Set-Up Your Car HomeLink To The Garage Door
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Set-Up Your Car HomeLink To The Garage Door. Easy HOME LINK Programming Instructions.
95% of cars program just like this. Home-Link programming is super easy! Universal Garage Door Opener Programming
How To Program Your HOME LINK buttons In Your Car. Most cars now a days have this feature. Why hire someone to do a job so easy. Trust me you can do it!
~-~~-~~~-~~-~
Please watch: "CHI Model 2240 FLUSH Panel Garage Door"
• ➡CHI Model 2240 FLUSH ...
~-~~-~~~-~~-~
If this video helped and made sense PLEASE SUBSCRIBE!!
Trying to reach 100k before I leave this rock. 🌏👊🏼
THANK YOU. Neither the garage door opener, nor the vehicle manual were fully correct. This video was spot on.
You're welcome! 🙏
Well done sir. Watched two other videos wasted time I’ll never get back. Nobody said anything about hitting the learn button then hitting your car button 3 times. Worked. RESPECT ✊ 🚂🔥🔥
Thanks for the feedback P!! 🙏💯👊🏼
Wow! The video is 7 years old and still amazing. You helped me get my car linked in a few minutes. Your instructions were very clear and easy to follow.
I've been through manuals and about a dozen YT videos ... and nothing worked. These instructions include some steps missed by the other guys and it all worked! Thank you!!!
I appreciate the awesome feedback!
Yep, this video is still going strong.
#oldiebutagoodie
Awesome job with this video. I was able to connect to my Ryobi garage door open with just a one time view of your video. That’s how well you explained it. Kudos to you. For anyone out there that might have a Ryobi GDO the “Program Button” is the learn button. Hold that for 3 sec then just listen and follow the step by step of this awesome video.
Thank you for the great comment! I'm glad my video helped.
Omg thank you. In the past 1.5 hours, I've watch a bunch a videos and tried so many ways and none of them worked until right now!🙏🏾
Thanks! Your video was the only one that explained about the learn button/push car button 3 times. That did it! Appreciate your video and help!
Glad to help!
Thanks for the comment.
Thank you very much. You just saved me from the headache of not knowing how to connect my home link to the garage door.
Glad to help! 🙏
It worked with an aftermarket remote control, thank you
That's awesome! Thanks for sharing. 👍🏼
Nice job Richard. Your instructions worked perfectly for my 2013 Ford C-max! I would point out that the instructions from the home-link and Chamberlain (manufacturer of my opener) are both wrong. A couple of what I think are helpful comments. 1) Make certain that the units remote is only a few inches away from the home link panel. I don't think you mentioned this. This is very important, or it will not work. 2) The learn button on my 2020 Chamberlain B-750 only flashes once when pushed, it does not continue to blink. This may be unique to my model. THANKS AGAIN - GREAT JOB!!
You're welcome Tom! Thanks for the comment.
The only accurate TH-cam video on this. Thanx
You're welcome 😊!
Thanks! After following similar videos your was very clear... Now mine works...
Glad to help!
Thank you! You're the only one who got it right.
Awesome 😊!
Glad to help.
Your instructions worked for us... thanks for the clear teaching.
You're welcome 😊
Thanks for watching!
Best video!! So helpful!! Thank you so much!
No problem! Glad to help. 🙏🏼
Thank you so much ….. that was easy
Glad to help! 👍🏼
Thank you for explaining so good !
You're very welcome!
THANK YOU IT WORKED. YOU HAVE TO HAVE THE CONTROL!!
Yep, gotta have a remote!
great instructions....we have a honda pilot...worked great!
That's awesome! Thanks for the comment. Helps others.
Thank you thank you......best video. It worked!
Glad to help! 🙏
Straight forward. Just did mine. Thanks
You're welcome 😁!
Thanks for the instructions
🙏
Awesome job. 5 star
@@ronnieweaver1664 thank you for the comment 👍🏼.
Bless your heart. Will try this and see.
You got this! 💯👍🏼
So easy, thank you!!
