1 year later and this video just saved me. SD card failed so I needed to replace mine. I FUBAR'd the process and was able to properly recover it becuase of this video. Thank you
Thank you, this video is a lifesaver! I purchased a new OMP M2 EVO and Radiomaster TX16s at the same time, the new TX16s come with EdgeTX preinstalled an configured for the OMP internal Rx. Instead of just flying out of the box as-is and enjoying it, I thought I'd upgrade to 2.8.0 before ever using it. Big mistake... I didn't realize that I couldn't follow along with my Mac using the cable, it won't overwrite files that it says are 'busy', so I skipped them. The result was an upgraded operating system with incorrect control outputs. Go out and buy a MicroSD card reader and re-format the OEM card (or buy a new one) then follow the instructions in this video. It worked like a champ, all is well (back to stock). I'm leery now to upgrade to 2.8.0, since there are not many UT videos showing how to program the new M2 EVO with internal OMP protocol on the latest EdgeTX OS.
If it wasn’t for RCVR and John I’d probably still be on the version of openTx that my radio came with, he makes it simple to follow and explains everything down to a T, thanks once again for such a great channel John and all the amazing content, RCVR for the Win!!! 👍🛸🏆🥇
And if it met your needs and did everything you needed, what would it natter if it has the latest firmware on it. Personally, i go by the if it aint broke dont fix it mentality
@@RCVideoReviewswhen I plug in my USB plug into the radio it does not give me a prompt “USB STORAGE” instead it just says”USB” and is not recognized by companion or flasher. Not sure what to do so I can upgrade firmware. Help please
Ditto on the SD card recovery - clock battery replacement and somehow the sd card got corrupted - fortunately only some system files - so all models still on it - copied to disk and restored back. Thanks so much!
When I upgraded to 2.7.1 I somehow screwed up the max volume - or so I thought. With the volume set to max, I could barely hear the radio. I was at a loss until it occurred to me to recopy the voice pak. That worked. Evidently, some voice packs are louder than others, and somehow I got a quiet one. You've probably mentioned this phenomena in one of your many, many videos, but if so, I missed (or forgot) it. Thought I'd mention it here in case someone else does the same thing I did. Now I'm on 2.8 and all is well. Thanks to all your videos, I no longer have to sit in front of TH-cam for hours before I touch my radio!
The stock sound pack from Radiomaster was sampled wrong (it had deadspace too). I actually found that, told RM and Edge. I think they've fixed it by now.
Thank you John! You have the best content for Open TX/Edge TX. You helped me get my radio back to previous version! I was entertained in the process😆 Thank you for all the great content 👍
Edge is the made for programmers and not for pilots who want to fly more than screw around with complex settings and programming. I converted back to openTX on my Tx16s and am sooo glad I did.
Just not a true statement. You can setup a brand new model on EdgeTX in three clicks: th-cam.com/video/uSWH7f3_g6I/w-d-xo.html How much you ADD to that configuration is up to you. The core functionality of EdgeTX and OpenTX is nearly identical with EdgeTX refining and updating core elements of the firmware and adding modern functionality that doesn't exist in OpenTX such as making it touch friendly. But--your money your hobby. Have at it.
I made a boo-boo and deleted two channels by mistake. The channels were empty so no big deal. But how can I get these channels back. Thanks for all you do for us RC maniacs. Jeff.
I am having the same problem only left with models , radio , luar happened automatically maybe low quality sd card since it happened without I did anything so there is no backup with me so what should I do now ??
Hi John, thanks a lot for your tutorial series and all the efforts you've been putting in. I am all new to open radio software (EdgeTX + Radiomaster TX16s MkII) coming from Spektrum. I already updated my radio once to Providence and everything went well. Now, I just wanted to update to the new firmware version 2.10.0 (Centurion) and it happens that the radio does not want to turn on to bootloader mode at all. All my attempts (T4 +T1 inwards + power on) remained unsuccessful and the radio would simply turn on and launch Edge TX in the normal course. Do you by any chance know how to fix this, and could you help me ?
ok, made some progress. My radio is back to factory. But... USB still not connecting, :( I do get the pop up the select Joystick. Also, when I go in to Bootloader mode and then plug in USB to top of controller, I dont get the drives listed in Windows Explorer. Any ideas?
