I gave my daughter a brand new only used 4 times washer dryer. It sat in my trailer for 3 years so you know it is ready to go. WRONG!@@@ Your video saved the day. Easy fix. Thx a million
How I appreciate your help! In this day in age, where ppl cannot afford basics.., let alone big issues as this! Thank you for guidance, & expertise 🤙 I thank Almighty God for your kindness!
Thanks Scott! I just replaced the broken switch and it was a lot easier after watching your video. I managed to access the switch by just taking off the front panel so it was very quick. Not sure I would have been able to remove the front panel without your help.
Thanks Scott! My wash won’t spin or drain water, what would you recommend if the spin lights green and lid lock is red - there’s a very light hum like something isn’t working but nothing is spin? I did a board check and the water runs to fill. I’m trying to save money as I don’t have much to afford anyone to fix this myself. Thank you! Hopefully I have enough info for some idea
@@XxPeytonTurnerXx in my case I didn't realize the belt underneath the tab had fallen off. I replaced it a bunch of times with the same belt but apparently it was stretched out enough that I eventually bought a new one. Lmk if you need instructions on installing the new drive belt but I found that on YT as well.
Hi…we have the GE w/d combo like this one but, I think it might be a newer version. It doesn’t have just a spin cycle, it’s rinse and spin. It doesn’t spin. How do I fix this??? It’s also in a closet that is hard to get to anything behind or on the sides. It still locks and rinse and wash, but no spin. And I had sheets and bath mats in it…..still. It happened on friday. So…I would love to be able to finish this load……should I take out whats in it 1st??? And I hope you can help. It’s so hard to find help. Michelle
Hi Michelle, This video should help: ✨ GE Washer Won’t Spin -Blinking Lights - Easy FIX ✨ th-cam.com/video/eKWa1JUvMDs/w-d-xo.html I think it needs a new lid sensor. It can be replaced by taking off the front panel. Link in the description 😊
Having watched your video I'm pretty sure the lid switch is my problem, but I was wondering if there is a way to " bypass" the switch to confirm that's the problem ( also to finish the load that's stranded in my machine.
Scott, my washer will start to agitate or spin but quickly stops and flashes wash & lid lock lights. Ran diagnostic and We do get an error code which suggests motor block. We found motor wire chafing, yellow and white wires, repaired them, and the washer continues to have the same problem. The entire tub assembly was replaced only a year ago. It’s at our beach house so it’s not used that much. None of the rubber straps are connected and the tub seems to wildly wobble around when spin/agitate starts. Fills hot and cold, pumps and transmission engages fine in diagnostic mode. Thanks.
How did you simply just pull that modular connector out??! Mine seems tabbed in or something I don’t want to force it but it looks like you just squeeze and it comes out.
hi I have a model # GUD24ESMM1WW will only spin and makes a loud griding noise. I pulled the from panel off and looks like the mode shifter accuator is half way down grinding the clutch while the pulley is spinning. I put in a new accuator and now it only spins cause the clutch is always in the engaged position. The motor will spin until smoke starts coming out of the motor. Still no agitation or water filling? Any idea of what is the problem? Thanks
@@ScottTheFixItGuyChannel without taking the front panel off (I don't trust myself to do it correctly... Lol) I feel like epithet the tachometer is the problem or the drum itself also seems waaaay too loose. But it also seems from all my different trials and tests that the middle thing that does the agitating, might be locked up. But I can't open the lid to watch it bc it stops. Obviously. Lol 😂
