Radiomaster TX16s Setup • Complete Start to Finish Tutorial • [Beginners]
ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- Radiomaster TX16s Setup - How to setup your new TX16s from rcvideoreviews... is a COMPLETE setup guide for the Radiomaster TX16s. In this video, I review system options of the radio including demonstrations of what the options do. I cover usage of the LUA tools menu, managing the tools displayed on that menu, SD Card navigation, hardware calibration, and much more.
If you want a detailed review of the system setup options of this radio, you've found the right video.
Here is the @UAV Tech video I referenced describing the ADC option in detail:
• OpenTX ADC Filter: Dis...
Join me on Patreon: / rcvideoreviews
Please use my affiliate links for Amazon and Banggood. Anything you buy using my links will generate a small commission for the channel:
Amazon: amzn.to/3lEz5ZL
Banggood: www.banggood.c...
T-Shirts: teespring.com/...
RCVR Amazon Basics List
Solder Station Heavy Duty Helping Hands: amzn.to/32WInJN
ToolkitRC WM150 Watt Meter amzn.to/2A13Ogu
Generic Watt Meter amzn.to/377epmg
10 Pack XT60 Connectors with shrink tube: amzn.to/2zVBWdB
50 Pack 3.5mm Bullet Connectors: amzn.to/3dw8pot
10 Pack 300mm Servo Extensions: amzn.to/3dVBRoi
Heat Shrink Tubing: amzn.to/3ezjIxB
ZTW 10a peak/6a cont BEC 6v/5.5v/5v: amzn.to/2ZdAA6S
ZTW 40a ESC with XT60 Installed: amzn.to/3fPu2ll
ZTW 60a ESC with XT60 Installed: amzn.to/2CqrNGH
ZTW 80a ESC with XT60 Installed: amzn.to/2ZLIUuS
ZTW Programming Card: amzn.to/2BuHZqb
MG90s 9g Servo 5 Pack: amzn.to/315Kmuh
ISDT LiPo Balance Checker: amzn.to/2Z0HOee
Generic LiPo Balance Checker: amzn.to/3drCO7B
FrSky S6R Rx with Stabilizer: amzn.to/320IrHU
![Radiomaster TX16s • How-to setup an RC Plane with OpenTx Plane Setup Wizard • [Beginners]](http://i.ytimg.com/vi/kHi47f3rO80/mqdefault.jpg)
![Radiomaster TX16s • How-to setup an RC Plane with OpenTx Plane Setup Wizard • [Beginners]](/img/tr.png)
This is the most thorough setup tutorial I've ever seen, thanks so much again, especially for an old newbie like i am, my best regards from Alan in the UK 😊😊👍👍
Thanks for taking the time to comment. I’m glad you found it helpful.
Best,
J
@@RCVideoReviews can u charge the controller with the usb cable provided . or what charge cable do i need to charge through the controller . thanks buddy . love your vids
@@r.ccustomtruckingsydneyaus4632 You can charge the radio with the included USB-C. I've charged it from just about any USB charger I have laying around including Apple, Desktop, and a Laptop USB-C AC power supply. They all work.
Looks like I'm following in your footsteps Alan 👍
I just bought one of these radio and am a total noob so I was thinking I maybe bit off more then I could chew but these videos have basically changed that. Thank you so much !!
Very awesome to hear that. I'm glad they're helping you rein the radio in. It can be a little much at first, but once the light starts to go on, you'll find out you can do just about anything.
Thanks for watching and the nice comment.
J
Excellent beginners setup tutorial John. I’m a total newbie with this radio and OpenTX, but your teaching style work well for me.
Thanks for taking the time to share your experience with this radio and software! Jim
You're welcome. This isn't exactly exhilarating content but I know if I read something and say, "I wonder what that means" I can't be the only one.
Thanks for the comment,
J
Great video and series. Very complete and well articulated. Anyone that thinks they didn’t learn anything is in denial.
