My 9 Project Plan Bundle (Includes this Project): ibuildit.ca/blog/the-9-plan-bundle/ While there's nothing wrong with my older fence design, I thought that this one would be an interesting challenge - to make a self-squaring fence that locks on the back as well as the front. I've had a number of people who have asked if this could be done and I figured now is as good a time as any to answer that! Yes, it can! And it works beautifully. See the build article for this project for more details: ibuildit.ca/projects/locking-table-saw-fence/
your projects, works are the highest level of quality, it's like tools made to last, you're level festool, sawstop, Felder, your machine doesn't lose any quality for them, thanks for sharing 🙏.
Dang it, now I have to make the new version! I have the older version that only clamps onto the front rail and it has been working just fine so thanks for the brilliant plans for the old version. 🙂
John, so glad you're back doing woodworking projects rather than electronics. You are an amazing builder, problem solver and inventor. Thank you for doing and sharing your processes and projects. I've been inspired in a huge way and in my opinion you are one of a select handful of the all time greats on youtube for sure! I've just purchased your plan pack and can't wait to build something great!
John, just got my plans yesterday and I am having fun just going through them. I really appreciate all of your projects and am in awe just how good you are. Thanks for the table saw fence, I think it will go great on my father's old craftsman. Thanks again.
I'm always so impressed by your ideas, your designs, and your craftsmanship.. yet I'm always perplexed by how your videos tend to just.. stop. It seems a rarity that you spend even just a moment exhibiting the functionality of the stellar design you've just implemented, which is perhaps where the greatest sense of satisfaction comes from as a spectator. I presume the choice is deliberate, considering how calculated all other aspects of your videos are, but I've noticed that vacuum.. that unfulfilled desire to see what you've built in action time and time again at the end of more than a handful of your videos. Either way, always a delight to watch and learn!
I built the previous version which works quite well and is very accurate. The new updated one will be even more accurate as it locks front and back so will counteract any side pressure on the fence. Great job John and keep up with new projects, plans and videos. You are definitely an inspiration . Another plus with this type of fence is that it is hassle free to remove if you want to use a crosscut sled or need the sawtop for another purpose.
Great value for all those plans John! I plan to purchase ASAP! I bought and built the first version a couple of years ago. It does a wonderful job with complete accuracy on my vintage early 1950’s 113.xxxxx Sears Craftsman saw.
I'm still in the process of building up my workshop (which involves gutting my garage, since it turns out it was put together so badly by the previous homeowner that I'm pretty sure it's illegal), but I still bought this plan bundle. Once I get the actual walls and electrical back in place, I'm going to be using these plans a lot! Thank you!
The original fence works so well for me. The plans and accompanying TH-cam videos made it a pleasure to build. I need to build another table saw now to justify the new fence!
John, I like to challenge my own knowledge and problem solving thinking to build things, also because I'm still a rookie in this area, but I'll buy your bundle because I love your channel and you deserve all my apreciation and recognaicence.
Good timing! Having accidentally destroyed my fence built from your original plans, this one will be a great upgrade replacement - I'll buy the plans for this one too as I'm working on a new table saw build right now.
thank you. I have built many of your fences, each one a little better, until I finally could afford a decent table saw, which has a good fence. Then, I realized my contractors saw fence was unusable. Built another one, works great for me, but if anyone else uses it, well, they always push to hard. Gonna build the new one for the contractors saw, and love giving you $$ because you give great content, informatively and practically.
Great design John 👍 , will build this some time in the future since the old fence is still going strong and looks like it's not quitting any time soon. 😀
I have to be Honest you have a great way of putting the job over easy. Very clever .Many thanks for all your years of videoing 10/10Gerald UK south wales
Great build John. As are all of your builds. You explain the ‘how-to’ very well and your plans (at least the ones I bought) are spot on and very handy for DIY’ers like me! Thanks mate!