You're welcome!
Thanks for the tutorial my friend. Now does this process work for most vehicles remotes and garage remotes or do I have to hunt down the one that’s for our car and remote garage opener?
Thanks!
I really appreciate the donation, Don! That's super thoughtful. 🙏
Thanks you for helping me program mine!
You're welcome 😊
Thx
Glad to help!
This helped out a lot, ty!
You're welcome 😁!
Can we use a 892 or 894 for Sliding Gate and program with car Homelink?
As long as the gate opener is a LiftMaster product, absolutely!
Know I need help with my wall pad lift master lights blinking but I have no control to close the garage door only with my remote control and car remote, need help.
Which lights are blinking? The button on the wall or the machine itself?
If it's the machines lightbulb, does it flash 10 times?
谢谢 很大的帮助！
Translation 🥺. Hope you're saying Thank you! In that case, you're welcome!
Hi, when I tried this, the 2nd step never flashed fast. It's a Craftsman garage motor.
My Stanley garage door mechanism has two learn buttons, one up and one down. Do I press one button then go to car’s homelink button and press. Then repeat for second button? Or do I press both learn buttons at same time then go to car and press homelink button?
Hmmm.. shouldn't be 2 learn buttons. Those buttons are to set the up/down limits.
Do you see where it says remote? That's the button you need to push.
Garage Door Genius Yes, there is a remote button! So that button would be the same as a learn or program button? Thanks!
The exisintg codes in my 2012 KIA clear in the first step you describe, but when I press my remote and my chosen HomeLink button simultaneously, I never get the flashing HomeLink light, just the slow blink. As a result, step 3 doesn't work either.
@@dougthies4649 sounds like you might need a HomeLink repeater. The car isn't picking up the remote signal.
Liftmaster 855lm Chamberlain OEM Homelink Compatibility Bridge a.co/d/7O9ntFP
What brand of garage door opener and what color is the learn button. LiftMaster Chamberlain (yellow learn button) ?
@@garagedoorgenius Thanks for the link...after reading the comments on the bridge it looks like this is a very common problem with newer openers and older cars. I have a LiftMaster model 81600 manufactured in 7/24. I need to verify that the bridge will install above my opener without any major ac power wiring changes.
@@dougthies4649 let me know how it goes!
Thank you!
You're welcome 😊!
Success! Thank you!
what about if the gated community motor is locked and i cannot press any learn button?
Do the steps minus the learn button. See what happens.
Ok…. The first door works, now how do you program the second door.
The first step , pressing button 1 & 3 together erases my first door
Program. Would be nice to see you continue onto the second door.
To program the second door just skip that first step.
Thank you.
One more question if I may.
I came across one video that said “ DO NOT RUN YOUR ENGINE” just put your ignition
In the ACCESSORY or ON. Position.
@@peterfaford9157 as long as it's in the on position you're good.
When you program homelink with the remote, will it make the remote not work with the garage door? Or will both the remote and homelink work afterwards?
Both will work. HomeLink doesn't cancel out any other remotes, keypad.
What do you do if your #1 button is stuck. How can I reset?
Try and unstuck the button. Lol
Never had that before.
Rich, you imply this works for all cars with homelink, but Chamberlain told me that's not so. My opener has a yellow reset button and my car is a Toyota Solara. I couldn't get the Solara homelink to interface with my just purchased in 2020 Chamberlain C205s. When I called Chamberlain tech support, I was told that the yellow reset was the problem, and the only way to get around it would be to buy a bridge devise. So I suspect your 95% number is very wrong. Wish I had known that before buying the openers, but now I'll just stick with the Chamberlain openers that clip onto the driver's visor.
Yes most vehicles 2013 and under need a HomeLink repeater with a Chamberlain LiftMaster yellow learn button. The models before the yellow learn button programmed right up to any make/year without a repeater.
FYI, this video was made before yellow learn button hit the market. 😬
Does the car have to be outside of the garage?
Nope
Tried my identical car that you had same. Garage door opener still didn’t work.