Hi ,I've a major problem with my tx 16s I have loads of images in my image folder, all good. BUT when I want to load an image on the model setup page it just shows me four models and that's it??? Can't load any other models from the image folder!!!! I have deleted all the folders and reinstalled them, But it's still the same!!!!. Any ideas Thanks. Keep them coming . Whats turn to bitmap for???
That looks like exactly what I would do is screw my whole radio up As I said in a previous comment I'm not good with computers at all I may have my brother trying to help me update 2 edge 2.8 But of course do a backup 1st Thanks for all your great videos John
can't extract radio/radio.bin I get this message when I try and Read models and settings from radio on the Open TX Companion software on my PC. Somewhere I goofed on the SD Card or setup of the Companion software. Any help would be appreciated.
They took it out as a standard option for 2.8 as so few use it. You can join their discord and they'll make you a version with the heli tab. I think eventually they want that to be a tab that can be turned on and off by a user. It's not "gone" per se, they just turned the tab off by default in 2.8.
Beyond Catastrophic failure. Hope you can help. Tx16s opentx backed up, attempted updating wasn't successful. Loaded from backup but there was no sticks showing on lcd screen. Guessed at which Firmware to load from Radiomasters site . No luck. And downhill from there. Turn on and warning NO SD CARD INSTALLED ; the card is installed properly. Anywho corrupt sd card etc. Can it be salvaged? By the by, I have learned much from your videos, thank you for all the hard work.
if you have only 1 model in your radio but in your SD card it shows like 7. ( happens often after sd card error and emergency mode) then add model2, model3text etc in opentx manually and you have all your old models back and your radio acts normal again this happend to me a couple of times. you start your radio and it seems things are missing, like your models but they are still there but somehow a folder gets stuck on having just model1 even after adding more models so if you find that folder in opentx and add the model names manually, it wil revert back the error and the models are visible again in your radio by adding those model names manually sound crazy but i have this happen a couple times after a sd error and emergency mode
Hi John hope your OK. Just one question which is bugging me ever since I've updated the lua script on expresslrs it no longer appears on the tools page when going into tools and have to go into the sd card content to access it
Strange. I've just downloaded another copy of the lua script, and to the best of my knowledge, nothing has been altered, and it works!. There must be a god, after all. Thank you again, and go easy with the turkey at Christmas 🎄
Hi, I'm in this predicament, and worst I didn't back up my SD card. What is worse than that is the dog chewed up the SD card. Now I have nothing. Had to get a new SD card. What do I do to get EdgeTX back on my TX16s with a new SD card? Thanx
Great how to video but it does not work for me... I am using a Mac and have downloaded/set up companion software on my computer. When I connect computer to radio, the screen on the transmitter has an image of a USB with "USB" filling the entire screen. Nothing opens on my computer and nothing further happens on the transmitter. When I open the companion program and select "read/write" for the radio (with it connected to computer after turning on the radio in boot mode and then connecting it to my computer) I get a message telling me the program is unable to read the SD card. Can you help me understand what is going on? Thanks in advance!
Is the radio prompting you for SD Storage, Joystick or Serial? If not, make sure in System settings the radio is set to Ask. Try a different cable, different port, reboot, try a different computer if available. Once you have a known working hardware config with the radio and cable, your Mac should work. Outside of that, you'll need to get some local help. Unfortunately, I can't get involved in troubleshooting individual USB connectivity issues. Good luck.
