th-cam.com/video/rMU9fKxBGA0/w-d-xo.html
@@RobMotive thank you
Very informative...thank you!
Thanks for watching .
I watched the video hoping to learn if I could put 2nd generation tacoma wheels on my 1st generation Tacoma. I currently have stock 15 inch wheels with 265/75r15 tires. Can I put 245/75r16 wheels and tires from a 2015 tacoma on my 2000 tacoma??
Hey rob. Im planning to do 3-2 lift and put 285/75/16, do you think it will cost any problem? Love the channel!! Thankss
Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
What about 255/85/r16 ? Love those tires. Define definitve.
What changes when you adjust the offset? I have a 2”/1” level on mine and want to put on some 17” wheels that stick out just a bit further…. Can’t find the right tire size or offset yet.
The wheel/tire moves in or out.
What about a 2009 Toyota Tacoma with a 6 inch lift? Can I keep my stock rim and put on a bigger tire? I have 265 /75R16
I'm confused, I bought Wrangler Duratrac 265/70/R17 online for my 2013 Tacoma because I wanted to go from the stock size (16) to a larger one (17) and when I took the truck to get the new tires installed they told me it wasn't possible because it sits too close to the fender, what is the correct size to be able to put 17" rims on then?
I can’t speak to a 2013. I’m sure the space is different.
I’m thinking keeping the factory height with 265/60-18 with-12 offset rims. Will there be any problems. I want a stiffer ride for cornering.
I have a 2018 Toyota Tacoma with the stock TRD Rims . Will the new 2023 Toyota Tundra rims will fit with my 2018 Toyota Tacoma???? Let me know please
Ive read a lot of testimony that 255/80/17 pizza cutters will fit a stock tacoma with no rubbing or mod
What if I’m running 305/70r16 on a two inch lift-ish with no rubbing whatsoever and it pushes passed the fender flares, what could I possible run on my truck, do you think 33s on 20x12 wheels would work?
Yo Rob, you mentioned stock offset twice without saying what it is. Is that a zero offset?
It's +30.
What if I want to go wider what size can I do with no lift .I have 265 65 r17 stock on my Tacoma?
All the info is in the video👍
I have a 04 Tacoma with a 3 inch lift and 16 inch rim what is the tallest tire i can go with ???
Hi Rob enjoyed the video’ want to ask I have 16in stock wheels on my 2015 Toyota Tacoma can I go with a 17 in stock wheels and will I get the same smooth ride?want to go with 265/70R-17 tires,
The more you reduce the treadwall, the rougher the ride will be.
Rob with all of your tacomas what was the best tire you installed with the less road noise. I have Nitto ridge grabbers very noisy
Falcon Wildpeaks. But you’re gonna have noise with more aggressive tires😬
And what offset do you run or suggest negative 8,10,12 or positive ???
I’m running -10
Just curious Rob. I have a 2019 limited with 18”. Is that chart for a 2019 model too? Or just newer? I’m looking to buy tires same stock wheel. So if I got the 265 70 18 I shouldn’t have to worry about rubbing correct?
The chart is for 3rd Gen Tacomas👍
285/70R17 with 3/1 lift and love it👍👍
Nice👍
Would your tire size guide pertain to a 2014 Taco?
I believe the dates covered are on the chart.
So my manual for my 2014 base 4cyl. taco says max size for 16" tire is 265/70. I just bought it and it came with 265/75's. I don't think there is a lift on it. Should I be worried?
Only if it hits or rubs.
Hey man I got a 1998 toyota tacoma Ingle cab low I want to put a 2 or 2 1/2 inch I wouldn't like to look to high but like if it was factory lift what size tires and wheels should I buy that it wouldn't rub. Thanks good info by the way.
Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
I don't have any issues with
285/70/17s zero offset on my SR
@ken do you have factory suspension or are you using a lift? If a lift, what is your setup? I am looking at lt285/75r16 and wondering what/how I may need to prep the truck
@@JediGokuLee no lift
All stock. Very little rub at full turn in left reverse
Can i buy new rims the same size as factory but with an offset? i just want a negative offset dont really wanna put a lift on it at this point. it s a 2022
I’m sure you could.