Thanks it did work lol
Awesome 👍
Thank you it worked for my new car but now neither my other car or my remote will work. How do I fix that please!
Sounds like you erased previous codes. Press the learn button in and let go. Take your remote and press it in and out until the door raises or closes.
Then reprogram the other car 🤘🏼🤓🤘🏼
Ok thanks I reprogrammed the remote and three cars! Thanks! Any suggestions on reprogramming the key pad on the front of the house?
@@pamelathurston4571 awesome!
What brand is the opener?
Chamberlain@@garagedoorgenius
@@garagedoorgenius chamberlain
I need to know how to set up Homelink WITHOUT a handheld garage door opener. On a new 2020 Hyundai Tucson. Please! TIA
If your HomeLink is a universal, you won't need a remote. It should be similar to the steps in this video.
th-cam.com/video/468CpuChW3Y/w-d-xo.html
FYI, a lot of HomeLinks require a remote.😬
Garage Door Genius Thank you so much for your quick response!! After I posted my comment, I found a video where you presses the [garage ceiling unit] button, then the one Homelink button you want to use 3 times. This didn’t work. How can I deduce if the garage door opener is universal? I am baffled this is so difficult on a brand new vehicle. The car/ garage belongs to my older neighbors; I REALLY want to be able to make this work for them. Again, thank you. ps I called the dealership; they didn’t know how to work Homelink 🙄. They gave me a phone number to Homelink; it is an automated system with only the oversimplified instructions recorded....
Garage Door Genius Wow- this blows my mind, I guess. Handheld remotes seem fairly few & far between. Meaning Homelink has been around for quite a while now, so people loose track of their handhelds.
@@50tmack I'm with ya on that. Should be as easy as pressing the learn button, then pressing the button in the car a few times.
But, like I said, most need a remote unfortunately.
The owner manual for the car should give half way decent directions. See if it shows them using a remote. It also should say whether or not it's a universal HomeLink.
Wow! The video is 6 years old and still amazing. You helped me get my car linked in a few minutes. Your instructions were very clear and easy to follow. Thank you!!!
I really appreciate the awesome comment! Thank you for watching. 👍🏼
Thank you!
working perfect man, but my car toke 5 second for the light to start flashing not 20 second i think it depends of the car model, thank you
Did your remote garage opener not work afterwards? I guess I'll reprogram that now.
Thank you, but mine isn’t working. I don’t have the remotes for our chamberlain LiftMaster, and I have a new 2024 Honda pilot. I’ve done everything you said but it’s not working. When I hit my button three times, the second one turns it back off. It’s like an on off button
You're welcome!
Try this video out.
th-cam.com/video/RW9kauTNiac/w-d-xo.htmlsi=gGEBHHIB-0tlA4iy
Thank you!!! This is the fifth how-to video for resetting HomeLink that I’ve watched today, but the first on that describes Both necessary steps and how they are connected (1-learn from remote, then 2-learn from Learn button inside operator). I struggled for over an hour before finding your video!
Another quirk I notice is that no one explains why my HomeLink light is red and others are green, but apparently it doesn’t matter 😬
All it took was finding my vid😁.
You're welcome and thank you for watching!
Thank you, thank you, thank you!! I have tried countless times to do that prior to your video and was unsuccessful. I walk through it with you one time and it works. Much appreciated.
Thanks for the awesome comment! 💯
Genie Pro Max opener .. Old 1995-1996 era opener. Tried a ton of other videos and nothing. Yours was spot on!!! The trick for me was continuing to hold the garage door opener button a few more seconds during initial programming even after the door had completed its cycle and wait for the light to indicate. Then the Learn button and 3 slow steady 1 second push.. Thank you Genius man !!
🔥🔥 AWESOMENESS 🔥🔥
You're welcome and Merry Christmas 🎄.