I made your original design which displaced sliced bread from the top of my list of Best Things. I too wanted to be able lock its rear end in place, but was leery of a mechanical clamp because that was what was on the fence that came with my table saw and it was unreliable. It tended to move the rear end of the fence slightly when I actuated the clamp. I settled on a switchable magnet which solidly anchors the end of the fence to the cast iron table when actuated. It has performed flawlessly. My only regret is I didn't think of it before I built the fence because then I could have easily made it actuated by the front lever instead of having to take the extra step of manually turning the magnet on/off.
Great videography and an excellent project. If i was a woodworker I would certainly buy your plan bundle. But to be honest John, i just like watching you work. Thanks for sharing.
Brilliant work, John! Nicely done! 😃 Something I've seen some people do is to add a piece of plastic in the sides of the fence... I don't remember the correct name now, but the one they use to make cutting board from. Anyway, stay safe there with your family! 🖖😊
Fence exact like in my old bosch pts10 jobsite saw. Good concept, work fine by years. I even thought, make similar to my new/old 700kg 400V cast iron table saw.
As usual John, wonderful, clear, simple, informative and straightforward. Excellent work, again, as usual lol, thanks mate, great work, more power to you 👍😎👀
Great design, so simple yet i could have never come up with that! Only idea I would have to improve it would be to bevel the measurement pointer at a 45 or even 30° angle (like a knife) to make it a bit easier/ more accurate to read. That would also make it a bit more dangerous if not in use though.
I missed out on the bundle plan. Oh well. (Stupid surgery, LoL!). Great build as always. I need to build a better fence for my old Craftsman contractor saw. But first I'm going to build it into a cabinet so I have a larger working surface. Before the comments start, I've heard and read all of the "vibration" complaints about my particular saw and I honestly don't have that problem since I tuned up my table saw using Stumpy Nubs advice. My antique saw cuts like butter, straight as an arrow and has almost no vibration. Sadly though, with the original fence I only have a 13" max cutting width. If I want to cut wider than that I have to do it with a circular saw or eyeball it on the table saw and dangerously without a miter gauge or fence. I'm sorry, but free hand on a table saw is not appealing to me. LoL.
Great design! Good engineering and execution! With all that, please consider facing the 2 round portions contacting the front steel locking plate with SS or brass shim stock (~1/2 in.x 3 in.) so the wood is not worn by the steel. And these strip are forever replaceable!
I got the plans and am putting the rest together today. Simple to build. I like it. I tweaked it a little but that is just because I have a very specific workbench. Your emergency stop in the video has a DIY push button. You may laugh at me but if you should hurt yourself God forbid and the insurance sees that you altered the switch, they may use this as a reason to not pay. The switch is UL listed and any modification will void the listing which makes it unsafe in the eyes of authorities. Ref. National Electric Code 90.7, 110.2, 110.3(B) and (C). Just looking out for a brother.
Hey thanks a lot for making this video. The fence on my piece of junk ryobi job site saw is driving me nuts lol. I guess I know what I’m making next when I’m done building your bar clamps. So thank you, grazie, gracias, and danke schöne my friend.
WAIT!!! he used regular wood glue? Not construction adhesive? Invasion of the Body Snatchers is REAL!!! We now have PROOF!! LOLOLOOOLOLOLOLOLOLOL cool piece, been thinking of doing something similiar to my old Craftsman saw from the 90's that the stuck fence wont stay square to the table, it always rolls out at the back, think the square tube is actually bent!.
I was on the fence about your last version, but this one looks much easier to make, and it will make my vintage Sears table saw much better. Thanks for the great plans, and incredible value on your sale price. Love all of your projects and your twists on solving problems.
John, you mention that you made a jig to mount the rail but you did not mention in the video, or the article regarding the build nor in the plans what hgt the rail needs to be mounted at in relationship to the table saw top. Also part A (rail face that mounts to table) you not it to be 2-1/4 tall but you are mounting yours under the overhang of your table top. I figured this out only after I cut the piece per your directions. My table top is flush with the table edge.