Hi Colleen, Can you use this link to contact me: ablink.send.calendly.com/ls/click?upn=c5OwkUgJwe619-2FtJe2HuacglIQLbL8EUe92fUnqxty-2FHSQe7Jf-2F49kEByk-2BchDop4WZZ_xlyFFp16rEtvay2aNXlBIXpJI78zb6mmRSgulVfp0vejHpT-2Bar2X4UtyvLr9mZdaEAv-2F5u-2BGqvr-2FPp5bN-2Fvl2v-2BpSuFY6E7i62iPFcH6-2Fdx3AuTtb6eWb0OyuQkWSYf38bd-2B5xgyOTVXLbqmzLO7Q937WQMLem-2FrEGuOLM-2Fc6iZjxujwJEBXEM3kiublPzdUEQX5I33HfAalR9owqi-2Fw1t8o2IZ9pgM9yMnHs9ALWocKUlFGwFNEoBQy-2B7-2FogLGrcQBMRsSL6HKOAiueF5djW2OWlmG8wSaHeu9ibrR9uJXuixY7WpH-2B6rjYRg6iLiDeZ2UYeCvcYZZJe3X4UlBccCnTc8KJkBqtd0BhQwmAPIQm8S1eb48Rh2RdJxMHig-2B0K1f33HwhPYqyQcqDTgEbFkVQ-2FsfHbAVKac3a-2FwkP5cWHPgaUoDChepQFSdVzSZO4tMzMDXz9-2FEcC2myFBC80XMtleUAkMq1zguNRYVBm0WhvOEFur-2FFJq6uxXF4vsDG3G5Q-2FwL5sp1PGUcWDfq4mcah3FfqbIYzlc6-2FbuODVrl15RG4ytmmLCI8-2BRLHN9uQx7-2BG0uoMer1NFSQcb4BOdEJ-2BX-2B8BUW-2BMABPXbUsuCpcuoAWA5RV8aGpdLQBHrmBn2fraD8gPi-2BdHrPZnFaiX4iORUIUG-2BuivYCdcrXMrOqGkBmIFkIsaIHK-2FqRCzeMTkkL1ds5koDfAhKQ8ESYMR8xIGSDf4JunWAp3SA02sf5OY-3D
Hey Scott! My washer is making a clicking noise and won’t spin. It fills and drains but won’t spin. Could this still be a lid lock problem? If not what do you think?
The two wires that are flowing from the lid lock to the "magnetic" part are maroon and yellowgold...these are the two that were severed. Can spin cycle work without this connection?
Hi Colleen, Great question. I would not try to use the spin cycle without that. I would just buy a new one from Amazon and splice it into the old wires and it will work good again. Usually those wires get ripped due to the washing machine being overloaded where it bounces around too much and rips the wires.
@@ScottTheFixItGuyChannel I appreciate the reply. Yeah I ordered the part on eBay yesterday. Im hoping that's the problem. If not I'll have my landlord get it fixed. I just don't like to wait around for people if it's something I can do myself in 10 minutes
@@ScottTheFixItGuyChannelthat would include the entire wiring system with magnet? ...the wires go through the entire covered tubing to the circuit board.
@@ScottTheFixItGuyChannel thank you...the wires are multiple, very fine wires and not enough coming out of "magnetic" strip. However it got severed, they severed it right near the magnetic strip.
I gave my daughter a brand new only used 4 times washer dryer. It sat in my trailer for 3 years so you know it is ready to go. WRONG!@@@ Your video saved the day. Easy fix. Thx a million
Great News, thank you 😀
How I appreciate
your help!
In this day in age,
where ppl cannot
afford basics..,
let alone big issues
as this!
Thank you for guidance,
& expertise 🤙
I thank Almighty God
for your kindness!
Thanks so Much Angel, praise God😊🙏
Thanks Scott! I was able to fix this without having to call the repair man. Keep up the great content
Thanks so Much Matthew😊👍
Hi Scott what is the model number of this washer and dryer I need to replace tub ring cos one of those suspension rubber support broken thank you
Thanks Scott! I just replaced the broken switch and it was a lot easier after watching your video. I managed to access the switch by just taking off the front panel so it was very quick. Not sure I would have been able to remove the front panel without your help.
Very cool👍
Scott how do I remove the push button switch and control board you are demo?
You can remove the panel right above the washer and then remove the screws holding on the control panel to get to the start button.
Thanks Scott! My wash won’t spin or drain water, what would you recommend if the spin lights green and lid lock is red - there’s a very light hum like something isn’t working but nothing is spin? I did a board check and the water runs to fill. I’m trying to save money as I don’t have much to afford anyone to fix this myself. Thank you! Hopefully I have enough info for some idea
Thanks Austyn,
Can you send the same question to my email at scottthefixitguy@yahoo.com along with the model number for your GE washing machine?