@@RCVideoReviews Thank you for your reply. Yes, I was presented with the 3 options and choose SD Storage. Since this did not open any folders on my computer (per your video), I opted to use the companion software (2.3.15 version) to back up my SD card. When trying this method, I kept receiving the "Cannot find the SD Card" message. Using an SD card reader, I copied the radio's original SD card contents to my hard drive. I then inserted a new SD card into the reader, copied the data from the hard drive to it and then followed your 2.8 update video to update the new card. I placed the new card into the radio and followed your instructions with updating the radio's firmware. After exiting that window, I was presented with a "SD card not functioning" message. I replaced the new SD card in the radio with the original SD card and its old version (2.7) and started the radio. The radio tells me it now has the 2.8 update and all of the screens look like your video screens and the radio seems to be functioning normally. I am not convinced that all is well with my radio...it may be horribly messed up...time will tell. I have a submitted my original problem to the folks at Radiomaster and will see what they say. Thanks again, David
Do you have a video to cover: if I think I really messed up and don't have an original back up from when your transmitter was brand new and just want to create a new sd card like it came from the factory? I know radiomaster website has a file that you can download. 😕 "Asking for a friend." "Completely hypothetical" of course.
Outside of firmware, all configuration date is held in \RADIO adio.yml and \MODELS\modelxx.yyy So basically, if you erase everything in those two directories you're almost there. If you want a full reset, buddy.edgetx.org is probably the best bet. Just erase your sd card contents and install from buddy.
Alrighty... did everything that I could and so far I thought all was ok... however for some reason my radio is dropping signal with my Betafpv 1w module when I engage my throttle. Any thoughts?
@@RCVideoReviews I will give that one a shot. I have the old hm one that I updated. Thanks. It could be user error but not sure. Ended up picking up the T20 at a decent price to get me through until I can get myTX16s up again.
@@RCVideoReviews Brother... you are an absolute life saver!!!! It turns out there may be an issue with my original BetaFPV 1w module as I updated my original Happy Model one that I got when they first came out and it works perfectly!!!! Thanks again for the help!!!!
You can't recover personal info like model settings, but you can easy setup the radio from complete scratch as outlined in this video: th-cam.com/video/0WnpfE78-KU/w-d-xo.html If you're already on Edge, just follow the steps shown to obtain the SD card data.
Thanks for all your content. I’ve got an Emergency mode after going from OTX to ETX. It came in the first boot after pressing for too long enter button. Then never had it after that. Should I be worried ?
If you can repeat the error, you should report it to the EdgeTX team on the Github issue tracker: github.com/EdgeTX/edgetx/issues Otherwise, it's hard to say what caused it. Maybe an olde widget or lua on the radio...can't say.
@@RCVideoReviews so i bought it 2 weeks ago , and i see that because i am using version 2.8 of edgetx i am a bit lost , but with the videos posted on youtube they will help me a lot
@rcvr: John, thanks for the video and all your great content making us familiar with edgetx. I ran 2 times into emergency mode when copying SD card content (e.g. sounds) from my pc to the tx16s. Any idea on that? (Highly appreciated)
I don't know how you flashed, but watch this video. The radio doesn't get a vote on whether it runs the firmware you actually flash: th-cam.com/video/LItyAkJlcdU/w-d-xo.html
@RC Video Reviews yeah tried that radio wont read any other card but the one was in it and other card readers wont even see the RadioMaster card. I already talked to RadioMaster they gonna refund the loot. Was not a problem. Got another one one the way. I subed ya gonna need help Tuesday lol
LOL, I actually recorded a track, "I'm old and confused, I don't know what to do" I almost used it too, because I'm old, and sometimes confused--but I usually know what to do.
The disaster is like when loading the firmware, the radio turns off and that's it. There is a black screen no response. I've had that several times. Sorry for the language.
Odd that I've probably flashed every EdgeTX radio out there: Radiomaster, Jumper, FlySky and I've never had my screen go dark. Some of these radios have been flashed as a development box which means as many as 20 times a day for a week. Something must have really gone wrong in your case.
So with all that computer knowledge to a layman??? There is still no button for an original FACTORY SETTING RESET? That little 6 channel radio HobbyKing was selling has a FACTORT RESET BUTTON?Couple of times i messed up and used it it is some little radio for a laman, i purchased another one for my grandson and seam to cannot get hojd of the trainer cable to connect them together because of all this stuppid political bullshit going on.
No factory reset button on these radios. EdgeTX resides on SD card, so if you want to reset it, remove the MODELS and RADIO directories from the SD card.
