Thankyou for your research. I have just installed same set up in my 4WD. Fantastic. Rock solid. Running the wireless charging mag case for the iPhone. Does not move. 👍👍👍
I always liked the ram mount on my motorcycle. Maybe I’ll try something like this. I have a pile of amazon suction cup mounts on my bedroom floor right now too. Lol great video btw, thanks
Adam, you are a legend! I have been doing my head in trying to decide what mount to get for my D'max? And i absolutely love this idea! I cant wait to give this a crack! Thanks legend! 🙌🏼
Awesome video .... and the other Wireless charger one - super helpful. Is there anywhere that can be used around the centre facia area. Would prefer that if possible so not so intrusive on the forward vision and my wife can use the phone to set up maps etc whilst I'm driving? 👍
Yet to find a mount that work.. 99 % cannot bolt the mount like that but I appreciate your review it’s one of the most honest online .. because most mounts are shite 😀😀thanks buddy cheers from Ireland 🇮🇪
Can I just say, that was awesome. I have just created the same setup for my Landcruiser Sahara 200 series and it is rock solid. I also bought a setup for my mountain bike as well as the belt attachment. Thanks heaps for the hard work you did and saved me. Id been pulling my hair out for literally years.......
Super helpful for a sturdy mount that won't fail; have you been able to take a vibration-free video (on paved roads) with any of these? Have a great camera in iPhone 13 pro; want to take a 2 hour video of a scenic drive in a national park without filming the sequel to the Blair Witch Project. No one has been able to offer any suggestions. TiA!
I’m one of the million who have been driven mad by phone mounts…. Most days I’m off road and it’s either cumbersome, falls off or sun…. Had a cradle system that worked until my son broke it off. That worked well but, hey! It broke…..😿 Thanks for the channel. Great ingredients and insights.
This video covers most if not all the concerns for mounts. Unfortunately, there is no perfect mount and/or device. Personalized is the way to go with whatever the preference of the driver.
Don’t suppose you can monitor the transmission temp in the DMax? If so do you have the codes? I used to run the torque app but it isn’t available for the iPhone unfortunately.
I’m a quad lock owner and have had the same window mount issues. This video has solved an issue I haven’t got to yet (still waiting for my dmax) Awesome vid as usual
Cheers mate, yeah reckon the quadlock window was the most solid by far from what I found, just doesn't like the heat after about the 6 month mark it seems. Have basically came to conclusion mounted to the window using that sort of style could eventually suffer the same fate over time
Expected to be in town on the around the 17th, getting a couple of accessories fitted through the dealer so hope to have it by the 21st maybe 25th at the latest
Thanks for another great Video Adam. Does the phone in that position take up much of your windscreen vision? What is the gauges app you are running. I communicated with Scan Gauge back when I first got my new 2021 DMax (October 2020 actually) about EGT and Auto Trans temps but they had not resolved the gearboix temperature at that time. I need both for towing.
Nah, have it postioned so it just sits in behind the A piller. The app is called Torque Pro - if you check out the tow test vid there's a section that I go into detail about it. Basically you can get the everything inc the EGT but the auto temp (this PID hasn't been cracked as yet)
Dang you are correct - the length shown in the vid is the RAM B-201U! Apologies all, too many phone mount bits 😖 Links updated. At the end of the day there's a heap of different types of RAM arms, grab the one that suits your needs :)
Question! Does the Quad Lock 360 Dual Pivot arm work with the RAM 9mm Angled bolt head adapter ball base and then the Quadlock Dual pivot arm ball replacement to then add the wireless charger on? Both the RAM and the Quadlock balls are 1” however noticed in your video you didn’t end up using your Quadlock Pivot Arm? Cheers!
Hah, In Perth. Those magnet to metal ball worked best but it got so hot it would overheat the phone when I first mounted it each day on the way home in the arvo. Window suction cups just turned hard and yellow pretty quick in the summer. I shall try your setup in my Hilux.
