U shouldn't need both. One usually does it unless u didn't get the correct relay under the dash. Also make sure your other outside lights are not out. If one of your other lights are out it will hyper flash the other side lights
So for the LED U bars to be on, you need to have your parking lights on or full headlights on?,(outer lower and upper either high or low beam) or just the normal Daytime running lamps?
@@Konan750 i have a video of the switchbacks on my relay video and my headlight bulbs are auxbeam bulbs but I got a video on each light and the link for the bulbs are in the description of the videos of each one
Yes but only to the constant power wire of the 3. The negative to the ground and the power to the constant power cause the other wire is the blinker wire. If u wire it to the blinker wire the u bar leds will go off and on with the blinker. I didn't want that
@@rikkidiesel I want them to be on when the headlights are on but I would like them to blink with the blinker when engaged. Which way should they be wired?
@@rikkidiesel I changed my mind I found a video and I didn’t like how they look so I will copy what you have done. So the constant to the corner light(blinker) and where does the rest of the wiring go? Into the mini bulb?
@@Cmoody_57 no the constant power is one the three wires on the actual blinker wire. Ones a ground, ones constant power and ones the blinker. U want to just use the constant and negative wires. Just cut the wires so u don't have a ton of slack but enough just in case u need to take out your headlights. Buy some T splice connectors so u can take them off easy
so forgive me for saying this. I just ordered these and i want the drl light strips to be on as long as the ignition is on. Is that how yo have it wired, where if the truck is running they are on? I have seen it where they are only wired into the driving lights but then they dont come on at night, or wired only to the headlights, but then they arent on in the day. I want the strips on all the time.
If u want them on all the time then u would have to wire them to a switch cause if u wire them to constant power they will stay on even when the truck is off. So u will have to wire them to an on/off switch
I had mine in just a year and they are all cracked up and can’t see out of them anymore. They are peeling bad. I love the look of them but the Quality sucks
I got the switch back lights installed, how do I make them not flash really fast?
U will either need the relay or load resistors to stop it from hyper flashing
@@rikkidiesel okay thanks man
@@rikkidiesel got a relay, didn’t fix it so I guess I need resistors
U shouldn't need both. One usually does it unless u didn't get the correct relay under the dash. Also make sure your other outside lights are not out. If one of your other lights are out it will hyper flash the other side lights
@@rikkidiesel I got the right one, I have all new lights, they work so I just need the resistors
You have windshield tint, if so what percent?
50%
Great video! So is that the regular Cateye hood with HD grill?
Yeah the 05-07 HD grill and hood
What bumper is that?
Its a grave fab bumper. I have whole video on it on my channel
So for the LED U bars to be on, you need to have your parking lights on or full headlights on?,(outer lower and upper either high or low beam) or just the normal Daytime running lamps?
Great Job! Getting ready to do my 07 Classic. How many bulbs total did you need?
In this video, I didn't do any bulbs 😅
@@rikkidiesel What bulbs are you running? Do you have a link for leds
@@Konan750 i have a video of the switchbacks on my relay video and my headlight bulbs are auxbeam bulbs but I got a video on each light and the link for the bulbs are in the description of the videos of each one
Do they com in pairs when u order from Amazon?
@@lewisdoe4137 yes u get a full set up
So you wired the top and bottom into the blinker?
Yes but only to the constant power wire of the 3. The negative to the ground and the power to the constant power cause the other wire is the blinker wire. If u wire it to the blinker wire the u bar leds will go off and on with the blinker. I didn't want that
@@rikkidiesel I want them to be on when the headlights are on but I would like them to blink with the blinker when engaged. Which way should they be wired?
@@Cmoody_57 then u gotta wire the positive to the blinker wire
@@rikkidiesel I changed my mind I found a video and I didn’t like how they look so I will copy what you have done. So the constant to the corner light(blinker) and where does the rest of the wiring go? Into the mini bulb?
@@Cmoody_57 no the constant power is one the three wires on the actual blinker wire. Ones a ground, ones constant power and ones the blinker. U want to just use the constant and negative wires. Just cut the wires so u don't have a ton of slack but enough just in case u need to take out your headlights. Buy some T splice connectors so u can take them off easy
What bulbs are you using?
My headlight or turn signals?
@@rikkidiesel It looked like the LED ones.
@@FrederickMOwen like these?
switchback turn signals
amzn.to/2HpcQYq
Which bulbs are you running for the low and high beams?
Auxbeam in both 9006 and 9005
so forgive me for saying this. I just ordered these and i want the drl light strips to be on as long as the ignition is on. Is that how yo have it wired, where if the truck is running they are on? I have seen it where they are only wired into the driving lights but then they dont come on at night, or wired only to the headlights, but then they arent on in the day. I want the strips on all the time.
If u want them on all the time then u would have to wire them to a switch cause if u wire them to constant power they will stay on even when the truck is off. So u will have to wire them to an on/off switch
They look good on the truck I've seen ya around I.F looks damn good. Might get a set of them or just keep the stock look
Thanks man. They are pretty slick
@@rikkidiesel I'm still thinking bout it. But I like the stock look. I. Sure you've seen cat-eye at BIG O
👝
Do they come in pairs when u order from Amazon?
yes of course
I love the cat eyes!!
Still gotta get mine spliced into the driving light
Do you want to sell your stock headlights?
I had mine in just a year and they are all cracked up and can’t see out of them anymore. They are peeling bad. I love the look of them but the Quality sucks
Dang well hope this one holds up
Nice
😱
Put electric grease in those t-taps or your gonna get corrosion!!! I learned from experience.
Yeah I did lol I learned the same thing too😅