@@ScottTheFixItGuyChannel Emailed you just now, hope you don't mind. Similar issue.
@@FrankUrsino how did you fix it? I have the same issue.
@@XxPeytonTurnerXx in my case I didn't realize the belt underneath the tab had fallen off. I replaced it a bunch of times with the same belt but apparently it was stretched out enough that I eventually bought a new one. Lmk if you need instructions on installing the new drive belt but I found that on YT as well.
Hi…we have the GE w/d combo like this one but, I think it might be a newer version. It doesn’t have just a spin cycle, it’s rinse and spin. It doesn’t spin. How do I fix this??? It’s also in a closet that is hard to get to anything behind or on the sides. It still locks and rinse and wash, but no spin. And I had sheets and bath mats in it…..still. It happened on friday. So…I would love to be able to finish this load……should I take out whats in it 1st??? And I hope you can help. It’s so hard to find help. Michelle
Hi Michelle,
This video should help: ✨ GE Washer Won’t Spin -Blinking Lights - Easy FIX ✨
th-cam.com/video/eKWa1JUvMDs/w-d-xo.html
I think it needs a new lid sensor.
It can be replaced by taking off the front panel.
Link in the description 😊
Having watched your video I'm pretty sure the lid switch is my problem, but I was wondering if there is a way to " bypass" the switch to confirm that's the problem ( also to finish the load that's stranded in my machine.
Scott, my washer will start to agitate or spin but quickly stops and flashes wash & lid lock lights. Ran diagnostic and We do get an error code which suggests motor block. We found motor wire chafing, yellow and white wires, repaired them, and the washer continues to have the same problem. The entire tub assembly was replaced only a year ago. It’s at our beach house so it’s not used that much. None of the rubber straps are connected and the tub seems to wildly wobble around when spin/agitate starts. Fills hot and cold, pumps and transmission engages fine in diagnostic mode. Thanks.
Thanks John,
I would replace those straps and order the new motor speed sensor👍
Dear Scott - I think wires connecting to the magnetic lid lock were severed; can these be replaced or can the unit work without out this connection?
How did you simply just pull that modular connector out??! Mine seems tabbed in or something I don’t want to force it but it looks like you just squeeze and it comes out.
Give it a little help with a small flathead screwdriver to wedge the 2 halves apart.
Great video can you share the part # for switch
thank you👍
hello, could you please tell me how to acces the rear suspension rods on a stackable
Great Question Mark👍 Click Here to Get Live Expert Help From Me For Just $5.00: th-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Do have a video showing how to replace the agitator?
hi I have a model # GUD24ESMM1WW will only spin and makes a loud griding noise. I pulled the from panel off and looks like the mode shifter accuator is half way down grinding the clutch while the pulley is spinning. I put in a new accuator and now it only spins cause the clutch is always in the engaged position. The motor will spin until smoke starts coming out of the motor. Still no agitation or water filling? Any idea of what is the problem?
Thanks
Hi Michael,
I think you need to run the reset procedure for the GE washer laundry center so the controller can link up with the new shift actuator.
If the lid lock light comes on does that mean that it's for sure working and that's not the problem?
Good question,
The lid lock can still be the problem.
@@ScottTheFixItGuyChannel without taking the front panel off (I don't trust myself to do it correctly... Lol) I feel like epithet the tachometer is the problem or the drum itself also seems waaaay too loose. But it also seems from all my different trials and tests that the middle thing that does the agitating, might be locked up. But I can't open the lid to watch it bc it stops. Obviously. Lol 😂
Great info 👍 👌
how do you know if the lid switch is the issue to begin with?
Can I buy just a lid switch since the lid lock was already replaced. Is it the lid switch that actually causes the lid to lock?
Amazon has the lid switches.