Watching this video because Im looking for the best phone mount that will hold my phone while racing, er i mean during track sessions. Thanks man! I ended up with something different cause my car from 2013 didn’t exactly plan for people using phones instead of the obsolete gps built into the dash 😅
Great idea Adam, im going to make one up, thanks for all your research great work brother... always looking forward to the next video... 🤙VSMH is my favourite channel 😁
Now upgrade from the standard Quadlock charge head to the magnetic charge head and you will have to update your case too. This combo will give you a teepee in your pants 🤣.
Pretty good idea! You really can’t get any better than something that’s screwed in place. Those suction cups always have some wiggle to them and bounce around on rough terrain every time! I found a great bracket that hooks to the rod on the back of my mirror that holds my radar detector. Was hoping to find something like it that would work for my iPhone, but haven’t had any luck yet. Never considered trying to find different parts and Mickey Mouse them together to hold my iPhone. But that just might be the way to go? I’m going to see what I can come up with? As they say, if there’s a will there’s a way!
Hey mate, I stumbled across your site and think your content is on the money. Great even if I have the twin version of your DMax. I've got the BT-50, albeit 4x2 as I don't expect to get off road. One of the things that is a little frustrating is that we need to plug in via USB to access Android Auto. I noticed that you had a cable running to the phone is a there a procedure to conceal the cable?
I was just checking out your dash cam install, I’ve used Quadlock for a few years but I was curious how you set yours up…sure enough you video showed up thanks adam
G’day Adam, are you able to move the phone so it sits inline with the pillar? I’d like to mount it like you have but not block the windscreen. Cheers James
@@Jiggssy yeah it's all adjustable so can move to where you want. Can get different lengths of the ram arms as well so can really customise to any position you want really
Hi there, New to your channel, fantastic information. Could you tell me the app youre using for your car info please? I have a ScanGauge ii but what you have looks so much better !
@@VideoShowMeHow yeah, thank you, I saw that, but my Pajero central unit doesn't support wireless Android auto, unfortunately, so I have to plug in a wire anyway.
This was the best and most informative car phone holder review I've watched. GREAT Job 👍. I have spent close to $200 on holders that are now landfill residents. Most of them were given positive reviews on YT but as soon as you poo pooed the vent and suction cup holders I knew you were legit. Most of mine have been vent holders and none of them work, I have 1 now that's flopping around right now. Thanks for the honest review.
Is it still holding up I love my quad lock but I got the suction cup one after a year it won’t stick anymore fell off 5 times past couple weeks I need a alternative like your set up
Yeah this is going great, I had the same unfortunately, went through 2 window mounts from quad and a various ram but always the same result. Hard mount is 10000% the way to go imo
@@VideoShowMeHow awesome I think most suction cup mount are junk they end up falling off like you said I’m going order the parts do the same deal for sure thanks for getting back to me on it
@@VideoShowMeHow oh yea it worked awesome for a while my car is lowered it’s a bumpy ride it never came off the mount unless I took it off I saw ur video so I can keep using my quadlock case I like it so much
Thanks, Adam. Great idea just fitted mine to the new model MUX in the same position. RAM & Quadlock should be paying you a commission for the number of fittings they must have sold due to your video. Cheers
Otterbox / RAM make some tablet specific cases that you can put RAM ball mounts on. I've got one on a Samsung Tab A8 that works really well (have to remount it in my new D-Max)
Nice! This is how DIY reviews/maker videos should be done. You've got me, boss. Can't wait to see the other vids in your library. This cell phone one is, by far, the best video I have seen on cell phone mounts. Have been through all the typical options that you mention. The sun is a killer. Can't wait to apply what you have shown! Excellent!
I've got a windscreen mount, been working solidly for the past 2+ years. I think the trick was the plastic/rubber melted to the windscreen and now it's a permanent fixture 🤣🤣😅
Great set up just you now have a huge blind spot with the mirror and pilar as well? I have the same but with a windscreen mount when I secured it to the windscreen I put a covering of clear silicon on the suction cap been on for 2 years and has not come off same with my previous car on for 5 years.
@@VideoShowMeHow I think different enough. 3mm here, 1mm there and probably different camera/fingerprint holes. I love the non windscreen mount option you've come up with, so might try a complete Ram solution. Do you know if the Ram X holder is even worth the compromise?
