Thanks for all the info!! I just signed up for your Patreon. You have saved me tons of money by not screwing it all up without your help, haha. Thanks a lot man!!
You are the MAN !!! Finally, after all the misinformation about the TX16S floating around. You had the fix for the Internal Module I was having so much trouble with Express LRS loading ! - Thank YOU !! :-)))
This issue was driving me bonkers! Trying to bind to a Goosky S2 just wasn't working. Looked everywhere on the internet but to no avail. Then I found this video, and once again Mr Bardwell to the rescue. Thank you Sir.
Love your videos! Today I learned that my radio can decide by itself what internal module it has (or not) in the hardware menu... It changed by itself!
What a stuff around lol, good thing that you have put out this video for those people who have just updated their radio. I have the Zorro with internal 4 in 1 but haven’t updated it as yet, already flying 1 quad, and was going to update my tx16s to edge tx, and I wasn’t sure what I needed to do. I’m definitely keeping the tx16s as a backup and also for doing majorly long flights once I get a few more long range planes. Looking forward to having the touch screen on the tx16s, purely for the speed of programming that radio.
Lieber Joshua, suuuuper! Das war genau der richtige Tipp, den ich für meine Jumper T-Pro V2 gebraucht habe (Es funktioniert auch nur die FW 2.10 selfbuilt), sonst ist das Display gespiegelt 😂). Werde dir etwas spenden. Danke für deine tolle Arbeit! VG, Jo
Had the same issue on the Zorro with the internal 4in1 MultiPM. Could only select CRSF. Weirdly I could flash the 4in1 just fine but not select it. Even checked if they put in a ELRS module by accident. After searching through the menus, I figured it out eventually.
And once again you deliver the answer to my problem😃🙏🏼🎉 Thank you so much helping me and many other people understanding this hobby. Have a great day 🙂
Most likely not... Radios like the TX16, Zorro, T-Lite, etc generally come in two flavours (MPM, ELRS/CRSF) , so basically 50/50 chance default setting is correct (and then adjust for polularity. ie. MPM has been more common until now). However X9D and variants are only available as stock with internal XJT, so firmware defaults to that for those.
Thank You, So than is T-REX the best Analog FPV camera on the market or is my Ratel just as good long-range Airplane AKK Crossfire OpenTX RadioMaster TX16
I flashed my T-Pro with open TX and don't have that option. I can't figure out how to get the internal RF to show CRSF like it should. Is there a way to flash open TX to have it reflect the correct one or do I need to change it to edge TX?
I thought the JB special edition Radio Master came with Express LRS internal and not the 4 in 1. Am I confused? Probably, since I have only had my Radio Master for a couple of weeks and have yet to open the manual or even attempt to bind it to any of my receivers.
Thanks for sharing this video with me. I actually stumbled across this setting while trying to figure it out on my own. I have it set to CRSF, my question is: is the Baudrate the frequency? It gives the options for 115k, 400k, 921k, 1.87M, 3.75M, 5.25M. I'm running 2.4ghz, not sure what baudrate to use.
I just got a radiomaster zorro 4in1 with TBS crossfire nano external module. I just bought the geprc rocket plus tbs crossfire edition as well. I updated the external module, then paired it with reciever on drone. Flashing blue light (means update now going to drone module) then now solid green on drone and remote. I know remote is paired because it says telemetry lost if drone is powered off. Now, I have solid green lights on both drone and remote external module. Both are paired. But when trying to get stick feedback on betaflight or receiver feedback at all, nothing. I move drone around with my hand on 3D model betaflight first page, drone moves. But nothing on reciever tab. I tried serial uart, crsf module. I tried disabling abc filter on zorro remote settings (tells you to do that on betaflight settings). I need help please. Its got to be something in betaflight is wrong settings wise. I looked up youtube videos for days. Can never find a tbs crossfire setup on zorro, only elrs. Thank you in advance!