Hi Colleen,
Can you use this link to contact me: ablink.send.calendly.com/ls/click?upn=c5OwkUgJwe619-2FtJe2HuacglIQLbL8EUe92fUnqxty-2FHSQe7Jf-2F49kEByk-2BchDop4WZZ_xlyFFp16rEtvay2aNXlBIXpJI78zb6mmRSgulVfp0vejHpT-2Bar2X4UtyvLr9mZdaEAv-2F5u-2BGqvr-2FPp5bN-2Fvl2v-2BpSuFY6E7i62iPFcH6-2Fdx3AuTtb6eWb0OyuQkWSYf38bd-2B5xgyOTVXLbqmzLO7Q937WQMLem-2FrEGuOLM-2Fc6iZjxujwJEBXEM3kiublPzdUEQX5I33HfAalR9owqi-2Fw1t8o2IZ9pgM9yMnHs9ALWocKUlFGwFNEoBQy-2B7-2FogLGrcQBMRsSL6HKOAiueF5djW2OWlmG8wSaHeu9ibrR9uJXuixY7WpH-2B6rjYRg6iLiDeZ2UYeCvcYZZJe3X4UlBccCnTc8KJkBqtd0BhQwmAPIQm8S1eb48Rh2RdJxMHig-2B0K1f33HwhPYqyQcqDTgEbFkVQ-2FsfHbAVKac3a-2FwkP5cWHPgaUoDChepQFSdVzSZO4tMzMDXz9-2FEcC2myFBC80XMtleUAkMq1zguNRYVBm0WhvOEFur-2FFJq6uxXF4vsDG3G5Q-2FwL5sp1PGUcWDfq4mcah3FfqbIYzlc6-2FbuODVrl15RG4ytmmLCI8-2BRLHN9uQx7-2BG0uoMer1NFSQcb4BOdEJ-2BX-2B8BUW-2BMABPXbUsuCpcuoAWA5RV8aGpdLQBHrmBn2fraD8gPi-2BdHrPZnFaiX4iORUIUG-2BuivYCdcrXMrOqGkBmIFkIsaIHK-2FqRCzeMTkkL1ds5koDfAhKQ8ESYMR8xIGSDf4JunWAp3SA02sf5OY-3D
Hey Scott! My washer is making a clicking noise and won’t spin. It fills and drains but won’t spin. Could this still be a lid lock problem? If not what do you think?
The two wires that are flowing from the lid lock to the "magnetic" part are maroon and yellowgold...these are the two that were severed. Can spin cycle work without this connection?
Hi Colleen,
Great question.
I would not try to use the spin cycle without that.
I would just buy a new one from Amazon and splice it into the old wires and it will work good again.
Usually those wires get ripped due to the washing machine being overloaded where it bounces around too much and rips the wires.
@@ScottTheFixItGuyChannel buy a new what?
The lid lock light is on for me but the spin and rinse buttons are both blinking when it should be spinning
Thanks Matt,
I think the lid lock sensor needs to be replaced 👍
@@ScottTheFixItGuyChannel I appreciate the reply. Yeah I ordered the part on eBay yesterday. Im hoping that's the problem. If not I'll have my landlord get it fixed. I just don't like to wait around for people if it's something I can do myself in 10 minutes
Can the spin cycle work if the wires to the magnetic lid lock look like they've been severed?
Great question.
You’ve got to replace that magnetic switch.
@@ScottTheFixItGuyChannelthat would include the entire wiring system with magnet? ...the wires go through the entire covered tubing to the circuit board.
I think you can just splice the new switch wires to the old ones nearby the switch.
@@ScottTheFixItGuyChannel thank you...the wires are multiple, very fine wires and not enough coming out of "magnetic" strip. However it got severed, they severed it right near the magnetic strip.
@@ScottTheFixItGuyChannel thank you for your thoughts and suggestions..I do think we'll have to resort to a new W/D.
Mine isn't powering up none at all...only dryer motor...any idea on what I can check?
Can you send that same question to my email? At: scottthefixitguy@yahoo.com
Have the same stackable but my dryer has power but my washer doesn't what can it be
The lid switch wires are severed. The "lid lock modular" was already replaced.
Anyone know the model # of this washer/dryer?
GUD27ESSMWW
Mine won't spin but still has the red light it makes a clicking sound and nothing happens. Clothes are still a little wet..
Thomas after replacing the lid switch and plugging in the unit all lights began flashing and reset steps didn't work. Any suggestions?
Thomas did it turn out to be the washer belt?
Put new lid lock in still won't drain
I think something is blocking the drain impeller from spinning
@@ScottTheFixItGuyChannel sock or small thing in impeller.