Thank you George! Appreciate the comment and glad you found the video useful.
I'm already a subscriber to the channel but still I want to say it again: you're probably the most beginner-friendly rc guy on TH-cam. Great video! I can always learn something by watching your reviews/tutorials. Thank you👍
Glad to hear it. Thanks for taking the time to write.
This entire series is fantastic! Clear, organized information and excellent video work. Videos are logically broken down for easier consumption. For me as an old Heathkit/Futaba/HiTec/Spektrum guy I got into drones and this radio is so perfect! Lots to learn but with these videos, I am learning fast - I will be putting all of my planes (and drones) on this platform thanks to the lessons learned here. Thank you for this great work!!
Wow, thanks! Glad you've found the material useful. Thank you.
Very clearly produced. Clear voice, good pace and clear videography. Definitely subbed as I received my TX16X Blue Max today..
Welcome to the channel. Thanks for the kind comment.
WOW just subscribed. Not new to RC but thought it was time to make upgrade. I’ve been using flysky Tx & Rx they worked great and very simple and easy to use. I like the radiomaster because I can use my existing Rx’s. I wanted a couple extra channels and features but this thing will do every thing except land the plane (unless that’s in another tutorial 😊). I’m waiting for delivery of the radio so I wanted to get jump on figuring it out. I will check out all your videos. Excellent presentatiov
This is actually more of OpenTx tutor than Radio type tutorial. Still great.
All a radio is Sticks...Gimbles.. open tx and Crossfire betaflight run the show... lol love Hobby
Just bought mine and it arrived today so I'll be having a good look through your videos to learn everything :)
Have fun. It’s a solid radio.
Hey Man, where were you when I first struggled to learn OpenTX on my Horus a couple of years ago?! Your voice and detailed, thorough and easy-to-understand explanation reminds me of the late great JC of Project Blue Falcon. He was the best. Please keep doing what you're doing because it's needed.
I actually did a number of OpenTx videos a couple of years ago but they never got any traction. This second round took though, so I built a good sized library and have move on the way. Appreciate the comment and welcome to the channel.
I think this radio will be a perfect upgrade from my QX7
I used to think my DX8 was quite advanced, now I see this, it seems like it's from back in the stone-ages!
OpenTx is a very capable platform. I still learn new things on a regular basis.
A big thanks for this great video. it helped me so much. and all the other video you made. i just got my TX16S and i was a little lost. i am new in the hobby and i needed your videos
Glad I could help!
I was considering buying this and after watching this video I'm definitely getting this I love how user friendly and awesome this radio is thank you sir
You're welcome. Enjoy.
Thank you so much for this! This is like a full-on course/class on this. As a complete noob, I'm super intimidated by this hobby but really want to get in. I have no idea what I'm doing and no previous experience in anything even remotely (no pun intended) related to anything radio or FPV related. I'm following along very intently trying to keep up even though I don't understand any of the numbers, settings, frequencies, charts, words, terms, or what any of the jargon means but I'm super excited to do this and you're making it accessible for me by even having this! Even though I'm still early and confused I have no idea how anyone would navigate this without a video like this. Since I am hesitantly investing the limited money I have into this hobby I very much appreciate you putting this up!
You're very welcome. I have a pretty large library of OpenTx material, so just take your time and have fun with it. Don't be afraid to play with different settings on the radio. You can't hurt anything until you actually start to fly.
@@RCVideoReviews Awesome, I just subscribed and liked! Been watching videos and messing with it since I got it. Right now I've been stuck trying to find out why when calibrating the elevator won't go down under center when I bring the right stick down and it snaps to the top when I push it up. The ele only moves invertedly when I move the left throttle stick up and down and it never goes down past the center when I pull the right stick down. When the throttle is down at idle and right stick at the center the channels read like this:
02 Ele 46%
03 -100%
and if I pull the left stick down it stays at 46% and when the throttle is at 0% the elevator stays at 0% and never goes under, it only snaps up to 66-100%
or is none of this even a problem and that is exactly how it's supposed to work?
