Glad it helped and if you ever have any questions on small engines for lawn or powersports just ask on here and i will try to answer your question to the best of my ability.
Nice video. I think I pulled too agressively and broke off the little holder tabs because suddenly, the starter would just spin when there had been no issue before. Problem was that when I took it apart, both holder tabs were cleanly broken off and I didn't realize the pawls were missing the tabs. I saw some pics and began to wonder and then your video confirmed it. I had the idea of fixing with little screws but wasn't sure it would work until your video confirmed that it would so now the starter assembly is working properly. Thanks!
I have willingly cut them off drilled and put steel pins in to replace the tabs because some older models break a lot because of heavier pressure release valves on startup
Great video, worked perfect. Just add that I had to carefully tap out old pins on mine ! Thank You
me too
Good job in explaining the process and the right parts ! Thanks..
This was very helpful as both pawls on my unit were broken and I had no idea how to install them.
Glad it helped and if you ever have any questions on small engines for lawn or powersports just ask on here and i will try to answer your question to the best of my ability.
Great job and Thank You for information and advice
Your video helped greatly, I'm working on a similar Craftsman trimmer with the same problem, now I know how it goes together Thanx😅
Nice video. I think I pulled too agressively and broke off the little holder tabs because suddenly, the starter would just spin when there had been no issue before. Problem was that when I took it apart, both holder tabs were cleanly broken off and I didn't realize the pawls were missing the tabs. I saw some pics and began to wonder and then your video confirmed it. I had the idea of fixing with little screws but wasn't sure it would work until your video confirmed that it would so now the starter assembly is working properly. Thanks!
I have willingly cut them off drilled and put steel pins in to replace the tabs because some older models break a lot because of heavier pressure release valves on startup
Good information. It helped me figure out what’s was wrong with my paws
It's pawls stupid
Great video.
Thanks for sharing.
New subscriber here