1 year later and this video just saved me. SD card failed so I needed to replace mine. I FUBAR'd the process and was able to properly recover it becuase of this video. Thank you
Thank you, this video is a lifesaver! I purchased a new OMP M2 EVO and Radiomaster TX16s at the same time, the new TX16s come with EdgeTX preinstalled an configured for the OMP internal Rx. Instead of just flying out of the box as-is and enjoying it, I thought I'd upgrade to 2.8.0 before ever using it. Big mistake... I didn't realize that I couldn't follow along with my Mac using the cable, it won't overwrite files that it says are 'busy', so I skipped them. The result was an upgraded operating system with incorrect control outputs. Go out and buy a MicroSD card reader and re-format the OEM card (or buy a new one) then follow the instructions in this video. It worked like a champ, all is well (back to stock). I'm leery now to upgrade to 2.8.0, since there are not many UT videos showing how to program the new M2 EVO with internal OMP protocol on the latest EdgeTX OS.
Glad you're back in business.
If it wasn’t for RCVR and John I’d probably still be on the version of openTx that my radio came with, he makes it simple to follow and explains everything down to a T, thanks once again for such a great channel John and all the amazing content, RCVR for the Win!!! 👍🛸🏆🥇
Thank you! Very nice comment.
Me too!
I wouldn't even know how to power it on
And if it met your needs and did everything you needed, what would it natter if it has the latest firmware on it. Personally, i go by the if it aint broke dont fix it mentality
@@RCVideoReviewswhen I plug in my USB plug into the radio it does not give me a prompt “USB STORAGE” instead it just says”USB” and is not recognized by companion or flasher. Not sure what to do so I can upgrade firmware. Help please
Ditto on the SD card recovery - clock battery replacement and somehow the sd card got corrupted - fortunately only some system files - so all models still on it - copied to disk and restored back. Thanks so much!
When I upgraded to 2.7.1 I somehow screwed up the max volume - or so I thought. With the volume set to max, I could barely hear the radio. I was at a loss until it occurred to me to recopy the voice pak. That worked. Evidently, some voice packs are louder than others, and somehow I got a quiet one. You've probably mentioned this phenomena in one of your many, many videos, but if so, I missed (or forgot) it. Thought I'd mention it here in case someone else does the same thing I did. Now I'm on 2.8 and all is well. Thanks to all your videos, I no longer have to sit in front of TH-cam for hours before I touch my radio!
The stock sound pack from Radiomaster was sampled wrong (it had deadspace too). I actually found that, told RM and Edge. I think they've fixed it by now.
Thank you John! You have the best content for Open TX/Edge TX. You helped me get my radio back to previous version! I was entertained in the process😆 Thank you for all the great content 👍
Glad to help.
Thanks for the video. Just got myself a Radiomaster TX16s mk2. Your videos encourage me to play more with it.
It’s a great radio. Don’t be afraid to jump in and tinker with it.
Plain and simple John. It isn't hard at all if you just follow your snippet. Keep up the good work.
Right on. Easy to get back to where you started with a good backup.
Edge is the made for programmers and not for pilots who want to fly more than screw around with complex settings and programming. I converted back to openTX on my Tx16s and am sooo glad I did.
Just not a true statement. You can setup a brand new model on EdgeTX in three clicks: th-cam.com/video/uSWH7f3_g6I/w-d-xo.html
How much you ADD to that configuration is up to you.
The core functionality of EdgeTX and OpenTX is nearly identical with EdgeTX refining and updating core elements of the firmware and adding modern functionality that doesn't exist in OpenTX such as making it touch friendly. But--your money your hobby. Have at it.
Great video with great instructions for those that run into this issue. I know it will help a lot of people.
Thanks Dave :)
I'll give you an 8 for acting in the distress scene. Maybe a 7. On the educational side of things, your content is a solid 10, though. Thanks!
90% is an A. I'll take it. :)
I made a boo-boo and deleted two channels by mistake. The channels were empty so no big deal. But how can I get these channels back. Thanks for all you do for us RC maniacs. Jeff.
I am having the same problem only left with models , radio , luar happened automatically maybe low quality sd card since it happened without I did anything so there is no backup with me so what should I do now ??