@@Obi1kanObi Are you sure you have mode 2 set on the bottom of the system page?
Fantastic series of tutorials! Thank you for doing them.
You're very welcome!
This is a very thorough review of the Radiomaster. I found it most informative. Subscribed.
Greetings from Florida.
Thank you
Welcome aboard!
Great video! I just got my Radiomaster yesterday and am now waiting on the battery that'll go in it. In the meantime, I'm watching as many tutorial videos as I can find. This is one of the best. Thanks for posting!
Thanks for the kind comment. Glad it's been helpful for you.
Video extremely informative. Will be saving in library when my radio comes in.😁
Glad it was helpful! In case you didn't know, I've added these tutorial videos to playlists organized by skill level:
Beginners th-cam.com/play/PLy3TC1ILJYTjqDXFB84oXVWZG14zyMYYt.html
Intermediate/Advanced: th-cam.com/play/PLy3TC1ILJYThzwReZComrM-LFTa2wfiUW.html
Hope that helps...
Had little problem following thou there were a few screens slightly different maybe because I have no planes yet. Wonderful video
Perfect instruction in details. love that as a newbie. Thanks. Subscribed and liked.
Amir from Sydney.
Thanks and welcome. Glad it helped.
Thank you! I just got a TX16s MAX and I found this tutorial very useful. Loved the bloopers at the end as well ;). You got a new subscriber!
Thanks for the sub and welcome to the channel.
Such a good controller
Agreed.
Thanks so much ! Now I need to watch all of your stuff. Subscribed.
Awesome, thank you! You’ll be able to binge watch for a while ;)
Thanks for a nice clear walkthrough 👍
No problem 👍
Thank you for the comprehensive manual
You're welcome.
what a great vid!! the temp is good , clear talk, good soun, good explaining, good visuals.. subscribed!! thx
Thanks for the sub!
Finally someone who is explaning everything !!!! thxxxxxxxxxxxxx
You're welcome! Glad the video is helpful for you.
J
BLOOPERS!!!! The world loves bloopers... HAHAHA!! Thanks for sharing, great teaching video, Thanks a ton!!
Glad you enjoyed it!
Great tutorials, thank you. subscribed
Awesome, thank you!
Most awesome rundown on the setup features of this great radio!! Thank you very much as I just ordered one today. I subbed as well. 👍👍😊
Welcome aboard!
I have all of the tutorial videos organized into playlists to make them easy to find:
Beginner Topics
th-cam.com/play/PLy3TC1ILJYTjqDXFB84oXVWZG14zyMYYt.html
Intermediate and Advanced Topics
th-cam.com/play/PLy3TC1ILJYThzwReZComrM-LFTa2wfiUW.html
Have fun with your TX16s, it's a really good radio.
Definitely love the stuffups at the end, very funny.
It's comical sometimes how the mind knows what to say but the mouth disagrees. Glad you enjoy them.
Loved this video for future reference, but I'm stuck after working with Velocidrone and RadioMaster TX16S support staff trying to get them talking to each other and just have the transmitter act as a joystick controller for the Velocidrone SIM. We have failed after a week of trying this and that and the time it takes for them to respond to me and me to them is killing us as far as efficiency. Other words, we wasting a ton of time on a simple thing. I felt like someone else had to have experienced this same issue so I've found TH-cam to be a valuable resource at times. I thought I nail it when I saw your video. But it never discussed using the transmitter as a joystick other than how to put it in Joystick Mode. We can of knew that one. I was wondering if you could make or direct me to a video you've already made on just the basics of how to unbox it, how to connect it to your Windows 10 or higher PC and including maybe one of the most popular simulators made by Velocidrone out there that most racing pilots are using to practice and get started with. I was told I may need 100 hours of SIM time before I should go buy a real drone. True or Not? Don't know. But I just can't seemed to get started. I feel like we all are missing something very simple and just have not figured out what yet.... Please help or send me to someone who can? And I am willing to pay for consultation.....up to a point... LOL
I have followed and subscribed to the channel, to learn how to use the Radiomaster TX16S and it is effectively the most
enlightening that I found.