This video is great! All Homelink videos and Chrysler 300 videos mentioned standard programming OR a rolling code. Overhead Door company did the same as well. Yours is the only video that explains that you might have to do both. So I synced the remote AND programmed with the learn button on the opener. Worked first time. Thanks again!!! Randall
Hey glad to help Randall! 👍🏼
Great video. Very helpful. Besides being spot on, the added drama of you NOT PRESSING THE HOMELINK BUTTON in the final step had me on the edge of my desk chair. Well played, sir. Well played.
@@jonkirkwood469 lol, I appreciate the awesome feedback 👊🏼. Thank you!
I tried syncing my Genie garage door opener (2015 model) with my 2014 RAM, 2014 F150, and 2024 Expedition multiple times and not of the Homelinks synced with my garage door opener. Any Suggestions????????????????
Try it with the car in the garage. If it works, then you have a weak receiver in the opener.
Can you also program entry/exit gate to a gated community this way (yes, we have the clip remote).
If so, I suppose you would need to park the car near the gate while programming?
Thank you. This video was very clear and easy to follow.
@@SoozyQ333 some gates you can just skip step 3, continue to step 4. 👍🏼
wait..... so you have to do the remote step AND the learn button on back of opener step to complete the programming? Or can you just do 1 of the 2 steps?
@@BR549_o7 do both steps. You have to train the car with the remote. Once that's done the car essentially is a remote. Then you have to activate the learn button for the new remote "car" to learn it.
I looked over 6 videos and this guy instructions are simple and easy to understand, thanks so much 5 stars!!!!!!!!!!!!!!
@@MikeMoreira-h2u hey I really appreciate the 5 stars!! 🙏🏼
Wow, after years of owning my BMW, I just assigned one of the buttons. Hello! Thanks for the tutorial
Awesomeness 😎👍🏼!!
You can’t pair 2 of them to the same signal if u connected the remote to the first button all the way to the left you can’t do that in the car .. u will have to use the middle button or the third button to switch up the signal I was going crazy trying to figure out y it wasn’t connecting until I tried the 3rd button on my cars homelink remote .. connected perfectly
That's weird. Your car must be in a bad mood or something. I've connected the homelink hundreds of times using the first button.
Will this work on gate opener, I did first part programming my 2020 GMC truck , i reset it then put remote next to it and starting blinking fast, gonna see if gate opener has learn button,. Which I'm thinking yes, that's how I programmed all remotes
Yes sir! It'll work. Find that learn button on the gate.
TY! I have the instructions from Genie and the instructions from Toyota but neither worked. Your video showed me that I basically had to combine the two! It works!!
That's awesome! Thank you for the comment and feedback. 👊🏼
My garage door opener on my car blinks A SLOW RED when u try connecting it to the remote- It’s Not connecting 😞
What year is the car?
I should have watched this 3 hours ago!!! Thanks, I was about to give up!
bchboy1206
Hey no problem and you're welcome!
On the otther hand, your procedure worked great on our 2015 Volvo XC60. Maybe HomeLink in my KIA Soul is broken, although it worked fine on our old (26 yr old) LiftMaster opener? We just got a new LiftMaster opener.
@@dougthies4649 ah, that's why. New LiftMaster openers don't program to older and some different types of HomeLinks. Their older models were fantastic, no issues. But the new stuff is kinda meh...
@@garagedoorgenius Thanks for the explanation...intend to use the remote that came with the opener in the 2012 KIA Soul for the time being.
Just wanted to let you know your video was a life saver. My sister in law lost her clickers and when you said this can only be done with the handheld remote I used my remote clicker to program her car's home link instead of buying one. My question is this, now that I have her garage door set to the number 1 button which was originally for my garage door what steps do I need to follow to reprogram the middle button on my remote to open my garage door? She doesn't need the remote, I do. She only uses the button in her car for the garage door and I am keeping the number one button for her garage but I want to program the number two or middle button to open my garage door. What steps do I need to do to achieve that? Thank you again for helpful video.