@@kthomo079 yeah I ran it on the jeep for a couple years works well. Only downside it's it's a solid two hand gig to attach 😃 First world problems I know but hey lol
There's a few brands that can stick to a surface, quad lock etc. I've just found if it sits in the sun it eventually fails hence working out this combo
@VideoShowMeHow thank you for your reply. I liked the way u placed the phone holder. mine is a small suv and it doesn't have the grab handle that's the problem.
The ball size is frustratingly different so some things don't work.. if quad lock bought out the base ball screw mount you could potentially use a quadlock arm and then wireless charger 👍
@@VideoShowMeHow Thanks mate. Sorry for been a pain. Did look, eBay link was dead, amazon showed a not available message. Was hoping that a current product was around. Would a OBDlink MX+ do the same job?
You don't :( I've tried a heap of different fittings but unfortunately the ball isn't the standard inch size, theirs is a proprietary smaller size so is incompatible.. if Quadlock bring out the screw Ball mount however we're set..
![Best rugged 4wd dash mounting solutions for Phone and Tablet - Seasucker | Arkon | Ram Mount [2021]](http://i.ytimg.com/vi/eV2u9qM6uAY/mqdefault.jpg)
UPDATED WIRELESS VERSION!! th-cam.com/video/Aw9oze2iwp4/w-d-xo.html
Thankyou for your research. I have just installed same set up in my 4WD. Fantastic. Rock solid. Running the wireless charging mag case for the iPhone. Does not move. 👍👍👍
Works well hey!
I always liked the ram mount on my motorcycle. Maybe I’ll try something like this. I have a pile of amazon suction cup mounts on my bedroom floor right now too. Lol great video btw, thanks
What ia the name of this I want to get one for my car
OK i fine the page for it
I know you did a quad phone holder . How about a holder for the hema gps unit , maybe near middle of dash top ?
Adam, you are a legend! I have been doing my head in trying to decide what mount to get for my D'max? And i absolutely love this idea! I cant wait to give this a crack! Thanks legend! 🙌🏼
Checkout the updated vid as well - wireless :)
Awesome video .... and the other Wireless charger one - super helpful. Is there anywhere that can be used around the centre facia area. Would prefer that if possible so not so intrusive on the forward vision and my wife can use the phone to set up maps etc whilst I'm driving? 👍
Nothing that's I've found unfortunately (that's reversible anyway)
Just purchased this whole set up, be good to have something that is stable!
Noice, stable it is 👌
Thanks for help on a few things! Your videos are great.
Thanks mate!!
Parts ordered! Thank you so much for this
👍👍
Fantastic video! I'm curious, as a Canadian, what kind of truck is that? I don't recognise it as a model sold here.
That's an Isuzu Dmax X-Terrain 👍
@@VideoShowMeHow Thanks m8!
Yet to find a mount that work.. 99 % cannot bolt the mount like that but I appreciate your review it’s one of the most honest online .. because most mounts are shite 😀😀thanks buddy cheers from Ireland 🇮🇪
@@dieselman7453 Cheers 👍
Can I just say, that was awesome. I have just created the same setup for my Landcruiser Sahara 200 series and it is rock solid. I also bought a setup for my mountain bike as well as the belt attachment. Thanks heaps for the hard work you did and saved me. Id been pulling my hair out for literally years.......
I feel yah! Have been the same lol
Well done Adam
Your a gun , keep up the great work your doing, another great idea I need doing.
Cheers 🍻
Cheers bud 👍
Super helpful for a sturdy mount that won't fail; have you been able to take a vibration-free video (on paved roads) with any of these? Have a great camera in iPhone 13 pro; want to take a 2 hour video of a scenic drive in a national park without filming the sequel to the Blair Witch Project. No one has been able to offer any suggestions. TiA!
Yeah the mount is rock solid, I used the passenger side one to mount my GoPro for filming, is excellent
thanks for the video my new work car is a hilux
Great content concise well presented got you a well earned like & a sub thank you. Only 1 question why the gloves & bear feet ? 😄
Gloves 🧤 just a bit of thing here ;) Also must have forgot the safety thongs that day 😁
I’m one of the million who have been driven mad by phone mounts….