Congratulations to the channel and keep it up.
I bought a radio like this, although I haven't received it yet (Black friday), but one question I wanted to clarify is the following:
On Radio Setup the Default channel order that is in AETR, if you change to any other such as TAER, everything will be fine
or there will be a problem, as it says in the manual : "Because the channel input order of the built-in multi-protocol transmitting
module of the RadioMaster TX16S remote control is AETR, in the Default channel
order option, be sure to select the AETR order '"
Therefore, I don't see the interest in having more options besides the ATER option if there may be any problems in the future
Thank you and my best regards from Portugal.
Glad to have you. Thanks for joining.
Thanks again; why I messed my controller up shorted the main board when charging some how and ordered and replaced it. Then I went to set everything up and the sdcard was corrupted. Ok now all is good so I just started swallowed my pride and started over again including backing up all my data on this TX16s. Always leaning something. Thanks again.
Glad to help. Hopefully your issues are in the rearview mirror now.
Love you bro you are still making vids, one day you will become a successful youtuber
Brilliant ! Glad I found your channel - Subscribed 🇨🇦👍
I'm glad you found it too! Welcome to the channel.
Thank you so much for this video. Great help and well done.
You're very welcome! Thanks for watching and commenting.
Hey man, new RC Flyer here and love you videos.
Glad you like them. Make sure to subscribe and hit the notification bell so you know when new videos land. Welcome to the channel!
OK, very helpful, Super, Thanks!
You're welcome!
Thanks for an excellent tutorial it really helps. Clear an concise explanations I look forward to watching the videos in the series.
Seasons greetings from Yorkshire England.
You're very welcome! Happy New Year. Thanks for watching.
Excellent content. You do a great job explaining everything. Subbed! 👍
Thanks and welcome to the channel.
Great tutorial, very helpful, Thanks!
You're welcome!
Thanks learned a few things myself. Good job👍👍👊👊
Glad to hear it! Thanks for commenting and watching.
Dude , you're good at teaching! Thank you so much!
I appreciate that! Thanks for watching.
Nice work mate. Watched the lot! Great help. 👊🍻👍🌟🏅
Well...now you know all [almost] my secrets.
Glad they helped.
J
More super-helpful content from RC Video Reviews!
Glad you think so!
thank you so much for demonstrating and explaining. At least I'm able to configure my Jumper T18 which is very similar.
You're welcome. All of the OpenTx videos I have using the TX16s as the demo unit will also apply to the Jumper T18. From a software standpoint, these two radios are identical.
Thanks! I got mine today and this is just helpful
Very glad to help.
it's 2am, I think it's time I stop watching tutorials on how to use OpenTX 😂
I've been using these radios for about 7 years now and I still learn new things on a regular basis. Enjoy the journey.
Great tutorial, love your calmness and voice. Radiomaster ordered and you got a new subscriber.
Welcome to the channel Thanks for watching and I hope you enjoy your new radio.
You're right, subscribed :D
Welcome aboard!
Very good video!
Thank you very much!
Thanks!
You're welcome and thank you for hitting the tip jar! Appreciate it.
I just brought the radiomaster tx16s I have a cinewhoop coming in tomorrow trying to learn how to set it up for the first time with the radiomaster t16 s
You should check into our discord: discord.gg/jSFTASU Plenty of people there who can help if you need it.
Thank you
FREAKIN EXCELLENT !
Thank you.
Strange that GregE and TxFlyer both reported, in their posts below, the same issue as I experienced with SB when carrying out the Switch Test . A reboot cured the problem.
Great video! Very informative.
Thank you!
Excellent tutorial. SUBBED.
Welcome!