I can't give an exact measurement because plywood varies in thickness. When the fence rail is mounted at the right height, there will be a small gap between the fence and the top of the table saw. Use the fence itself to help install the rail at the right height and adjust as needed.
Hi. Very nice. I was wandering why you opted for a flat bar to lock the back rather than a round pin which would be far more accurate and then add a thin steel or aluminium strip along the back edge of your table for contact?
About to build a new fence for my new home made table saw and again jumped on your channel since I've used your old design building a fence in the past. Now about this new design... Correct me if I'm missing something, but as I see it the threaded rod doesn't contribute at all clamping the back side of the fence configured this way. What I'm thinking is 2 nuts are needed, thightened 1 on each side of the metal plates (front side) and the threaded rod itself musn't be on the handle itself, but over the pivot point of the metal plates, which in this case is the screw that holds them to the fence. This said, the screw that holds the metal plates must be somewhere in the middle of them, not on the top. This way clamping down with the handle would pull the rod together with the metal plate on the back. Otherwise I really can't figure out how the rod is helping?
Sorry for the amateur question here! I just got a drill press to complete this project and was wondering - what speed do you have your drill press for the 3 parts you use it for in the build: 1. drilling the countersunk holes in the birch plywood 2. drilling the holes in the steel plates 3. drilling the hole in the pivot pin?
Thanks again John for another brilliant design idea! Well done, Sir! Also, I notice you're using Robertson screws - yet another proud CANADIAN invention! (P.S.: LOVE the Rush t-shirt! The greatest band on Earth - still ANOTHER source of Canadian pride!)
My 9 Project Plan Bundle (Includes this Project): ibuildit.ca/blog/the-9-plan-bundle/
While there's nothing wrong with my older fence design, I thought that this one would be an interesting challenge - to make a self-squaring fence that locks on the back as well as the front. I've had a number of people who have asked if this could be done and I figured now is as good a time as any to answer that!
Yes, it can! And it works beautifully.
See the build article for this project for more details: ibuildit.ca/projects/locking-table-saw-fence/
Hi John, can you provide this project with Metric measurements?
B
John some reason you are being ghosted on telegram
Emailed it
8
your projects, works are the highest level of quality, it's like tools made to last, you're level festool, sawstop, Felder, your machine doesn't lose any quality for them, thanks for sharing 🙏.
Dang it, now I have to make the new version!
I have the older version that only clamps onto the front rail and it has been working just fine so thanks for the brilliant plans for the old version. 🙂
I built the previous one for Sears table saw. It is working very well.
John, so glad you're back doing woodworking projects rather than electronics. You are an amazing builder, problem solver and inventor. Thank you for doing and sharing your processes and projects. I've been inspired in a huge way and in my opinion you are one of a select handful of the all time greats on youtube for sure! I've just purchased your plan pack and can't wait to build something great!
Woodworking skills and ideas, and video and vocal presentation are all superb. Best wishes from an aspiring British woodworker living in Japan.
John, just got my plans yesterday and I am having fun just going through them. I really appreciate all of your projects and am in awe just how good you are. Thanks for the table saw fence, I think it will go great on my father's old craftsman. Thanks again.
I'm always so impressed by your ideas, your designs, and your craftsmanship.. yet I'm always perplexed by how your videos tend to just.. stop. It seems a rarity that you spend even just a moment exhibiting the functionality of the stellar design you've just implemented, which is perhaps where the greatest sense of satisfaction comes from as a spectator. I presume the choice is deliberate, considering how calculated all other aspects of your videos are, but I've noticed that vacuum.. that unfulfilled desire to see what you've built in action time and time again at the end of more than a handful of your videos. Either way, always a delight to watch and learn!
Normal viewer retention is less than 30% of video length, anything added at the end is usually a waste of time, lol.
@@KipdoesStuff except that for those who do like to enjoy the whole thing, it's valid to give feedback. Lol.