Hi Joshua .. I changed my CRSF to multi on my Radiomaster Pocket Cc2500 .. It’s only showing FRSKY X or X2 .. no good for D8 which I need as trying to bind Emax Freestyle 2 .. any ideas 😀☘️🇮🇪👍
Hi Joshua! Please help me, I have the Jumper T Lite V2 with internal ELRS and the option to CRSF does not appear in the RADIO SETUP. Then I tried to fix like you did, on the HARDWARE but it just not have the option to select the internal module, only the baud rate.
My guess is you have the older version of edgetx where the type of internal module is hard coded. Either you don't actually have a edgetx module (you bought the wrong radio by accident) or the wrong firmware was flashed to the radio somehow.
@@JoshuaBardwell yes, I was having problem to access the expressLRS on the tools menu: when I select expressLRS, just apears for me loading forever. So I thought it could be the firmware, so I downloaded the T Lite firmware and paste it on the SD card. I believe that what happened is that I downloaded the T Lite firmware and it doesn't have option for internal CRSF mode. Now, I have the internal module but can't use (dam it). I believe that if I could find the SD content of the T Lite V2 on internet I can solve it. But I just can't find!! Or, maybe, I can buy a external module of ELRS and use the radio as a T Lite with external ELRS. Can you give me your opinion? Thanks from a big fan of your channel
So my Radio Boxer I upgraded and then now I check internal module it states it’s off. And when select the tools screen and select express elrs it stays stuck kn loading screen.
new to the hobby and I got a tx16s Mark ii right off the bat. The 1st thing I did is upgrade the firmware which removed a bunch of the bloat on the sdcard. I don't think there is anything the stock sdcard has that you cannot put back on it. Like I have the ELRS version and the multi stuff is unnecessary as well as any of the TBS, ghost, frsky plugins. the extra languages, and all of the model plane junk, Might as well start with a clean slate. It would really be nice to have someone go through EdgeTX and tell us the recommended settings as well as what to ignore/clean up if you only fly quads.
After i flashed the multi module had a "no multimodule telemetry" message but once i got into one of my existing models and cycle the protocol options, after that i could see the version id of the multmodule...so all was well
I dont know if this is realated but I had some problems where there was the internal as "multi" and it didnt recognise is as external either. You can go into "radio.yml" on the SD card and change the internal module to CROSSFIRE or CRSF.
Hi! I have a problem with my tx16s markll elrs. If i go to settings, i cant open lua expressLRS. I get the screen: Loading. Can you help me? Thanks allot
@JoshuaBardwell i have had it for 6 months and used it on 5 drones, so it's definitely has an internal elrs module. I'm guessing that means the module is dead? I've never used it for a few months. I was just sitting in a bag. Turned it onclast week and this happened.
This is kinda off topic from the video but I really need help from anyone that can please I have a LiteRadio 3 pro version CC2500 and I have soldered a ELRS nano receiver to my baby ape drone and I have ordered the Elrs tx module it comes in tomorrow but I want to program the receiver now and fly my drone without the mod but I have no idea if I can or can’t do that can anyone help or give me a helpful video to watch please? Or if you can Mr. Bardwell can you help me please
wtf that seems dumb, its basically a second place to set the same thing. Thanks for the save, i swore this ebay seller sent me the wrong radio. lol wtf
@aspectttl2300 has been a week for me. Tried updating removed batterys let it sit. Tried unplugged and installing module again. Tried resetting the radio. Mine won't even bind to old drones it worked on before. If I connect a module on the back it works. So weird
Was just setting up my new radio and was confused after updating edgetx. Googled, this video showed up. Literally uploaded 2hrs ago! Thanks Joshua!
Thanks! This video saved my butt when I was out at a flying field and couldn't get my internal module to bind
Men, you just saved my evening. Minus 3 hours to update ELRS on tpro after installing EdgeTX, and finally that piece of.. sweet.