Hi! Very good Information on the radio. This is Robert Wioch. I will give you always a Thumps up. you are the best out there. AAAAAAAAAA++++++++++ :))
Wow, thanks
And again i loved it .bit outdated now but still kinda works great .now i feel like i have a new radio again .Thank you! oh i know you dont do drones .you might but i never seen you with one. any chance you could do a full setup for a fpv drone or a friend to do one or send me to a url/youtrube site so i can watch, as im always messin things up im ok building just the radio in depth . as i have short term memory and rely on these videos a lot ,if not its ok i will work it out somehow :) thanx i have the tx16s with happymodel ES24TX pro adapter on the back :) and hdzero goggles with analog and um walksnail adapter so im kinda good with anytrhing not DJI.. i realy appreceate your work and anyones that helps you as i would not be doing this without you and a few others (your definatly my radio Man) finally got rid of then scripts i never used woohoo
Thanks for help 👍👌🙏
Happy to help. Thanks for watching and commenting.
That play delay feature is a basic SW debounce on an input. It's very common to implement on any input of a processor, especially mechanical switches as these litterally bounce a couple of times upon switching. To us humans it's indetectible, but these electronics pick them up very easily, as they can scan them a couple of hundred thousand times a second, or even millions of times a second.
Need help on flysky i10 -fsi10 radio control, can you help me how to setup my frist time
Thanks a lot.
You’re welcome.
The touch screen? Hmmm ive had to use mine on the nirvana and what a pain in the arse! Thank god we will have the choice off touch and buttons with radio master, the nirvana really needed that.
The Edge team is aware of the NV14 issues and they're working on making it better, but I did agree. I tried touch on the NV14 and it was a challenge.
Thanks for the clear Tutorial. Is it possible to give another tutorial on how to setup two Radiomater TX16s to bin with one Receiver? Thank you again
I discuss it in this video briefly: th-cam.com/video/QaEbn9R6QGc/w-d-xo.html
As far as I know, there is only one way to do it:
1) Get the source code for the multi protocol module.
2) Edit the source code and key in your own global unique identifier.
3) Compile that source code and flash both radios with it.
Its all about the firmware. If you can afford Spektrum , then you should buy Spektrum, if not buy the Radiomaster. If you want the multi - modulation thing then go for Radiomaster as well. If a single well executed RF modulation is what you want then Spektrum is hard to beat.
That's ridiculous. I can afford Spektrum and if you GAVE me one I would put it in a blender and stick with my Radiomaster. EdgeTX on this hardware is an easy call over Spektrum.
what is enalbe max throw under internal rf mean? if i switch it on, throttle runs even though kill switch enabled? also is the RF protocol x2f? how do you exit range test?
After I bind a receiver, the radio does not chirp. Do you know how to fix this?
Wow. to the point. no clutter etc. im already so goddammed fustrated when Im doing this shit the last thing i need is to watch a video where some guy mumbles and studders his was through an incohierant rembling about something I dont need. you really have a polished product here. thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you thank you !
Well! Thanks for taking the time to write and I'm very glad to know this was on point for you.
J
@@RCVideoReviews next time Ill take the time to proofread. im using the tv remote keyboard lol
@@BikingVikingHH No worries. No grammar police here--all good.
"I'll Never Fly Gas..." LOLZ
Hi, there. Is it possible for me to remap the function of physical buttons around the screen?
I hate it that the "Previous page" and Next page" button sit on the left, under the "Return/back" button.
I want to map "Previous page" to the SYS button
Next Page to MDL
SYS to RTN
MDL to NEXT
TELEMETRY tp PREV
UNDO to TELEMETRY
This is a more logical placement for me. Please advice. Thanks, man (for your answer and also for all you have done).
I don't believe there is.
Hello, thanks the video i setup my radio as i watched the video. I am new to edgetx and just got a new RMTx16x Mkii with 2.7.1. I need to update the firmware so I will have options for R9M but i'm not sure where/how to do that. I opened Edgetx 2.7companion and setup my radio profiles and then in settings i 'checked' flexr9m and lua. then went to file>download but the download was greyed out (not active). Could you point me in the correct direction?