Most days I’m off road and it’s either cumbersome, falls off or sun….
Had a cradle system that worked until my son broke it off. That worked well but, hey! It broke…..😿
Thanks for the channel. Great ingredients and insights.
Shhhh crow filmin here!
😁🦅
I don't like the quad lock cases, they are pretty average. I use the bury QI wireless charger holder. ive found it the best.
This video covers most if not all the concerns for mounts. Unfortunately, there is no perfect mount and/or device. Personalized is the way to go with whatever the preference of the driver.
Don’t suppose you can monitor the transmission temp in the DMax? If so do you have the codes? I used to run the torque app but it isn’t available for the iPhone unfortunately.
No, unfortunately I haven't been able to find the codes for the 20+ dmax :(
Thank you!!
Recently looking at Ulanzi R094, which is designed to clamp DSLR on any handle, maybe something worth to look into.
Well done mate 👍🏻 New sub here Cheers from the Westside 🇦🇺
I’m a quad lock owner and have had the same window mount issues. This video has solved an issue I haven’t got to yet (still waiting for my dmax)
Awesome vid as usual
Cheers mate, yeah reckon the quadlock window was the most solid by far from what I found, just doesn't like the heat after about the 6 month mark it seems. Have basically came to conclusion mounted to the window using that sort of style could eventually suffer the same fate over time
Where have you run the charge cable? Power source for it? You haven't just drooped it across the steering column have you? 😱
Maaaayyybbbeeee 😁 (am on Android Auto so I need a cable)
Just order this kit with the wireless charger set up. Thanks for all you effort you put into in this vid!
How is the mount going? Is it still going strong?
Yeah perfect 👍 So good I installed the same on the passenger side 😁
Sweet, good to hear. I'm getting everything ready for my maxie
@@jesserose4017 far off?
Expected to be in town on the around the 17th, getting a couple of accessories fitted through the dealer so hope to have it by the 21st maybe 25th at the latest
@@jesserose4017 not long now!
Thanks for another great Video Adam. Does the phone in that position take up much of your windscreen vision?
What is the gauges app you are running. I communicated with Scan Gauge back when I first got my new 2021 DMax (October 2020 actually) about EGT and Auto Trans temps but they had not resolved the gearboix temperature at that time. I need both for towing.
Nah, have it postioned so it just sits in behind the A piller. The app is called Torque Pro - if you check out the tow test vid there's a section that I go into detail about it. Basically you can get the everything inc the EGT but the auto temp (this PID hasn't been cracked as yet)
Was waiting for this my whole (car) life. Thaaanks
Appreciate the video.
I have an mux 2022, guessing this would work.
I am currently using the MagSafe version, can this be attached to the ball system?
Bloody awesome video. Guessing my MUX will be the same as your DMAX with the fuses. So keen! Going to order these goodies for sure! 🤩
Hey mate, it's Gaz from down the street at Little Owls Family Day Care... just bought some gear of Quad Lock!
Are you sure that’s the RAM-B-201U-A ? It looks longer like the RAM-B-201U
Dang you are correct - the length shown in the vid is the RAM B-201U! Apologies all, too many phone mount bits 😖 Links updated. At the end of the day there's a heap of different types of RAM arms, grab the one that suits your needs :)
That set up is the go. But I personally would have it to right abit as so it doesn't create a blind spot
Yeah can get different lengths of the mid piece etc so you can put where you want :)
Question! Does the Quad Lock 360 Dual Pivot arm work with the RAM 9mm Angled bolt head adapter ball base and then the Quadlock Dual pivot arm ball replacement to then add the wireless charger on? Both the RAM and the Quadlock balls are 1” however noticed in your video you didn’t end up using your Quadlock Pivot Arm? Cheers!
Yeah the 360 arm uses a 22mm ball (7/8") so slightly different sizes
Hah, In Perth. Those magnet to metal ball worked best but it got so hot it would overheat the phone when I first mounted it each day on the way home in the arvo. Window suction cups just turned hard and yellow pretty quick in the summer. I shall try your setup in my Hilux.