@@RobMotive Thank You
I wish the chart mentioned 255/85 R16
Thanks for making this video!
Thanks for watching 👍
Can you give me some insight as to which wheel would have the least amount of issues with a 2" lift? 18x8.5 - 0 offset (4.75 backspace) or 18 x 9.5: -18 offset (5.4 backspace). Aiming to go with 275s or 265 tires, no way am I going with 285s. Greatly appreciated as I'm torn and can't find decent pics online of the fitments.
Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
I am planning to add 3/2 spacers and put 285/70/R17 on my TRD Sport Stock Rims.
Does anyone have experience on whether they will rub?
I mainly drive onroad but in the near future (Spring/Summer) will be going on trails and gravel roads.....not any major offroading.
In case anyone is wondering why that tire size, I was able to get 5 tires from someone with 3k mules on them for $100 each, couldn't pass it up.
Thanks! I needed to know this.
Glad to help👍
@@RobMotive great help! Someday I might lift my 2020 trd off road, but mostly just want to buy some BFG KO2s & if I can gain an inch for now I’d be happy. Thinking about keeping these wheels and tires and buying a set of black steel wheels for new tires, the factory tires do pretty good off road in mud and in snow, truck does amazing and with KO2s I think it’d be unstoppable. Thanks for making this video huge help, and thanks for telling us about the rub with your new tires you got, love that your honest and give us the truth about everything you install! Great content! Thanks again!
I have 2013 prerunner v6 2WD can I fit 265/70/17 on my 17” rims, anyone know?
Yup that’s fine, unless it’s something like a mud tire, which typically comes with a much more aggressive tread that can possibly cause rubbing.
The factory of the tire that my truck has, is 245 / 75/R16 I want to change for something bigger, what you recomend to do this?
Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
Thank you for the information 🙂
Thanks for watching 👍
I fit a 265/60r20 on mine stock
OkayRob, you got a sub and a bell ring. I have been seeing you vids show up (maybe because I am modding my Taco), and I plan to put the TRD lift on, as well asbetter tires and I like the TRD rims maybe. Research now, do it when I know.
Thanks Rob for the great content.
BTW driving a 21 Tacoma TRD Off-Road.
Thanks Big D! I appreciate that. Lots of ideas on the channel to keep your wallet on the light side😃
With a 3 inch lift Rim 17, the 285/70/17 will fit with no rubbing ?
Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
@@RobMotive Oh believe me I watched the whole video, I just want to make sure. You have one of the best comprehensive videos on tire size. I just want to make sure there wouldnt be any rubbing, or would it depend on the offset of the wheel? TRD sport tires have like +30 and I dont know if it will fit those 285 without rubbing on the upper control arm. Any help would be much appreciated!
The wheel offset can certainly make a difference. I can only speak first hand for my setup 👍
maybe try 255/85R16 or 255/80R17
Hello. Have you check the 275-65-17 in Tacoma 2019 TRD sport? Thank you
Hi Rob, do you know what the offset is on the factory 16 inch wheels on the 2021 Tacoma? I can't seem to find it
I do not🤔
I would love to know that too
what would look good without rubbing or anything with a 2 inch level kit just in the front
That depends on what you like. Only you can answer that👍
@@RobMotive what are my options
@RobMotive I notice u had a 2 inch In tge front and stock in the back is there anyway I can get sum pictures of your truck?? with rim and tires sizes I'm kinda new
Just search RobMotive wheels or tires on the channel. There are also tons of pics of all my trucks on the channel, IG and FB👍
@@RobMotive is it the lime truck that u just have the 2 inch lift in the front?
Is there a way to recalibrate speedo, etc when up sizing tires? Thanks Rob
I’ve heard there are some dealerships that will do it. Also heard there are some aftermarket plug in solutions, but I’ve never done either.
Can I put 17's on my stock TRD off road 2015? because I just bought the trd rims for it.
Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
Hey Rob, I put 17 trd rims and 265/65 17 falken wildpeaks on my 2015 trd offroad tacoma and it looks and rides fantastic!!, no rub at all. Thanks for the video!!