Oh man you did a great job or made best detail video .
I bought this radio , and a lot from this video.
Need you guide line .
In my radio , edge tx version installed ,
Pls tell me edge tx version is good or open tx version is good ??
Hope u give better way .
Thanks for watching. I've switched all of my radios to EdgeTX. Here is a playlist of EdgeTX videos: th-cam.com/play/PLy3TC1ILJYTi_r8rRrgLmpJ17WGEZ4lYo.html
@@RCVideoReviews thanks for guide line .
How to set Delta wing setting in this radio ?
How to find all store model list ?
Pls inform
Also which latest version of edge tx you are using ?
And what sort of trouble shooting I can face ,? Mean some basic problems
Can someone help me
I have a extra 300 bnf with spectrum ar631
When I bind to safe mode the asx3 and safe works when I bind without safe mode the as3x does not function even after I move throttle 25%
Also I am having problem with throttle I recreated the same model not working
When throttle stick all way down position the throttle is at full blast and when I move stick all way up no change
I tried the inverted that did not do anything
Not sure what causing this
Thanks
Nice job! I'm a 107 certified Drone pilot and just received my new Eachine's version of the TX16S. Wow, it's very confusing to me coming from a Jumper T8SG. The problem I'm having is transferring the models from the old Jumper T8SG as it's not indicated on the open TX companion 2.3....
I'm not familiar with that radio. Does it use OpenTx? Have you tried just flashing EdgeTX? Make sure you back up your data first.
Hi i just got this radio, and when callibrating and sliding the right slider all the way to the top on screen i only see it going a bit above half of the center, the left slider reaches the top. Do u know a fix and if its software or hardware? When sliding it smoothly goes from the bottom till lets say 54% without a dead zone so i think its a bug or setting, anyone got a clue? Tnx
at 20:23 after "Check RTC Voltage", my tx16s radio has Bluetooth option but not the "Serial port 2 (TTL)? only "Serial Port(TTL) " is there...why it's like that....
I don't know the answer to that. I just checked on my radio which now has 2.3.10 and I have both Serial port (TTL) and Serial port 2 (TTL).
@ 13:33 you state you can add a GPS to the unit, is this correct? With my Taranis I have a GPS on my receiver and it updated my clock on the transmitter. I have a few GPS and would love to be able to add one to this transmitter, maybe do follow me mode? I can find no other reference to GPS in the Radiomaster transmitter itself. Please clarify. Thank you.
I've never added GPS to opentx, so I can't speak intelligently about the options other than to point out the firmware shows support for it.
Hey bro, what do I do on calibration... when It ask me to center my stir, I put my thorrottle to the middle the curser on the receiver goes up a bit....it only centers if I put my throttle all the way down and that is messing ,e up in my simulator..can you help please.
This is the calibration process: th-cam.com/video/iqAHIckNasM/w-d-xo.html
hello, I got a problem with my radiomaster: I can't play right on simulators. the calibration on the radio is ok, but the simulator doesn't work properly. How can I solve this? Thanks a lot
If the OS sees the radio as a joystick and the calibration tool on the PC works, the problem isn't with the radio, it's with your sim.
Hello, thanks for the detailed review.
Do you thing dji controller (V1) is safer in term of flyaway as connection not pids.
For example, if the throttle not 0% does the quad start?
As a general question, is Crossfire safe as dji fpv RC? Thanks man
My radio has just gotten screwy when I press MDL I get the page set up normally accessed by pressing TELE on the left bottom I cannot get into model setup when I go to switches test and press either TELE or MDL they both acknowledge the signal any ideas thanks going nuts
Reboot first. If that doesn't work, flash your old firmware back and see it it does the same thing.
