Audi S3 8P DIY service full oil and oil filter change.

แชร์
ฝัง

ความคิดเห็น • 22

  • @CharlesCheeCC
    @CharlesCheeCC 4 ปีที่แล้ว +3

    That filter shell you can poke the bottom to leak out the oil in it

    • @AdeReeves
      @AdeReeves  4 ปีที่แล้ว +1

      Arrrr that makes sense...ill try it next time..

  • @mrdaryll275
    @mrdaryll275 7 หลายเดือนก่อน +1

    Thanks for uploading this video, very handy… Used it to do mine today. Next job is brake discs and pads, I’ll be using your other video.
    Top chap🫡

    • @AdeReeves
      @AdeReeves  7 หลายเดือนก่อน +1

      Glad it helped...the brakes are fairly easy...just make sure you take your time and the pistons all work freely....you won't go far wrong.

  • @terryfenner8142
    @terryfenner8142 4 ปีที่แล้ว +2

    Really helpful video, doing an oil change this weekend on my 2.0 TFSI , it’s an 06 car but it’s new to me... I’m guessing that once you push the release valve on. Ottoman of oil filter housing to release the contained oil the valve closes by its self once drained ??

    • @AdeReeves
      @AdeReeves  4 ปีที่แล้ว

      Hi Terry... Did a little look online to try to work out the valve at the bottom of the oil filter and it seems "a special tool" surprise surprise is required ... Some people have made a tool up and it basically pushes the spring loaded valve up to release the oil from the canister... To be honest I'm OK with a little mess unscrewing the housing itself as its easy to clean.. Got an oil change to do myself soon so may film it again if people are not too bored of my doing it yet LOL...

    • @terryfenner8142
      @terryfenner8142 4 ปีที่แล้ว

      Ade Reeves Audi requiring a special tool ... never 😂😂.. I will stick to your method and have a few rags at the ready ... thanks again 👍stay safe

  • @jerryx2000
    @jerryx2000 7 หลายเดือนก่อน +1

    do you still own this car? Any flaws? Did this model have the valve carbon build up?

    • @AdeReeves
      @AdeReeves  7 หลายเดือนก่อน

      did the carbon clean on the timing chain video...was 100% reliable for me , and just found out it may be up for sale ..so !!!

    • @jerryx2000
      @jerryx2000 7 หลายเดือนก่อน

      @@AdeReeves then why are you selling it?

    • @AdeReeves
      @AdeReeves  7 หลายเดือนก่อน +1

      @@jerryx2000 needs must :)

  • @TallissaPentti
    @TallissaPentti 8 หลายเดือนก่อน

    I have lost the threads of one of the PCV Valve screws from the same car. Do you know how to get that screw to hold again?

    • @AdeReeves
      @AdeReeves  8 หลายเดือนก่อน +1

      I guess you could replace it ... or maybe fill it with resin and drill/ tap it ..

  • @johnmorrison9072
    @johnmorrison9072 4 ปีที่แล้ว

    you got oil all over your gear box and what was the point of that axel stand

    • @AdeReeves
      @AdeReeves  3 ปีที่แล้ว +1

      rust prevention .. 😉

  • @jordanvolson8476
    @jordanvolson8476 3 ปีที่แล้ว

    Can I change the oil filter without taking out the oil ??????

    • @AdeReeves
      @AdeReeves  3 ปีที่แล้ว +1

      You might want to ask that question to yourself out loud.. you probably could...but why would you want too :)

    • @jordanvolson8476
      @jordanvolson8476 3 ปีที่แล้ว

      I changed the oil... it’s my car lol ...... so what happen was I couldn’t get the right spanner to remove the oil filter... I put the new oil in .... so just wanted to know if I could change the filter without removing the oil ..... I never run the engine as yet .... so the new oil never go through the engine as yet

    • @AdeReeves
      @AdeReeves  3 ปีที่แล้ว +1

      @@jordanvolson8476 well in theory ... most of the oil would drain back to the sump, you will loose what ever is in the filter but that's about it... I must say I have never tried it but I guess it's "Do-a-ble" if you are quick .. Cheers A.

  • @miguellm
    @miguellm 4 ปีที่แล้ว

    What size has the wrench for oil filter? 36? Thanks