@@KipdoesStuff it would be nice to see the finished piece though and watch it in action!
He showed the whole thing in action right at the beginning of the video.
I built the previous version which works quite well and is very accurate. The new updated one will be even more accurate as it locks front and back so will counteract any side pressure on the fence. Great job John and keep up with new projects, plans and videos. You are definitely an inspiration . Another plus with this type of fence is that it is hassle free to remove if you want to use a crosscut sled or need the sawtop for another purpose.
Great value for all those plans John! I plan to purchase ASAP! I bought and built the first version a couple of years ago. It does a wonderful job with complete accuracy on my vintage early 1950’s 113.xxxxx Sears Craftsman saw.
You're projects and wood working skills are on another level of excellence.
I love your speaker projects as well.
I'm still in the process of building up my workshop (which involves gutting my garage, since it turns out it was put together so badly by the previous homeowner that I'm pretty sure it's illegal), but I still bought this plan bundle. Once I get the actual walls and electrical back in place, I'm going to be using these plans a lot! Thank you!
Awesome! Thanks!
The original fence works so well for me. The plans and accompanying TH-cam videos made it a pleasure to build. I need to build another table saw now to justify the new fence!
Hey, router tables need fences too. Just saying!
John, I like to challenge my own knowledge and problem solving thinking to build things, also because I'm still a rookie in this area, but I'll buy your bundle because I love your channel and you deserve all my apreciation and recognaicence.
You are one of the few that makes your own machines nice work and video.
Ohhh the wood clamps how neat!!❤
Good timing! Having accidentally destroyed my fence built from your original plans, this one will be a great upgrade replacement - I'll buy the plans for this one too as I'm working on a new table saw build right now.
thank you. I have built many of your fences, each one a little better, until I finally could afford a decent table saw, which has a good fence. Then, I realized my contractors saw fence was unusable. Built another one, works great for me, but if anyone else uses it, well, they always push to hard. Gonna build the new one for the contractors saw, and love giving you $$ because you give great content, informatively and practically.
This man has so much knowledge and skill!! He’s got a sub for life! Great work sir!
Great job! Can't wait to include this on my table saw rebuild starting next week, after I finish my slight adaption to your Miter saw station!
Ingenious design as usual. Good job John!
Great design John 👍 , will build this some time in the future since the old fence is still going strong and looks like it's not quitting any time soon. 😀
Thanks!
I have to be Honest you have a great way of putting the job over easy. Very clever .Many thanks for all your years of videoing 10/10Gerald UK south wales
Great build John. As are all of your builds. You explain the ‘how-to’ very well and your plans (at least the ones I bought) are spot on and very handy for DIY’ers like me! Thanks mate!
Glad to see you are back online!
Hi John, hope you're well, have a good one
that looks straightforward enough. Nicely done. Might try to adapt this to my saw.
Great idea of back lock, very simple and clear design. Thanks a lot.
Don't Fence Me In....now I've got that song stuck in my head...thanks John... lol ;)
I made your original design which displaced sliced bread from the top of my list of Best Things. I too wanted to be able lock its rear end in place, but was leery of a mechanical clamp because that was what was on the fence that came with my table saw and it was unreliable. It tended to move the rear end of the fence slightly when I actuated the clamp. I settled on a switchable magnet which solidly anchors the end of the fence to the cast iron table when actuated. It has performed flawlessly. My only regret is I didn't think of it before I built the fence because then I could have easily made it actuated by the front lever instead of having to take the extra step of manually turning the magnet on/off.
I made the first one from your plans and haven't had an issue with it. Definitely a good improvement in the design though 👍
Great to hear :)
Great videography and an excellent project. If i was a woodworker I would certainly buy your plan bundle. But to be honest John, i just like watching you work. Thanks for sharing.
The man who blew into Playwoods 🙂
I love your jobs because they are very fonctional and very smooth 👏👏👏
Good luck
Excellent work John, just excellent.