I really appreciate the awesome feedback. If you have a 3 button remote. I have a video showing how to program it. Let me find it.
th-cam.com/video/eEPeMTjdmj4/w-d-xo.htmlsi=vCgKT7tq6NnFtxyq
@@garagedoorgenius Yes sir, it's a 3 button remote, thank you. The weird thing about it was the first button which is about double the size of the other two was the only button I could get to work.
@@66lwmorgan th-cam.com/video/eEPeMTjdmj4/w-d-xo.htmlsi=vCgKT7tq6NnFtxyq
I've seen a few videos. Yours worked! I have a 2017 Ford Escape Titanium. Thank you!!
Thank you ma'am for the feedback! 🙏🏼
Mine flashes green not red please help
You took forever to get to the point, but it was worth the wait… Thanks!!!
Yeah sorry. I know I was a bit long winded on this video. Thanks for hanging in there! 👍🏼
Couldn't wait a minute and thirty seconds for a sure fix (it worked for my car/garage), tik tok has ruined a generation
Thanks 🎉
Agreed. When you're sitting in your car trying to program, 6 minutes is like 20
Hey, I'm doing the best I can over here! 🤣
Stop searching everybody. After 10 videos even from the manufacturer this is the one that worked for me.
🙏 I'm sorry it took TH-cam so long to get my video in front of you. Glad you got it working!
I do not have a learn button. What should I do? Thanks
Do you have a remote control?
If so, do the steps in the video. But SKIP the Learn Button part. Go to the next step!
I’ve been on TH-cam the last 30 minutes no one has explained this two-step process everyone says do it with the remote but does not say also do with the learn button I really appreciate your time making this video
Glad to help! 🙏
Is there something you can do if yoy don't have access to the learn button? I want to program mine to my apartment gate
Try all the steps minus the learn button part. Depending on what type of gate opener you're programming to, it may work.
Worked for my 2011 pilot. Didn't work on my 2000 accord. 2022 liftmaster.
The 2000 you'll need a homelink repeater. 👍🏼
Finally, a video that helped me to link all of our cars to the garage door! That last step is what did it! Hitting the learn button and then the button in the car! I had to complete the first step too! I spent a few hours watching different videos and trying all kinds of things and nothing worked! Thank you so much for making this video! It worked for a GMC Terrain, a Tucson Hyundai, and a Subaru Wilderness! We have an old Liftmaster garage door opener.
That's awesome! Great job getting the cars programmed.
I appreciate the feedback! 😊👍🏼
Hi how do I un program the home link system if I do not have the vehicle due to divorce? Thank you
Clear the memory on the garage door opener. You do that by pressing and holding the learn button for about 30 seconds. Now there are other manufacturers the steps are a little different. But typically it's just pressing and holding and learn button for about 30 seconds. Then you'll have to reprogram your remote / keypad / your home link again.
Me as a Audi owner watching for 2 mins until i realized This video might not work for me 😐
HomeLinks are pretty universal across the board... Check my HomeLink playlist.
Thank you very much for the great video, it worked perfect on my new Hyundai 👍
Glad to help! 💯🙏
Awesome
Thanks Sam! 🙏
There are a number of TH-cam Videos on this topic. This is the one that got my car Homelink to work with my garage door. You present all the steps in clear and plain English. Many thanks!
I appreciate the positive feedback! 🙏
What if you don't have a remote for the garage,how do you program?
Look
What brand of garage door opener do you have? I recommend buying a universal remote. Program the remote. Then use the remote to program the car. Now you have a spare opener.
Bless you child 😜... I've been in my car watching the crappy MOPAR video 20 times. After watching your video got it on the first time.
You're welcome sir!
I'm having trouble zeroing out the memory for my Home Link
2006 Scion and new Craftsman CMXEOCG471 with learn button on wall multi-function wall switch as well as overhead unit. From the manual "IMPORTANT NOTE: If your vehicle is equipped with a Homelink®, you may require an external adapter depending on the make, model and year of your vehicle. Visit
www.homelink.com for additional information." What "external adapter"? I could not find any additional information on the HomeLink site. All of this worked with the previous Craftsman open which I needed to replace. Help!