Thanks for all the info!! I just signed up for your Patreon. You have saved me tons of money by not screwing it all up without your help, haha. Thanks a lot man!!
Thanks!
You are the MAN !!! Finally, after all the misinformation about the TX16S floating around. You had the fix for the Internal Module I was having so much trouble with Express LRS loading ! - Thank YOU !! :-)))
This issue was driving me bonkers! Trying to bind to a Goosky S2 just wasn't working. Looked everywhere on the internet but to no avail. Then I found this video, and once again Mr Bardwell to the rescue. Thank you Sir.
Searching for this answer for a customers TX12 MK II , thanks Joshua you are the best!
Excellent! You can never incorporate too much complexity.
Nice piece of detective work, Joshua. Thanks so much for showing how to fix it.
Love your videos! Today I learned that my radio can decide by itself what internal module it has (or not) in the hardware menu... It changed by itself!
What a stuff around lol, good thing that you have put out this video for those people who have just updated their radio. I have the Zorro with internal 4 in 1 but haven’t updated it as yet, already flying 1 quad, and was going to update my tx16s to edge tx, and I wasn’t sure what I needed to do. I’m definitely keeping the tx16s as a backup and also for doing majorly long flights once I get a few more long range planes. Looking forward to having the touch screen on the tx16s, purely for the speed of programming that radio.
your my hero, stumbled on this issue tonight and your the only person with this fix!
i spent like 2 hours trying to figure it out and it's right there. Thank you so much. subbed and liked.
Thx for making that video! More time for coding, less for support requests. 🙂
Lieber Joshua, suuuuper! Das war genau der richtige Tipp, den ich für meine Jumper T-Pro V2 gebraucht habe (Es funktioniert auch nur die FW 2.10 selfbuilt), sonst ist das Display gespiegelt 😂). Werde dir etwas spenden. Danke für deine tolle Arbeit! VG, Jo
Had the same issue on the Zorro with the internal 4in1 MultiPM. Could only select CRSF. Weirdly I could flash the 4in1 just fine but not select it. Even checked if they put in a ELRS module by accident. After searching through the menus, I figured it out eventually.
Thanks!!! You saved my day. After 4 hours of trying to come in CRSF mode in internal module I get it (Jumper T-Pro V2 internal ELRS)
This freakin guy! Our hobby has endless quirks, saving my sanity!
And once again you deliver the answer to my problem😃🙏🏼🎉
Thank you so much helping me and many other people understanding this hobby.
Have a great day 🙂
Joshua, you just make things simple.
Mine was just gone. Reflashed and bingo. Thanks joshua
definitely saved my butt with this video, thanks Joshua!!
OMG, i was losing my mind! Thank you, good sir!
Thanks Joshua, this had be pulling my hair out until I saw this video.
You are the best JB!!!!
OW Thanks, Now I can use my TX16 with inturnal ExpressLRS!!!
Nice Jb always helping
Know it All ? You got a long way to go baby. 🤔
Thanks a lot, Joshua. Now I can update my TX16S, Zorro ELRS and LiteRadio3 Pro ELRS
Thank you sir, you have just save me a lot of time and stress, because i have exactly same problem and it is resolved.
my radio, the zorro, also lets me set the baudrate? I set it to 400 as the default?
I wander if that's going to happen with my X9D. 😬
Thanks a lot, Joshua!!!
Stay safe there with your family! 🖖😊
Most likely not... Radios like the TX16, Zorro, T-Lite, etc generally come in two flavours (MPM, ELRS/CRSF) , so basically 50/50 chance default setting is correct (and then adjust for polularity. ie. MPM has been more common until now). However X9D and variants are only available as stock with internal XJT, so firmware defaults to that for those.
@@pfeerick Yeah, makes sense. Thanks! 😊
Thanks Josh - that saved my day ! Thanks
Thank you so much... Im new to ELRS your videos help so much ❤❤❤
Do You have an opinion on OpenHD/RubyHD/WFB-ng or should I just stick to Analog FPV,I will not be buying DJI Walk snail or HD Zero
OpenHD needs high quality, fast hardware, to run at latency that would make it generally usable. For now, it's mostly a curiosity.