Yeah prob similar to hot Qld summers, this has been the best setup I've found 👍👍
Watching this video because Im looking for the best phone mount that will hold my phone while racing, er i mean during track sessions. Thanks man! I ended up with something different cause my car from 2013 didn’t exactly plan for people using phones instead of the obsolete gps built into the dash 😅
Because racecar? 😉
Great idea Adam, im going to make one up, thanks for all your research great work brother... always looking forward to the next video... 🤙VSMH is my favourite channel 😁
Cheers bud! You'll love the next couple, some chunky dmax vids up next 👌
@@VideoShowMeHow can't wait, looking forward to it. I get mine finally at the start of Jan the first of the My22 model can't wait. Soo excited 😁
@@ahmad6453 oh nice! You get all the little up grades as well 👍👍
Have you figured out a wireless charging option?
Sure have, V2 of this out soon! (Wireless charging head, USB charge ports at switch panel)
@@VideoShowMeHow Awesome! how soon?
Next week or so 👍
@@VideoShowMeHow cool! Also, I’ve got a golf 2013 and there isn’t any screw in points. Know any solutions for that?
Great video. Subscribed. Thank you!
You have rubber gloves on, but no shoes or socks. Please explain.
Thanks for the great coverage. But let me ask you how much is the total cost of this mount when it's all said and done?
Around $100. Bit more for the wireless version (new updated video on the channel now)
Please test with small breaks, the mobile should not come out falling, this is the real test.
I had my phone there for 7000km on the Cape York trip including doing all of the Old Telegraph Track if that counts? Still rock solid :)
@@VideoShowMeHow Really that works, thanks for the response. I was not expecting your response😁😁.
Thanks for your research. this looks the best I've seen so far.
Now upgrade from the standard Quadlock charge head to the magnetic charge head and you will have to update your case too. This combo will give you a teepee in your pants 🤣.
Android 🤘
Hey mate!! My car doesnt have that screw arrangement to
Start with part 1. Any ideas ? Thanks
Hmmm hunt around see if you can find another point somewhere, the screw hardpoint is key to the mount unfortunately
Pretty good idea! You really can’t get any better than something that’s screwed in place. Those suction cups always have some wiggle to them and bounce around on rough terrain every time!
I found a great bracket that hooks to the rod on the back of my mirror that holds my radar detector.
Was hoping to find something like it that would work for my iPhone, but haven’t had any luck yet. Never considered trying to find different parts and Mickey Mouse them together to hold my iPhone. But that just might be the way to go? I’m going to see what I can come up with? As they say, if there’s a will there’s a way!
Solid as a rock 👌 Check out the update vid for a wireless charging option
Hey mate, I stumbled across your site and think your content is on the money. Great even if I have the twin version of your DMax. I've got the BT-50, albeit 4x2 as I don't expect to get off road.
One of the things that is a little frustrating is that we need to plug in via USB to access Android Auto. I noticed that you had a cable running to the phone is a there a procedure to conceal the cable?
Hi mate, can somewhat tuck into the steering column but yeah wireless android auto would be great. You can get modules now that enable it
I was just checking out your dash cam install, I’ve used Quadlock for a few years but I was curious how you set yours up…sure enough you video showed up thanks adam
👍👍
G’day Adam, are you able to move the phone so it sits inline with the pillar? I’d like to mount it like you have but not block the windscreen. Cheers James
@@Jiggssy yeah it's all adjustable so can move to where you want. Can get different lengths of the ram arms as well so can really customise to any position you want really
@@VideoShowMeHow beauty, thanks mate
Thanks for all your videos mate it’s awesome, I just replaced the blue head with wireless head charger, no more cable in the way 😅
Have an update vid on the way with exactly that 😂
this is friggin amazing video. finally
Hi there, New to your channel, fantastic information. Could you tell me the app youre using for your car info please? I have a ScanGauge ii but what you have looks so much better !
It's called Torque Pro :)
@@VideoShowMeHow thank you 😊
Installed it on my Mitsubishi Pajero (had to take the driver side handle off completely), and I'm loving it! Solid as. Thank you!
