Configuring the Behringer FCB1010 with the Line6 HX Stomp
ฝัง
- เผยแพร่เมื่อ 21 เม.ย. 2020
- I was looking for a way to utilize the Behringer FCB1010 MIDI controller to act as more of a pedal board for my Line6 HX Stomp. This video will go through a high level of how to program the unit to work with the HX Stomp.
A couple of references that I mention in the video:
Mountain Utilities - FCB1010 Manager - This is the free software that can be used in conjunction with a MIDI to USB cable for programming your FCB1010. I personally found the software useful for displaying a layout of how I wanted my board to be configured.
mountainutilities.eu/fcb1010
FCB1010 Full Tutorial - • Behringer FCB1010 Full...
FCB Manager Tutorial - • FCB1010 Manager Tutori...
HX Stomp Owner Manual - line6.com/data/6/0a020a4010c9...
Page 49 is the page with all of the CC codes of importance for programming your FCB1010.
I've watched 15 videos on the FCB1010 but yours is the first to give me the information I am looking for - thanks
I'm glad to hear that this video has helped you out!
If you don't want to use a block for your expression volume, just assign the volume parameter in an 'always on' block like the amp or a compressor to your expression pedal, give it a min value of around -18dB, because if you go 0% to 100%, the smallest variation in the position of the exp pedal will be huge.
Hey, man! I found a way to use the expression pedals without adding a specific block. You have to use Stomp's Learn function. You can set both volume and effects: Wah and pitch, for example.
how?
@@adg2011mm you set a Midi value on the exoression pedal from the Behringer and set this pedal to control the volume at the end of your chain (in HX). You can acess this volume true the circle at the end of the chain. The problem with this method is that you need to set this for every pre-set you have. But it works.
you kind of use the output from the HX as a volume pedal
Need help with my Line-6 POD HD500X and FCB1010, please. I have searched for a long time and your function of SNAP Shot may be the nearest way. I used my FCB1010 with Yamaha-DG80 many years ago. Those presets listed with consecutive number so it was not hard. The HD500X uses 1A, 1B, 1C, 1D then 2A......all the way to 16D. It has footswitch but the View of Big Letter will not automatically show. I have to bend down and use finger to tap the button. Very hard to do with guitar on my neck.
I tried to download software FCB1010 Manager or Edit but have problem with Beringer Firmware still = "Unknown". Right now I can use the FCB1010 pedal 1-5 & 6-10 with Up-Down and activate about 20-30 Snapshots or Presets. But they are not in proper sequenes plus the errors of wrong amp, filters and mixtures. Thanks,
PS: I can use just 1 line of Midi Cable Out from FCB1010 to HD500X in? I'm still strucggling with full Midid conn between PC and FCB1010.
How do you control the wha with the Exp pedals of the 1010?
Jesus, this thing looks like a massive pain in the arse! Can it send multiple messages per pedal? Ideally, I'm looking for something that will control my guitar fx and a DMX controller *simultaneously*, ie when I hit pedal 1 the distortion kicks in and the stage lights change, for example. Is that doable on this?
It's not bad once you understand what is going on...There is a learning curve, but the satisfaction of getting it to work the way that I wanted was worth it for me. I no longer have the FCB1010 or the HX Stomp, so I can't directly answer your questions from experience, but based on what I've read, it does look like the FCB1010 should be able to handle sending multiple MIDI commands at once.
FCB1010 with hx stomp Set midi channel to 1 on HX and FCB
Expression Pedals
Bank 00 (or whatever u want)
Hit the FS you want to program
Hold DOWN button 3 sec
hit up button (confirms edit mode)
Need ONLY fs 8&9 with solid led (press and hold them to get there)
press 8 so it blinks
press up to confirm
select CC number. Can be whatever you want (need to set it on helix)
press up to confirm
Set low value of 00.
press up to confirm
press 9 so it blinks
press up to confirm
select the CC number you already set
press up to confirm
Set High value of 127 (high and low can be swapped to reverse it)
press up to confirm
hold down to save and exit edit mode.