Hi John, just a quick question. Just recently updated to 2.8.1 and when turning the transmitter it went into "Storage Preparation". This seemed to go on forever, the SD Card was formatted to FAT32 and 4096 bytes. Am I missing something?
Sounds like your SD card was corrupted or formatted in a way the radio didn't understand. I've not seen that during any upgrade I've made.
BTW: 4096 is the correct allocation size.
OK John, I might try another SD card. Thanks again 👍
What battery are you using ? What should i take for the battery range if i use 2 battery 3,7v ?
Thanks
This old brain is trying to get my quad "Inductrux" into the 16s without any luck. I found a printout of the quad Horizon Hobby BLH8516 FPV pro manual. Every time a set it up something does not work. Each time is something else.... How do you see it being done? Thanks for any help. Continued success.I have it bound, armed, 1 flight mode. It still way far from where it should when properly setup in the radio. It flys, some control, no hover or change in flight modes. Looking forward to hearing from you and your instruction.
So nice walkthrough, but I am brand new to flying… have had old school rc cars of every type! How did you get crossfire configure on there? Ordered the Cinnabot 3.0 with crossfire and have the radio master crossfire module in route… trying to get things dialed in so I can be ready to fly, but I’m unsure where to start
I have followed you OK up until calibration, my left stick can only be centred when the sticks at its lowest point ie 6 o'clock when I push the stick to centre it shows 12 on the screen the only movement on the stick is from 9 to 3 & above. I have no lower movement below 9 to 3
Center it physically. Don’t worry about the image until after the calibration. If it doesn’t show centered after the calibration do it again.
Question: I just want to make sure, this transmitter can directly be linked to the receiver of spektrum, futaba,frsky, flysky and so on ? I mean, without any whatever addon devices, just this transmitter.
It would probably work with a FrSky radio running OpenTx. On the others, you'll have to test.
Hi just got my tx16s 4in1 having some trouble binding my spektrum recievers any tips on this
Thank you for your time
BW
Try putting the DSM protocol on AUTO.
I have a sail plane with spoilers. I am able to operate the spoilers by a 3-position switch. My rudder and elevators are operated
on my right hand stick. I'd like to operate the spoilers for yaw control on my left hand stick. My RX is set up with rudder in ch 1,
Elev. in ch 2, ESC in ch 3, left spoiler in ch 5, and right spoiler in ch 6. Thank you
You can use inputs to map any physical control you have to a label. From there, the label can be attached to any channel in the mixer. You should check out some of the videos I've done on Inputs and Mixes.
Hi RC, on TRAINER Tab I got a Slave text, not your screen. How to change that? Thank you
On your model setup tab you have "Slave/Jack" selected. Change it to Master/*.
Thanks for your great content! I am revisiting RC after many years as technology seems to have reached another level! One thing I wonder about is: Why to people tear out their batteries from the plane and check the voltage from their smart planes when this info is already available in the telemetry?
Not all planes have flight pack telemetry--most don't. Don't confuse flight pack voltage with voltage fed to the Rx which is usually available via A2 or A1. That is a reduced value--usually 5v from the BEC, but it is not an indicator of flight pack voltage.
@@RCVideoReviews Aha, well I just managed to get the smart telemetry from my Horizon Timber plane (by using DSMX instead of the DSM protocol) into my EdgeTX radio and see the individual cell voltages are there.
Perfect. You can do a lot when you know flight pack voltage. You should check this out: th-cam.com/video/Q5s7zB0NDCQ/w-d-xo.html
I uses this whenever my setup gives me flight pack voltage.
Low voltage alarm... I have mine set on 6.8 v for my 18650’s as well, but curious how low you could go before possible transmitter failure. Just trying to figure out how much room I have between alarm and failure. Thanks.
LION battery voltage falls off a cliff after 3.4v. IMHO you're taking a risk running below 6.8v on 2s LION especially if you have any power hungry devices like external modules or if you keep your screen on.
@@RCVideoReviews Then I think I'll set it to 7.0v!