Nice! There's a new wireless version too, vid on the channel
@@VideoShowMeHow yeah, thank you, I saw that, but my Pajero central unit doesn't support wireless Android auto, unfortunately, so I have to plug in a wire anyway.
This is cracking, might need tk upgrade to a wireless android auto unit so i can steal this
Wireless charge version of this is possible too .. checkout the updated vid
Really enjoyed the video and your others (I've got the 2022 MUX). Just ordered nearly the same unit, just used Quad Locks arm, see how it goes :)
Cheers mate 👌
Definitely going to do this did you need to get a longer bolt for the bottom of the handle for the dmax? or did the factory one still work?
Factory bolt worked a treat. Made for it 😁
Did you snap off the plastic tab cover
Yeah may have got a little too excited.. they do just fold back though so can always leave attached to reclip later in need
I don’t really want to snap mine off but it looks dumb with it there
This was the best and most informative car phone holder review I've watched. GREAT Job 👍. I have spent close to $200 on holders that are now landfill residents. Most of them were given positive reviews on YT but as soon as you poo pooed the vent and suction cup holders I knew you were legit. Most of mine have been vent holders and none of them work, I have 1 now that's flopping around right now. Thanks for the honest review.
Nice work mate, thanks for that. Cheers
PERFECT! thankyou for satisfying my OCD this is great!
lol kindred spirt :D
Great video as always, I’ll be looking into this mount. (Love the little comments about the crow lol)
The bugger of a thing, gave up in the end lol
It's just a bad position for road visibility and for not losing pedestrians in the A pillar blind spot.
Nah, have it adjusted down more, just had it there for filming the vid 👍 Suits in line with the a pillar usually
@@VideoShowMeHow it better be, or else. LOL 😆 🤣 😂 😹
Is it still holding up I love my quad lock but I got the suction cup one after a year it won’t stick anymore fell off 5 times past couple weeks I need a alternative like your set up
Yeah this is going great, I had the same unfortunately, went through 2 window mounts from quad and a various ram but always the same result. Hard mount is 10000% the way to go imo
@@VideoShowMeHow awesome I think most suction cup mount are junk they end up falling off like you said I’m going order the parts do the same deal for sure thanks for getting back to me on it
@@1790jman they are good for a while but I guess just the nature of them getting hammered by the sun all day is tricky
@@VideoShowMeHow oh yea it worked awesome for a while my car is lowered it’s a bumpy ride it never came off the mount unless I took it off I saw ur video so I can keep using my quadlock case I like it so much
Where do we buy one? Is there an Amazon link?
@@DayBowBow links in the vid description
Test comments Adam I put 2 comments and they seem to disappear .to VSMH .😅
?? Coming in loud and clear?
Unless there's links? (TH-cam doesn't let comments with links through, thinks they're spam)
Thanks, Adam. Great idea just fitted mine to the new model MUX in the same position. RAM & Quadlock should be paying you a commission for the number of fittings they must have sold due to your video. Cheers
You forget the best : Brodit
I run a ram mount always
Been happy with it
I'm currently looking for a idea to run a ipad in the car .
reckon you could do the same, just up the size of the ball, go to the B size with on of the tablet x grips?
Otterbox / RAM make some tablet specific cases that you can put RAM ball mounts on. I've got one on a Samsung Tab A8 that works really well (have to remount it in my new D-Max)
Mate you are like me, go through a hundred different options to find one that actually works, well done.
Awesome, I'm getting one
GENIUS
Done, works a treat👍👍
Solid hey 👌
Nice! This is how DIY reviews/maker videos should be done. You've got me, boss. Can't wait to see the other vids in your library. This cell phone one is, by far, the best video I have seen on cell phone mounts. Have been through all the typical options that you mention. The sun is a killer. Can't wait to apply what you have shown! Excellent!