Great to hear👍👍
Rob
I have a 2022 SR 4cyl engine.
How having 4 cyl will affect the performance with 265/75-16 tires?
Thank you
Al
I have a 2020 Tacoma utility model with the stock 16" steel wheels. Charts tell me 265/75R 16 tires will NOT fit. It looks like they will rub on the upper frame section. Any idea if this is truly the case. I want to go to the 265/75 size when I get new tires but not if they won't fit.
Stay tuned. I have a video coming on that👍
@@RobMotive is the video out on this yet?
I’m looking to go 265/75/16 on a stock truck/wheels. On 2019 Tacoma SR. Wondering if that will do any rubbing.
It should be fine right?
Basically, all can be 1 inch taller and same width !
i have 235/85 r16's and I love them! I'm sure that you can actually get a 155/85 r16 with no mods as well.
I wish someone would do this for the Nissan frontier
Do you think I can fit 285/70/17 if I go with a 3/2 spacer lift? I don’t want any rub issues.
Depends on your wheel offset. Probably need at least 3.5”.
@@RobMotive what is the stock offset on a TRD off road?
How about a 4 inch lift gen 3 ?
Going to need to address several other components for that.
@@RobMotive im on 285 75 16, 16x8 and 1.25 wheel spacers. Ive done CMC, pinch weld hammering, and viper cut. Being 2.7 5speed is my limiting factor. But i do have the itch to go bigger already. I really like the cbi offroad oversized fender kit with cab mount relocate.
Probably going to start cutting into performance with the 2.7 as well.
@@RobMotive already well into that. I have bumpers, sliders, winch .. etc. im pushing it lol.
@thumperbangin2000 The suspension upgrades will be a lot more….
Which one of these tires will have a smaller profile the 275/70/R17 or the 265/70/R17?
Plug in the sizes at tiresize.com and you can see them side by side 👍
@@RobMotivethanks for the website. I'm leaning towards put a 245/60/r20 on my Tacoma. I like the low profile look. How would I go by figuring the rim that can fit that tire size and Tacoma lugs?
R20 requires a 20” rim. R18 requires an 18” rim and so forth.
Will a -12mm offset cause problems for a Tacoma 265/65/R17?
I want to go at least 17" but I want to stay stock/Toyota. Anyone know what other Toyota's/year fit with the same offset?
Just got trd pro wheels, I want to fit 285/70/17 or 285/75/17 , would a 3” lift be okay?
Have a look: th-cam.com/video/pbZnuhRPkEY/w-d-xo.html
Will 275/65r/18 fit with no rub?
Ur the man
I have a Bilstein 5100,a 2.5 lift and Eibach aal with a 285/70/17 Wildpeak tires and a Method 17x8.5-0 wheels, and installed a 1.25 Spidertrax wheel spacers, had a bmc done and did some minor inner fender trimming, i'm now thinking of upgrading to a 17x9-12 offset, leaving the spacers on, I just wanted to have a little bit of aggressive look, since I don't off road anyway. mostly going to shows and highway /street driving. I watched the video all the way..didn't show the chart !
Is this applicable for 1st gen’s?
I would say not.
Would 265/70/17 size ko2's on a no lift '21 tacoma cause any rubbing?
Have a look at the chart in the video👍
You can't run a 285 on a stock rim with a positive 22 offset you're going to rub the control arms you're going to rub the sway bar you can't do it you need to have more offset.
What about 33”x12.5 on 20” wheels with a 3” lift you think it will rub?
@@splocal what's the offset?
@@kevinmeldrum1 -44
@@splocal will rub in the front and the cab mount maybe the sway bar too.
@@kevinmeldrum1 damn, guess I’ll have to wait for that 6” lift then, thanks!
Super helpful
Awesome 👍
Rob question with right mods you can change a sr to sr5 correct?
Or at least get very close.
@RobMotive ok. Thanks
Any suggestions I have gotten black rims. What else little could I do to get it closer?
I’m would look up the specs for what is included on the SR5 and add what you want.
Does this apply for 1st generation as well?
I would say not.