Learn How to Convert Mesh to Solid in Fusion 360: th-cam.com/video/tVGtG-UjlYg/w-d-xo.html Repair STL mesh (Hobbyist license): th-cam.com/video/CeMHqa9Pxn8/w-d-xo.html
I liked and commented for the algorithm. Thank you for teaching me basically everything I know about 3d design and fusion 360. I’ve only make a few simple models so far, but it’s been immensely satisfying to print something I created.
Thank you! I just started using the free version of 3df Zephyr the other day... I managed to create and get a scan into Fusion and called that enough progress for the day... this definitely helps show me where to go next.
The scanner itself (hardware) is phenomenal for the price. The software is the only negative I've experienced. In general, it works okay...but I've had issues with the software not capturing things (same light in same condition) and it's just buggy/not the most intuitive.
I am following the tutorial and I figured out how to edit the sketch, thus having the "Sketch" tab at the top. I am in that mode but there is no "Fit Curves to Mesh Section". I am trying everything I can to get that to show up but can't. I also do not fully understand "... having a mesh selection in my sketch.". Could you illustrate how to make sure I have a mesh selection in my sketch. Thank you.
To back up a bit, when I click at the bottom left at 4:27 It is not the same for me. It does not create the "Sketch" menu at the top and rotate view. Instead nothing happens. The way that I got it to do that is by "S" and then Search for Create Sketch. This creates a Sketch with no MeshSection in it. I can go back to my "Sketch2" that has a "MeshSection2" mesh section in it but I still do not have "Fit Curves to Mesh Section" available. I can see it selected on the timeline below and I can select it in the tree but no "Fit Curves" ability. If I delete the new Sketch that has no Mesh Section in it and go to the on that dies, there is no more sketch menu. P.S. You say "Mesh Selection in your Sketch" I see there is a "Mesh Section" that is sub to my Sketch in the tree. Are these the same? Were you meaning to say "Section?" Please advise.
Ok I solved this whole issue by right clicking on the icon you hit at 4:27 and doing "Edit Sketch" on the right click menu - I think 4:27 was a bit jarring. I know very little about Fusion 360.
You forgot to model a carrot on the end of that pointer. Seriously, all the surface and mesh tools are new to me, is the F360 documentation a good place to start? Thanks for the video.
Hi there! This project was in partnership with the Makeable challenge. In short, schools around the country participate and print out their own custom assistive device unique to the individual they work with.
@Product Design Online hi, any idea why i am not getting the first pop up screen when using "insert mesh"? i want do chose my unit type but i never shows up.
Hey buddy Would you strongly recommend that I get the SHINING 3D scanner or I can still get good quality 3D scans using the KIRI ENGINE App on my phone? Is there a vast difference between the results of the two apparatus used (Kiri app vs Shining 3D Scanner) Thanks Gift 🤝
Learn How to Convert Mesh to Solid in Fusion 360: th-cam.com/video/tVGtG-UjlYg/w-d-xo.html
Repair STL mesh (Hobbyist license): th-cam.com/video/CeMHqa9Pxn8/w-d-xo.html
Will the 30 day course for beginners be updated?
@@xIsouLcruSHca yes. Day 12 will be out Friday.
@@ProductDesignOnline good to hear, thanks for the update.
I liked and commented for the algorithm. Thank you for teaching me basically everything I know about 3d design and fusion 360. I’ve only make a few simple models so far, but it’s been immensely satisfying to print something I created.
Thank you!
I never thought surface tab can be so useful
surface modeling can unlock some powerful workflows... I'll have to do more tutorials on it after I wrap up the 30 Days series :)
Thank you, I learned so much in this short video. wow
Thank you! I just started using the free version of 3df Zephyr the other day... I managed to create and get a scan into Fusion and called that enough progress for the day... this definitely helps show me where to go next.
Glad to hear that! Best of luck with the project ☺️
@@ProductDesignOnline Good afternoon, were you able to perform the 3D printing? the application is paid?. Thank you very much for your reply.
This channel is amazing!
Thx so much. Very cool
Great tutorial! How do you like the shining 3d scanner , i hear mixed reviews
The scanner itself (hardware) is phenomenal for the price. The software is the only negative I've experienced. In general, it works okay...but I've had issues with the software not capturing things (same light in same condition) and it's just buggy/not the most intuitive.
I am following the tutorial and I figured out how to edit the sketch, thus having the "Sketch" tab at the top. I am in that mode but there is no "Fit Curves to Mesh Section". I am trying everything I can to get that to show up but can't. I also do not fully understand "... having a mesh selection in my sketch.". Could you illustrate how to make sure I have a mesh selection in my sketch. Thank you.
To back up a bit, when I click at the bottom left at 4:27 It is not the same for me. It does not create the "Sketch" menu at the top and rotate view. Instead nothing happens. The way that I got it to do that is by "S" and then Search for Create Sketch. This creates a Sketch with no MeshSection in it. I can go back to my "Sketch2" that has a "MeshSection2" mesh section in it but I still do not have "Fit Curves to Mesh Section" available. I can see it selected on the timeline below and I can select it in the tree but no "Fit Curves" ability.
If I delete the new Sketch that has no Mesh Section in it and go to the on that dies, there is no more sketch menu.
P.S. You say "Mesh Selection in your Sketch" I see there is a "Mesh Section" that is sub to my Sketch in the tree. Are these the same? Were you meaning to say "Section?" Please advise.
Ok I solved this whole issue by right clicking on the icon you hit at 4:27 and doing "Edit Sketch" on the right click menu - I think 4:27 was a bit jarring. I know very little about Fusion 360.
You forgot to model a carrot on the end of that pointer. Seriously, all the surface and mesh tools are new to me, is the F360 documentation a good place to start? Thanks for the video.
Good afternoon, were you able to perform the 3D printing? the application is paid?. Thank you very much for your reply.
Hi there! This project was in partnership with the Makeable challenge. In short, schools around the country participate and print out their own custom assistive device unique to the individual they work with.
@Product Design Online
hi, any idea why i am not getting the first pop up screen when using "insert mesh"? i want do chose my unit type but i never shows up.
Hmm.. haven't heard of that before. What license type are you on? Also, what F360 version?
@@ProductDesignOnline I'm sorry ... My bad. I apparently collapsed the window to the side... Still new with fusion... Always used Siemens NX
@@tftg458 no problem! Glad you figured it out :)
Hey buddy
Would you strongly recommend that I get the SHINING 3D scanner or I can still get good quality 3D scans using the KIRI ENGINE App on my phone?
Is there a vast difference between the results of the two apparatus used (Kiri app vs Shining 3D Scanner)
Thanks
Gift 🤝
Really depends on the objects you're scanning and what you're looking to do with the scans. Do you have specific projects in mind?
for the algorithm