🤘
I've got a windscreen mount, been working solidly for the past 2+ years. I think the trick was the plastic/rubber melted to the windscreen and now it's a permanent fixture 🤣🤣😅
Haha brilliant
Great set up just you now have a huge blind spot with the mirror and pilar as well? I have the same but with a windscreen mount when I secured it to the windscreen I put a covering of clear silicon on the suction cap been on for 2 years and has not come off same with my previous car on for 5 years.
Nah, have it down a bit lower than in the vid, sits behind the normal pillar visibility wise 👍
Good video but if you haven't got a bolt or screw to put the unit on your out of luck
What's the app you had on your phone at the start of your video please.
Torque Pro
@@VideoShowMeHow thank you.
Another great video Adam. Sadly no Quadlock case for the Google Pixel 4a (non 5G version) 😭.
Oh no really? I've got the pixel 4, are they a different size?
@@VideoShowMeHow I think different enough. 3mm here, 1mm there and probably different camera/fingerprint holes.
I love the non windscreen mount option you've come up with, so might try a complete Ram solution. Do you know if the Ram X holder is even worth the compromise?
@@kthomo079 yeah I ran it on the jeep for a couple years works well. Only downside it's it's a solid two hand gig to attach 😃 First world problems I know but hey lol
@@VideoShowMeHow cheers mate!
I have a 2010 Honda civic with a curved dashboard ( it is not flat). How do I mount cell phone holder on that curved surface ?
There's a few brands that can stick to a surface, quad lock etc. I've just found if it sits in the sun it eventually fails hence working out this combo
damm my car dosnt have a handle there haha
Bummer 🙂 Any other bolts you could rig to?
Genius!
Great video. Really well presented. Wondering how you are connecting up to android auto and what the app is that you are using. Cheers. Great stuff
Cheers mate. App is Torque Pro 👍
How do you get the motor details on your phone? Is that possible on hilux?
Uses an obd2 adapter and phone app torque pro - details in vid description 👍
You broke the tab holding the cover didn't you?
Hi I am new to following your videos. Where do I find the link showing the correct part numbers for the phone holder?
Checkout the description of the video, all the links are there 👍
could you pls tell me what that app is on your phone
Torque pro
@VideoShowMeHow thank you for your reply.
I liked the way u placed the phone holder. mine is a small suv and it doesn't have the grab handle that's the problem.
🤣🤣🤣
Gloves to touch phone mounts...
Bare feet on the garage floor!
Must have forgotten the usual safety pluggers!
Adam what are the dials on your phone.
Car scanner.. there's a vid re OBD SCANNING on the channel that explains it further
Thanks Adam found It. On the order list. That transmission temp app is a must.
Exactly what I was looking for thanks a lot
Next vid: tidy cable solution? 😁
Hi Adam, great idea there. Is it possible to use quad lock wireless charging head instead of the lever head you've installed there? Thanks
The ball size is frustratingly different so some things don't work.. if quad lock bought out the base ball screw mount you could potentially use a quadlock arm and then wireless charger 👍
👏👏👏
No landscape mode?
Yep the quadlock can do landscape also
Just a question regarding your OBD, what app do you use?
Torque Pro
Who really cares about “off road”? That makes up less than 1% of drivers!!!!!!
Welp 10 million drivers well like it then
Hey that's cool bud, I prefer my phone not to jiggle around offroad, onroad or anywhere in between :)
Brillant Idea!
Does the job 👌
Can someone (or Adam) please describe the Bluetooth module and app Adam was running on his phone for gauges please.
App is called torque pro and Bluetooth module is an obd2 reader - all linked in the video description 👍
@@VideoShowMeHow Thanks mate. Sorry for been a pain.
Did look, eBay link was dead, amazon showed a not available message.
Was hoping that a current product was around.
Would a OBDlink MX+ do the same job?
@@jeremyunderwood302 should do yep, will update this links cheers
Would be interesting to know if the phone mounted there fouls the curtain airbags that pop out of the A-pillar.
Deploys from the top 👌
spoke too soon! thanks.
Do you get it to work with the wireless charging system?
You don't :( I've tried a heap of different fittings but unfortunately the ball isn't the standard inch size, theirs is a proprietary smaller size so is incompatible.. if Quadlock bring out the screw Ball mount however we're set..