Hi John, thanks a lot for your tutorial series and all the efforts you've been putting in. I am all new to open radio software (EdgeTX + Radiomaster TX16s MkII) coming from Spektrum. I already updated my radio once to Providence and everything went well. Now, I just wanted to update to the new firmware version 2.10.0 (Centurion) and it happens that the radio does not want to turn on to bootloader mode at all. All my attempts (T4 +T1 inwards + power on) remained unsuccessful and the radio would simply turn on and launch Edge TX in the normal course. Do you by any chance know how to fix this, and could you help me ?
What happens if you dont get that initial prompt for USB? I used to work, I updated to the latest firmware, now that prompt doesnt show up. :(
Your content is gold :). Cheers!!
Thank you, I appreciate it.
ok, made some progress. My radio is back to factory. But... USB still not connecting, :( I do get the pop up the select Joystick. Also, when I go in to Bootloader mode and then plug in USB to top of controller, I dont get the drives listed in Windows Explorer. Any ideas?
Hi ,I've a major problem with my tx 16s
I have loads of images in my image folder, all good.
BUT when I want to load an image on the model setup page it just shows me four models and that's it???
Can't load any other models from the image folder!!!!
I have deleted all the folders and reinstalled them, But it's still the same!!!!.
Any ideas Thanks.
Keep them coming .
Whats turn to bitmap for???
That looks like exactly what I would do is screw my whole radio up As I said in a previous comment I'm not good with computers at all I may have my brother trying to help me update 2 edge 2.8 But of course do a backup 1st Thanks for all your great videos John
Glad to help Matt. Good luck.
thank you - thank you - thank you - thank you.
You are very welcome
can't extract radio/radio.bin I get this message when I try and Read models and settings from radio on the Open TX Companion software on my PC. Somewhere I goofed on the SD Card or setup of the Companion software. Any help would be appreciated.
Answered in another comment.
When I upgraded to edgetx I lost the helicopter settings menu. Any idea what I did wrong? Is it not included with edgetx?
They took it out as a standard option for 2.8 as so few use it. You can join their discord and they'll make you a version with the heli tab. I think eventually they want that to be a tab that can be turned on and off by a user. It's not "gone" per se, they just turned the tab off by default in 2.8.
Hello, please I have problemes to acces to system botten or mdl I like it dos't work ...I dont know if it is Matreial defectuse or sovtwere..
Sounds like it could be a hardware problem. I'd suggest connecting with Radiomaster for help.
Very helpful video. Thank you!
You're welcome!
The beauty of the tx16s is the card where all the data and the OS live. Even if I destroy my TX, I still have my data. Why? backups...
Yep--definitely a bonus to have those backups.
Beyond Catastrophic failure. Hope you can help. Tx16s opentx backed up, attempted updating wasn't successful. Loaded from backup but there was no sticks showing on lcd screen. Guessed at which Firmware to load from Radiomasters site . No luck. And downhill from there. Turn on and warning NO SD CARD INSTALLED ; the card is installed properly. Anywho corrupt sd card etc.
Can it be salvaged?
By the by, I have learned much from your videos, thank you for all the hard work.
You need to get on discord and ask there. WAY WAY too much to unpack in YT comments.
if you have only 1 model in your radio but in your SD card it shows like 7. ( happens often after sd card error and emergency mode)
then add model2, model3text etc in opentx manually and you have all your old models back and your radio acts normal again
this happend to me a couple of times.
you start your radio and it seems things are missing, like your models but they are still there but somehow a folder gets stuck on having just model1 even after adding more models
so if you find that folder in opentx and add the model names manually, it wil revert back the error and the models are visible again in your radio by adding those model names manually
sound crazy but i have this happen a couple times after a sd error and emergency mode
Hi John hope your OK. Just one question which is bugging me ever since I've updated the lua script on expresslrs it no longer appears on the tools page when going into tools and have to go into the sd card content to access it
If you put it in \SCRIPTS\TOOLS it should show up in the tools menu. Mine does.