Do you mean a repeater?
www.amazon.com/dp/B083G8F4NY/ref=cm_sw_r_cp_apa_i_K0pbFbGWN5HM7
@@garagedoorgenius my car is north of 225,000 miles so I'm probably not going to buy more gear: the new door opener came with two remotes, an outside code powered remote, the wall multi-function switch and wi-fi enabled door controls. The HomeLink always worked before (still works with my wife's door opener, in fact) So it's more a vanity thing, as well as muscle memory issue. Thanks for the reply!
My remote is broken. How do I program to the car without remote?
@@karenroberts8564 most cars need a remote. I would check the cars owners manual. It will tell you whether or not you need a remote.
it worked this time good, since i had o clear the memory
If no remote available you still can do homelike feom the baseachine.
Some cars, yes. 90% of vehicles you need a remote tho my guy. I've programmed hundreds of them.
You were the very first person that said you had to have a remote to program this. Thank you very much it literally took minutes.
You're welcome 😊
Thanks for watching!
You are a lifesaver! Worked on my older genie opener (although it didn’t like my newer chamberlain/wifi model)
How do you program the second button without erasing the first button
Just skip clearing out the Home Link step. 👍🏼
It worked to program my car but now my garage opener is no longer programmed.
Just press and release the learn button. Then press your remote button until the garage door starts to move.
Thank you very much for simple information and work
You're very welcome 🙏.
This worked on a new Toyota. Spent a while trying to get it programmed before finding this video. YT FTW. Thanks!
No worries! Thanks for watching.
New subscriber here. In your video you say you cant program homelink buttons without the original remote. That is how I have programmed previous ones. But the original remote is lost. I have a genie system with a learn button on it (don’t recall the model number of the remote). To get a functioning remote for the genie would I need to order a replacement remote from genie to program the homelink button? Thanks in advance for any help you can provide.
Thanks for the sub! I really appreciate it.
You don't need the "original" remote, just a remote. Which you can purchase from Lowe's, Home Depot or Amazon.
I've programmed hundreds of cars. Most of the time you need a remote to do it.
However, there are some vehicles that have what's called a Universal HomeLink. Which basically it's a remote built in. So no remote required. Your vehicle manual should say if it is or not. If your manual shows a remote "picture of a remote", then you'll need one. It's not a Universal HomeLink.
Hope that makes sense.
@@garagedoorgenius yes I purchased one at Home Depot. A genie 3 button remote. I also figured out I don’t have to unscrew the light cover on the genie if I am just pressing the learn button. Anyway, I was able to program my home link in the truck with that remote. Thanks for the video. It helped me figure this our. Have a great fall!
@@brentjohnson6654 glad you were able to get it done! You too sir, have a great autumn.
How do you clear the code for just one button on the gmc homelink?
You can't unfortunately. The clearing process on the HomeLink wipes all 3 out.
So this is for people who have access to their cars from inside their house or apartments. I don't, the only entrance & exit to my garage is from the main door.
I still programmed my car though.
Most cars have to be on for the feature to work. Now. There are some models out there that don't need keys or need to be on. I think as time goes on, technology is getting smarter.
@@garagedoorgenius I was already thinking, is the garage remote feature available on my cars digital key on the app? Cause that would solve all my problems.
@@LibraKing3121 if it isn't, that would be a GREAT idea!
I'm not sure my friend. I personally never seen one that works off the car app. However, most garage door openers are equipped with built in WiFi.
Great video. Thank you for the insight. 👍
🙏🏼
i did exactly as your video said but when you are trying to set up holding remote and pushing both buttons at same time the red lights never start blinking fast.Blink but slow and never change.What can be the problem?
What year is the car and are you trying to program to a Chamberlain LiftMaster garage door opener?
@@garagedoorgenius it is a Toyota Solara 2006 Genie garage opener
@@sandylake9417 ok thanks for that info. Ok, it should synch up. If it were me I would put in a brand new battery in the remote control. A weak battery sometimes won't make the connection to the HomeLink.