Bought this 7 years ago for 60€. Today i recognize that it can´t test a LED in Diode Mode. Because of only 2x AAA 1,5V Batteries and open circuit voltage of 1,5V as the manual states? My other cheap Voltcraft VC135 (with 9V Block Battery) will test it (LED glows), but can´t display the value over 2V because of 3,5 digit LCD 😠 I think it´s time for some UNI-T model now.
Hi hectorpascale: While you are correct the the EX330 is sufficient to test LED's - I don't think that most casual users of this type of Meter will be testing LED's - This Meter was chosen because it meets the requirements for most "weekend warriors" for the type of work shown on this channel - There are always more expensive choices for more specific tasks. The EX330 is hard to beat based on price and features - Chris
@@northsideservicecompany3567 Thank you! I saw another video on fluke meters and they show putting the meter on OHMS and one lead from amps to milliamps and if it zeroed out fuses were ok. O.L = bad fuses. I wasnt sure if this aplied to these metes.
@@northsideservicecompany3567 30 percent increase. My computer stuff is actually cheaper than 3 years ago, same with my cell phone plan etc. But the price was just a statement for reference not a question to be answered.
Hi Jess: Many times the colors and look of products have a lot to do with the manufacturers attempt to create a Trademarked look for their products - which helps protect them from cheap knockoff's. A good example are products made by Hakko - who adopted their current design look of bright blue and yellow. These colors are Trademarked and also easily identifiable - although this does not stop all knockoffs - it probably does help - Chris
@@jesscorbin5981 The display is a Liquid Crystal Display and because it's quit large - it captures the overhead lights and refracts the light into its different spectrums. You're exactly right - it's just like shining light through a prism. - Chris
My only complaint about this meter is that it auto powers off even when you are actively using it, taking measurements etc. beeps and powers off. Most annoying. Will be sure to avoid this in the next meter I purchase
Hi Christopher: On Page 11 in the Owner's Manual - With the Meter off, hold down MODE button while turning on. "APO d" will appear in the display. The Auto Power off will return the next time you power the Meter on. - Chris
@@northsideservicecompany3567 Thanks for responding- I did search for a solution to this annoyance and found the method you described. It has to be repeated every time you use the meter and if you forget to turn it off, the meter will run until batteries are drained. I will look for a meter that has a better power management system than this model, that senses measurements as active use. Great clear video and a good meter apart from the power off
Would you please share the dial switch copper positions with us ? mine has 6 copper contacts with 8 plastic positions, and somehow I messed them up, thanks
I Think you are referring to the selector wheel for the measurement ranges/options. I have opened my EX330 and it has 8 plastic "nubbies" to hold the 8 copper contacts. So here it´s 8+8! Oops, i nearly lost the 2 steel balls for the "clicky action"
Speaker resistance is not the same a speaker impedance. The impedance is a measure of reactance in ohms when a 1Khz sine wave is applied to the speaker under test. The ohm meter measurement is only the DC resistance of the speaker coil wire.
Hi GeekWireless: While your description is mostly technically correct - the average homeowner doesn't care and doesn't need to know the technical differences between impedance and resistance. Bogging people down in technical theory doesn't encourage them to use their tools to solve the problem at hand - it only confuses and frustrates them and the problem will not be resolved. Keeping it simple makes it easier for the average person to have the confidence to try - Chris
Hi Gaston: Thanks - Even after almost 2 years since I published this Video - the EX330 is still in the sweet spot for general use Multi-Meters for the occasional user - Chris
Hi Jimmy: I suppose you could go with "open line" for the OL symbol - I always think "over limit" as I said in the Video. Thank goodness that no one said "over load" in the Video - Chris
theuser manual doesn't define it, so what is OL to represent? you are the one who said it doesn't mean over load that make you responsible to inform the world what in means in this context.
![ILLSLICK - THE KING'S LANDING [Freestyle]](http://i.ytimg.com/vi/feIJJnNkTfk/mqdefault.jpg)
Bought this 7 years ago for 60€.
Today i recognize that it can´t test a LED in Diode Mode. Because of only 2x AAA 1,5V Batteries and open circuit voltage of 1,5V as the manual states?
My other cheap Voltcraft VC135 (with 9V Block Battery) will test it (LED glows), but can´t display the value over 2V because of 3,5 digit LCD 😠
I think it´s time for some UNI-T model now.
Hi hectorpascale: While you are correct the the EX330 is sufficient to test LED's - I don't think that most casual users of this type of Meter will be testing LED's - This Meter was chosen because it meets the requirements for most "weekend warriors" for the type of work shown on this channel - There are always more expensive choices for more specific tasks. The EX330 is hard to beat based on price and features - Chris
Hello, can you tell me how to check both fuses WITHOUT taking the meter apart to get at the fuses? Thank you
Hi Harry: If you're going to check the Fuses - you have to take the Meter apart - Chris
@@northsideservicecompany3567 Thank you! I saw another video on fluke meters and they show putting the meter on OHMS and one lead from amps to milliamps and if it zeroed out fuses were ok. O.L = bad fuses. I wasnt sure if this aplied to these metes.