@@RCVideoReviews I thought I had, but will have another look tomorrow. Thanks
Strange. I've just downloaded another copy of the lua script, and to the best of my knowledge, nothing has been altered, and it works!. There must be a god, after all. Thank you again, and go easy with the turkey at Christmas 🎄
Wahoo. Early Christmas.
Hi, I'm in this predicament, and worst I didn't back up my SD card. What is worse than that is the dog chewed up the SD card. Now I have nothing. Had to get a new SD card. What do I do to get EdgeTX back on my TX16s with a new SD card? Thanx
Everything you need to replace your EdgeTX SD Card contents is on the EdgeTX Github and the MPM Download page.
Great how to video but it does not work for me... I am using a Mac and have downloaded/set up companion software on my computer. When I connect computer to radio, the screen on the transmitter has an image of a USB with "USB" filling the entire screen. Nothing opens on my computer and nothing further happens on the transmitter.
When I open the companion program and select "read/write" for the radio (with it connected to computer after turning on the radio in boot mode and then connecting it to my computer) I get a message telling me the program is unable to read the SD card.
Can you help me understand what is going on?
Thanks in advance!
Is the radio prompting you for SD Storage, Joystick or Serial? If not, make sure in System settings the radio is set to Ask. Try a different cable, different port, reboot, try a different computer if available. Once you have a known working hardware config with the radio and cable, your Mac should work.
Outside of that, you'll need to get some local help. Unfortunately, I can't get involved in troubleshooting individual USB connectivity issues.
Good luck.
@@RCVideoReviews Thank you for your reply. Yes, I was presented with the 3 options and choose SD Storage. Since this did not open any folders on my computer (per your video), I opted to use the companion software (2.3.15 version) to back up my SD card. When trying this method, I kept receiving the "Cannot find the SD Card" message.
Using an SD card reader, I copied the radio's original SD card contents to my hard drive. I then inserted a new SD card into the reader, copied the data from the hard drive to it and then followed your 2.8 update video to update the new card. I placed the new card into the radio and followed your instructions with updating the radio's firmware. After exiting that window, I was presented with a "SD card not functioning" message. I replaced the new SD card in the radio with the original SD card and its old version (2.7) and started the radio.
The radio tells me it now has the 2.8 update and all of the screens look like your video screens and the radio seems to be functioning normally.
I am not convinced that all is well with my radio...it may be horribly messed up...time will tell.
I have a submitted my original problem to the folks at Radiomaster and will see what they say.
Thanks again, David
Do you have a video to cover: if I think I really messed up and don't have an original back up from when your transmitter was brand new and just want to create a new sd card like it came from the factory? I know radiomaster website has a file that you can download. 😕 "Asking for a friend." "Completely hypothetical" of course.
Outside of firmware, all configuration date is held in \RADIO
adio.yml and \MODELS\modelxx.yyy
So basically, if you erase everything in those two directories you're almost there. If you want a full reset, buddy.edgetx.org is probably the best bet. Just erase your sd card contents and install from buddy.
Alrighty... did everything that I could and so far I thought all was ok... however for some reason my radio is dropping signal with my Betafpv 1w module when I engage my throttle. Any thoughts?
I don't know what to say about this one. Do you have any other modules with which to test?
@@RCVideoReviews I will give that one a shot. I have the old hm one that I updated. Thanks.
It could be user error but not sure. Ended up picking up the T20 at a decent price to get me through until I can get myTX16s up again.
@@RCVideoReviews Brother... you are an absolute life saver!!!! It turns out there may be an issue with my original BetaFPV 1w module as I updated my original Happy Model one that I got when they first came out and it works perfectly!!!! Thanks again for the help!!!!
In my best Elvis voice: "Thank you, thank you very much... I'm here all week....tell your friends" :)
@@RCVideoReviews 😂😂😂
This is good content ,is there a recovery method if you have no backup of the radio ??
You can't recover personal info like model settings, but you can easy setup the radio from complete scratch as outlined in this video: th-cam.com/video/0WnpfE78-KU/w-d-xo.html If you're already on Edge, just follow the steps shown to obtain the SD card data.
Thanks for all your content.