Thank You, So than is T-REX the best Analog FPV camera on the market or is my Ratel just as good long-range Airplane AKK Crossfire OpenTX RadioMaster TX16
Thanks a lot!! It saved a lot of my time.
I flashed my T-Pro with open TX and don't have that option. I can't figure out how to get the internal RF to show CRSF like it should. Is there a way to flash open TX to have it reflect the correct one or do I need to change it to edge TX?
I thought the JB special edition Radio Master came with Express LRS internal and not the 4 in 1. Am I confused? Probably, since I have only had my Radio Master for a couple of weeks and have yet to open the manual or even attempt to bind it to any of my receivers.
The JB special edition does come with ELRS internal. This is not the JB special edition :-)
Thanks for sharing this video with me. I actually stumbled across this setting while trying to figure it out on my own. I have it set to CRSF, my question is: is the Baudrate the frequency? It gives the options for 115k, 400k, 921k, 1.87M, 3.75M, 5.25M. I'm running 2.4ghz, not sure what baudrate to use.
No, the baud rate is not the frequency. The baud rate is how fast the data rate is between the radio and the module.
@@JoshuaBardwell so is there a way to go from 900mhz to 2.4ghz?
@@JoshuaBardwell sorry. I'm a total noob.
No that's not possible. The RF frequency is part of the radio module. Only by changing the radio module can you change the frequency.
THANK U THIS REALY HELP!!!!!!!!!!!!!!!!!!!!!!!🥰
I just got a radiomaster zorro 4in1 with TBS crossfire nano external module. I just bought the geprc rocket plus tbs crossfire edition as well. I updated the external module, then paired it with reciever on drone. Flashing blue light (means update now going to drone module) then now solid green on drone and remote. I know remote is paired because it says telemetry lost if drone is powered off. Now, I have solid green lights on both drone and remote external module. Both are paired. But when trying to get stick feedback on betaflight or receiver feedback at all, nothing. I move drone around with my hand on 3D model betaflight first page, drone moves. But nothing on reciever tab. I tried serial uart, crsf module. I tried disabling abc filter on zorro remote settings (tells you to do that on betaflight settings). I need help please. Its got to be something in betaflight is wrong settings wise. I looked up youtube videos for days. Can never find a tbs crossfire setup on zorro, only elrs. Thank you in advance!
Hi Joshua .. I changed my CRSF to multi on my Radiomaster Pocket Cc2500 .. It’s only showing FRSKY X or X2 .. no good for D8 which I need as trying to bind Emax Freestyle 2 .. any ideas 😀☘️🇮🇪👍
I wish all this stuff was written down somewhere.
Pro tip yt has automatic transcript, open any yt instruction video and you can just read it, Ctrl F to find the keyword you are interested in.
Hi Joshua! Please help me, I have the Jumper T Lite V2 with internal ELRS and the option to CRSF does not appear in the RADIO SETUP. Then I tried to fix like you did, on the HARDWARE but it just not have the option to select the internal module, only the baud rate.
My guess is you have the older version of edgetx where the type of internal module is hard coded. Either you don't actually have a edgetx module (you bought the wrong radio by accident) or the wrong firmware was flashed to the radio somehow.
@@JoshuaBardwell yes, I was having problem to access the expressLRS on the tools menu: when I select expressLRS, just apears for me loading forever. So I thought it could be the firmware, so I downloaded the T Lite firmware and paste it on the SD card. I believe that what happened is that I downloaded the T Lite firmware and it doesn't have option for internal CRSF mode. Now, I have the internal module but can't use (dam it). I believe that if I could find the SD content of the T Lite V2 on internet I can solve it. But I just can't find!! Or, maybe, I can buy a external module of ELRS and use the radio as a T Lite with external ELRS. Can you give me your opinion? Thanks from a big fan of your channel
Also important: I downloaded the open TX installer, set it to jumper T Lite with LUA script and updated to most updated firmware
Flash edgetx using this th-cam.com/video/L-j_mJhiJp8/w-d-xo.html
The solution helped me. Thanks -)
So my Radio Boxer I upgraded and then now I check internal module it states it’s off. And when select the tools screen and select express elrs it stays stuck kn loading screen.