Brilliant work, John! Nicely done! 😃
Something I've seen some people do is to add a piece of plastic in the sides of the fence... I don't remember the correct name now, but the one they use to make cutting board from.
Anyway, stay safe there with your family! 🖖😊
@A C Yeap, that's it! PTFE! 😊
Fence exact like in my old bosch pts10 jobsite saw. Good concept, work fine by years. I even thought, make similar to my new/old 700kg 400V cast iron table saw.
John "Right-n-Square" Heisz, amazing work
You did it again ! Great job !
As usual John, wonderful, clear, simple, informative and straightforward. Excellent work, again, as usual lol, thanks mate, great work, more power to you 👍😎👀
Great design, so simple yet i could have never come up with that! Only idea I would have to improve it would be to bevel the measurement pointer at a 45 or even 30° angle (like a knife) to make it a bit easier/ more accurate to read. That would also make it a bit more dangerous if not in use though.
I missed the Offer but as a Subscriber, I thought I’d see this video sooner. It was listed in my Video Contents on Sept 5th, 2022.
Ohhh, ma sei sempre bravissimo! Sei un genio ed esteta.
Thank-you John great video great work really good.
Your craftsmanship is pretty awesome!!
Great build and a great t-shirt!
I missed out on the bundle plan. Oh well. (Stupid surgery, LoL!). Great build as always. I need to build a better fence for my old Craftsman contractor saw. But first I'm going to build it into a cabinet so I have a larger working surface. Before the comments start, I've heard and read all of the "vibration" complaints about my particular saw and I honestly don't have that problem since I tuned up my table saw using Stumpy Nubs advice. My antique saw cuts like butter, straight as an arrow and has almost no vibration. Sadly though, with the original fence I only have a 13" max cutting width. If I want to cut wider than that I have to do it with a circular saw or eyeball it on the table saw and dangerously without a miter gauge or fence. I'm sorry, but free hand on a table saw is not appealing to me. LoL.
Awesome project and Amazing choice of t-shirt
Very nice fence, and we've seen many. We shared this video on our homemade tools forum this week 😎
Всегда подкупает безупречность работ, даже в мелочах! John, что бы Вы не делали на конце получается шедевр. Желаю Вам всяческих успехов!
Попробуй повторить зажим не работает. Один центр экс центра нет зажим идёт с одной стороны.
Amazing! Im Staying here 4 a little bit longer😉
Great design! Good engineering and execution! With all that, please consider facing the 2 round portions contacting the front steel locking plate with SS or brass shim stock (~1/2 in.x 3 in.) so the wood is not worn by the steel. And these strip are forever replaceable!
Your wood shop is nice and clean.
I got the plans and am putting the rest together today. Simple to build. I like it. I tweaked it a little but that is just because I have a very specific workbench. Your emergency stop in the video has a DIY push button. You may laugh at me but if you should hurt yourself God forbid and the insurance sees that you altered the switch, they may use this as a reason to not pay. The switch is UL listed and any modification will void the listing which makes it unsafe in the eyes of authorities. Ref. National Electric Code 90.7, 110.2, 110.3(B) and (C). Just looking out for a brother.
Beautiful design!
Just noticed your t shirt! Now I know I'm watching the right videos!
Hey thanks a lot for making this video. The fence on my piece of junk ryobi job site saw is driving me nuts lol. I guess I know what I’m making next when I’m done building your bar clamps. So thank you, grazie, gracias, and danke schöne my friend.
Nice job John.👍👍
Just incredible.
Genius work.
As usual, great design! I'm putting this one on my to-do for winter!
Amazing as usual.
WAIT!!! he used regular wood glue? Not construction adhesive? Invasion of the Body Snatchers is REAL!!! We now have PROOF!! LOLOLOOOLOLOLOLOLOLOL cool piece, been thinking of doing something similiar to my old Craftsman saw from the 90's that the stuck fence wont stay square to the table, it always rolls out at the back, think the square tube is actually bent!.
