Ty so much within 30 seconds I programmed our 2022 lexus 350l. I highly recommend this gentleman to watch. Very straight forward and simple instructions. Ty again.
The instructions did not work until i erased my existing codes on my actual garage door opener. Then, programming the transmitter(s) was easy and worked. None of these videos mentioned that as a possibility, maybe you can add a note or shoot another... just a suggestion. with that said, thank you for taking the time and making the video
I already have button 1 and 3 programmed for garage doors. I am trying to program button 2 for a third door. I didn't want to push 1 and 3 simultaneously because I didn't want to erase them. My third door opener has a rolling code. I pushed the learning button but it doesn't work. Is it because I haven't cleaned out the existing codes? As far as I know there are no codes on button 2 but I could be mistaken. If I press 1 and 3 will it stop those first two doors from opening?
Most programming that DOES NOT INCLUDE pushing the learn button ON the opener itself will not work. But all openers are different. I’m glad this works for some.
DIY GEEK I would imagine all Toyota/Lexus cars learn the same... it’s the openers that vary. We got our entry gate to learn with the issued remote but my older Genie GDO needed the learn button pushed.
The manual on my 2020 IS doesn’t say to hold the two end buttons first and maybe that’s why I haven’t had it work?!?! I’ll try this tomorrow unless anyone knows otherwise?!
After you press the LEARN button on the motor, you have about 30 seconds to press the opener button in your car (keep your car park close to the garage - but NOT under the garage door as it will be opening/closing when working)
Other videos gave me steps that were slightly off and this one gave me the right steps. Thanks!
Ty so much within 30 seconds I programmed our 2022 lexus 350l. I highly recommend this gentleman to watch. Very straight forward and simple instructions. Ty again.
So much easier than reading the book. Your instructions worked perfectly. Thank you for the quick explanation.
This was such a time saver. It was so easy to program. Thank you.
Thank you so much for this. It worked.
your technique works for my garage door thank you
Worked perfectly! Thanks 😊
Thank you, quick and easy...
You are amazing, man. Thanks a bunch!
This video helped me thanks
You just saved the day! Thanks man
The instructions did not work until i erased my existing codes on my actual garage door opener. Then, programming the transmitter(s) was easy and worked.
None of these videos mentioned that as a possibility, maybe you can add a note or shoot another... just a suggestion.
with that said, thank you for taking the time and making the video
Still works in 2024🎉
thank you so much with this video! sometimes the book dont make sense lol
Thank you!!
Nice!
I already have button 1 and 3 programmed for garage doors. I am trying to program button 2 for a third door. I didn't want to push 1 and 3 simultaneously because I didn't want to erase them. My third door opener has a rolling code. I pushed the learning button but it doesn't work. Is it because I haven't cleaned out the existing codes? As far as I know there are no codes on button 2 but I could be mistaken. If I press 1 and 3 will it stop those first two doors from opening?
Thank you.
Thanks!!!!
Most programming that DOES NOT INCLUDE pushing the learn button ON the opener itself will not work. But all openers are different. I’m glad this works for some.
It works for my car specifically the Lexus RX 350
DIY GEEK I would imagine all Toyota/Lexus cars learn the same... it’s the openers that vary. We got our entry gate to learn with the issued remote but my older Genie GDO needed the learn button pushed.
The manual on my 2020 IS doesn’t say to hold the two end buttons first and maybe that’s why I haven’t had it work?!?! I’ll try this tomorrow unless anyone knows otherwise?!
How can I program it without a physical garage door opener? Press the learning button in the garage? Then what?
After you press the LEARN button on the motor, you have about 30 seconds to press the opener button in your car (keep your car park close to the garage - but NOT under the garage door as it will be opening/closing when working)
Didn’t work for me 😫
Thanks!!!!