I’ve got an Emergency mode after going from OTX to ETX. It came in the first boot after pressing for too long enter button. Then never had it after that.
Should I be worried ?
If you can repeat the error, you should report it to the EdgeTX team on the Github issue tracker: github.com/EdgeTX/edgetx/issues
Otherwise, it's hard to say what caused it. Maybe an olde widget or lua on the radio...can't say.
@@RCVideoReviews No way to reproduce it fortunately.
And thanks for the 2.8 live and video. That’s what convinced me to upgrade to ETX.
You're very welcome.
Thank you very much for the video, calmly I will watch other videos, I have similar situations on my radionaster tx16s carbon

You're welcome.
@@RCVideoReviews so i bought it 2 weeks ago , and i see that because i am using version 2.8 of edgetx i am a bit lost , but with the videos posted on youtube they will help me a lot
@rcvr: John, thanks for the video and all your great content making us familiar with edgetx.
I ran 2 times into emergency mode when copying SD card content (e.g. sounds) from my pc to the tx16s. Any idea on that? (Highly appreciated)
No idea. Can you repeat it? If so, please open an issue on the EdgeTX Github: github.com/EdgeTX/edgetx/issues/new/choose
Don't see a link in the description
what do i do, if i don't have a backup?
This video covers a complete build from the ground up: th-cam.com/video/0WnpfE78-KU/w-d-xo.html
Yes! ❤
Definitely the site to go to👏👍
Thank you :)
It costs EdgeTX 2.7.1, I decided to install 2.8.0, the hardware tx16s shows the firmware process, but there is no update.
I don't know how you flashed, but watch this video. The radio doesn't get a vote on whether it runs the firmware you actually flash: th-cam.com/video/LItyAkJlcdU/w-d-xo.html
Yeah what if you dont have a back up and the usb port wont see the card
You can take the SD card out of the radio and use a traditional card reader to read/write to the sd card.
@RC Video Reviews yeah tried that radio wont read any other card but the one was in it and other card readers wont even see the RadioMaster card. I already talked to RadioMaster they gonna refund the loot. Was not a problem. Got another one one the way. I subed ya gonna need help Tuesday lol
what if i dont have a back up?? help
th-cam.com/users/livezvakNqu_5Ec
I basically did this to my erls boxer radio... help
I have a backup sd in the battery bay, i am a prepper.
Nice.
i.m so scared ! so scared to update anything electronic . I AM OLD AND I AM SCARED ! 🥺
LOL, I actually recorded a track, "I'm old and confused, I don't know what to do" I almost used it too, because I'm old, and sometimes confused--but I usually know what to do.
The disaster is like when loading the firmware, the radio turns off and that's it. There is a black screen no response. I've had that several times.
Sorry for the language.
Odd that I've probably flashed every EdgeTX radio out there: Radiomaster, Jumper, FlySky and I've never had my screen go dark. Some of these radios have been flashed as a development box which means as many as 20 times a day for a week.
Something must have really gone wrong in your case.
No bong
So basically just 'make sure you back up'. Not really much use to anyone who thought this was a way to recover a bricked radio.
In case of Brick, perhaps search for Brick: th-cam.com/video/H9_sxXY_K-8/w-d-xo.html
So with all that computer knowledge to a layman??? There is still no button for an original FACTORY SETTING RESET? That little 6 channel radio HobbyKing was selling has a FACTORT RESET BUTTON?Couple of times i messed up and used it it is some little radio for a laman, i purchased another one for my grandson and seam to cannot get hojd of the trainer cable to connect them together because of all this stuppid political bullshit going on.
No factory reset button on these radios. EdgeTX resides on SD card, so if you want to reset it, remove the MODELS and RADIO directories from the SD card.
And if I roll back to version 2.7.1, will the old version work with the new version of the multiprotocol module?
Thanks
Yes. You can also download prior MPM firmware if you question it.
@@RCVideoReviews Thanks!
When I rolled back to 2.7.1 I left the newer file on and it's working fine.
Hi John. Please contact me. Regarding patreon failures.
You can e-mail me: john at rcvideoreviews [dot] com