Honestly Miss Playing Billiards. I Once Had A Standard Full Slate In My Living Room; Had To Dismantle It After A Flood, But I Still Have The Slate. Intended To Design It Into The Floor As A New Game.
Made a cue by hand with my wood lathe before I had a metal lathe... Honestly, it came out pretty much just as good. It's difficult to get the joints really perfect though....
Oie Boa noite sou jucelio um brasileiro apaixonado por tacos de sinuca és um verdadeiro mestre dos tacos especialmente poderia me presentear com um três destes seu tacos farei uma excelente propaganda de seus tacos que são magníficos exemplos de excelência em qualidade sou um fã deste trabalho de fabricação manual
You still have a lot to learn so that the product can be called a cue! Now you are like a student in the first grade. A cue is a very complex technology, from choosing a tree to gluing and loading a balance! In general, good luck)))
I really like your content, thanks a lot for your efforts, but the background music is so annoying. Why you don't just leave the working sounds? No one needs this dramatizing music to enjoy your videos...
You're right, definitely not quality. I've never seen a "master cue maker" take a full board and rip it down and cut it on the lathe right then. Real masters know if you do that it will probably warp. They have wood blanks pretty cut to 1 inch or less stock and let it sit in climate controlled area for months so that it warps or shrinks or does whatever it's gonna do when it dries BEFORE cutting it on the lathe also parts he used weren't that good and he put zero points or inlays or really anything decorative for that matter. It was just meh..lol
That cue is going to warp very very quickly. They need to be turned down slowly and gently and allowed to take their new shape. If you turn it down slowly, any warp that's going to come out can be usually corrected simply from the next series of turns but when you gouge it all out in one go, if and when it warps, which it almost certainly will, you can't fix it and it's a piece of firewood.
@@ReubenRosczyk lmao, I've been in the pool industry for over 20 years... there is a reason most low to mid range cues and almost all production cues are warped and it's from this right here, plowing out a product as quickly as possible to get it finished. The cues that don't warp take a minimum of 6 months to a year to build and are used with wood pieces that have been aged and prepared properly, turned down very slowly, and allowed to rest and take it's shape.
@@ReubenRosczyk You literally have no clue about woodworking. This cue will be crooked within a week, it takes months of taking off a few thousands at a time for the wood to stay true. This is a cheap p.o.s cue
Honestly Miss Playing Billiards. I Once Had A Standard Full Slate In My Living Room; Had To Dismantle It After A Flood, But I Still Have The Slate. Intended To Design It Into The Floor As A New Game.
저렇게 정밀한걸 손으로 해냅니다~~ 박수~~~
박수~~
진짜 장인들이네요. 주변에 당구 치는 사람이 많은데,영상을 소개하고 싶네요ㅎㅎ
Highly surprised that you still have all your fingers!
Mantab...dengan ketelitian yg cakep Mr... 👍👍
Ніколи не бачив, як виготовляються киї. Дякую за чудове відео, шана і повага майстру!...
Это кий? Это игрушка для ребенка, но точно не для игры!
Amazing skill 👍
Nice cue..
Здорово. Молодец.
멋집니다
Made a cue by hand with my wood lathe before I had a metal lathe... Honestly, it came out pretty much just as good. It's difficult to get the joints really perfect though....
잘
보구
가내유...^^
Watching sir very nice factory
장인의 포스가 느껴집니다.
great content!...
what type of wood lathe is that?
Top demais. Muita qualidade
In spanish.Exelente habilidad del tornero; hay una violación de las normas de seguridad en el trabajo.Trabajar en mangas largas,Gracias...
와 샷 묵직하네
Опасные ребята. Им мало работать в перчатках, так они ещё работают с долинными рукавами 🙁
👥 기계화 자동화 시스템으로 대량생산이 되는 시대에 아직도 맨손으로 하나하나 일일이 생산제조 공정에서 수작업으로 하나의 당구큐가 만들어지기까지 순서와 방식 원리
Oie Boa noite sou jucelio um brasileiro apaixonado por tacos de sinuca és um verdadeiro mestre dos tacos especialmente poderia me presentear com um três destes seu tacos farei uma excelente propaganda de seus tacos que são magníficos exemplos de excelência em qualidade sou um fã deste trabalho de fabricação manual
I wonder how many hours per cue stick it takes.
보통 고급 당구큐의 상대는 여러개의 쪽으로 만들어지는거로 아는데,
여기는 그냥 통으로 깍아서 만드네요?
이렇게 하면 고급상대처럼 여러개의 쪽으로 만드는것과 비교해서 장점이 뭐가 있나요?
아니면 그냥 보급형을 만드는 영상인가요?