I got a brand new Radiomaster MULTI Boxer radio from RDQ and it was set to crossfire. I did not update the software.
is there a possibility to change my internal taranis frksy module with a different module?
new to the hobby and I got a tx16s Mark ii right off the bat. The 1st thing I did is upgrade the firmware which removed a bunch of the bloat on the sdcard. I don't think there is anything the stock sdcard has that you cannot put back on it. Like I have the ELRS version and the multi stuff is unnecessary as well as any of the TBS, ghost, frsky plugins. the extra languages, and all of the model plane junk, Might as well start with a clean slate.
It would really be nice to have someone go through EdgeTX and tell us the recommended settings as well as what to ignore/clean up if you only fly quads.
After i flashed the multi module had a "no multimodule telemetry" message but once i got into one of my existing models and cycle the protocol options, after that i could see the version id of the multmodule...so all was well
THANKS! youre the best!
I dont know if this is realated but I had some problems where there was the internal as "multi" and it didnt recognise is as external either.
You can go into "radio.yml" on the SD card and change the internal module to CROSSFIRE or CRSF.
Hi! I have a problem with my tx16s markll elrs. If i go to settings, i cant open lua expressLRS. I get the screen: Loading. Can you help me? Thanks allot
Thank you Sir for that info.... Big help just switched myJumper to edgetx and can double checki am still set right...
thx, i faced this problem last week
can a batafpv radio bind with GEPRC SMART 35 Analog 3.5inch Micro Freestyle Drone (PNP)
What happens when the internal module is on and you still have a loading issue?
Usually this means you don't have an ELRS radio. Like you bought the 4-in-1 version by mistake.
@JoshuaBardwell i have had it for 6 months and used it on 5 drones, so it's definitely has an internal elrs module. I'm guessing that means the module is dead? I've never used it for a few months. I was just sitting in a bag. Turned it onclast week and this happened.
Yes thank you!!
Dude, you are cool!
Thank you so much
Thank you
Wow, Edge TX that is so much easier than open tx companion.
thanks, swapped the 4in1 to elrs on my Boxer and ran into this problem
thanks a Lot!!!!!
thanks bro
This is kinda off topic from the video but I really need help from anyone that can please I have a LiteRadio 3 pro version CC2500 and I have soldered a ELRS nano receiver to my baby ape drone and I have ordered the Elrs tx module it comes in tomorrow but I want to program the receiver now and fly my drone without the mod but I have no idea if I can or can’t do that can anyone help or give me a helpful video to watch please? Or if you can Mr. Bardwell can you help me please
Just gonna say this !!! Thank you so.much !!! I was ready to through my t pro out the window 🪟😤
You fucking legend......!!!! Thank you !!!
Not an issue, my internal xjt is dead lol
How that happen
wtf that seems dumb, its basically a second place to set the same thing. Thanks for the save, i swore this ebay seller sent me the wrong radio. lol wtf
I miss your intro. It was nice and short, as they should be.
i have the radiomaster zorro, i have switched the internal to crsf and when i go into expressLRS to bind my controller it just says loading....
I got a jumper and it's doing samething
@ I have been trying to figure this out for 2 weeks now🤦♂️
@aspectttl2300 has been a week for me. Tried updating removed batterys let it sit. Tried unplugged and installing module again. Tried resetting the radio. Mine won't even bind to old drones it worked on before. If I connect a module on the back it works. So weird
@ we need Joshua bardwell to help😭 that’s one in a million chance