Great practical use video and explanations. Thanks!
Hi murrij: Thanks - Chris
When switch is OFF the voltage appears at the switch. Its only detecting current, not voltage presence!
Hi clem: I am completely unclear on what you're referring to - Chris
6-17-2020 amazon jacked the price up due to demand from this video. Now the price is $59.99
Hi Bob: Considering that this Video is 3-1/2 years old - I don't think a $15.46 increase is out of line.. - Chris
@@northsideservicecompany3567 30 percent increase. My computer stuff is actually cheaper than 3 years ago, same with my cell phone plan etc. But the price was just a statement for reference not a question to be answered.
Thanks amigo
Hi Rogelio: You're welcome - Chris
That one has the pretty colors! How come others don't?
Hi Jess: Many times the colors and look of products have a lot to do with the manufacturers attempt to create a Trademarked look for their products - which helps protect them from cheap knockoff's. A good example are products made by Hakko - who adopted their current design look of bright blue and yellow. These colors are Trademarked and also easily identifiable - although this does not stop all knockoffs - it probably does help - Chris
@@northsideservicecompany3567 I just like how the screen looks on that one
The display screen looks like it acquired a film of something, giving it a prysmatic effect or appearance.
@@jesscorbin5981 The display is a Liquid Crystal Display and because it's quit large - it captures the overhead lights and refracts the light into its different spectrums. You're exactly right - it's just like shining light through a prism. - Chris
@@northsideservicecompany3567 Yes the LCD, haha thanks!
My only complaint about this meter is that it auto powers off even when you are actively using it, taking measurements etc. beeps and powers off. Most annoying. Will be sure to avoid this in the next meter I purchase
Hi Christopher: On Page 11 in the Owner's Manual - With the Meter off, hold down MODE button while turning on. "APO d" will appear in the display. The Auto Power off will return the next time you power the Meter on. - Chris
@@northsideservicecompany3567 Thanks for responding- I did search for a solution to this annoyance and found the method you described. It has to be repeated every time you use the meter and if you forget to turn it off, the meter will run until batteries are drained. I will look for a meter that has a better power management system than this model, that senses measurements as active use. Great clear video and a good meter apart from the power off
Would you please share the dial switch copper positions with us ? mine has 6 copper contacts with 8 plastic positions, and somehow I messed them up, thanks
Hi Sam: I have no idea what you're asking about - Please explain - Chris
I Think you are referring to the selector wheel for the measurement ranges/options.
I have opened my EX330 and it has 8 plastic "nubbies" to hold the 8 copper contacts. So here it´s 8+8!
Oops, i nearly lost the 2 steel balls for the "clicky action"
Speaker resistance is not the same a speaker impedance. The impedance is a measure of reactance in ohms when a 1Khz sine wave is applied to the speaker under test. The ohm meter measurement is only the DC resistance of the speaker coil wire.
Hi GeekWireless: While your description is mostly technically correct - the average homeowner doesn't care and doesn't need to know the technical differences between impedance and resistance. Bogging people down in technical theory doesn't encourage them to use their tools to solve the problem at hand - it only confuses and frustrates them and the problem will not be resolved. Keeping it simple makes it easier for the average person to have the confidence to try - Chris
Ok, I see your point too.
Thanks - Chris
Very informative video. Thanks!
Hi Gaston: Thanks - Even after almost 2 years since I published this Video - the EX330 is still in the sweet spot for general use Multi-Meters for the occasional user - Chris
Today Amazon is charging $56.40 US for the unit. Not sure if that's due to inflation, Trump Tariffs, or both
Hi waswestkan: Since the Video was from 3 years ago - I guess there would be some price increase. It's still a good meter for the money - Chris
Like the name fluke..... The guy who designed it considered it a fluke. Lol
Hi Tony: I've had my trusty Fluke Meter for decades - it never lets me down, although it's time for some new probes, casualties of field work - Chris
If it works, it's a fluke.
Ol is not over load, 😂😂
Hi Jimmy: I suppose you could go with "open line" for the OL symbol - I always think "over limit" as I said in the Video. Thank goodness that no one said "over load" in the Video - Chris
Unfortunately the use manual doesn't define"OL", I couldn't find it any way.Perhaps Over Limit", that would mean "over load' as well
theuser manual doesn't define it, so what is OL to represent? you are the one who said it doesn't mean over load that make you responsible to inform the world what in means in this context.
🤮
Hi Hardy: No idea what you're trying to say??? - Chris