집성이 아닌 일반 하우스 큐 하대입니다
고급상대라서 여러쪽이 아니고
각각 성능이 틀린거라고 생각하면 됩니다
물론 쪽상대가 조금더 비싸지만
컬리상대는 통상대가 더 비쌉니다
그냥 보급형 입니다. 장인이 정성을 영상에서 볼수 있었지만, 오히려 영상 보고 중국의 자동화로 생산되는 저가큐보다 신뢰가 떨어지네요.
은성은 거의 보급큐죠 디자인이 동호인이 선호할안한 수준이 전혀 아닙니다 보급큐도 한밭등등 요즘 데칼이나 전사로 이쁜게 많이 나와서 명맥만 유지하는 회사가 은성이죠 일부 선수(유명선수는 아님)에게 맞춤형큐는 만들어주긴하나 디자인이 쌍팔년도보다 못해서 영
세월의변화에 적응못하고 도퇘된회사
good
You still have a lot to learn so that the product can be called a cue! Now you are like a student in the first grade. A cue is a very complex technology, from choosing a tree to gluing and loading a balance! In general, good luck)))
Перчатки и циркулярка, рукава тоже закатывать не надо фрезерном
А показывали что их слоями ёлочкой клеят и слои разной твёрдости дерева идут, это может карамбольный кий такой
На запилах бывают кии. Это дороже и сложнее.
I really like your content, thanks a lot for your efforts, but the background music is so annoying.
Why you don't just leave the working sounds? No one needs this dramatizing music to enjoy your videos...
I like it
How much American for one of these cues?
It was not technology, but dexterity. Awesome
You're right, definitely not quality. I've never seen a "master cue maker" take a full board and rip it down and cut it on the lathe right then. Real masters know if you do that it will probably warp. They have wood blanks pretty cut to 1 inch or less stock and let it sit in climate controlled area for months so that it warps or shrinks or does whatever it's gonna do when it dries BEFORE cutting it on the lathe also parts he used weren't that good and he put zero points or inlays or really anything decorative for that matter. It was just meh..lol
С Уважением
bgm이 무엇인가요?
Be able to shoot around corners after a few months when it warps
Ну что, умники!!! Чо никто деда не решается учить, что в перчатках работать на циркулярке нельзя!))))
와.. 저렇게 한땀한땀 정성들여 만든 큐대로 울 담탱은 내 허벅지 타작에 쓰다가 분질러 먹은거야? ㅋ 장인분에 대한 존중이 없었네 ㅎ;
He’s turning down that wood really quickly which will cause the wood to warp
Pretty sure this dude knows what he's doing.
@@joshuaglaude1549 you think 🤣🤣🤣🤣
На циркуляре..., в перчатках...., мда 😏
That cue is going to warp very very quickly. They need to be turned down slowly and gently and allowed to take their new shape. If you turn it down slowly, any warp that's going to come out can be usually corrected simply from the next series of turns but when you gouge it all out in one go, if and when it warps, which it almost certainly will, you can't fix it and it's a piece of firewood.
Sure dude, I’m sure he does all this work by hand just to make a crappy cue. Or maybe, just maybe, you don’t know what your talking about.
@@ReubenRosczyk lmao, I've been in the pool industry for over 20 years... there is a reason most low to mid range cues and almost all production cues are warped and it's from this right here, plowing out a product as quickly as possible to get it finished. The cues that don't warp take a minimum of 6 months to a year to build and are used with wood pieces that have been aged and prepared properly, turned down very slowly, and allowed to rest and take it's shape.
I know nothing about cue building but I was thinking the same thing. No way a good cue can be made within a couple days and ready to shoot.
@@ReubenRosczyk You literally have no clue about woodworking. This cue will be crooked within a week, it takes months of taking off a few thousands at a time for the wood to stay true. This is a cheap p.o.s cue
It’s not a good quality cue so maybe these cues are the cheapest of cheap and not meant for longevity.
Solicito tacos..
Donde le llamo.
The touch
How does he not have a splinter
Это для дворовой команды
안전을 무시한 작업
맨손으로 작업하는거 말하는거 같은데 뭘 좀알고 말하세요.저렇게 회전하는 기계는 장갑말려들어가면 큰사고납니다.그래서 손말려들어가지 않게 맨손으로 하는거예요.
가만있음 중간이나.
@@배정희-p4l 너보다 잘알아..훈수 둘려면 제대로둬
@@eunjangdosmith5363 아는거 얘기해봐ㅋㅋㅋ
@@배정희-p4l 바보냐?
@@eunjangdosmith5363 어버버하지 말고 아는거 말해보라고ㅋㅋ
대체 음악은 왜 넣는지 통~~ 집중이 안됨
Hm
섬세하자도 않네
소음같은 음악 때문에 짜증나서 못보겟다
бл его не намотает🧐
Гавно кий для гавно каромболя.Для человеческого бильярда такое гавно не делают.Тут даже биение при шлифовке шафта он кривой))
Amater