Its summer time in North America.
Nicely done
amazing as always
I was on the fence about your last version, but this one looks much easier to make, and it will make my vintage Sears table saw much better. Thanks for the great plans, and incredible value on your sale price. Love all of your projects and your twists on solving problems.
"on the fence..." I get it :)
Great video I like the intense music at the end lol wish I would have seen this before I bought my fence last month lol oh well great build
Very Good!!!
well done!
Nice work, maybe a round over on the cam handle to make it more comfortable?
Buy the plans, build it and make that happen.
This is great! Thank you.
Absolutely AWESOME as always. Thank you form sharing. 👍👌
Good job mr: heiz
How about making a thickness planer
Great video!
Cool build!
Well done!
John, you mention that you made a jig to mount the rail but you did not mention in the video, or the article regarding the build nor in the plans what hgt the rail needs to be mounted at in relationship to the table saw top. Also part A (rail face that mounts to table) you not it to be 2-1/4 tall but you are mounting yours under the overhang of your table top. I figured this out only after I cut the piece per your directions. My table top is flush with the table edge.
Building it right now and running into this.
What height did you make yours?
I can't give an exact measurement because plywood varies in thickness. When the fence rail is mounted at the right height, there will be a small gap between the fence and the top of the table saw. Use the fence itself to help install the rail at the right height and adjust as needed.
@@JohnHeisz thanks John for the quick reply
Absolutely amazing!
Excellent video ! And the t-shirt RUSH 2112 i like ;)
Bravo Maestro!👏👏👏
You sound a lot like 'Chef John' Mitzewich, pretty wild !!
DUDE! Love the shirt!!
Well, La De Da! A metal pointer.
Hi. Very nice. I was wandering why you opted for a flat bar to lock the back rather than a round pin which would be far more accurate and then add a thin steel or aluminium strip along the back edge of your table for contact?
Love the rush shirt
Always love the projects John. But have to say, I love the 2112 shirt. Awesome album.
00:13 perfect move
Great job. Nice and smart like always...
This was great thanks! :)
Could you do a video on your take of retractable casters for a workbench??
Bro your so freakin clever. I am gonna watch alot of your vids😊
Love the 2112 shirt!
METAL CLAMPS!
Where is John and what have you done with him?
I recycled some footage from the previous fence build three years ago, since I didn't need to rebuild the fence rail.
I am interested in the build of your table saw cabinet and top are videos and plans available?
About to build a new fence for my new home made table saw and again jumped on your channel since I've used your old design building a fence in the past. Now about this new design... Correct me if I'm missing something, but as I see it the threaded rod doesn't contribute at all clamping the back side of the fence configured this way. What I'm thinking is 2 nuts are needed, thightened 1 on each side of the metal plates (front side) and the threaded rod itself musn't be on the handle itself, but over the pivot point of the metal plates, which in this case is the screw that holds them to the fence. This said, the screw that holds the metal plates must be somewhere in the middle of them, not on the top. This way clamping down with the handle would pull the rod together with the metal plate on the back. Otherwise I really can't figure out how the rod is helping?
08:52 Just the tip lol 🤣
your skills are very good good job
Sorry for the amateur question here! I just got a drill press to complete this project and was wondering - what speed do you have your drill press for the 3 parts you use it for in the build: 1. drilling the countersunk holes in the birch plywood 2. drilling the holes in the steel plates 3. drilling the hole in the pivot pin?
Thanks again John for another brilliant design idea! Well done, Sir! Also, I notice you're using Robertson screws - yet another proud CANADIAN invention! (P.S.: LOVE the Rush t-shirt! The greatest band on Earth - still ANOTHER source of Canadian pride!)
Epic shirt!
Good job, good video 👍
FORMIDÁVEL SEU PROJETO ...SUPER INTERESSANTE ...JAÚ SP BRASIL
Would you make it similarly for a bandsaw?