You will definitely mitigate Tx transmission failure risks doing that.
Great explanation. I am a subscriber! I am a Newby to Rc model flying (and building) in New Zealand. I have bought a Microaces DH.2 model in the building phase. I have the Radiomaster TX16s and had the Spectrum micro-receiver package supplied. When I try to bind, the seperate servos work, but nothing I do will got the motor to work. Another identical micro-receiver gives the same result. I know the motor works, because I have attached it to another Spectrum micro-receiver (a larger version with servos integrated). I have contacted Microaces models for help. Other than sending me a new receiver, they were unable to provide an explanation. They have no experience with the Radiomaster TX16s. I'm unable to complete the model until I get this problem solved. I do have Spectrum based models already bound to this transmitter. The Champ, UMX Turbo Timber are two examples.
I would be grateful to you or any viewer that has encountered this issue and solved it, or just knows from experience, what I'm doing wrong. As a Newby, any explanation of corrective action, would necessarily need to be step by step basic. Hope you can help. I'm very keen to get my little indoor model flying.
Ok, if you have two different receivers that are bound and you know they're bound because the servos operate but neither of them operate the motor, your problem must like in your model setup somewhere. I would suggest learning to use your channel monitor. From the model screen press the MODEL button, then press it again. From there, operate your throttle. You should see both MIX and OUTPUT lines move. If they both move then you need to make sure your ESC is connected to the channel that is moving. It's highly unlikely you have a problem with the radio or the receiver.
@@RCVideoReviews So sorry about the very late reply. For some reason my email replies have been sent to an old email gmail address. I couldn't work out how I was emailing people using my standard email address and not getting replies. I had a second address as one of my 'security settings,' fail-safe, whatever and recently I have found replies to mail sent from my main address seem to be routed to my 'other' email address. Go figure! Thanks for the reply. The issue was fixed by another Club member.
Under my switch test mode my SB is not showing up and I just purchased the Radio Master TX16S, should I open it up or contact my selling? Thanks!
Contact your seller.
@@RCVideoReviews My TX16S is straight out of the box and the Switch Test shows up the same problem for SB. The arrow alongside SB does not move. I shall contact the Hobby Shop tomorrow at opening of business. How did you get on with reconciling your problem, TxFlyer Ken?
When you bind a BNF PLANE (Spektrum TAER receiver) and a Frsky AETR receiver to the same TX16S do you always have to change the channel order manually? Or will the receiver # number change if for you when you model select?
I don't really understand your question. What do you mean "change the channel order manually"? On the radio in the Mix tab?
When you bind the TAER receiver, are you using disable channel map or are you setting up the Mix lines to match TAER?
FrSky doesn't really use AETR as far as I know. They just use channel numbers. This whole naming convention thing isn't really relevant on OpenTx or any FrSky Rx that I know of. AETR is only used to save time when setting up a new model.
@@RCVideoReviews Ok I see. I meant, if I want to use my tx16s for a Horizon Hobby BNF plane that already comes with a spektrum receiver installed, I believe I will have to setup the transmitter to be TAER. However, if I want to use another brand receiver will I have to keep the TAER channel order as well? I understand TAER/AETR is irrelevant to most opentx applications since you can just plug in the servos/esc to whichever input channel you want, but how about the BNF planes (especially the UMX?) that come preinstalled? In other words, is AETR or TAER a global setting on the transmitter? Or is it specific to the receiver # or model selected and how that specific model was setup? (for example, model #1 TAER for a BNF UMX, model #2 AETR for a Flysky receiver in a homemade plane).
Will I have to change the AETR/TAER each time I want to fly a different plane with a different brand receiver that might have a different channel order?
with 2.3.10 update in hardware section I am getting option as "max bauds : 115200 / 400000" after "Check RTC voltage", wt is it for?
That specifies the serial port communication speeds for the UARTS on the bottom of the radio.
@@RCVideoReviews Ok...great!!